papampi
Full Member
 Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
 |
December 16, 2017, 07:55:10 AM |
|
Thanks to all whom helped us testing nvOC v0019-2.0 Community Release.
Testing is almost done and we will start making the full image install any time soon.
If you caught any bugs please send me, Stubo or Leenoox a PM or post in forum so we can correct it before releasing the full image.
Keep calm and carry on mining.
|
|
|
|
|
|
|
|
|
You get merit points when someone likes your post enough to give you some. And for every 2 merit points you receive, you can send 1 merit point to someone else!
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
subie
Newbie
Offline
Activity: 61
Merit: 0
|
|
December 16, 2017, 08:51:04 AM
Last edit: December 16, 2017, 09:20:06 AM by subie |
|
How do you load all 8 - 10 gpus with risers on the motherboard? can you put all gpus on the motherboard at the same time and it will load all the gpus?
In windows, you have to put gpus 1 at a time. is it different in linux?
Thank you!
|
|
|
|
|
Stubo
Member
Offline
Activity: 224
Merit: 13
|
|
December 16, 2017, 09:32:51 AM |
|
After applying nvOC-19-2-update, one of the rigs probably doesn't boot to desktop cause VNC doesn't work, can access it by SSH or nvOC web interface:
nvOC v0019-2.0 - Community Release
Worker : 230
Boot Time: 2017-12-15 21:33:03
System Up Time: up 47 minutes
Miner Up Time: 00:00
Distro: Ubuntu 16.04.3 LTS 4.4.0-97-generic
CPU: Intel(R) Pentium(R) CPU G4600 @ 3.60GHz
Disk / Free Disk: 14G / 4.1G
Memory / Free Memory: 3917 / 3558
Load Average: 0.00 0.00 0.00
Nvidia Driver Version:
Reboot Required: No
Auto Temp Control: Enabled, Not Running
Watch Dog: Enabled, Not Running
Gpu Count:
GPU Target Temp: 65
GPU Minimum Fan Speed: 30
GPU Utilization: NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.
Currently Mining: BTG
Auto Switcher: WTM Profit Check Running.
BTC PRICE: 17729 USD
WTM Current Profitabilty: BTG:103 % ETH:100 % ZEN:82 % ZEC:81 % FTC:60 %
WTM Current Revenue: BTG:13.67 ETH:13.24 ZEN:10.81 ZEC:10.69 FTC:7.98
Miner Hash Rate / Output:
GPU Temp, Fan and Power Info:
GPU Temp, Fan and Power Alerts:
Watch Dog Alerts:
How can I fix Nvidia driver?
The update scripts pulls and installs all available updates for the ubuntu system. Please make sure that you don't interrupt this process, wait few minutes to finish. Once finished you will need to reboot for the changes and updates to take effect. We have tested updating from 0019-1.4 to 0019-2.0 on many rigs and worked well. Please note, this is still beta release so until it's confirmed bug free and ready for final release the upgrade path is from working 0019-1.4 to 0019.2.0 Once finalyzed we will release full 0019-2.0 image, as well as final update script for those that want to upgrade from 0019-1.4 Thank you for testing and reporting back. If you haven't resolved this yet, I have personally experienced a similar issue and have this in my notes as a fix: ### Fix for nvidia-smi not found
# Box was rebooted while making kernel updates
sudo dpkg --configure -a
Hope this helps. |
|
|
|
|
WaveFront
Member
Offline
Activity: 126
Merit: 10
|
|
December 16, 2017, 09:34:40 AM |
|
Thanks to all whom helped us testing nvOC v0019-2.0 Community Release.
Testing is almost done and we will start making the full image install any time soon.
If you caught any bugs please send me, Stubo or Leenoox a PM or post in forum so we can correct it before releasing the full image.
Keep calm and carry on mining.
Where can I download the latest update script for the nvOC v0019-2.0 Community Release? Would it help if I participate to the test (very late) it or would it be better if I wait for the final image? |
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 16, 2017, 10:13:00 AM |
|
How do you load all 8 - 10 gpus with risers on the motherboard? can you put all gpus on the motherboard at the same time and it will load all the gpus?
In windows, you have to put gpus 1 at a time. is it different in linux?
Thank you!
On nvOC first boot: You should disable integrated graphic from bios, connect 1 card to main PCIe slot (closest to cpu) and connect monitor to it. Boot nvOC, wait for it to load and if needed it will reboot. Then shut down, connect all cards, reboot. No need to add one at a time like windows ... keep calm and carry on mining ... |
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 16, 2017, 10:15:18 AM
Last edit: December 17, 2017, 09:04:29 AM by papampi |
|
Thanks to all whom helped us testing nvOC v0019-2.0 Community Release.
Testing is almost done and we will start making the full image install any time soon.
If you caught any bugs please send me, Stubo or Leenoox a PM or post in forum so we can correct it before releasing the full image.
Keep calm and carry on mining.
Where can I download the latest update script for the nvOC v0019-2.0 Community Release? Would it help if I participate to the test (very late) it or would it be better if I wait for the final image? Testing is almost done, But it would be great if more people test so we make sure all is good for image release. Testing - 19-2.0 Community Release Update Script |
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 16, 2017, 10:56:00 AM
Last edit: December 16, 2017, 11:08:19 AM by papampi |
|
Submitting bugs and problems for nvOC-19-2.0 Run: It will output system report similar to this : Software info:
Report ver : v0019-2.0.002
nvOC (1bash) : nvOC v0019-2.0 - Community Release
nvOC (3main) : nvOC v0019-2.0 - Community Release
1bash ver : v0019-2.0.001
3main ver : v0019-2.0.003
5watchdog ver : v0019-2.0.010
6tempcontrol v: v0019-2.0.002
Kernel : 4.4.0-104-generic
OS : Ubuntu 16.04.3 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.5)
nvidia driver : 387.34
Hardware info:
Motherboard : MSI Z170A XPOWER GAMING TITANIUM EDITION(MS-7968) 3.0
BIOS ver. : 1.C0 05/08/2017
CPU Model : Pentium(R) CPU G4400 @ 3.30GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 4007084 kB
Mem Free : 137048 kB
Swap Total : 8388604 kB
Swap Free : 8336300 kB
Ethernet : Intel I219-V (rev 31)
HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 111.8G disk 0 0 sata ATA SPCC Solid State 71.1
|-sda1 9M vfat part 0 0
|-sda2 103.8G ext4 part 0 0 /
`-sda3 8G swap part 0 0 [SWAP]
VGA info:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
1bash settings:
1bash version .............: v0019-2.0.001
LOCAL or REMOTE ...........: REMOTE
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES
Temp Control ..............: YES
TARGET_TEMP ...............: 70
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 50
CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: STABLE
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO
BaliMiner_TELEGRAM_ALERTS .: NO
P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 76
CORE_OVERCLOCK (global)....: 150
MEMORY_OVERCLOCK (global) .: 800
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: YES
GLOBAL_WORKERNAME .........: YES
AUTO_WORKERNAME ...........: HOST
WORKERNAME ................: 100
plusCPU ...................: NO
ZM_or_EWBF ................: ZM
COIN ......................: ZEC
ZEC_WORKER ................: nv100
ZEC_ADDRESS ...............: papampi...
ZEC_POOL ..................: europe.equihash-hub.miningpoolhub.com
ZEC_PORT ..................: 20570
Copy all Text between the 2 "code" and post here in forum |
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 16, 2017, 11:08:05 AM |
|
./nvOC Usage for 19-2.0 Community Release:
Usage: ./nvOC clearlogs
clears out OS & nvOC logs
./nvOC gpuinfo
displays GPU ID, infomation, settings, and status
./nvOC gpumap
physically map (locate) your GPU's
./nvOC report
create report about hardware and nvOC relevant settings
./nvOC patch
stops nvOC and applies outstanding Ubuntu patches and
Nvidia driver updates
./nvOC reboot
reboots the host machine
./nvOC stop
stops mining, watchdog and temperature control
./nvOC start
starts normal nvOC mining operations
./nvOC miner-log
display live miner output
./nvOC wdog-log
display live watchdog output (Only for REMOTE)
./nvOC temp-log
display live temp control output (Only for REMOTE)
./nvOC wtm-log
display live wtm auto switch output
./nvOC master-log
display live miner, watchdog, temp control and wtm auto switch output
|
|
|
|
CryptAtomeTrader44
Full Member
Offline
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
|
|
December 16, 2017, 12:39:04 PM |
|
Questions about Vivo Coin, i need some advices about it : It seems that this coin be stable and profitable since i can see it in WTM coin list, but we don't know who is behind this coin not even on their own official page !  Is this coin is more risky than others listed on WTM ?  I wonder for weeks on this piece ... 1/ Is anyone tried this neoscrypt miner software ? NSGminer : https://bitcointalk.org/index.php?topic=712650.0if so, did you get better performance (hash rate and power consumption) than with other mining software? 2/ Is someone here mine Vivo coin ? If so, can you tell us which pool do you choose because there are a lot listed on their btctalk thread but, i can't détermine which is better to choose. ( https://bitcointalk.org/index.php?topic=2110690.0) |
|
|
|
|
|
martyroz
|
|
December 16, 2017, 11:08:07 PM |
|
Hmm... using a ASUS Prime Z270-P with nvOC;
both 16x slots work fine
PCIE1x_1 and PCIE1x_2 work fine
but PCIE1x_3 and PCIE1x_4 will not detect a card...
I've swapped cards from 1 and 2 to 3 and 4 and at all times, 1 and 2 work while 3 and 4 are not detected.
Is it some motherboard setting perhaps?
|
|
|
|
|
thaelin
Newbie
Offline
Activity: 64
Merit: 0
|
|
December 17, 2017, 01:43:46 AM |
|
@marty
Just checked to make sure and my Z270 is running 5 cards at the moment. Only 1 and last 1X slots are empty and running great. Sounds like you have a bad MB to me.
thay
|
|
|
|
|
HyPyk
Newbie
Offline
Activity: 27
Merit: 0
|
|
December 17, 2017, 02:00:04 AM |
|
Hmm... using a ASUS Prime Z270-P with nvOC;
both 16x slots work fine
PCIE1x_1 and PCIE1x_2 work fine
but PCIE1x_3 and PCIE1x_4 will not detect a card...
I've swapped cards from 1 and 2 to 3 and 4 and at all times, 1 and 2 work while 3 and 4 are not detected.
Is it some motherboard setting perhaps?
try nvOC beta or windows, you will see if it is software or hardware problem and start troubleshooting from there |
|
|
|
|
monck
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 17, 2017, 02:47:02 AM |
|
Software info:
Report ver : v0019-2.0.002
nvOC (1bash) : nvOC v0019-2.0 - Community Release
nvOC (3main) : nvOC v0019-2.0 - Community Release
1bash ver : v0019-2.0.002
3main ver : v0019-2.0.004
5watchdog ver : v0019-2.0.011
6tempcontrol v: v0019-2.0.003
wtm switch ver: v0019-2.0.006
Kernel : 4.4.0-97-generic
OS : Ubuntu 16.04.3 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4)
nvidia driver : 387.12
Hardware info:
Motherboard : ASRock H110 Pro BTC+
BIOS ver. : P1.10 06/20/2017
CPU Model : Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 8130264 kB
Mem Free : 5050284 kB
Swap Total : 0 kB
Swap Free : 0 kB
Ethernet : Intel I219-V (rev 31)
HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 29.9G disk 1 1 usb Lexar USB Flash Drive PMAP
├─sda1 9M vfat part 1 1 /media/m1/12D3-A8691
└─sda2 13.7G ext4 part 1 1 /
VGA info:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
1bash settings:
1bash version .............: v0019-2.0.002
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: YES
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES
Temp Control ..............: YES
TARGET_TEMP ...............: 67
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 40
CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: BETA
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: NO
TELEGRAM_ALERTS .: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 130
CORE_OVERCLOCK (global)....: 200
MEMORY_OVERCLOCK (global) .: 700
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: NO
GLOBAL_WORKERNAME .........: NO
AUTO_WORKERNAME ...........: HOST
WORKERNAME ................: 241
plusCPU ...................: NO
ZM_or_EWBF ................: EWBF
EWBF_VERSION ..............: 3_4
EWBF_PERCENT ..............: 0
COIN ......................: ZEC
ZEC_WORKER ................: 101
ZEC_ADDRESS ...............: acs...
ZEC_POOL ..................: europe.equihash-hub.miningpoolhub.com
ZEC_PORT ..................: 20570
[\code]
I am testing 19.2 but have the problem that the mining process will be terminated, watchdog process too.
Mostly after the miner was switching based on Algo change. Checked also on a second rig with only one 1070TI.
Thanks for your work - any ideas? |
|
|
|
|
quasarix
Newbie
Offline
Activity: 8
Merit: 0
|
|
December 17, 2017, 04:18:38 AM |
|
Stupid question  Can you use this on amd RX cards ? |
|
|
|
|
|
joshuajones02
|
|
December 17, 2017, 04:22:47 AM |
|
Stupid question Can you use this on amd RX cards ? theres another thread/version for AMD cards Check out rxOC here https://bitcointalk.org/index.php?topic=1984302.0 |
|
|
|
|
martyroz
|
|
December 17, 2017, 04:55:33 AM |
|
@marty
Just checked to make sure and my Z270 is running 5 cards at the moment. Only 1 and last 1X slots are empty and running great. Sounds like you have a bad MB to me.
thay
Silly me didn't have 4G Decoding = enabled  It's working now!  |
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 17, 2017, 07:24:38 AM |
|
Software info:
Report ver : v0019-2.0.002
nvOC (1bash) : nvOC v0019-2.0 - Community Release
nvOC (3main) : nvOC v0019-2.0 - Community Release
1bash ver : v0019-2.0.002
3main ver : v0019-2.0.004
5watchdog ver : v0019-2.0.011
6tempcontrol v: v0019-2.0.003
wtm switch ver: v0019-2.0.006
Kernel : 4.4.0-97-generic
OS : Ubuntu 16.04.3 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4)
nvidia driver : 387.12
Hardware info:
Motherboard : ASRock H110 Pro BTC+
BIOS ver. : P1.10 06/20/2017
CPU Model : Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 8130264 kB
Mem Free : 5050284 kB
Swap Total : 0 kB
Swap Free : 0 kB
Ethernet : Intel I219-V (rev 31)
HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 29.9G disk 1 1 usb Lexar USB Flash Drive PMAP
├─sda1 9M vfat part 1 1 /media/m1/12D3-A8691
└─sda2 13.7G ext4 part 1 1 /
VGA info:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
1bash settings:
1bash version .............: v0019-2.0.002
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: YES
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES
Temp Control ..............: YES
TARGET_TEMP ...............: 67
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 40
CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: BETA
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: NO
TELEGRAM_ALERTS .: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 130
CORE_OVERCLOCK (global)....: 200
MEMORY_OVERCLOCK (global) .: 700
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: NO
GLOBAL_WORKERNAME .........: NO
AUTO_WORKERNAME ...........: HOST
WORKERNAME ................: 241
plusCPU ...................: NO
ZM_or_EWBF ................: EWBF
EWBF_VERSION ..............: 3_4
EWBF_PERCENT ..............: 0
COIN ......................: ZEC
ZEC_WORKER ................: 101
ZEC_ADDRESS ...............: acs...
ZEC_POOL ..................: europe.equihash-hub.miningpoolhub.com
ZEC_PORT ..................: 20570
I am testing 19.2 but have the problem that the mining process will be terminated, watchdog process too. Mostly after the miner was switching based on Algo change. Checked also on a second rig with only one 1070TI. Thanks for your work - any ideas? Yes it should be terminated and start again WTM Auto Switch Logic is : if ALGO_SPECIFIC_OC="NO", it only restart miner and watchdog (to prevent wdog from catching low util and restart again) if ALGO_SPECIFIC_OC="YES", it checks coins algo if algo changed, it restart watchdog, temp control and 3main so specific algo takes effect if algo not changed, it only restart watchdog and miner You will see a miner terminated in gnome-terminal when algo not changed, if you check wtm tab you see it started with new command line and you can watch miner output log with: I have some ideas for next version to show the miner info in a new tab when miner terminated. |
|
|
|
|
mikespax
|
|
December 17, 2017, 07:34:03 AM |
|
Should we maybe retire this thread for a new one unless fullzero is coming back? Just worried about the outdated initial post throwing newbies off completely. It's probably impossible to follow development now.
|
Bitrated user: mikespax.
|
|
|
WaveFront
Member
Offline
Activity: 126
Merit: 10
|
|
December 17, 2017, 09:01:33 AM |
|
Thanks to all whom helped us testing nvOC v0019-2.0 Community Release.
Testing is almost done and we will start making the full image install any time soon.
If you caught any bugs please send me, Stubo or Leenoox a PM or post in forum so we can correct it before releasing the full image.
Keep calm and carry on mining.
Where can I download the latest update script for the nvOC v0019-2.0 Community Release? Would it help if I participate to the test (very late) it or would it be better if I wait for the final image? Testing is almost done, But it would be great if more people test so we make sure all is good for image release. Testing - 19-2.0 Community Release Update Script Hi Papampi, In the file that I downloaded I cannot find the update script. I can see the release notes and all the new scripts, but the update script is missing. What is the update procedure? |
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 17, 2017, 09:03:59 AM |
|
Thanks to all whom helped us testing nvOC v0019-2.0 Community Release.
Testing is almost done and we will start making the full image install any time soon.
If you caught any bugs please send me, Stubo or Leenoox a PM or post in forum so we can correct it before releasing the full image.
Keep calm and carry on mining.
Where can I download the latest update script for the nvOC v0019-2.0 Community Release? Would it help if I participate to the test (very late) it or would it be better if I wait for the final image? Testing is almost done, But it would be great if more people test so we make sure all is good for image release. Testing - 19-2.0 Community Release Update Script Hi Papampi, In the file that I downloaded I cannot find the update script. What is the update procedure? Sorry, My mistake, this is the correct link |
|
|
|
|
