Bonz
Full Member
Offline
Activity: 213
Merit: 100
Mining history: BTC->LTC->FTC->CRC:2200kh/s
|
|
August 22, 2013, 04:39:24 AM |
|
have you tried wiring better power to the jaycar? yeh, i got 2 of those 10 port ones with another 3 on the slow boat from china running on an atx psu. Hoping they arrive soon so I can finally get it sorted. There is very few options locally which is why I ended up with the one from jaycar.
|
If I've helped you, who knows it could happen =) PLZ donate BTC - 34CGHYkhKi2eFP5GBhtsNpQdFvrxo7WT1u LTC - WfGiVRgBTLWzfiEfg69QVReWiDvMuQxxHW FTC - 9x9DT1QDe9bP5E75gSDnkwbVWmwjevpiAQ CRC - Q5swva1yTrD3Gh7HijDSiETvk6evpe5apl
|
|
|
ct1aic
|
|
August 22, 2013, 05:14:54 AM |
|
I use one of those and I'm waiting for 2 more. I use it with a multivolt power unit that gives me 7,5Amperes @ 5volts. I need to have one of those.
|
Rui Costa, Portugal - BTC : 1ct1aicGoUVpZeovsw3cCcPJZJHV5JXtW
|
|
|
Bonz
Full Member
Offline
Activity: 213
Merit: 100
Mining history: BTC->LTC->FTC->CRC:2200kh/s
|
|
August 22, 2013, 06:19:24 AM |
|
it works fantastic I run everything off of it my 4 hubs 3 fans and the PI i have 35 miners (1 open slot) =D I need to have one of those.
|
If I've helped you, who knows it could happen =) PLZ donate BTC - 34CGHYkhKi2eFP5GBhtsNpQdFvrxo7WT1u LTC - WfGiVRgBTLWzfiEfg69QVReWiDvMuQxxHW FTC - 9x9DT1QDe9bP5E75gSDnkwbVWmwjevpiAQ CRC - Q5swva1yTrD3Gh7HijDSiETvk6evpe5apl
|
|
|
southerngentuk
Sr. Member
Offline
Activity: 1316
Merit: 254
Sugars.zone | DatingFi - Earn for Posting
|
|
August 22, 2013, 07:54:37 AM |
|
have you tried wiring better power to the jaycar? yeh, i got 2 of those 10 port ones with another 3 on the slow boat from china running on an atx psu. Hoping they arrive soon so I can finally get it sorted. There is very few options locally which is why I ended up with the one from jaycar.
yes, I shortened the lead to about 4 inches and soldered it to its own 5V rail on my PSU (when i first got it I was gonna solder straight to the pcb, like I did with the ebay hubs, but didn't look to be easy so i closed it up again) It was doing 7 usb's and now 3 so am sure it is screwed.. I think after 3 they do mine but they really don't look happy so I unplugged them asap.
|
SUGAR | | | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | | | | | | | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | ███████████████████████████ ███████████████████████████ ██████ ██████ ██████ ▄████▀ ██████ ██████▄▄▄███▀ ▄█ ██████ ██████████▀ ▄███ ██████ ████████▀ ▄█████▄▄▄██████ ██████▀ ▄███████▀▀▀██████ ██████ ▀▀▀▀▀▀▀▀▀ ██████ ██████ ██████ ███████████████████████████ ███████████████████████████ | . Backed By ZetaChain | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | | |
|
|
|
Polyatomic
|
|
August 22, 2013, 08:45:11 AM |
|
jaycar sells those aswell.
|
|
|
|
ct1aic
|
|
August 22, 2013, 08:57:32 AM Last edit: August 22, 2013, 10:00:55 AM by ct1aic |
|
2 more RPI reboots during the night...
UPDATE: One more reboot during the morning...
|
Rui Costa, Portugal - BTC : 1ct1aicGoUVpZeovsw3cCcPJZJHV5JXtW
|
|
|
Scorpia
Member
Offline
Activity: 73
Merit: 10
|
|
August 22, 2013, 09:26:39 AM Last edit: August 22, 2013, 09:41:08 AM by Scorpia |
|
im wondering if the arch Linux has updated a usb driver or something as I had been unable to get v0.2.3 running for more than a couple of minutes but once I read the last few posts and unplugged my 13 port USB hub it now seems to be running ok. my belkin 4 port hub seems to work ok.
does Linux have a USB hub driver? has it been updated since v0.2.2
maybe arch Linux doesn't like some hub chipsets. is there a command to see the details of the USB hubs plugged in.
does this sound possible?
oh and the exact same system has been running ok with v0.2.2 but it was crashing every few days.
also to the person who couldn't use past the 3rd port, I would suspect there is 2 or more chips in the hub of 4 ports each. and once you hit the second chip it seems to be funny.
|
|
|
|
southerngentuk
Sr. Member
Offline
Activity: 1316
Merit: 254
Sugars.zone | DatingFi - Earn for Posting
|
|
August 22, 2013, 09:34:47 AM |
|
im wondering if the arch Linux has updated a usb driver or something as I had been unable to get v0.2.3 running for more than a couple of minutes but once I read the last few posts and unplugged my 13 port USB hub it now seems to be running ok. my belkin hub seems to work ok.
does Linux have a USB hub driver? has it been updated since v0.2.2
oh and the exact same system has been running ok with v0.2.2 but it was crashing every few days.
maybe arch Linux doesn't like some hub chipsets. is there a command to see the details of the USB hubs plugged in.
does this sound possible?
also to the person who couldn't use past the 3rd port, I would suspect there is 2 or more chips in the hub of 4 ports each. and once you hit the second chip it seems to be funny.
Glad am not the only one..I can get 0.2.3(a) running but its like a disco on my erupters (22 randomly going idle) where as on 0.2.2 there 100%
|
SUGAR | | | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | | | | | | | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | ███████████████████████████ ███████████████████████████ ██████ ██████ ██████ ▄████▀ ██████ ██████▄▄▄███▀ ▄█ ██████ ██████████▀ ▄███ ██████ ████████▀ ▄█████▄▄▄██████ ██████▀ ▄███████▀▀▀██████ ██████ ▀▀▀▀▀▀▀▀▀ ██████ ██████ ██████ ███████████████████████████ ███████████████████████████ | . Backed By ZetaChain | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | | |
|
|
|
ct1aic
|
|
August 22, 2013, 12:14:31 PM |
|
This time it was "the worst case scenario". cgminer frozen for as least 1 hour, until I saw my hashing graphics @ Triplemining.com and connected home and had to reboot the RPI. I could connect to the RPI via SSH, enter screen mode, but cgminer was frozen, not updating the display or accepting commands. I had to force a "sudo reboot" to reboot RPI. It was 13:05 and cgminer stopped working @ 11:56:17, as can be seen in this print screen:
|
Rui Costa, Portugal - BTC : 1ct1aicGoUVpZeovsw3cCcPJZJHV5JXtW
|
|
|
Scorpia
Member
Offline
Activity: 73
Merit: 10
|
|
August 22, 2013, 01:22:40 PM |
|
also some other things ive noticed with 0.2.3a.
the status page asks you to click the login prompt every time you select it but it does remember the password at least. also on the advanced page there is no dropdown for the timezones.
Also I have got a "dolphin" USB 3 4 port hub and it seems to work ok. so its only some USB hubs that are causing an issue.
|
|
|
|
ninjaboon
Legendary
Offline
Activity: 2128
Merit: 1002
|
|
August 22, 2013, 02:09:23 PM |
|
also on the advanced page there is no dropdown for the timezones.
For RPI, setup your location zone timedatectl list-timezones Then enter your Zone into the following: timedatectl set-timezone <Zone>/<SubZone> example: timedatectl set-timezone Asia/Kuala_Lumpur Then update the Time: or And when I first booted my RPI, it could not get an IP from the DHCP server. So this command will do the trick after bootup:
|
|
|
|
LordTheron
|
|
August 22, 2013, 03:13:05 PM |
|
2 more RPI reboots during the night...
UPDATE: One more reboot during the morning...
I get reboots every hour or so. Sometimes every few minutes. Not sure what wrong.
|
|
|
|
ct1aic
|
|
August 22, 2013, 07:08:41 PM |
|
Upgraded MinePeon 0.2.3a to cgminer 3.4.0, to see what happens next...
|
Rui Costa, Portugal - BTC : 1ct1aicGoUVpZeovsw3cCcPJZJHV5JXtW
|
|
|
r7970
Newbie
Offline
Activity: 43
Merit: 0
|
|
August 22, 2013, 07:12:25 PM |
|
The pi gets hot really fast. If it is rebooting the heat may be the problem. Try cooling it down.
|
|
|
|
ct1aic
|
|
August 22, 2013, 07:25:26 PM |
|
The pi gets hot really fast. If it is rebooting the heat may be the problem. Try cooling it down.
temp 40.1 °C... I have the RPI vented with a fan.
|
Rui Costa, Portugal - BTC : 1ct1aicGoUVpZeovsw3cCcPJZJHV5JXtW
|
|
|
ct1aic
|
|
August 22, 2013, 08:07:07 PM Last edit: August 22, 2013, 09:42:57 PM by ct1aic |
|
Upgraded MinePeon 0.2.3a to cgminer 3.4.0, to see what happens next... Started @ 20:05 and @ 20:50, RPI rebooted. New reboot @ 21:59.
|
Rui Costa, Portugal - BTC : 1ct1aicGoUVpZeovsw3cCcPJZJHV5JXtW
|
|
|
teletobi
|
|
August 22, 2013, 08:20:37 PM |
|
I'm running 0.2.3 for 3 days 1 hr 14 min 36 sec now. No reboot yet. Only the Miner reboots once a Day when Internet is forced to reconnect.
|
|
|
|
Isamaru
Newbie
Offline
Activity: 53
Merit: 0
|
|
August 22, 2013, 08:37:22 PM |
|
here's my bugs report minepeon@0.2.3Bugs in the WebUi: static page http://imageshack.us/a/img850/2828/slzh.jpghttp://imageshack.us/a/img17/8725/i600.jpgadvanced page http://imageshack.us/a/img850/2371/2q4s.jpgwhy the static page dont show the Mh/s of the devices? on the advanced page the hashes are good why are the graphs all fucked up, (in Kh/s) year 1970 ( i know, the RPi dont have internal battery to save the date, but in 0.2.2 it was good) http://imageshack.us/a/img826/4924/07hu.jpghttp://imageshack.us/a/img59/9751/5mqi.jpgthe Rpi reboots 2 times/day, and when it does i've to unplug it and the modem, plug in the modem and when its ready plug the Rpi if i dont do this, the cgminer never starts again, because it cant find an IP, idk if i'm not at home do to this, i lose mining time
|
|
|
|
Scorpia
Member
Offline
Activity: 73
Merit: 10
|
|
August 22, 2013, 08:40:35 PM |
|
Upgraded MinePeon 0.2.3a to cgminer 3.4.0, to see what happens next... Started @ 20:05 and @ 20:50, RPI rebooted. what USB hubs do you have connected? an you disconnect all but one and see if it works with one then add more. if they are different brands try the different ones to see if one is stable. the Rpi reboots 2 times/day, and when it does i've to unplug it and the modem, plug in the modem and when its ready plug the Rpi if i dont do this, the cgminer never starts again, because it cant find an IP, idk if i'm not at home do to this, i lose mining time I find with mine that when it boots up the ntpd sets the time. once that has happened if you restart the miners (click submit on the pools page) it seems to fix up the issues with the graphs and not seeing the devices Mh/s Also mine ran overnight . so one now has 12 hours uptime and the second has about 7.5Hrs since I changed the hubs around.
|
|
|
|
A_Member
Newbie
Offline
Activity: 27
Merit: 0
|
|
August 22, 2013, 08:47:24 PM |
|
Maybe the newest versions of MinePeon are somehow incompatible with bfgminer. I will check into this when I get home, it would be a bit of a bummer if it is true. The only reason I have been able to support both bfgminer and cgminer is because the API is the same and if they start to differ there is going to be problems. Neil That makes sense. Let me know what you find out.
|
|
|
|
|