[4+ EH] Slush Pool (slushpool.com); Overt AsicBoost; World First Mining Pool

[dmwardjr]

Finished mowing the yard.

Back inside and straightened up [just a little bit] after hooking up the 13th S3.  I am so looking forward to those other 3 S3's getting here Monday.

I'm chilling the rest of the day.  I'll work on the sub panel this evening [maybe] but most certainly tomorrow.

I've been remodeling the downstairs.  That is new tile on the floor.  That's also why you do not see base molding yet [remodeling].



48-Port Gigabit Rackmount Switch by TP-LINK
TL-SG1048

Highlights:
48 10/100/1000Mbps RJ45 ports
Innovative energy-efficient technology saves power up to 70%
Supports MAC address self-learning and auto MDI/MDIX
Standard 19-inch rack-mountable steel case

The 48-Port Gigabit Switch TL-SG1048 is designed to meet the needs of the most demanding workgroup and departmental connectivity requirements. A reliable, easy-to-use switch without the complexity of management, the TL-SG1048 provides 48 10/100/1000Mbps ports. The TL-SG1048 combines ease of use with unsurpassed performance resulting in an exceptional value for any cost-conscious network administrator who wants the best possible solution at the best possible price.

[Billbags]

I love new miner porn

[dmwardjr]

I love new miner porn

LOL

 

never heard it spoken that way before.

lol

[pekatete]

Finished mowing the yard.

Back inside and straightened up [just a little bit] after hooking up the 13th S3.  I am so looking forward to those other 3 S3's getting here Monday.

I'm chilling the rest of the day.  I'll work on the sub panel this evening [maybe] but most certainly tomorrow.

I've been remodeling the downstairs.  That is new tile on the floor.  That's also why you do not see base molding yet [remodeling].

EDIT: >>> redacted image <<<

I think your next step will be to manage that exhaust efficiently, including that from the PSU's. With your setup, I'd be tempted to simply muzzle each exhaust fan and redirect either outside or to heating, but you have the PSU hest to contend with. I keep my rig in the garden (I built a fairly water-tight cubicle for them from scavenged kitchen cabinets) and simply exhaust it out, and the ambient is never that high (even in the just ended HOT summer here!).

[dmwardjr]

i have no clue WHY they are keeping me at "activity 28." and a "newbie."  NO IDEA?

Somebody doesn't like me.

That's cool...

[dmwardjr]

Finished mowing the yard.

Back inside and straightened up [just a little bit] after hooking up the 13th S3.  I am so looking forward to those other 3 S3's getting here Monday.

I'm chilling the rest of the day.  I'll work on the sub panel this evening [maybe] but most certainly tomorrow.

I've been remodeling the downstairs.  That is new tile on the floor.  That's also why you do not see base molding yet [remodeling].

EDIT: >>> redacted image <<<

I think your next step will be to manage that exhaust efficiently, including that from the PSU's. With your setup, I'd be tempted to simply muzzle each exhaust fan and redirect either outside or to heating, but you have the PSU hest to contend with. I keep my rig in the garden (I built a fairly water-tight cubicle for them from scavenged kitchen cabinets) and simply exhaust it out, and the ambient is never that high (even in the just ended HOT summer here!).

My plans are to build a cubical out of 2x4 framing and plywood walls with hinged doors for access RIGHT IN FRONT OF THE WINDOW.  

I want to have 3 exhaust fans.

1st for exhaust to suck heat out of the window during the summer with switch to turn off or on.
2nd to suck air into the cubical with switch to turn of or on.
3rd built up high in the cubical facing into the recreation room downstairs to turn on during the winter to heat the house.  The room is downstairs.  Heat rises and these things put out LOTS of heat.

It is a double hung window.  I'm taking the windows out and putting plywood in their place with holes cut into it for the exhaust fans.  I will put siding on the plywood from the outside to keep the plywood safe from water so it doesn't warp or mildew.

[dmwardjr]

I want to attach the following to the side of the inclosed cubical I build:  It is an air-conditioner for server cabinets.

$599.00 on Amazon.

GO TO THIS LINK:

http://www.amazon.com/Tripp-Lite-SRCOOL12K-Portable-Conditioner/dp/B002XITVCK/ref=sr_1_1?s=electronics&ie=UTF8&qid=1413068428&sr=1-1&keywords=server+air+conditioner

It got 4 out of 5 stars from 88 reviews.

[pekatete]

My plans are to build a cubical out of 2x4 framing and plywood walls with hinged doors for access RIGHT IN FRONT OF THE WINDOW.  

I want to have 3 exhaust fans.

1st for exhaust to suck heat out of the window during the summer with switch to turn off or on.
2nd to suck air into the cubical with switch to turn of or on.
3rd built up high in the cubical facing into the recreation room downstairs to turn on during the winter to heat the house.  The room is downstairs.  Heat rises and these things put out LOTS of heat.

It is a double hung window.  I'm taking the windows out and putting plywood in their place with holes cut into it for the exhaust fans.  I will put siding on the plywood from the outside to keep the plywood safe from water so it doesn't warp or mildew.

You know I mentioned how fast ASIC rigs depreciate? If I were you, I'd desist from making major structural changes to your house to cater for a particular ASIC rig. And like you said, your next rigs are S4's and they may require a different setup to the S3's and in any case both of which may turn out to be obsolete within the year!

But yeah, using the heat exhausted for this winter's heating is definitely one I have on the radar too.

[dmwardjr]

My plans are to build a cubical out of 2x4 framing and plywood walls with hinged doors for access RIGHT IN FRONT OF THE WINDOW.  

I want to have 3 exhaust fans.

1st for exhaust to suck heat out of the window during the summer with switch to turn off or on.
2nd to suck air into the cubical with switch to turn of or on.
3rd built up high in the cubical facing into the recreation room downstairs to turn on during the winter to heat the house.  The room is downstairs.  Heat rises and these things put out LOTS of heat.

It is a double hung window.  I'm taking the windows out and putting plywood in their place with holes cut into it for the exhaust fans.  I will put siding on the plywood from the outside to keep the plywood safe from water so it doesn't warp or mildew.

You know I mentioned how fast ASIC rigs depreciate? If I were you, I'd desist from making major structural changes to your house to cater for a particular ASIC rig. And like you said, your next rigs are S4's and they may require a different setup to the S3's and in any case both of which may turn out to be obsolete within the year!

But yeah, using the heat exhausted for this winter's heating is definitely one I have on the radar too.

It will be just this one set up.  I have 2 more empty shelves on top [that you do not see in the pic] and 1 empty on the bottom to hold my S4's.  Their is room for adjustment on the racks to make plenty of room for approximately 36 S4's turned on their sides IF I got rid of the S3's.  However, I don't have the AMPS in this house for 36 S4's.  17,000 to 18,000 watts is the max I will go.

[pekatete]

I want to attach the following to the side of the inclosed cubical I build:  It is an air-conditioner for server cabinets.

$599.00 on Amazon.

SOMEBODY DOES NOT LIKE ME.

THEY WONT LET ME POST AN IMAGE NOW.

GO TO THIS LINK:

http://www.amazon.com/Tripp-Lite-SRCOOL12K-Portable-Conditioner/dp/B002XITVCK/ref=sr_1_1?s=electronics&ie=UTF8&qid=1413068428&sr=1-1&keywords=server+air+conditioner

That is impressive! You sure are putting some outlay on your rigs! I wonder what hashing power for a set period you'd need to ROI with that installed? Saying that, is your best option mining in a pool rather than running your own P2Pool node? I've promised myself a couple of S4's (if I can get them in the next month) and I will then revert to my own node. I live near an exchange so latency "should" not be an issue.

[dmwardjr]

I want to attach the following to the side of the inclosed cubical I build:  It is an air-conditioner for server cabinets.

$599.00 on Amazon.

SOMEBODY DOES NOT LIKE ME.

THEY WONT LET ME POST AN IMAGE NOW.

GO TO THIS LINK:

http://www.amazon.com/Tripp-Lite-SRCOOL12K-Portable-Conditioner/dp/B002XITVCK/ref=sr_1_1?s=electronics&ie=UTF8&qid=1413068428&sr=1-1&keywords=server+air+conditioner

That is impressive! You sure are putting some outlay on your rigs! I wonder what hashing power for a set period you'd need to ROI with that installed? Saying that, is your best option mining in a pool rather than running your own P2Pool node? I've promised myself a couple of S4's (if I can get them in the next month) and I will then revert to my own node. I live near an exchange so latency "should" not be an issue.

LOL

I was actually looking into the same thing on P2Pool last night.  However, it is something else I have to look up on youtube and google to educate myself.



You see how much more room I have?  Don't forget the bottom shelf not in the picture.  I know there is room for at least 30 S4's

[pekatete]

^^^^ No doubt, you have enough space!
And neither am I so conversant with the merits of either, nevertheless, despite being in a different league than you are in terms of hashing power, I'll be running a node when I get my puny S4's on board!
BTW, you also may be ripe for mining through a proxy, but again not much guidance from this end!

EDIT: -Did you just see that? We won a 4 second block!

EDIT2: - Nooooo! Same block number!

[dmwardjr]

This is with 23.7 Th/s [8 S4's and 16 S3's and other accessories; such as air conditioner unit.]  $17,480.00  with 3 month time frame and BTC @ $400.00

Difficulty   35,002,482,026.00
Mining Factor 100   0.00 USD/24h@100MHash/s as in these charts
Average generation time for a block (solo)   73 days, 10 hours (can vary greatly depending on your luck)
Hardware break even   262 days
Net profit first time frame   -10689.21 USD

Coins per 24h at these conditions   0.3405 BTC
Power cost per 24h   59.40 USD
Revenue per day   136.43 USD
Less power costs   77.03 USD
System efficiency   1436.36 MH/s/W
Mining Factor 100 at the end of the time frame   0.00 USD/24h@100MHash/s
Average Mining Factor 100   0.00 USD/24h@100MHash/s
Power cost per time frame   5423.96 USD
Revenue per time frame (3 months)   11718.75 USD
Less power costs   6294.79 USD

[wasikidding]

sucks 4 second block is an orphan to our 8 hr block lol

[dmwardjr]

^^^^ No doubt, you have enough space!
And neither am I so conversant with the merits of either, nevertheless, despite being in a different league than you are in terms of hashing power, I'll be running a node when I get my puny S4's on board!
BTW, you also may be ripe for mining through a proxy, but again not much guidance from this end!

EDIT: -Did you just see that? We won a 4 second block!

wow

No didn't see it

[dmwardjr]

sucks 4 second block is an orphan to our 8 hr block lol

DAMN

[pekatete]

sucks 4 second block is an orphan to our 8 hr block lol

Bummer!

[pekatete]

This is with 23.7 Th/s [8 S4's and 16 S3's and other accessories; such as air conditioner unit.]  $17,480.00

Difficulty   35,002,482,026.00
Mining Factor 100   0.00 USD/24h@100MHash/s as in these charts
Average generation time for a block (solo)   73 days, 10 hours (can vary greatly depending on your luck)
Hardware break even   262 days
Net profit first time frame   -10689.21 USD

Coins per 24h at these conditions   0.3405 BTC
Power cost per 24h   59.40 USD
Revenue per day   136.43 USD
Less power costs   77.03 USD
System efficiency   1436.36 MH/s/W
Mining Factor 100 at the end of the time frame   0.00 USD/24h@100MHash/s
Average Mining Factor 100   0.00 USD/24h@100MHash/s
Power cost per time frame   5423.96 USD
Revenue per time frame   11718.75 USD
Less power costs   6294.79 USD

With that hashing power, I'd have my own solo pool (using the ckpool code) and a P2Pool node. Would definitely mine solo every other fortnight for at least a week depending on fortnight's earnings.

FORGOT TO ADD: - At current difficulty (different animal next year!)

[dmwardjr]

This is with 23.7 Th/s [8 S4's and 16 S3's and other accessories; such as air conditioner unit.]  $17,480.00 investment with BTC at $400.00

Difficulty   35,002,482,026.00
Mining Factor 100   0.00 USD/24h@100MHash/s as in these charts
Average generation time for a block (solo)   73 days, 10 hours (can vary greatly depending on your luck)
Hardware break even   262 days
Net profit first time frame   -10689.21 USD

Coins per 24h at these conditions   0.3405 BTC
Power cost per 24h   59.40 USD
Revenue per day   136.43 USD
Less power costs   77.03 USD
System efficiency   1436.36 MH/s/W
Mining Factor 100 at the end of the time frame   0.00 USD/24h@100MHash/s
Average Mining Factor 100   0.00 USD/24h@100MHash/s
Power cost per time frame   5423.96 USD
Revenue per time frame (3 Months)   11718.75 USD
Less power costs   6294.79 USD

With that hashing power, I'd have my own solo pool (using the ckpool code) and a P2Pool node. Would definitely mine solo every other fortnight for at least a week depending on fortnight's earnings.

FORGOT TO ADD: - At current difficulty (different animal next year!)

That was a 3 month period you see above starting with "Coins per 24h at this difficulty and conditions.

$6,294.79 mining at a pool.

That's with btc at $400.00  I'm hoping it would be $400.00 soon.

[dmwardjr]

This is what 3 months would be like with BTC at $362.40:

Coins per 24h at these conditions   0.3405 BTC
Power cost per 24h   59.40 USD
Revenue per day   123.49 USD
Less power costs   64.09 USD
System efficiency   1436.36 MH/s/W
Mining Factor 100 at the end of the time frame   0.00 USD/24h@100MHash/s
Average Mining Factor 100   0.00 USD/24h@100MHash/s
Power cost per time frame   5423.96 USD
Revenue per time frame   10607.28 USD
Less power costs   5183.31 USD