[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs

[Grix]

Uh oh. I just stumbled across this article: http://www.kitguru.net/components/anton-shilov/tsmc-extends-28nm-chip-lead-time-to-16-weeks-puts-chip-designers-at-risk/

Taiwan Semiconductor Manufacturing Co. has extended lead time for production of chips using 28nm process technology from ten to 16 weeks recently, a media report reads. The company reportedly claimed that the demand for 28nm manufacturing process is very high and therefore orders placed in May would take more time to complete.

According to DigiTimes, TSMC had warned its clients that orders placed this month may not be fulfilled until September or October due to tight production schedules.

[RoadStress]

my miner stopped hashing today  

ASIC STATS is empty

DCR says

DC2DC DCR inductor flag loop 0 (0xD0) = -1
i2c write 0x71 = 0x2 error2
i2c write 0x72 = 0x0 error2

E-mail zvi@

Uh oh. I just stumbled across this article: http://www.kitguru.net/components/anton-shilov/tsmc-extends-28nm-chip-lead-time-to-16-weeks-puts-chip-designers-at-risk/

Taiwan Semiconductor Manufacturing Co. has extended lead time for production of chips using 28nm process technology from ten to 16 weeks recently, a media report reads. The company reportedly claimed that the demand for 28nm manufacturing process is very high and therefore orders placed in May would take more time to complete.

According to DigiTimes, TSMC had warned its clients that orders placed this month may not be fulfilled until September or October due to tight production schedules.

Old news. August SP30 not affected!

[Grix]

Uh oh. I just stumbled across this article: http://www.kitguru.net/components/anton-shilov/tsmc-extends-28nm-chip-lead-time-to-16-weeks-puts-chip-designers-at-risk/

Taiwan Semiconductor Manufacturing Co. has extended lead time for production of chips using 28nm process technology from ten to 16 weeks recently, a media report reads. The company reportedly claimed that the demand for 28nm manufacturing process is very high and therefore orders placed in May would take more time to complete.

According to DigiTimes, TSMC had warned its clients that orders placed this month may not be fulfilled until September or October due to tight production schedules.

Old news. August SP30 not affected!

Phew!

[justice]

After some rest it works again!

I reduced the power consumtion to 1180 and the
DC2DC Current Limit to 57

my miner stopped hashing today 

ASIC STATS is empty

DCR says

DC2DC DCR inductor flag loop 0 (0xD0) = -1
i2c write 0x71 = 0x2 error2
i2c write 0x72 = 0x0 error2

Post in the thread in my sig. You tried all the restart types?

[chrono030]

2 Spondoolie SP10's for sale in NJ

If you live in or around NJ and want a couple SP10's let me know. Dad and I are selling ours that we just received this week. Both work perfectly, are built like tanks but just a little too noisy for us in our homes. My girlfriend rules my world I guess. We just don't have the accommodations and setup like some of you have at home so that's why we are selling them. And it kills me as I write this because bitcoin is now over $600.

We paid $2795+$193 shipping = $2988

We are selling both for $5200, which is $2600 for each one. Gives you almost $400 off each one. Please, the price is firm.

If you are interested please message me here on the forums and I'll give you my contact information. I would need to drive my SP10 to my Dad's place, which is a couple hours away so if you are interested please contact me as soon as you can. I'll check the forums as much as I can today.

Thank you,

Michael

just added this:
=====================
URL: http://www.michigan-colocation.com/index.php/server-colocation/bitcoin-miner-hosting
Price: SP10-~$150/mth, S2-$150/mth, Cointerra $330/mth, mth to mth, no setup fee
Location: Troy, MI 48083
Comment:
Thread: http://www.webhostingtalk.com/showthread.php?t=1379980
=====================

Why not colocate them here?

Nice!  These guys are super close to me (about 20 minutes).  I can vouch for them, as my buddy had a colo'd server that ran ventrilo for me & friends.

[Zelek Uther]

Anyone proof of these devices...Anyone has a model running or has been delivered??? Or to good to be true...

I've got one. It is absolutely superb, a masterpiece of engineering. A professional server-grade miner.

Designed for data centres. Too loud for home use, unless you have sound-proofing e.g. a special rack cabinet.

[Guy Corem]

Hosting clients:

We're doing enhancements and expanding works in our DC.
During the work, you might notice hash-rate drop.
Keep an eye on your loses, we'll compensate you.

Regards,
Guy

[wanna4fun]

After some rest it works again!

I reduced the power consumtion to 1180 and the
DC2DC Current Limit to 57

my miner stopped hashing today  

ASIC STATS is empty

DCR says

DC2DC DCR inductor flag loop 0 (0xD0) = -1
i2c write 0x71 = 0x2 error2
i2c write 0x72 = 0x0 error2

Post in the thread in my sig. You tried all the restart types?

same issue but mine is not responding anymore after I downgrade the firmware... in add of, the minergate process was rebooting all the time...
i go to the datacenter to re-image it.

btw my others SP10 doesn't have any issue.

[kickdapa]

Are the SP10 units still shipping???

[Bicknellski]

Are the SP10 units still shipping???

SP10 DAWSON - IMMEDIATE DELIVERY

$2,795.00
We accept payment in Bitcoin, Dollars, or Euro. Prices given in dollars.

http://www.spondoolies-tech.com/products/sp10-dawson-may-second-batch

According to the website they are...

[Bicknellski]

They might be on holidays...

Due to Shavuot ("Feast of Weeks", Pentecost) holiday, shipments will be done on Saturday night, Monday and Thursday.

They can do larger orders and better rates I am pretty sure. Talk to Roadstress in PM he can help you track down the STech guys... if they are even available at this time.

[Bicknellski]

They might be on holidays...

Due to Shavuot ("Feast of Weeks", Pentecost) holiday, shipments will be done on Saturday night, Monday and Thursday.

They can do larger orders and better rates I am pretty sure. Talk to Roadstress in PM he can help you.

Thanks for that. You lot are very helpful!

You are welcome. I hope to be.

[SyRenity]

Sorry i should have included more info. I have emailed them regarding a large bulk purchase and havnt got a reply. Anyone know where to get 20 - 40 of them?

Please re-send again to sales@spondoolies-tech.com.

Thanks.

[Guy Corem]

Sorry i should have included more info. I have emailed them regarding a large bulk purchase and havnt got a reply. Anyone know where to get 20 - 40 of them?

Please email again to sales@

We're overwhelmed with requests, so might have missed your email. My apologies.
No problem to fulfill that or much larger quantity
If you'll purchase with BTC, we'll ship on Monday
If you'll purchase with wire transfer, we'll ship after confirming the funds in our account

Guy

[wanna4fun]

After some rest it works again!

I reduced the power consumtion to 1180 and the
DC2DC Current Limit to 57

my miner stopped hashing today  

ASIC STATS is empty

DCR says

DC2DC DCR inductor flag loop 0 (0xD0) = -1
i2c write 0x71 = 0x2 error2
i2c write 0x72 = 0x0 error2

Post in the thread in my sig. You tried all the restart types?

same issue but mine is not responding anymore after I downgrade the firmware... in add of, the minergate process was rebooting all the time...
i go to the datacenter to re-image it.

btw my others SP10 doesn't have any issue.

late update, up and running again.
the psu was orange. Unit cold / frozen but fan blown cold. I re-image firmware (ty for instructions) and upgraded unit. 1.5th/s on pools now amazing !

[zvisha]

After some rest it works again!

I reduced the power consumtion to 1180 and the
DC2DC Current Limit to 57

my miner stopped hashing today  

ASIC STATS is empty

DCR says

DC2DC DCR inductor flag loop 0 (0xD0) = -1
i2c write 0x71 = 0x2 error2
i2c write 0x72 = 0x0 error2

Post in the thread in my sig. You tried all the restart types?

same issue but mine is not responding anymore after I downgrade the firmware... in add of, the minergate process was rebooting all the time...
i go to the datacenter to re-image it.

btw my others SP10 doesn't have any issue.

late update, up and running again.
the psu was orange. Unit cold / frozen but fan blown cold. I re-image firmware (ty for instructions) and upgraded unit. 1.5th/s on pools now amazing !

Yes, latest image has slightly better rate in pool - that is also because of the new interface with cgminer allowing 2 shares per job. 

[wpgdeez]

Does firmware update not update image? How do you check your version?

[klondike_bar]

Received a unit today - very thoughtful design and packaging (my unit came from a skid holding several) The noise at startup with 100% fans is hilariously highpitched and loud.

currently running at 1.25TH  with 40% fans and 84C at the exhaust. At 40% fans the PSU is distinctly a bit louder. I might tweak it down aiming for 80C soon


edit: got this thing up on the windowsill and built a nice housing for it out of the carboard box/form it shipped in. does a very good job bringing noise down by about 50%. However, while the miner webpage says I have a speed of 1.295TH my eligius pool is only reporting ~1.1TH http://eligius.st/~wizkid057/newstats/userstats.php/1Kt7LQ2MgGmyAWVFr8L8qQzwPhubK2QtCM.  Input/exhaust temps are 30C/66C  (inlet is more like 23C in reality).

is this issue just related to needing a better 3hr sample or is something in need of tweaking?

[blaiser]

Received a unit today - very thoughtful design and packaging (my unit came from a skid holding several) The noise at startup with 100% fans is hilariously highpitched and loud.

currently running at 1.25TH  with 40% fans and 84C at the exhaust. At 40% fans the PSU is distinctly a bit louder. I might tweak it down aiming for 80C soon


edit: got this thing up on the windowsill and built a nice housing for it out of the carboard box/form it shipped in. does a very good job bringing noise down by about 50%. However, while the miner webpage says I have a speed of 1.295TH my eligius pool is only reporting ~1.1TH http://eligius.st/~wizkid057/newstats/userstats.php/1Kt7LQ2MgGmyAWVFr8L8qQzwPhubK2QtCM.  Input/exhaust temps are 30C/66C  (inlet is more like 23C in reality).

is this issue just related to needing a better 3hr sample or is something in need of tweaking?

Yes, wait for your 3 hour sampling that's what it uses for your estimates.

Regards,

~Blaise

[opentoe]

For some reason after multiple successful fedex deliveries... my next order was shipped DHL?

I did read they were going to try different delivery companies. I think FedEx is the best, but DHL works Saturdays, and maybe that's what their looking for.