ChuckBuck
|
|
April 30, 2014, 02:20:54 PM |
|
Why do people still make or buy USB ASICS? I just cant see any value at all in this?
It boggles my mind as well. Minimum of 500 to order also for 10.8 BTC. WOW!
|
|
|
|
TracerX
|
|
April 30, 2014, 02:28:09 PM |
|
Why do people still make or buy USB ASICS? I just cant see any value at all in this?
1) novelty: its less than $10/usb, or a reasonable ~$4/GH. if someone wants to learn about bitcoin mining this is a nifty cheap way to do it. (of course, thats if buying from a reseller since the 500 MOQ is a bit much) 2) test-bench: I currently have my antminer S2 running at a frequency of 215.625, which I figured out myself correlates to '6206'. However, rather than test a potentially wrong asic-freq on the S2, I implement it on the U1 and let it run for 10min to see that the hashrates and temps are where I expect them, THEN i make the changes to the S2 This is dead on. A number of hobbyists want to "play with" the mining process before they decide to invest more money, which only makes sense in my mind. Using the U2 for bench-testing is brilliant. I'm going to order a couple today for just that purpose!
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4270
Merit: 8648
'The right to privacy matters'
|
|
April 30, 2014, 02:53:39 PM |
|
Why do people still make or buy USB ASICS? I just cant see any value at all in this?
1) novelty: its less than $10/usb, or a reasonable ~$4/GH. if someone wants to learn about bitcoin mining this is a nifty cheap way to do it. (of course, thats if buying from a reseller since the 500 MOQ is a bit much) 2) test-bench: I currently have my antminer S2 running at a frequency of 215.625, which I figured out myself correlates to '6206'. However, rather than test a potentially wrong asic-freq on the S2, I implement it on the U1 and let it run for 10min to see that the hashrates and temps are where I expect them, THEN i make the changes to the S2 I am attempting to create a very complete listing for freq ----hex here is the thread. https://bitcointalk.org/index.php?topic=589429.0If you would care to add to it with tested number please do. If you want a bit of btc for testing lots and making a really big list with as many as you can from freq 175 to 425 please send me a pm. I can't offer crazy money but I have not done the math to get the freq=== hex numbers in so long I would have to spend a day or two or three to figure it out. I can test your freq to hex on my s-1's and my u-2. but to have a full chart would help the entire community.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4270
Merit: 8648
'The right to privacy matters'
|
|
April 30, 2014, 02:56:05 PM |
|
0.55 btc aint that yesterdays price? Whats todays price? Daily price change init
you are correct but it is not quite 24 hours. Since the drop to .55btc. Come back in about 2 or 3 hours. Since those will be shipped only on May 4 I doubt they will drop the price until the new batch. Also does anyone have a solution for underclock beside the graphite pen trick? 140Gh for 180W is quite decent compared to S2. thats the only real way without soldering new resistors. you can underclock it at stock voltage, but it will either get lots of errors below a certain speed (lets say below 160GH?) OR it will just use way too much wattage unless you bring down the operating voltage via the pencil mod (ie: you might get 140GH/220W if you dont undervolt) bitmain could just sell us some lessor s-1's with the lower volted resistors. it would sell people would want them.
|
|
|
|
ak49er
Sr. Member
Offline
Activity: 672
Merit: 250
Buy, sell and store real cryptocurrencies
|
|
April 30, 2014, 11:31:28 PM Last edit: April 30, 2014, 11:41:56 PM by ak49er |
|
So the four free PSUs I was going to use to justify four more S1s turned out to be too good to be true. 3KW output on 220V, but only 12A @ 12V, 66A @ 42V. So all I need is a beefy 42V to 12V DC-DC converter and I'm back in business. Anyone know of such a beast? Is 30A output enough for an S1? I can get a 48V to 12V converter, but by the time I spend the money it's no better than getting a regular PSU.
|
|
|
|
s1lverbox
Legendary
Offline
Activity: 2324
Merit: 1039
|
|
April 30, 2014, 11:36:31 PM |
|
Seems funny they still making them. Anyone think they mining with this in their factory?
|
|
|
|
demonmaestro
|
|
May 01, 2014, 02:28:13 AM |
|
So the four free PSUs I was going to use to justify four more S1s turned out to be too good to be true. 3KW output on 220V, but only 12A @ 12V, 66A @ 42V. So all I need is a beefy 42V to 12V DC-DC converter and I'm back in business. Anyone know of such a beast? Is 30A output enough for an S1? I can get a 48V to 12V converter, but by the time I spend the money it's no better than getting a regular PSU. https://bitcointalk.org/index.php?topic=503423.0
|
Feel Like Donating? bc1q0v5nfdejapffewu67gft7zw7zsmnfmmkt3lf02 Buy/Sell BitCoin & LiteCoin Click here! | Looking for a great exchange? CoinBase Has you covered.
|
|
|
ak49er
Sr. Member
Offline
Activity: 672
Merit: 250
Buy, sell and store real cryptocurrencies
|
|
May 01, 2014, 03:30:58 AM |
|
So the four free PSUs I was going to use to justify four more S1s turned out to be too good to be true. 3KW output on 220V, but only 12A @ 12V, 66A @ 42V. So all I need is a beefy 42V to 12V DC-DC converter and I'm back in business. Anyone know of such a beast? Is 30A output enough for an S1? I can get a 48V to 12V converter, but by the time I spend the money it's no better than getting a regular PSU. https://bitcointalk.org/index.php?topic=503423.0Unfortunately that doesn't do me any good. The problem I have is that these power supplies output 42V. Almost 3KW worth, but ultimately useless. So I can get 12KW for free, but it's worth exactly nothing. On the plus side I was rooting around the server room and I think there might be a couple of server PSUs that I can nab instead.
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
|
May 01, 2014, 04:56:23 AM |
|
Just an idea for BITMAIN: Antminer S3 (or S1.1 - whichever floats your boat)4 boards from antminer S1 units, with undervolted resistors and shorter heatsinks, arranged as such: |==||==| each board is identical to antminer S1, but undervolted slightly to produce ~70GH per board at ~90W. This gives 280GH/360W and could probably be deigned to still fit the 120mmx120mm bracket (or a 140mm fan and bracket?) use a slightly better control board capable of handling 4 blades instead of just two. all the benefits of using a working design, a working method of shipment, 50% hashing improvement for the same wattage, and would play well with everyone who is using thier own power supplies
|
|
|
|
wpgdeez
|
|
May 01, 2014, 04:59:42 AM |
|
All of the miners from my last batch of 5 were in great new looking condition. Now that I've taken my GPU's offline I have some extra PSU's kicking around, thanks for the coupons Bitmain just ordered 9 more! Now lets work on the price for the S2, I would like to get a couple of these running next since power is now starting to become an issue but cant justify the current premium.
|
|
|
|
ZiG
|
|
May 01, 2014, 05:21:28 AM |
|
Just an idea for BITMAIN: Antminer S3 (or S1.1 - whichever floats your boat)4 boards from antminer S1 units, with undervolted resistors and shorter heatsinks, arranged as such: |==||==| each board is identical to antminer S1, but undervolted slightly to produce ~70GH per board at ~90W. This gives 280GH/360W and could probably be deigned to still fit the 120mmx120mm bracket (or a 140mm fan and bracket?) use a slightly better control board capable of handling 4 blades instead of just two. all the benefits of using a working design, a working method of shipment, 50% hashing improvement for the same wattage, and would play well with everyone who is using thier own power supplies Great idea, buddy...and @ $500-600 should be selling like popcorn...
|
|
|
|
AbiTxGroup
|
|
May 01, 2014, 05:41:50 AM |
|
Just used my coupons for another order.
Anyone in Texas have coupons that they are not planning on using to order S1's?
|
|
|
|
Biodom
Legendary
Offline
Activity: 3906
Merit: 4365
|
|
May 01, 2014, 01:05:44 PM |
|
Just used my coupons for another order.
Anyone in Texas have coupons that they are not planning on using to order S1's?
Where in TX are you? I might have 4 extra coupons.
|
|
|
|
Eotnak
Member
Offline
Activity: 117
Merit: 10
|
|
May 01, 2014, 01:55:10 PM |
|
Looking for 2 S1 coupons from a trustworthy member please. I'm in NJ if that matters, don't know how the coupon transaction would work...
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4270
Merit: 8648
'The right to privacy matters'
|
|
May 01, 2014, 05:02:55 PM |
|
Looking for 2 S1 coupons from a trustworthy member please. I'm in NJ if that matters, don't know how the coupon transaction would work...
pm me we can do something. I am in Howell NJ. I have 2 machines arriving on fri. I have one arriving on monday and I have 1 coupon left.
|
|
|
|
s1lverbox
Legendary
Offline
Activity: 2324
Merit: 1039
|
|
May 01, 2014, 05:41:40 PM |
|
OJ, so my miners turned up today. PCB marked 16.12.2013 so not that brand new or maybe im missing something. Miners itself clear and hashing away.
Thanks bitmain
|
|
|
|
s1lverbox
Legendary
Offline
Activity: 2324
Merit: 1039
|
|
May 01, 2014, 05:42:55 PM |
|
Looking for 2 S1 coupons from a trustworthy member please. I'm in NJ if that matters, don't know how the coupon transaction would work...
I have 21 s1 coupon. you can contact me if needed. I can go through escrow if you need it. Thanks.
|
|
|
|
pjcltd
Legendary
Offline
Activity: 1778
Merit: 1003
NodeMasters
|
|
May 01, 2014, 06:24:47 PM |
|
Looking for 2 S1 coupons from a trustworthy member please. I'm in NJ if that matters, don't know how the coupon transaction would work...
I have 21 s1 coupon. you can contact me if needed. I can go through escrow if you need it. Thanks. I'll vouch for s1lverbox i have done loads of trades with her all good no problems at all
|
|
|
|
s1lverbox
Legendary
Offline
Activity: 2324
Merit: 1039
|
|
May 01, 2014, 06:53:18 PM |
|
Looking for 2 S1 coupons from a trustworthy member please. I'm in NJ if that matters, don't know how the coupon transaction would work...
I have 21 s1 coupon. you can contact me if needed. I can go through escrow if you need it. Thanks. I'll vouch for s1lverbox i have done loads of trades with her all good no problems at all Thanks for that. I have as well 21xs2 $400 coupons if anyone interested. No charge what so ever for it.
|
|
|
|
allcoinminer
|
|
May 01, 2014, 07:18:16 PM |
|
What's the discount for S1 coupons? I need 2 S1 coupons. Please reserve 2 for me. Looking for 2 S1 coupons from a trustworthy member please. I'm in NJ if that matters, don't know how the coupon transaction would work...
I have 21 s1 coupon. you can contact me if needed. I can go through escrow if you need it. Thanks. I'll vouch for s1lverbox i have done loads of trades with her all good no problems at all Thanks for that. I have as well 21xs2 $400 coupons if anyone interested. No charge what so ever for it.
|
|
|
|
|