j2james
Newbie
 Offline
Activity: 80
Merit: 0
|
 |
March 15, 2018, 01:26:42 PM |
|
@Claymore seem there's issues with 11.5 and nvidia cards. i am getting a terrible fluctuation on reported hashrate https://preview.ibb.co/ij0KNx/reported.pngETH - Total Speed: 188.675 Mh/s, Total Shares: 2285, Rejected: 0, Time: 13:25
ETH: GPU0 31.579 Mh/s, GPU1 31.503 Mh/s, GPU2 30.955 Mh/s, GPU3 31.549 Mh/s, GPU4 31.540 Mh/s, GPU5 31.550 Mh/s
ETH: 03/15/18-11:35:04 - SHARE FOUND - (GPU 2)
ETH: Share accepted (47 ms)!
ETH: 03/15/18-11:35:09 - New job from eu1.ethermine.org:5555
ETH - Total Speed: [b]156.278 Mh/s[/b], Total Shares: 2286, Rejected: 0, Time: 13:25
ETH: GPU0 25.105 Mh/s, GPU1 25.118 Mh/s, GPU2 26.570 Mh/s, GPU3 26.366 Mh/s, GPU4 26.521 Mh/s, GPU5 26.598 Mh/s
ETH: 03/15/18-11:35:22 - New job from eu1.ethermine.org:5555
ETH - Total Speed: 186.744 Mh/s, Total Shares: 2286, Rejected: 0, Time: 13:25
ETH: GPU0 31.149 Mh/s, GPU1 31.464 Mh/s, GPU2 31.531 Mh/s, GPU3 29.711 Mh/s, GPU4 31.457 Mh/s, GPU5 31.433 Mh/s
ETH: 03/15/18-11:36:08 - New job from eu1.ethermine.org:5555
ETH - Total Speed: [b]175.530 Mh/s[/b], Total Shares: 2287, Rejected: 0, Time: 13:26
ETH: GPU0 28.538 Mh/s, GPU1 26.970 Mh/s, GPU2 31.539 Mh/s, GPU3 28.457 Mh/s, GPU4 31.550 Mh/s, GPU5 28.477 Mh/s
ETH: 03/15/18-11:36:09 - New job from eu1.ethermine.org:5555
ETH - Total Speed: 187.653 Mh/s, Total Shares: 2287, Rejected: 0, Time: 13:26
ETH: GPU0 31.562 Mh/s, GPU1 31.523 Mh/s, GPU2 30.570 Mh/s, GPU3 31.454 Mh/s, GPU4 31.554 Mh/s, GPU5 30.989 Mh/s
ETH: 03/15/18-11:36:11 - SHARE FOUND - (GPU 1)
ETH: Share accepted (47 ms)!
ETH: 03/15/18-11:36:17 - New job from eu1.ethermine.org:5555
ETH - Total Speed: 189.257 Mh/s, Total Shares: 2288, Rejected: 0, Time: 13:26
ETH: GPU0 31.550 Mh/s, GPU1 31.503 Mh/s, GPU2 31.549 Mh/s, GPU3 31.549 Mh/s, GPU4 31.537 Mh/s, GPU5 31.569 Mh/s
ETH: 03/15/18-11:36:19 - New job from eu1.ethermine.org:5555 as you can see, it goes as low as 156MH/s | 175MH/s, etc ... the rig does 188MH/s with 6 nvidia 1070, on previous versions. anyone experiencing the same? I have the same beginning from 11.0. So I'm still using 10.6. |
|
|
|
|
|
|
|
|
|
|
|
Once a transaction has 6 confirmations, it is extremely unlikely that an attacker without at least 50% of the network's computation power would be able to reverse it.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
DeDeRa
Newbie
Offline
Activity: 8
Merit: 0
|
|
March 15, 2018, 01:36:26 PM |
|
Hi guys.
On Claymore 10.6 i had 550 hours on a row on nanopool, last time i upgrade to 11.4 2 days ago, no issues and hashrate was +0.5 better sometimes and sometimes just -0.5 less than the reported, most of the time...i had more average than reported, which is crazy. I upgrade tot 11.4 and my average hashrate drop to around 5 to 6 mhs less... I check and note down my average 24 hours hashrate 3 times per day and in 550 hours i had the average almost as the reported. With 11.4 although i have it only for 2 days, i never went beyond 187.0 mhs although i have 192.9 reported...over 5 mhs average lost in the dark. So 11.4 is broken, something is working really bad right there. I will let it run one more day, but im sure the 11.4 is garbage, thats all and i will stay with 10.6.
Good luck!
|
|
|
|
|
mine_phun
Newbie
Offline
Activity: 208
Merit: 0
|
|
March 15, 2018, 01:42:24 PM
Last edit: March 15, 2018, 02:45:13 PM by mine_phun |
|
IMPORTANT UPDATE 15-3-2018: As from today we enabled mining with your Litecoin wallet for the Blake2S / Keccak and YescryptR16 coins. Just put in your Litecoin wallet address and use password x and select your algo to mine. The pool will pay you straight into your Litecoin (Coinbase/GDAX) wallet so you can convert straight to Eur/USD! ... this will save you a lot of time / effort and conversioncost!! Example: -o stratum+tcp://mine.nlpool.nl:5766 -dwal <LTC_WALLET_ADDRESS> -dpsw c=xvg -dcoin blake2s | To mine XVG only and get payed in LTC
NLPool is a Dutch miningpool running in Amsterdam the Netherlands. The pool has been setup to provide a good and stable pool for people who are located in the Netherlands or Benelux. Our pool is dedicated to have less latency meaning lower risks for stale shares. This means you will get higher profits. Our philosophy: - Performance - Profit by lowering latency and stale shares - Security - Minimum fees Our mining fee will be of 0% for all Blake2S algo coins until April 1st. After the launch period, it will be fixed between 0.5% and 1% How to contact us ? E-mail: nlpool.nl@outlook.comTelegram: : t.me/nlpool Key features: - Amsterdam dedicated server with DDos Protection - Small mining fee : 0% during the 2 months launch period. After, between 0,5% and 1% - Anonymous and no registration ! - Hourly payments - yiimp multi-algo with several coins - Everything is tested on a second non-productive server before launching to minimize your risks on the actual mining pool. (new stratum, webpages changes, payments and other code updates) |
|
|
|
|
whoismoses
Member
Offline
Activity: 247
Merit: 59
|
|
March 15, 2018, 01:42:28 PM |
|
Hi guys.
On Claymore 10.6 i had 550 hours on a row on nanopool, last time i upgrade to 11.4 2 days ago, no issues and hashrate was +0.5 better sometimes and sometimes just -0.5 less than the reported, most of the time...i had more average than reported, which is crazy. I upgrade tot 11.4 and my average hashrate drop to around 5 to 6 mhs less... I check and note down my average 24 hours hashrate 3 times per day and in 550 hours i had the average almost as the reported. With 11.4 although i have it only for 2 days, i never went beyond 187.0 mhs although i have 192.9 reported...over 5 mhs average lost in the dark. So 11.4 is broken, something is working really bad right there. I will let it run one more day, but im sure the 11.4 is garbage, thats all and i will stay with 10.6.
Good luck!
I had similar results, however over the last 12 or so hours I have had several cards lose their over clock and some rigs go offline. I've updated to 11.5 for the rigs having trouble with the oldkernels flag. Let's see if that is better. I'd say I had a rock solid setup prior to 11.4, since 11.4 33% of my rigs have crashed. |
|
|
|
|
atecubanoS
Newbie
Offline
Activity: 32
Merit: 0
|
|
March 15, 2018, 01:43:21 PM |
|
Why people stills report problem without specify their setup?
A LOT of posts here ppl complains but don't post their OS, their drivers even their GPUs!!! WTF?!
Looks like the fluctuation problem is related to ethermine... Just a guess...
|
|
|
|
|
RuMiner
Member
Offline
Activity: 168
Merit: 15
|
|
March 15, 2018, 03:03:11 PM |
|
I've noticed with the newer versions from 11.2 although claymore shows higher hashrate the calculated hashrate at the pool is significantly lower. I've reduced the clocks on a couple of cards so no memory errors but still a lot lower. Anyone experience this? Any suggestions? I posted this screen recently: https://yadi.sk/i/VqsiqXBk3TPi24Arrow shows changing 11.4 to 11.5 with old kernels (i.e. like 11.1 miner). It definitely works better. rigs uptime 21 hours. When you first run version 11.5
Windows wrote the error that the program EthDcrMiner64.exe is stopped! I got such window on 11.2 - 11.4 miners. If you find this crash in eventlog, it shows amdocl64.dll is responsible for it. "-oldkernels 1" fixed this for me. |
|
|
|
|
Viaggiatore
Newbie
Offline
Activity: 56
Merit: 0
|
|
March 15, 2018, 03:14:39 PM |
|
Why people stills report problem without specify their setup?
A LOT of posts here ppl complains but don't post their OS, their drivers even their GPUs!!! WTF?!
Looks like the fluctuation problem is related to ethermine... Just a guess...
Something is very wrong with ethermine in these latest 2 days!! Going with nanopool for a while to see if there is a difference |
|
|
|
|
alex_85
Newbie
Offline
Activity: 55
Merit: 0
|
|
March 15, 2018, 03:19:33 PM |
|
Yep, ethermine stale shares went from 1-2% to 8-12% , at the moment i have 3 % staoe shares. Could we ask ethermine if there is any reason for that? will see how it will stay...
|
|
|
|
|
mine_phun
Newbie
Offline
Activity: 208
Merit: 0
|
|
March 15, 2018, 03:46:14 PM |
|
Yep, ethermine stale shares went from 1-2% to 8-12% , at the moment i have 3 % staoe shares. Could we ask ethermine if there is any reason for that? will see how it will stay...
The reason for that is that the pool difficulty @ Ethermine is set to low. Then the chance of you finding a share someone else found are higher. A simple raise of difficulty would help here. The difficulty @ nanopool has been set higher, so you see less, or no stales there. |
|
|
|
|
Viaggiatore
Newbie
Offline
Activity: 56
Merit: 0
|
|
March 15, 2018, 03:58:07 PM |
|
Yep, ethermine stale shares went from 1-2% to 8-12% , at the moment i have 3 % staoe shares. Could we ask ethermine if there is any reason for that? will see how it will stay...
My stale shares are very low in these days (1%) but also effective and average had a steep decrease, like I'm not getting shares. Moved to SSL ethermine server just to see if there is a difference. Also put a rig on nanopool for comparison |
|
|
|
|
DeDeRa
Newbie
Offline
Activity: 8
Merit: 0
|
|
March 15, 2018, 04:02:17 PM |
|
Its not ethermine, im on nanopool and its getting worse by the day, but the fault is from Claymore. I had almost same average hashrate like the reported, in many days even more, for weeks, with 10 to 10.6, but i was a fuckin idiot and changed to this shit 11.5 and i get 5 to 9 less mhs than reported... Its utterly and absolutly garbage. I will go back to 10.6...
|
|
|
|
|
|
Ursul0
|
|
March 15, 2018, 04:07:34 PM |
|
I flashed my RX 570's back in April 2017.
Claymore's miner has been working stable in version 11.4, 11.3 and any previous version just as well.
I think you guys complaining about crashes must have dodgy memory straps or are just overclocking too far. Just check the log, identify the GPU going down and dial back that OC.
good for you. there's however indeed some instability of the v 11.4 version. Never before the application had crashed on me, and I'm talking hundreds gpus( with 11.4 already two occasions on different workers) also on some of the cards I had to reduce the mem clocks to get back to stable operations |
|
|
|
|
big al
Member
Offline
Activity: 140
Merit: 10
|
|
March 15, 2018, 05:14:41 PM |
|
So in a perfect world effective hash rate would be 2% lower than reported on ethermine?
|
|
|
|
|
|
Teress
|
|
March 15, 2018, 05:15:35 PM |
|
So in a perfect world effective hash rate would be 2% lower than reported on ethermine?
I've got higher |
|
|
|
|
infectedmushi
Newbie
Offline
Activity: 46
Merit: 0
|
|
March 15, 2018, 05:19:59 PM |
|
@Claymore seem there's issues with 11.5 and nvidia cards. i am getting a terrible fluctuation on reported hashrate https://preview.ibb.co/ij0KNx/reported.pngas you can see, it goes as low as 156MH/s | 175MH/s, etc ... the rig does 188MH/s with 6 nvidia 1070, on previous versions. anyone experiencing the same? No problem here... ETH: 03/15/18-09:44:43 - New job from eth.suprnova.cc:5000
ETH - Total Speed: 141.293 Mh/s, Total Shares: 2123, Rejected: 0, Time: 18:09
ETH: GPU0 26.806 Mh/s, GPU1 20.281 Mh/s, GPU2 26.661 Mh/s, GPU3 20.363 Mh/s, GPU4 20.389 Mh/s, GPU5 26.794 Mh/s
GPU #0: GeForce GTX 1070 Ti, 8113 MB available, 19 compute units, capability: 6.1 (pci bus 1:0:0)
GPU #1: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 2:0:0)
GPU #2: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1 (pci bus 3:0:0)
GPU #3: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 5:0:0)
GPU #4: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 6:0:0)
GPU #5: GeForce GTX 1070 Ti, 8114 MB available, 19 compute units, capability: 6.1 (pci bus 7:0:0)
ETH - Total Speed: 141.374 Mh/s, Total Shares: 2123(400+304+385+316+334+384), Rejected: 0(0+0+0+0+0+0), Time: 18:09
ETH: GPU0 26.824 Mh/s, GPU1 20.355 Mh/s, GPU2 26.648 Mh/s, GPU3 20.352 Mh/s, GPU4 20.373 Mh/s, GPU5 26.823 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 140.837 Mh/s ETH: 03/15/18-09:46:29 - New job from eth.suprnova.cc:5000
ETH - Total Speed: 141.418 Mh/s, Total Shares: 2127, Rejected: 0, Time: 18:11
ETH: GPU0 26.829 Mh/s, GPU1 20.381 Mh/s, GPU2 26.677 Mh/s, GPU3 20.347 Mh/s, GPU4 20.365 Mh/s, GPU5 26.819 Mh/s
GPU #0: GeForce GTX 1070 Ti, 8113 MB available, 19 compute units, capability: 6.1 (pci bus 1:0:0)
GPU #1: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 2:0:0)
GPU #2: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1 (pci bus 3:0:0)
GPU #3: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 5:0:0)
GPU #4: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 6:0:0)
GPU #5: GeForce GTX 1070 Ti, 8114 MB available, 19 compute units, capability: 6.1 (pci bus 7:0:0)
ETH - Total Speed: 141.339 Mh/s, Total Shares: 2127(400+305+385+317+334+386), Rejected: 0(0+0+0+0+0+0), Time: 18:11
ETH: GPU0 26.782 Mh/s, GPU1 20.359 Mh/s, GPU2 26.648 Mh/s, GPU3 20.356 Mh/s, GPU4 20.387 Mh/s, GPU5 26.808 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 140.881 Mh/s ETH: 03/15/18-09:47:09 - New job from eth.suprnova.cc:5000
ETH - Total Speed: 139.801 Mh/s, Total Shares: 2128, Rejected: 0, Time: 18:11
ETH: GPU0 26.816 Mh/s, GPU1 19.637 Mh/s, GPU2 26.383 Mh/s, GPU3 19.762 Mh/s, GPU4 20.388 Mh/s, GPU5 26.816 Mh/s
GPU #0: GeForce GTX 1070 Ti, 8113 MB available, 19 compute units, capability: 6.1 (pci bus 1:0:0)
GPU #1: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 2:0:0)
GPU #2: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1 (pci bus 3:0:0)
GPU #3: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 5:0:0)
GPU #4: GeForce GTX 1060 6GB, 6072 MB available, 10 compute units, capability: 6.1 (pci bus 6:0:0)
GPU #5: GeForce GTX 1070 Ti, 8114 MB available, 19 compute units, capability: 6.1 (pci bus 7:0:0)
ETH - Total Speed: 141.264 Mh/s, Total Shares: 2128(400+305+385+317+334+387), Rejected: 0(0+0+0+0+0+0), Time: 18:11
ETH: GPU0 26.794 Mh/s, GPU1 20.367 Mh/s, GPU2 26.674 Mh/s, GPU3 20.230 Mh/s, GPU4 20.383 Mh/s, GPU5 26.815 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 140.940 Mh/s My configuration: MyUser@UbuntuRig:~$ nvidia-smi
Thu Mar 15 09:51:20 2018
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 387.26 Driver Version: 387.26 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 107... On | 00000000:01:00.0 Off | N/A |
| 4% 54C P2 108W / 110W | 2614MiB / 8113MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 106... On | 00000000:02:00.0 Off | N/A |
| 0% 52C P2 81W / 80W | 2570MiB / 6072MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 2 GeForce GTX 1070 On | 00000000:03:00.0 Off | N/A |
| 1% 53C P2 104W / 110W | 2592MiB / 8114MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 3 GeForce GTX 106... On | 00000000:05:00.0 Off | N/A |
| 22% 54C P2 81W / 80W | 2570MiB / 6072MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 4 GeForce GTX 106... On | 00000000:06:00.0 Off | N/A |
| 22% 54C P2 81W / 80W | 2570MiB / 6072MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 5 GeForce GTX 107... On | 00000000:07:00.0 Off | N/A |
| 0% 53C P2 113W / 110W | 2614MiB / 8114MiB | 97% Default |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 22119 C ...MyUser/Claymore/v11.5/ethdcrminer64 2595MiB |
| 1 22119 C ...MyUser/Claymore/v11.5/ethdcrminer64 2551MiB |
| 2 22119 C ...MyUser/Claymore/v11.5/ethdcrminer64 2573MiB |
| 3 22119 C ...MyUser/Claymore/v11.5/ethdcrminer64 2551MiB |
| 4 22119 C ...MyUser/Claymore/v11.5/ethdcrminer64 2551MiB |
| 5 22119 C ...MyUser/Claymore/v11.5/ethdcrminer64 2595MiB |
+-----------------------------------------------------------------------------+ how can you possible compare? you are using Linux, my report was on Windows.... |
|
|
|
|
atecubanoS
Newbie
Offline
Activity: 32
Merit: 0
|
|
March 15, 2018, 05:39:53 PM |
|
@Claymore seem there's issues with 11.5 and nvidia cards. i am getting a terrible fluctuation on reported hashrate https://preview.ibb.co/ij0KNx/reported.pngas you can see, it goes as low as 156MH/s | 175MH/s, etc ... the rig does 188MH/s with 6 nvidia 1070, on previous versions. anyone experiencing the same? No problem here... how can you possible compare? you are using Linux, my report was on Windows.... Was? Where do you specify Windows at your report?  Sorry, but I didn't find that information...  |
|
|
|
|
tg88
Legendary
Offline
Activity: 2366
Merit: 1404
|
|
March 15, 2018, 06:26:16 PM |
|
@Claymore seem there's issues with 11.5 and nvidia cards. i am getting a terrible fluctuation on reported hashrate  as you can see, it goes as low as 156MH/s | 175MH/s, etc ... the rig does 188MH/s with 6 nvidia 1070, on previous versions. anyone experiencing the same? I use AMD cards and I'm also having fluctuation on reported hashrate with 11.5 version. |
.
| ▄██████████████
███████████████
███████████████
█████████████▀░
███████████▀▄░█
██████████░███░
███████▀▀░▀▀█▀▀
█████▀░░░░░░░▀▄
█████░░░░░░░░░█
█████▄░░░░░░░▄▀
███████▄▄▄▄▄███
███████████████
▀██████████████ | ▄██████████████
███████████████
████████████▀██
█████████▀▀░░░▀
████████░░░░░░░
██████░░░░░░░░░
█████░░░░░░░░░░
█████░░░░░░░░░░
██████▄░░░░▄▄▄░
█████████▀▀░░░▀
████████▄▄▄▄▄▄▄
███████████████
▀██████████████ | ▄██████████████
███████████████
██████████▀▀▀▀▀
███████▀░▀█▄░░░
██████░░░░░█▄░▄
█████░░▄▄▄▄▄██▀
█████▀▀▀░░░░▄█▄
█████░░░▄▄█▀▀░█
██████▄█▀▀░░░░▀
███████▄▄░░░░░░
██████████▄▄▄▄▄
███████████████
▀██████████████ | ▄████████████████████████▄
██████████████████████████
█████████████░████████████
████████████▀▄████████████
█████▀▀░░░░░░░░░░░░▀▀█████
████▀░░░░░░░░░░░░░░░░▀████
████░░░██░██░░░░█░░░░░████
████░░░▄▄▀▄▄░░▀▀▄▀▀░░░████
████▄░░▀▀░▀▀░░░░▀░░░░▄████
█████▄▄░░░░░░░░░░░░▄▄█████
██████████████████████████
██████████████████████████
▀████████████████████████▀ | .
|
|
|
|
criptooo
Newbie
Offline
Activity: 34
Merit: 0
|
|
March 15, 2018, 07:19:36 PM |
|
Which version is best for my nvidia 1050 ti cards, can also share the bat file thanks
|
|
|
|
|
j2james
Newbie
Offline
Activity: 80
Merit: 0
|
|
March 15, 2018, 07:42:13 PM |
|
Which version is best for my nvidia 1050 ti cards, can also share the bat file thanks
Looks like for all NVIDIA cards 10.6 is the best |
|
|
|
|
NathanJackson
Member
Offline
Activity: 122
Merit: 10
|
|
March 15, 2018, 08:38:41 PM |
|
Highly optimized 13x RX480 rigs, custom per card bios, etc. 0 invalid shares, 24ms accept time, on eth1.ethermine.org
Was running perfeclty stable for weeks with 11.1
Witih 11.2, 11.3 and 11.4 crashes all the time.
Hash rate increases but there is no point in it if I have to lower the memclocks to keep the cards from crashing.
Back to 11.1 and stable again, relatively high stale rate (5-15%). 0 invalid shares. 24ms accept time.
Back to 10.6 and lowered stale rate even more (2%).
For me, I'll stay with 10.6
Or can you think of any cons?
|
|
|
|
|
|
