Giraudy
|
|
February 21, 2017, 06:51:02 AM |
|
not sure about that...i was tried to add pascalcoin earlier and it was named WTM-PASC and doesn't work.i copied yours WTM-Pascalcoin and it was working...are you sure you are not hardcoded WTM names?
Hardcoded only "WTM". Ending can be any. Since this software is being actively improved, is time to start a new thread something like "Miner Control - Giraudy mod". Giraudy deserves the recognition for the good work.
Mod is not completed yet. Still have a lot of ideas to implement.
|
|
|
|
duboisi
|
|
February 21, 2017, 07:22:11 AM |
|
Is always good to be able to download the latest release from the first post of a thread, especially if enhancements are being release regularly.
|
|
|
|
lyolyalya
|
|
February 21, 2017, 07:49:08 AM |
|
not sure about that...i was tried to add pascalcoin earlier and it was named WTM-PASC and doesn't work.i copied yours WTM-Pascalcoin and it was working...are you sure you are not hardcoded WTM names?
Hardcoded only "WTM". Ending can be any. that's strange.i'm sure that i was changing WTM-Pasc to WTM-Pascalcoin and only then it was working.okay...let's see. and what about hiding WTM-coins in pools section if i don't use WTM-Pascalcoin for a while?
|
|
|
|
Giraudy
|
|
February 21, 2017, 08:47:11 AM |
|
not sure about that...i was tried to add pascalcoin earlier and it was named WTM-PASC and doesn't work.i copied yours WTM-Pascalcoin and it was working...are you sure you are not hardcoded WTM names?
Hardcoded only "WTM". Ending can be any. that's strange.i'm sure that i was changing WTM-Pasc to WTM-Pascalcoin and only then it was working.okay...let's see. and what about hiding WTM-coins in pools section if i don't use WTM-Pascalcoin for a while? You should add "active" key not in pool, but in algos section. Can you check, if it is working },"WTM-Pascalcoin": {"account": "","worker": "", "pricemode": 0, "cweight": 1.0, "fee":1,"sparam1": "","sparam2": "", "algos": [{ "active":false, "cname": "pascalcoin", "tag": "pasc", "algo": "pascal", "folder": "_APARAM1_", "command": "_APARAM2_", "arguments": "_APARAM3_ _SPARAM1_ -u _ACCOUNT_._WORKER_ _SPARAM2_" }]
|
|
|
|
lyolyalya
|
|
February 21, 2017, 04:58:49 PM Last edit: February 21, 2017, 05:11:33 PM by lyolyalya |
|
not sure about that...i was tried to add pascalcoin earlier and it was named WTM-PASC and doesn't work.i copied yours WTM-Pascalcoin and it was working...are you sure you are not hardcoded WTM names?
Hardcoded only "WTM". Ending can be any. that's strange.i'm sure that i was changing WTM-Pasc to WTM-Pascalcoin and only then it was working.okay...let's see. and what about hiding WTM-coins in pools section if i don't use WTM-Pascalcoin for a while? You should add "active" key not in pool, but in algos section. Can you check, if it is working },"WTM-Pascalcoin": {"account": "","worker": "", "pricemode": 0, "cweight": 1.0, "fee":1,"sparam1": "","sparam2": "", "algos": [{ "active":false, "cname": "pascalcoin", "tag": "pasc", "algo": "pascal", "folder": "_APARAM1_", "command": "_APARAM2_", "arguments": "_APARAM3_ _SPARAM1_ -u _ACCOUNT_._WORKER_ _SPARAM2_" }] yes.i did that and coins are disapearing.BUT - in pools...
|
|
|
|
|
lyolyalya
|
|
February 23, 2017, 12:02:45 PM |
|
can you add a function to add any pools manually without hardcoding them?
|
|
|
|
lyolyalya
|
|
February 23, 2017, 01:02:48 PM |
|
aaand if i need to insert some pause before switching to lbry - how can i do that? i know about "timeout" for bat files, but it won't work in miner control.can you implement this option in miner control?"delay" - is not an option, cause it inserts pause to all switches.
|
|
|
|
Zimmsquad
Member
Offline
Activity: 108
Merit: 10
|
|
February 24, 2017, 05:48:58 PM |
|
Can someone further explain using the WTM code at the bottom of the config file? When I am using those, am I not mining in a pool? Also, do I just have to put in my corresponding wallet address between the "" near account and the worker name between the "" near worker? Are there any advantages/disadvantages to using the WTM coin profiles opposed to some of the other pools?
|
|
|
|
Giraudy
|
|
February 24, 2017, 07:41:19 PM |
|
can you add a function to add any pools manually without hardcoding them?
Can someone further explain using the WTM code at the bottom of the config file? When I am using those, am I not mining in a pool? Also, do I just have to put in my corresponding wallet address between the "" near account and the worker name between the "" near worker? Are there any advantages/disadvantages to using the WTM coin profiles opposed to some of the other pools?
The thing is, that each pool has unique syntax for APIs. Requests for getting balance and speed from pool should be coded within the application to work correctly. WTM is therefore a universal tool, that can be attached to any pool, that supports some coin listed on WTM. It doesn't send requests for balance and speed data, it has only prices. With WTM you will mine the pool you've entered in "arguments" section. There were samples for its above. Other simplest possibility, if you have, for example, any bat file for pool&miner, to copy parameters from there to "arguments" section.
|
|
|
|
Giraudy
|
|
February 24, 2017, 07:56:12 PM |
|
Package updated. Beta4 now. https://mega.nz/#F!rhAFCbIa!F4XoHfIYoPYgJ-V1TUyP2A- Claymore Dual ETH miner v.8.0 - Dual-mining supported. - Sample configs for dual-mining included. “DualMining” price calculations for Claymore miner. - Profitability is taken from WhatToMine. - All dual coins are supported. - "Pricemode” selection: (0) current prices; (1) average 24h prices. - accounts or direct wallets can be added to string parameters directly ("arguments" section). - No balance and speed reported. If you need it, add strings for designated pools with mono coins.
|
|
|
|
Giraudy
|
|
February 24, 2017, 07:58:26 PM Last edit: February 24, 2017, 08:32:55 PM by Giraudy |
|
A question from my side about -dcri parameter. If someone mines dual, which intensity are you using for each coin pair and videocard?
|
|
|
|
lyolyalya
|
|
February 25, 2017, 05:08:20 AM Last edit: February 25, 2017, 01:39:05 PM by lyolyalya |
|
A question from my side about -dcri parameter. If someone mines dual, which intensity are you using for each coin pair and videocard?
depends on miner decision.i was setting -dcri 65.it gives me about 29.5 mhs of ethash and 650 mhs sia on 1070.some people set -dcri 30-45.
|
|
|
|
Zimmsquad
Member
Offline
Activity: 108
Merit: 10
|
|
February 25, 2017, 07:32:43 AM |
|
When mining on many different coins I am getting an error of illegal access of memory. Any ideas? Windows 10 64 bit
|
|
|
|
lyolyalya
|
|
February 25, 2017, 09:52:25 AM |
|
When mining on many different coins I am getting an error of illegal access of memory. Any ideas? Windows 10 64 bit
if you have less than 16GB of ram - increase pagefile manually to 16000 MB.
|
|
|
|
bapicella
Newbie
Offline
Activity: 25
Merit: 0
|
|
February 26, 2017, 01:17:41 AM |
|
When mining I am getting an error:
[2017-02-25 17:14:25] GPU #0: result for nonce 00000000 does not validate on CPU! [2017-02-25 17:14:25] GPU #0: an illegal memory access was encountered
I have updated the virtual memory to; initial: 16000 and max: 24000.
Running 5 1070's on windows 10 with the latest miner update. Drivers are up to date as well. Any ideas?
|
|
|
|
bapicella
Newbie
Offline
Activity: 25
Merit: 0
|
|
February 26, 2017, 01:24:13 AM |
|
When mining I am getting an error:
[2017-02-25 17:14:25] GPU #0: result for nonce 00000000 does not validate on CPU! [2017-02-25 17:14:25] GPU #0: an illegal memory access was encountered
I have updated the virtual memory to; initial: 16000 and max: 24000.
Running 5 1070's on windows 10 with the latest miner update. Drivers are up to date as well. Any ideas?
Note; I have 8gb of ram installed. I am getting the error with multiple coins.
|
|
|
|
Giraudy
|
|
February 26, 2017, 05:09:08 AM |
|
When mining I am getting an error:
[2017-02-25 17:14:25] GPU #0: result for nonce 00000000 does not validate on CPU! [2017-02-25 17:14:25] GPU #0: an illegal memory access was encountered
I have updated the virtual memory to; initial: 16000 and max: 24000.
Running 5 1070's on windows 10 with the latest miner update. Drivers are up to date as well. Any ideas?
Which coin/algo are you mining?
|
|
|
|
bapicella
Newbie
Offline
Activity: 25
Merit: 0
|
|
February 26, 2017, 05:18:30 AM |
|
I think I just figured it out. I had to drop back to January 2016 drivers!
|
|
|
|
lyolyalya
|
|
February 26, 2017, 06:14:38 AM |
|
have 3 gpus, win 10x64, latest drivers.mine over 10 coins with auto switching.4 gb ram, athlon x 2 (2.8 GH) - no such problems at all...but i was trying dozens of ccminers before it was stable.so - look at miners.in my situation i have one miner for one coin except alexis miner for lyra2rev2,lbry and sibcoin.
|
|
|
|
|