Guy Corem (OP)
Donator
Legendary
 Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
 |
June 09, 2014, 08:03:06 AM |
|
SP30 dimensions:
554 X 431 X 88.4 [mm]
SP10 dimensions:
473 X 431 X 55.1 [mm]
Is that Depth x Width x Height? So the SP30 is deeper (longer case) than the SP10? (And 2U vs 1.25U) Yes and Yes. Information about mounting solution will be published soon. |
|
|
|
|
|
|
|
|
"You Asked For Change, We Gave You Coins" -- casascius
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
zvisha
|
|
June 09, 2014, 12:48:15 PM |
|
Hey Zvi,
i had one of my SP10 units temporarily installed till we get the new air conditioner in the storage room.
Last night it stopped hashing so I checked on it this morning.
Suprisingly I found out that it took a dive off the shelf from about 1m height and landed between some pallets.
The damage is only cosmetic but I'm posting the pictures to tell me if you think I should open it and check something inside.
It seems to hash OK although the power on AC2DC doesn't go up to 1265. I had the same issue about 1 week ago and with a couple reboots it started to go up again. Currently it's hashing at 1.37Th/s - while it normally hashes at 1.42TH/s.
Note that it is plugged in with a lot of other devices so the power again might not be enough. This will be solved when the new air conditioner is installed and moved to its place. Let me know if you think something else is at fault.
Here is AC2DC value:
AC2DC power=1208[1265], temp=0, leading zeroes=39
We did not test this usage scenario, so it is hard for me to advise  Please post your ASIC stats page and DCR page. |
|
|
|
|
|
|
|
zvisha
|
|
June 09, 2014, 02:49:57 PM |
|
All 110V users
Hello to all our new world clients.
It looks like for the 110V the optimal starting voltage is 0.650V or even 0.645V.
Please update your settings and you might get better hashing rate (wait for 30 minutes after reset to see where miner settles).
|
|
|
|
|
ElectricSavant
Newbie
Offline
Activity: 32
Merit: 0
|
|
June 09, 2014, 02:51:42 PM
Last edit: June 09, 2014, 03:07:41 PM by ElectricSavant |
|
Can you organize a group buy for SP30 September batch Roadstress? I'm sure folks would be interested if the price was right. I am interested to participate in a group buy. A friend of mine, that is into mining big time, will also be interested. I just got started in this thing and I think he is jealous about how fast I have moved...HeHe I am already mining with various equipment haggled for on EBAY and I am pulling 180 mh/s out of it over at Slushy. 6 Th/s well that is a dream! I have discovered that I need more efficiency to grow the way I want to. Buying used singles and cubes on Ebay will max out my power consumption in my home in no time...I only have a 200 amp service HeHe...my current efficiency sucks. The only way I could get started was to buy equipment at a reasonable investment to try and get an ROI in 3 or 4 months. This Yukon will blast my projections....lets do this thing! ElectricSavant™ |
|
|
|
|
Biodom
Legendary
Offline
Activity: 3738
Merit: 3844
|
|
June 09, 2014, 03:16:30 PM |
|
Spondoolies-will you have new Sp-10 soon or not? It abruptly disappeared to out of stock. It takes time to make hosting arrangement and then-poof, it's gone.
Disappointed.
|
|
|
|
|
opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
|
June 09, 2014, 03:24:30 PM
Last edit: June 09, 2014, 03:37:31 PM by opentoe |
|
Noooooooo…SP10 Dawson Mid June Batch is out of stock.
Spondoolies-Tech, is there any chance you may open up for more orders or another batch of the SP10?
this is the final batch of SP10, i'm led to believe. There will be no more SP10 made - Spondoolies-Tech posted up the thread that this is the case. best you get your order in for SP30 before they all sell out! Thanks for the info. That stinks for those of us who didn't order the August batch of the SP30 because the September batch is still 3-4 Months out. 3-4 months out for $5k is too tight for me. Yes, I did dream of having an SP30. |
|
|
|
|
murdof
|
|
June 09, 2014, 03:45:20 PM
Last edit: June 10, 2014, 04:01:52 AM by ckolivas |
|
Hey Zvi,
i had one of my SP10 units temporarily installed till we get the new air conditioner in the storage room.
Last night it stopped hashing so I checked on it this morning.
Suprisingly I found out that it took a dive off the shelf from about 1m height and landed between some pallets.
The damage is only cosmetic but I'm posting the pictures to tell me if you think I should open it and check something inside.
It seems to hash OK although the power on AC2DC doesn't go up to 1265. I had the same issue about 1 week ago and with a couple reboots it started to go up again. Currently it's hashing at 1.37Th/s - while it normally hashes at 1.42TH/s.
Note that it is plugged in with a lot of other devices so the power again might not be enough. This will be solved when the new air conditioner is installed and moved to its place. Let me know if you think something else is at fault.
Here is AC2DC value:
AC2DC power=1208[1265], temp=0, leading zeroes=39
We did not test this usage scenario, so it is hard for me to advise Please post your ASIC stats page and DCR page. Right now it is on a shelf with metal frame and i think it holds more heat (before it was on a base that didn't transfer heat - and apparently because of the vibrations it moved and the SP10 fell). Front: 32C - Back: 84C (I had 30C/79C). Hashing at (based on statistics from page): 1359.225 GH/s Fan speed: 80 Start V: 0.68 Max V: 0.72 Max Power Consumption: 1260 DC2DC Current Limit: 63 ASIC page: AC2DC power=1199[1260], temp=0, leading zeroes=39
L |Vtrm/max |vlt|Wt|Am|DCt|crt|Gh|Ov|ID |aTMP|Freq |Th|Bt|Engn|Wn |ID |aTMP|Freq |Th|Bt|Engn|Wn |ID |aTMP|Freq |Th|Bt|Engn|Wn |ID |aTMP|Freq |Th|Bt|Engn|Wn
0|ffed(ffed)|664|37|56| 97| 50|57| 0| 0: 77c 495hz( 0/ 0) 7fff359| 1: 77c 480hz( 0/ 0) 7fff364| 2: 77c 480hz( 0/ 0) 7fff412| 3: 77c 465hz( 0/ 0) 7fff321
| 4: 77c 480hz( 0/ 0) 7fff374| 5: 77c 495hz( 0/ 0) 7fff386| 6:113c 480hz( 0/ 0) 7fff355| 7: 77c 465hz( 0/ 0) 7fff358
1|ffef(ffef)|669|39|59| 87| 51|60| 0| 8:113c 525hz( 0/ 0) 7fff410| 9:113c 495hz( 0/ 0) 7fff361| 10: 77c 510hz( 0/ 0) 7fff406| 11: 77c 480hz( 0/ 0) 7fff336
| 12: 77c 480hz( 0/ 0) 7fff386| 13: 77c 495hz( 0/ 0) 7fff351| 14: 77c 510hz( 0/ 0) 7fff365| 15: 77c 525hz( 0/ 0) 7fff343
2|fff3(fff3)|680|39|58| 87| 30|59| 0| 16: 77c 465hz( 0/ 0) 7fff333| 17: 77c 480hz( 0/ 0) 7fff379| 18: 77c 510hz( 0/ 0) 7fff406| 19: 77c 465hz( 0/ 0) 7fff361
| 20: 77c 510hz( 0/ 0) 7fff377| 21: 77c 555hz( 0/ 0) 7fff417| 22: 77c 510hz( 0/ 0) 7fff387| 23: 77c 495hz( 0/ 0) 7fff382
3|fff1(fff1)|674|38|57| 91| 40|58| 0| 24: 77c 495hz( 0/ 0) 7fff411| 25: 77c 495hz( 0/ 0) 7fff346| 26: 77c 495hz( 0/ 0) 7fff375| 27: 77c 480hz( 0/ 0) 7fff405
| 28: 77c 495hz( 0/ 0) 7fff374| 29: 77c 465hz( 0/ 0) 7fff355| 30: 77c 510hz( 0/ 0) 7fff372| 31: 77c 495hz( 0/ 0) 7fff372
4|ffeb(ffeb)|658|37|56| 93| 80|56| 1| 32: 77c 480hz( 0/ 0) 7fff380| 33: 77c 480hz( 0/ 0) 7fff370| 34: 77c 465hz( 0/ 0) 7fff356| 35:113c 495hz( 0/ 0) 7fff368
| 36:113c 435hz( 0/ 0) 7fff309| 37:113c 450hz( 0/ 1) 7fff341| 38:113c 465hz( 0/ 0) 7fff362| 39:107c 465hz( 0/ 0) 7fff367
5|ffef(ffef)|669|37|56| 93| 50|58| 0| 40: 77c 480hz( 0/ 0) 7fff359| 41: 77c 495hz( 0/ 0) 7fff378| 42: 77c 480hz( 0/ 0) 7fff358| 43: 77c 495hz( 0/ 0) 7fff347
| 44: 77c 465hz( 0/ 0) 7fff355| 45: 77c 480hz( 0/ 0) 7fff372| 46:113c 510hz( 0/ 0) 7fff392| 47:113c 480hz( 0/ 0) 7fff336
6|ffee(ffee)|666|38|58| 87| 60|58| 0| 48: 77c 480hz( 0/ 0) 7fff383| 49: 77c 495hz( 0/ 0) 7fff356| 50:107c 510hz( 0/ 0) 7fff399| 51: 77c 450hz( 0/ 0) 7fff362
| 52:113c 510hz( 0/ 0) 7fff404| 53:113c 495hz( 0/ 0) 7fff369| 54:113c 480hz( 0/ 0) 7fff358| 55: 77c 465hz( 0/ 0) 7fff341
7|ffea(ffea)|656|36|56|101| 80|56| 0| 56: 77c 465hz( 0/ 0) 7fff349| 57: 77c 435hz( 0/ 0) 7fff317| 58: 77c 450hz( 0/ 0) 7fff346| 59: 77c 480hz( 0/ 0) 7fff351
| 60:113c 495hz( 0/ 0) 7fff416| 61:113c 495hz( 0/ 0) 7fff341| 62:113c 465hz( 0/ 0) 7fff341| 63:113c 480hz( 0/ 0) 7fff352
8|ffe6(ffef)|645|32|49| 99| 20|49| 3| 64:113c 465hz( 0/ 0) 7fff316| 65:113c 345hz( 0/ 9) 7fff275| 66:113c 375hz( 0/ 5) 7fff276| 67:113c 375hz( 0/ 5) 7fff260
| 68:113c 435hz( 0/ 0) 7fff339| 69:107c 450hz( 0/ 0) 7fff318| 70:107c 435hz( 0/ 0) 7fff313| 71:107c 435hz( 0/ 0) 7fff324
9|ffeb(ffeb)|658|34|52| 99| 40|52| 3| 72:107c 450hz( 0/ 0) 7fff312| 73:113c 495hz( 0/ 0) 7fff373| 74:107c 465hz( 0/ 0) 7fff331| 75:113c 480hz( 0/ 0) 7fff381
| 76:113c 420hz( 0/ 5) 7fff306| 77:113c 360hz( 0/ 9) 7fff277| 78:113c 345hz( 0/10) 7fff265| 79:113c 465hz( 0/ 0) 7fff365
10|ffea(ffea)|656|35|54| 96| 70|53| 3| 80:113c 450hz( 0/ 0) 7fff381| 81:113c 405hz( 0/ 4) 7fff295| 82:113c 390hz( 0/ 6) 7fff297| 83:113c 420hz( 0/ 4) 7fff294
| 84:113c 450hz( 0/ 0) 7fff371| 85: 77c 465hz( 0/ 0) 7fff345| 86:113c 480hz( 0/ 0) 7fff373| 87:113c 480hz( 0/ 0) 7fff367
11|ffef(ffef)|669|37|55| 98| 40|56| 3| 88: 77c 495hz( 0/ 0) 7fff376| 89: 77c 480hz( 0/ 0) 7fff366| 90: 77c 480hz( 0/ 0) 7fff358| 91:107c 480hz( 0/ 0) 7fff371
| 92:113c 465hz( 0/ 1) 7fff355| 93:113c 405hz( 0/ 5) 7fff303| 94:113c 420hz( 0/ 6) 7fff353| 95:113c 510hz( 0/ 0) 7fff392
12|fff8(fff8)|693|41|60| 97| 1|61| 2| 96:113c 585hz( 0/ 0) 7fff389| 97:113c 510hz( 0/ 0) 7fff409| 98: 77c 525hz( 0/ 0) 7fff397| 99: 77c 495hz( 0/ 0) 7fff380
|100:113c 525hz( 0/ 0) 7fff409|101:113c 525hz( 0/ 0) 7fff393|102:113c 450hz( 0/ 4) 7fff327|103:113c 495hz( 0/ 2) 7fff327
13|fff9( 2)|695|42|61| 94| 0|60| 3|104:113c 495hz( 0/ 4) 7fff365|105:113c 435hz( 0/ 8) 7fff309|106:113c 480hz( 0/ 0) 7fff352|107:113c 540hz( 0/ 0) 7fff419
|108:113c 540hz( 0/ 0) 7fff416|109: 77c 525hz( 0/ 0) 7fff391|110:113c 510hz( 0/ 4) 7fff407|111:113c 540hz( 0/ 0) 7fff404
14|fff8( 2)|693|40|58|100| 0|61| 3|112:113c 555hz( 0/ 1) 7fff353|113:113c 510hz( 0/ 0) 7fff400|114: 77c 495hz( 0/ 0) 7fff362|115:107c 510hz( 0/ 0) 7fff370
|116:113c 510hz( 0/ 0) 7fff395|117:113c 525hz( 0/ 1) 7fff419|118:113c 465hz( 0/ 3) 7fff354|119:113c 510hz( 0/ 0) 7fff373
15|fff7(fff7)|690|41|60| 90| 2|61| 1|120:113c 525hz( 0/ 0) 7fff389|121:113c 495hz( 0/ 3) 7fff378|122:113c 510hz( 0/ 0) 7fff365|123:107c 510hz( 0/ 0) 7fff392
|124: 77c 495hz( 0/ 0) 7fff357|125: 77c 540hz( 0/ 0) 7fff399|126: 77c 510hz( 0/ 0) 7fff369|127: 77c 525hz( 0/ 0) 7fff383
16|ffef( 2)|669|37|55| 90| 0|54| 3|128: 77c 480hz( 0/ 0) 7fff366|129:113c 480hz( 0/ 0) 7fff367|130:113c 480hz( 0/ 0) 7fff310|131:113c 465hz( 0/ 0) 7fff350
|132:113c 420hz( 0/ 7) 7fff322|133:113c 420hz( 0/ 5) 7fff303|134:113c 405hz( 0/ 5) 7fff331|135:113c 465hz( 0/ 0) 7fff327
17|fff9( 2)|695|40|57|103| 0|60| 3|136:113c 510hz( 0/ 0) 7fff343|137:113c 495hz( 0/ 0) 7fff370|138:113c 555hz( 0/ 0) 7fff412|139:113c 510hz( 0/ 0) 7fff390
|140:113c 495hz( 0/ 0) 7fff358|141:113c 525hz( 0/ 1) 7fff353|142:113c 450hz( 0/ 4) 7fff338|143:113c 465hz( 0/ 5) 7fff327
18|fff1(fff1)|674|41|61| 87| 2|59| 0|144: 77c 465hz( 0/ 0) 7fff360|145:113c 510hz( 0/ 0) 7fff400|146:113c 525hz( 0/ 0) 7fff370|147:113c 480hz( 0/ 0) 7fff342
|148:113c 525hz( 0/ 0) 7fff400|149:113c 480hz( 0/ 0) 7fff380|150:113c 480hz( 0/ 0) 7fff380|151:113c 495hz( 0/ 0) 7fff388
19|fff7( 2)|690|39|57|105| 0|58| 3|152:113c 510hz( 0/ 0) 7fff378|153:113c 510hz( 0/ 0) 7fff379|154:113c 495hz( 0/ 0) 7fff394|155:113c 495hz( 0/ 2) 7fff341
|156:113c 465hz( 0/ 4) 7fff346|157:113c 510hz( 0/ 0) 7fff345|158:113c 420hz( 0/ 4) 7fff315|159:113c 480hz( 0/ 0) 7fff336
20|ffe4( 2)|640|31|48| 93| 0|50| 3|160:107c 435hz( 0/ 0) 7fff356|161:113c 420hz( 0/ 1) 7fff337|162:113c 390hz( 0/ 4) 7fff270|163:113c 405hz( 0/ 3) 7fff318
|164:113c 450hz( 0/ 0) 7fff366|165:107c 405hz( 0/ 0) 7fff314|166:113c 420hz( 0/ 0) 7fff315|167:107c 420hz( 0/ 0) 7fff327
21|ffe6( 2)|645|30|47| 90| 0|49| 3|168:107c 450hz( 0/ 0) 7fff334|169:113c 420hz( 0/ 0) 7fff323|170:113c 435hz( 0/ 0) 7fff348|171:113c 435hz( 0/ 1) 7fff318
|172:113c 420hz( 0/ 0) 7fff326|173:113c 375hz( 0/ 5) 7fff306|174:113c 375hz( 0/ 6) 7fff285|175:107c 420hz( 0/ 0) 7fff301
22|ffe8( 2)|650|33|50| 88| 0|51| 3|176:113c 450hz( 0/ 0) 7fff343|177:113c 420hz( 0/ 3) 7fff293|178:113c 405hz( 0/ 3) 7fff335|179:113c 390hz( 0/ 6) 7fff312
|180:113c 450hz( 0/ 0) 7fff341|181:113c 450hz( 0/ 0) 7fff328|182:113c 435hz( 0/ 0) 7fff332|183:107c 450hz( 0/ 0) 7fff336
23|ffed( 2)|664|34|52| 94| 0|53| 3|184: 77c 465hz( 0/ 0) 7fff328|185:107c 465hz( 0/ 0) 7fff339|186: 77c 480hz( 0/ 0) 7fff362|187:113c 465hz( 0/ 0) 7fff353
|188:113c 405hz( 0/ 5) 7fff308|189:113c 375hz( 0/ 7) 7fff278|190:113c 405hz( 0/ 4) 7fff304|191:113c 480hz( 0/ 0) 7fff358
[H:HW:1359Gh/Th:1359Gh/W:1359Gh,W:899,L:24,A:192,ER:1359,EP:1030,MMtmp:32]
Pushed 546 jobs , in queue 75 jobs!
wins:68069[fp:0], leading-zeroes:39 idle:0/0 :)
Adapter queues: rsp=50, req=278
[/pre]
DCR Page:
[pre]
DC2DC DCR inductor flag loop 0 (0xD0) = 2
DC2DC DCR inductor flag loop 1 (0xD0) = 2
DC2DC DCR inductor flag loop 2 (0xD0) = 2
DC2DC DCR inductor flag loop 3 (0xD0) = 2
DC2DC DCR inductor flag loop 4 (0xD0) = 2
DC2DC DCR inductor flag loop 5 (0xD0) = 2
DC2DC DCR inductor flag loop 6 (0xD0) = 2
DC2DC DCR inductor flag loop 7 (0xD0) = 2
DC2DC DCR inductor flag loop 8 (0xD0) = 2
DC2DC DCR inductor flag loop 9 (0xD0) = 2
DC2DC DCR inductor flag loop 10 (0xD0) = 2
DC2DC DCR inductor flag loop 11 (0xD0) = 2
DC2DC DCR inductor flag loop 12 (0xD0) = 0
DC2DC DCR inductor flag loop 13 (0xD0) = 0
DC2DC DCR inductor flag loop 14 (0xD0) = 0
DC2DC DCR inductor flag loop 15 (0xD0) = 0
DC2DC DCR inductor flag loop 16 (0xD0) = 0
DC2DC DCR inductor flag loop 17 (0xD0) = 0
DC2DC DCR inductor flag loop 18 (0xD0) = 0
DC2DC DCR inductor flag loop 19 (0xD0) = 0
DC2DC DCR inductor flag loop 20 (0xD0) = 0
DC2DC DCR inductor flag loop 21 (0xD0) = 0
DC2DC DCR inductor flag loop 22 (0xD0) = 0
DC2DC DCR inductor flag loop 23 (0xD0) = 0
Do you think all looks good and when the temp drops and move it to better plug will be OK? From pictures I don't think there is anything in the front that can be affected. Maybe I start a youtube channel and do drop tests  Maybe advertsing profit from the video is more than bitcoin mining with current difficulty. People do it all the time with mobile phones |
|
|
|
opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
|
June 09, 2014, 03:48:18 PM |
|
Question.
If I'm not in advanced mode does the three fan settings control the other numbers that are in advanced mode?
I just took a peek at the numbers in advanced mode (these I never changed) and they are:
FAN SPEED: 80
START VOLTAGE: .664
MAZ VOLTAGE: .750
MAX POWER CONSUMP: 1260
DC2DC CURRENT LIMIT: 62
Are all those numbers ok? Right now I'm on a 110V but will be switched over to a 208V next week probably.
|
|
|
|
|
zvisha
|
|
June 09, 2014, 04:09:35 PM
Last edit: June 10, 2014, 04:03:03 AM by ckolivas |
|
Hey Zvi,
i had one of my SP10 units temporarily installed till we get the new air conditioner in the storage room.
Last night it stopped hashing so I checked on it this morning.
Suprisingly I found out that it took a dive off the shelf from about 1m height and landed between some pallets.
The damage is only cosmetic but I'm posting the pictures to tell me if you think I should open it and check something inside.
It seems to hash OK although the power on AC2DC doesn't go up to 1265. I had the same issue about 1 week ago and with a couple reboots it started to go up again. Currently it's hashing at 1.37Th/s - while it normally hashes at 1.42TH/s.
Note that it is plugged in with a lot of other devices so the power again might not be enough. This will be solved when the new air conditioner is installed and moved to its place. Let me know if you think something else is at fault.
Here is AC2DC value:
AC2DC power=1208[1265], temp=0, leading zeroes=39
We did not test this usage scenario, so it is hard for me to advise Please post your ASIC stats page and DCR page. Right now it is on a shelf with metal frame and i think it holds more heat (before it was on a base that didn't transfer heat - and apparently because of the vibrations it moved and the SP10 fell). Front: 32C - Back: 84C (I had 30C/79C). Hashing at (based on statistics from page): 1359.225 GH/s Fan speed: 80 Start V: 0.68 Max V: 0.72 Max Power Consumption: 1260 DC2DC Current Limit: 63 ASIC page: AC2DC power=1199[1260], temp=0, leading zeroes=39
L |Vtrm/max |vlt|Wt|Am|DCt|crt|Gh|Ov|ID |aTMP|Freq |Th|Bt|Engn|Wn |ID |aTMP|Freq |Th|Bt|Engn|Wn |ID |aTMP|Freq |Th|Bt|Engn|Wn |ID |aTMP|Freq |Th|Bt|Engn|Wn
0|ffed(ffed)|664|37|56| 97| 50|57| 0| 0: 77c 495hz( 0/ 0) 7fff359| 1: 77c 480hz( 0/ 0) 7fff364| 2: 77c 480hz( 0/ 0) 7fff412| 3: 77c 465hz( 0/ 0) 7fff321
| 4: 77c 480hz( 0/ 0) 7fff374| 5: 77c 495hz( 0/ 0) 7fff386| 6:113c 480hz( 0/ 0) 7fff355| 7: 77c 465hz( 0/ 0) 7fff358
1|ffef(ffef)|669|39|59| 87| 51|60| 0| 8:113c 525hz( 0/ 0) 7fff410| 9:113c 495hz( 0/ 0) 7fff361| 10: 77c 510hz( 0/ 0) 7fff406| 11: 77c 480hz( 0/ 0) 7fff336
| 12: 77c 480hz( 0/ 0) 7fff386| 13: 77c 495hz( 0/ 0) 7fff351| 14: 77c 510hz( 0/ 0) 7fff365| 15: 77c 525hz( 0/ 0) 7fff343
2|fff3(fff3)|680|39|58| 87| 30|59| 0| 16: 77c 465hz( 0/ 0) 7fff333| 17: 77c 480hz( 0/ 0) 7fff379| 18: 77c 510hz( 0/ 0) 7fff406| 19: 77c 465hz( 0/ 0) 7fff361
| 20: 77c 510hz( 0/ 0) 7fff377| 21: 77c 555hz( 0/ 0) 7fff417| 22: 77c 510hz( 0/ 0) 7fff387| 23: 77c 495hz( 0/ 0) 7fff382
3|fff1(fff1)|674|38|57| 91| 40|58| 0| 24: 77c 495hz( 0/ 0) 7fff411| 25: 77c 495hz( 0/ 0) 7fff346| 26: 77c 495hz( 0/ 0) 7fff375| 27: 77c 480hz( 0/ 0) 7fff405
| 28: 77c 495hz( 0/ 0) 7fff374| 29: 77c 465hz( 0/ 0) 7fff355| 30: 77c 510hz( 0/ 0) 7fff372| 31: 77c 495hz( 0/ 0) 7fff372
4|ffeb(ffeb)|658|37|56| 93| 80|56| 1| 32: 77c 480hz( 0/ 0) 7fff380| 33: 77c 480hz( 0/ 0) 7fff370| 34: 77c 465hz( 0/ 0) 7fff356| 35:113c 495hz( 0/ 0) 7fff368
| 36:113c 435hz( 0/ 0) 7fff309| 37:113c 450hz( 0/ 1) 7fff341| 38:113c 465hz( 0/ 0) 7fff362| 39:107c 465hz( 0/ 0) 7fff367
5|ffef(ffef)|669|37|56| 93| 50|58| 0| 40: 77c 480hz( 0/ 0) 7fff359| 41: 77c 495hz( 0/ 0) 7fff378| 42: 77c 480hz( 0/ 0) 7fff358| 43: 77c 495hz( 0/ 0) 7fff347
| 44: 77c 465hz( 0/ 0) 7fff355| 45: 77c 480hz( 0/ 0) 7fff372| 46:113c 510hz( 0/ 0) 7fff392| 47:113c 480hz( 0/ 0) 7fff336
6|ffee(ffee)|666|38|58| 87| 60|58| 0| 48: 77c 480hz( 0/ 0) 7fff383| 49: 77c 495hz( 0/ 0) 7fff356| 50:107c 510hz( 0/ 0) 7fff399| 51: 77c 450hz( 0/ 0) 7fff362
| 52:113c 510hz( 0/ 0) 7fff404| 53:113c 495hz( 0/ 0) 7fff369| 54:113c 480hz( 0/ 0) 7fff358| 55: 77c 465hz( 0/ 0) 7fff341
7|ffea(ffea)|656|36|56|101| 80|56| 0| 56: 77c 465hz( 0/ 0) 7fff349| 57: 77c 435hz( 0/ 0) 7fff317| 58: 77c 450hz( 0/ 0) 7fff346| 59: 77c 480hz( 0/ 0) 7fff351
| 60:113c 495hz( 0/ 0) 7fff416| 61:113c 495hz( 0/ 0) 7fff341| 62:113c 465hz( 0/ 0) 7fff341| 63:113c 480hz( 0/ 0) 7fff352
8|ffe6(ffef)|645|32|49| 99| 20|49| 3| 64:113c 465hz( 0/ 0) 7fff316| 65:113c 345hz( 0/ 9) 7fff275| 66:113c 375hz( 0/ 5) 7fff276| 67:113c 375hz( 0/ 5) 7fff260
| 68:113c 435hz( 0/ 0) 7fff339| 69:107c 450hz( 0/ 0) 7fff318| 70:107c 435hz( 0/ 0) 7fff313| 71:107c 435hz( 0/ 0) 7fff324
9|ffeb(ffeb)|658|34|52| 99| 40|52| 3| 72:107c 450hz( 0/ 0) 7fff312| 73:113c 495hz( 0/ 0) 7fff373| 74:107c 465hz( 0/ 0) 7fff331| 75:113c 480hz( 0/ 0) 7fff381
| 76:113c 420hz( 0/ 5) 7fff306| 77:113c 360hz( 0/ 9) 7fff277| 78:113c 345hz( 0/10) 7fff265| 79:113c 465hz( 0/ 0) 7fff365
10|ffea(ffea)|656|35|54| 96| 70|53| 3| 80:113c 450hz( 0/ 0) 7fff381| 81:113c 405hz( 0/ 4) 7fff295| 82:113c 390hz( 0/ 6) 7fff297| 83:113c 420hz( 0/ 4) 7fff294
| 84:113c 450hz( 0/ 0) 7fff371| 85: 77c 465hz( 0/ 0) 7fff345| 86:113c 480hz( 0/ 0) 7fff373| 87:113c 480hz( 0/ 0) 7fff367
11|ffef(ffef)|669|37|55| 98| 40|56| 3| 88: 77c 495hz( 0/ 0) 7fff376| 89: 77c 480hz( 0/ 0) 7fff366| 90: 77c 480hz( 0/ 0) 7fff358| 91:107c 480hz( 0/ 0) 7fff371
| 92:113c 465hz( 0/ 1) 7fff355| 93:113c 405hz( 0/ 5) 7fff303| 94:113c 420hz( 0/ 6) 7fff353| 95:113c 510hz( 0/ 0) 7fff392
12|fff8(fff8)|693|41|60| 97| 1|61| 2| 96:113c 585hz( 0/ 0) 7fff389| 97:113c 510hz( 0/ 0) 7fff409| 98: 77c 525hz( 0/ 0) 7fff397| 99: 77c 495hz( 0/ 0) 7fff380
|100:113c 525hz( 0/ 0) 7fff409|101:113c 525hz( 0/ 0) 7fff393|102:113c 450hz( 0/ 4) 7fff327|103:113c 495hz( 0/ 2) 7fff327
13|fff9( 2)|695|42|61| 94| 0|60| 3|104:113c 495hz( 0/ 4) 7fff365|105:113c 435hz( 0/ 8) 7fff309|106:113c 480hz( 0/ 0) 7fff352|107:113c 540hz( 0/ 0) 7fff419
|108:113c 540hz( 0/ 0) 7fff416|109: 77c 525hz( 0/ 0) 7fff391|110:113c 510hz( 0/ 4) 7fff407|111:113c 540hz( 0/ 0) 7fff404
14|fff8( 2)|693|40|58|100| 0|61| 3|112:113c 555hz( 0/ 1) 7fff353|113:113c 510hz( 0/ 0) 7fff400|114: 77c 495hz( 0/ 0) 7fff362|115:107c 510hz( 0/ 0) 7fff370
|116:113c 510hz( 0/ 0) 7fff395|117:113c 525hz( 0/ 1) 7fff419|118:113c 465hz( 0/ 3) 7fff354|119:113c 510hz( 0/ 0) 7fff373
15|fff7(fff7)|690|41|60| 90| 2|61| 1|120:113c 525hz( 0/ 0) 7fff389|121:113c 495hz( 0/ 3) 7fff378|122:113c 510hz( 0/ 0) 7fff365|123:107c 510hz( 0/ 0) 7fff392
|124: 77c 495hz( 0/ 0) 7fff357|125: 77c 540hz( 0/ 0) 7fff399|126: 77c 510hz( 0/ 0) 7fff369|127: 77c 525hz( 0/ 0) 7fff383
16|ffef( 2)|669|37|55| 90| 0|54| 3|128: 77c 480hz( 0/ 0) 7fff366|129:113c 480hz( 0/ 0) 7fff367|130:113c 480hz( 0/ 0) 7fff310|131:113c 465hz( 0/ 0) 7fff350
|132:113c 420hz( 0/ 7) 7fff322|133:113c 420hz( 0/ 5) 7fff303|134:113c 405hz( 0/ 5) 7fff331|135:113c 465hz( 0/ 0) 7fff327
17|fff9( 2)|695|40|57|103| 0|60| 3|136:113c 510hz( 0/ 0) 7fff343|137:113c 495hz( 0/ 0) 7fff370|138:113c 555hz( 0/ 0) 7fff412|139:113c 510hz( 0/ 0) 7fff390
|140:113c 495hz( 0/ 0) 7fff358|141:113c 525hz( 0/ 1) 7fff353|142:113c 450hz( 0/ 4) 7fff338|143:113c 465hz( 0/ 5) 7fff327
18|fff1(fff1)|674|41|61| 87| 2|59| 0|144: 77c 465hz( 0/ 0) 7fff360|145:113c 510hz( 0/ 0) 7fff400|146:113c 525hz( 0/ 0) 7fff370|147:113c 480hz( 0/ 0) 7fff342
|148:113c 525hz( 0/ 0) 7fff400|149:113c 480hz( 0/ 0) 7fff380|150:113c 480hz( 0/ 0) 7fff380|151:113c 495hz( 0/ 0) 7fff388
19|fff7( 2)|690|39|57|105| 0|58| 3|152:113c 510hz( 0/ 0) 7fff378|153:113c 510hz( 0/ 0) 7fff379|154:113c 495hz( 0/ 0) 7fff394|155:113c 495hz( 0/ 2) 7fff341
|156:113c 465hz( 0/ 4) 7fff346|157:113c 510hz( 0/ 0) 7fff345|158:113c 420hz( 0/ 4) 7fff315|159:113c 480hz( 0/ 0) 7fff336
20|ffe4( 2)|640|31|48| 93| 0|50| 3|160:107c 435hz( 0/ 0) 7fff356|161:113c 420hz( 0/ 1) 7fff337|162:113c 390hz( 0/ 4) 7fff270|163:113c 405hz( 0/ 3) 7fff318
|164:113c 450hz( 0/ 0) 7fff366|165:107c 405hz( 0/ 0) 7fff314|166:113c 420hz( 0/ 0) 7fff315|167:107c 420hz( 0/ 0) 7fff327
21|ffe6( 2)|645|30|47| 90| 0|49| 3|168:107c 450hz( 0/ 0) 7fff334|169:113c 420hz( 0/ 0) 7fff323|170:113c 435hz( 0/ 0) 7fff348|171:113c 435hz( 0/ 1) 7fff318
|172:113c 420hz( 0/ 0) 7fff326|173:113c 375hz( 0/ 5) 7fff306|174:113c 375hz( 0/ 6) 7fff285|175:107c 420hz( 0/ 0) 7fff301
22|ffe8( 2)|650|33|50| 88| 0|51| 3|176:113c 450hz( 0/ 0) 7fff343|177:113c 420hz( 0/ 3) 7fff293|178:113c 405hz( 0/ 3) 7fff335|179:113c 390hz( 0/ 6) 7fff312
|180:113c 450hz( 0/ 0) 7fff341|181:113c 450hz( 0/ 0) 7fff328|182:113c 435hz( 0/ 0) 7fff332|183:107c 450hz( 0/ 0) 7fff336
23|ffed( 2)|664|34|52| 94| 0|53| 3|184: 77c 465hz( 0/ 0) 7fff328|185:107c 465hz( 0/ 0) 7fff339|186: 77c 480hz( 0/ 0) 7fff362|187:113c 465hz( 0/ 0) 7fff353
|188:113c 405hz( 0/ 5) 7fff308|189:113c 375hz( 0/ 7) 7fff278|190:113c 405hz( 0/ 4) 7fff304|191:113c 480hz( 0/ 0) 7fff358
[H:HW:1359Gh/Th:1359Gh/W:1359Gh,W:899,L:24,A:192,ER:1359,EP:1030,MMtmp:32]
Pushed 546 jobs , in queue 75 jobs!
wins:68069[fp:0], leading-zeroes:39 idle:0/0 :)
Adapter queues: rsp=50, req=278
DCR Page: DC2DC DCR inductor flag loop 0 (0xD0) = 2
DC2DC DCR inductor flag loop 1 (0xD0) = 2
DC2DC DCR inductor flag loop 2 (0xD0) = 2
DC2DC DCR inductor flag loop 3 (0xD0) = 2
DC2DC DCR inductor flag loop 4 (0xD0) = 2
DC2DC DCR inductor flag loop 5 (0xD0) = 2
DC2DC DCR inductor flag loop 6 (0xD0) = 2
DC2DC DCR inductor flag loop 7 (0xD0) = 2
DC2DC DCR inductor flag loop 8 (0xD0) = 2
DC2DC DCR inductor flag loop 9 (0xD0) = 2
DC2DC DCR inductor flag loop 10 (0xD0) = 2
DC2DC DCR inductor flag loop 11 (0xD0) = 2
DC2DC DCR inductor flag loop 12 (0xD0) = 0
DC2DC DCR inductor flag loop 13 (0xD0) = 0
DC2DC DCR inductor flag loop 14 (0xD0) = 0
DC2DC DCR inductor flag loop 15 (0xD0) = 0
DC2DC DCR inductor flag loop 16 (0xD0) = 0
DC2DC DCR inductor flag loop 17 (0xD0) = 0
DC2DC DCR inductor flag loop 18 (0xD0) = 0
DC2DC DCR inductor flag loop 19 (0xD0) = 0
DC2DC DCR inductor flag loop 20 (0xD0) = 0
DC2DC DCR inductor flag loop 21 (0xD0) = 0
DC2DC DCR inductor flag loop 22 (0xD0) = 0
DC2DC DCR inductor flag loop 23 (0xD0) = 0
Do you think all looks good and when the temp drops and move it to better plug will be OK? From pictures I don't think there is anything in the front that can be affected. Maybe I start a youtube channel and do drop tests Maybe advertsing profit from the video is more than bitcoin mining with current difficulty. People do it all the time with mobile phones It's all looks good, just your ambient temperature is a bit too hot. |
|
|
|
|
|
zvisha
|
|
June 09, 2014, 04:10:35 PM |
|
Question.
If I'm not in advanced mode does the three fan settings control the other numbers that are in advanced mode?
I just took a peek at the numbers in advanced mode (these I never changed) and they are:
FAN SPEED: 80
START VOLTAGE: .664
MAZ VOLTAGE: .750
MAX POWER CONSUMP: 1260
DC2DC CURRENT LIMIT: 62
Are all those numbers ok? Right now I'm on a 110V but will be switched over to a 208V next week probably.
For 110V set your START VOLTAGE to 0.650. |
|
|
|
|
|
nhminer
|
|
June 09, 2014, 04:38:01 PM |
|
All 110V users
Hello to all our new world clients.
It looks like for the 110V the optimal starting voltage is 0.650V or even 0.645V.
Please update your settings and you might get better hashing rate (wait for 30 minutes after reset to see where miner settles).
Will the SP30 have dual 120/240V circuits for US miners? |
BCH - 1EshwUEg9LRbY5WMSw7bkBGQUYQeenkcet
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
June 09, 2014, 05:20:05 PM |
|
Spondoolies-will you have new Sp-10 soon or not? It abruptly disappeared to out of stock. It takes time to make hosting arrangement and then-poof, it's gone.
Disappointed.
The SP10 is out of stock. If there will be non paying, we might have some stock available. Monitor the web site. We won't produce more SP10s after June. |
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
June 09, 2014, 05:22:08 PM |
|
Will the SP30 have dual 120/240V circuits for US miners?
Yes. You can see the 2 PSUs in the picture below.  |
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
June 09, 2014, 05:46:41 PM |
|
Each time I see a pic of this I want one even more. LOL Impressive. Will the SP30 have dual 120/240V circuits for US miners?
Yes. You can see the 2 PSUs in the picture below. |
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
June 09, 2014, 05:52:39 PM |
|
SP30 dimensions:
554 X 431 X 88.4 [mm]
SP10 dimensions:
473 X 431 X 55.1 [mm]
Thank Specs on the 80mm fans? They look like 80x80x38mm ?
I have two Delta fans in a 4u case and they are loud. These will likely be plenty loud but avoid the higher pitch "whine" of the SP10s?
Early measurements shows that from 1m distance the SP30 noise level will be ~68dB (PSU side, fans at 80%, power supplies at max load). We'll have exact figures only when the ASICs will arrive. Under same conditions, the SP10 noise level is ~74dB The fans specs: https://www.dropbox.com/s/xf4j86aceagk50t/FD128038HB-S%282W7YM%29%2BC-ROHS.PDF80mm fans at 7000 rpm are definitely an improvement, and every 200 rpm you can shave off that will make a significant difference. |
|
|
|
ElectricSavant
Newbie
Offline
Activity: 32
Merit: 0
|
|
June 09, 2014, 05:57:21 PM |
|
This is not only the biggest in the world, but she she is the most beautiful.....such grace...look at those smooth lines....she is a slab of speeeeeed.
ok I lost it.
ElectricSavant™
|
|
|
|
|
|
murdof
|
|
June 09, 2014, 06:15:25 PM |
|
It's all looks good, just your ambient temperature is a bit too hot.
Thanks Zvi. Will fix that in the morning, and hopefully within the week I will have the new air conditioner installed so I will be able to throw in 24C. SP10-DropTest1m = 1-0 |
|
|
|
|
wpgdeez
|
|
June 09, 2014, 07:00:02 PM
Last edit: June 10, 2014, 04:04:11 AM by ckolivas |
|
Hey Zvi,
i had one of my SP10 units temporarily installed till we get the new air conditioner in the storage room.
Last night it stopped hashing so I checked on it this morning.
Suprisingly I found out that it took a dive off the shelf from about 1m height and landed between some pallets.
The damage is only cosmetic but I'm posting the pictures to tell me if you think I should open it and check something inside.
It seems to hash OK although the power on AC2DC doesn't go up to 1265. I had the same issue about 1 week ago and with a couple reboots it started to go up again. Currently it's hashing at 1.37Th/s - while it normally hashes at 1.42TH/s.
Note that it is plugged in with a lot of other devices so the power again might not be enough. This will be solved when the new air conditioner is installed and moved to its place. Let me know if you think something else is at fault.
Here is AC2DC value:
AC2DC power=1208[1265], temp=0, leading zeroes=39
We did not test this usage scenario, so it is hard for me to advise Please post your ASIC stats page and DCR page. Right now it is on a shelf with metal frame and i think it holds more heat (before it was on a base that didn't transfer heat - and apparently because of the vibrations it moved and the SP10 fell). Front: 32C - Back: 84C (I had 30C/79C). Hashing at (based on statistics from page): 1359.225 GH/s Fan speed: 80 Start V: 0.68 Max V: 0.72 Max Power Consumption: 1260 DC2DC Current Limit: 63 Do you think all looks good and when the temp drops and move it to better plug will be OK? From pictures I don't think there is anything in the front that can be affected. Maybe I start a youtube channel and do drop tests Maybe advertsing profit from the video is more than bitcoin mining with current difficulty. People do it all the time with mobile phones It's all looks good, just your ambient temperature is a bit too hot. What does the inductor loop flag mean when set to 2? All of mine say 0. |
|
|
|
|
|
zvisha
|
|
June 09, 2014, 08:43:13 PM
Last edit: June 10, 2014, 04:03:47 AM by ckolivas |
|
Hey Zvi,
i had one of my SP10 units temporarily installed till we get the new air conditioner in the storage room.
Last night it stopped hashing so I checked on it this morning.
Suprisingly I found out that it took a dive off the shelf from about 1m height and landed between some pallets.
The damage is only cosmetic but I'm posting the pictures to tell me if you think I should open it and check something inside.
It seems to hash OK although the power on AC2DC doesn't go up to 1265. I had the same issue about 1 week ago and with a couple reboots it started to go up again. Currently it's hashing at 1.37Th/s - while it normally hashes at 1.42TH/s.
Note that it is plugged in with a lot of other devices so the power again might not be enough. This will be solved when the new air conditioner is installed and moved to its place. Let me know if you think something else is at fault.
Here is AC2DC value:
AC2DC power=1208[1265], temp=0, leading zeroes=39
We did not test this usage scenario, so it is hard for me to advise Please post your ASIC stats page and DCR page. Right now it is on a shelf with metal frame and i think it holds more heat (before it was on a base that didn't transfer heat - and apparently because of the vibrations it moved and the SP10 fell). Front: 32C - Back: 84C (I had 30C/79C). Hashing at (based on statistics from page): 1359.225 GH/s Fan speed: 80 Start V: 0.68 Max V: 0.72 Max Power Consumption: 1260 DC2DC Current Limit: 63 Do you think all looks good and when the temp drops and move it to better plug will be OK? From pictures I don't think there is anything in the front that can be affected. Maybe I start a youtube channel and do drop tests Maybe advertsing profit from the video is more than bitcoin mining with current difficulty. People do it all the time with mobile phones It's all looks good, just your ambient temperature is a bit too hot. What does the inductor loop flag mean when set to 2? All of mine say 0. Different inductor type. It can be 0, 1 or 2. |
|
|
|
|
|
