Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[dragonmike]

Not sure it's been reported yet but -fanmin doesn't work on RX Vega's on the latest Adrenalin driver (18.3.2 March12).

[1715038047]

1715038047

[1715038047]

1715038047

[1715038047]

1715038047

[thomflash]

Same here, it worked good at the begging and then it started to fluctuate (3 rigs on 11.5 oldknrl rest on 11.4)

https://i.gyazo.com/00514fdb5f9cf3aac91eba8c1121ea24.png

Click in "effective current hashrate" to remove it and you will get better resolution for the other two.  Try closing gpuz or hwmonitor.

You're right, closing gpuz solved it... Thanks big al!

[dragonmike]

Also, does -mvddc do anything for Vega cards? As far as I know HBM voltages are fixed, and defined by which bios you go for (56 or 64) aren't they?

[alex_85]

How do you measure stale shares?

CJ

Ethermine shows stale shares as %

[alex_85]

Same here, it worked good at the begging and then it started to fluctuate (3 rigs on 11.5 oldknrl rest on 11.4)

https://i.gyazo.com/00514fdb5f9cf3aac91eba8c1121ea24.png

Click in "effective current hashrate" to remove it and you will get better resolution for the other two.  Try closing gpuz or hwmonitor.

You're right, closing gpuz solved it... Thanks big al!

Do you mine running HwInfo 24/7 can affect hashrate/valid shares and overall work of the miner?

[Kwiksave]

AMD cards that are BIOS modded definitely use oldkernels
AMD cards that are overclocked right on the edge might need oldkernels

Go ahead and try new kernels. With everything the same as before. If theres any instability or increase in rejected/incorrect do not bother underclocking just go straight to oldkernels.

The main difference between the two I've found is you don't get the fluctuating hash rate with the newer ones.  So if you can get away using them do it.

That's my story and I am sticking to it.

Weird, I just upgraded to 11.5 my two rigs (rx480 and rx570) and both increase hashrate, and both have mod bios and both are stable without using oldkernels under linux.

Maybe your mod is not radical enough.

[big al]

11.5 version restarts rigs randomly, every 1-5 hour. But before restart everything is working. It 100% only this versions issue. 11.4. 11.5.

Try disabling QuickEdit Mode in the properties of your batch file

[xxcsu]

Those of you on Windows 10 getting random shutdowns do this:


Right click start. bat file - properties - options - uncheck QuickEdit Mode - apply - ok

What happens is a window like control panel, Windows defender or task manager comes up and the console freezes. Then the window goes away Claymore resumes and uh oh! Looks like our GPUs failed. But they didnt. Fall creator update did this not Claymore.

While you're in there increase the font size and make it bold.

I dont think you are right on this ...
- I dont have creartor update on my nvdia rigs , rigs working fine with v 11.2 without any problem
- 11.4 and 11.5 working fine with AMD cards, but my nvidia rigs keep restarting randomly if im using 11.4 or 11.5

So... its can not be the win 10 creator update ... and yes claymore 11.4 and 11.5 creating the random restarts , 11.2 working just fine ...

@claymore, what this means?

Code:

GPU 0, GpuMiner cu_k1 failed 77, an illegal memory access was encountered
13:45:41:406	1bd0	GPU 0, GpuMiner kx failed 1
13:45:41:406	1bd0	Set global fail flag, failed GPU0
13:45:41:407	1bd0	GPU 0 failed
13:45:41:409	1bc4	GPU 0, GpuMiner cu_k1 failed 77, an illegal memory access was encountered
13:45:41:410	1bc4	GPU 0, GpuMiner kx failed 1
13:45:41:411	1bc4	Set global fail flag, failed GPU0
13:45:41:412	1bc4	GPU 0 failed
13:45:41:452	1bcc	GPU 1, GpuMiner cu_k1 failed 77, an illegal memory access was encountered
13:45:41:453	1bcc	GPU 1, GpuMiner kx failed 1
13:45:41:454	1bcc	Set global fail flag, failed GPU1
13:45:41:455	1be0	GPU 1, GpuMiner cu_k1 failed 77, an illegal memory access was encountered
13:45:41:456	1bcc	GPU 1 failed
13:45:41:458	1be0	GPU 1, GpuMiner kx failed 1
13:45:41:459	1be0	Set global fail flag, failed GPU1
13:45:41:460	1be0	GPU 1 failed

2 x GTX 1070.

It happens only on nvidia gpus and all gpus at once. This is in your latest version 11.5v. The computer keeps restarting because of that. It does not restart straight away, time to happen it is random.

Same thing happening with me, only on nvidia GPU's ... 2x nVidia Titan V ... 11.2 working fine , as soon as i switched to 11.5 i started to get random resboots every 30-55 minutes , same errors ...

Code:

00:41:07:523	17b0	ETH: 03/16/18-00:41:07 - New job from us1.ethermine.org:4444
00:41:07:523	17b0	target: 0x0000000112e0be82 (diff: 4000MH), epoch 175(2.37GB)
00:41:07:523	17b0	ETH - Total Speed: 163.743 Mh/s, Total Shares: 119, Rejected: 0, Time: 00:54
00:41:07:523	17b0	ETH: GPU0 81.841 Mh/s, GPU1 81.902 Mh/s
00:41:07:523	17b0	 PASC - Total Speed: 1637.427 Mh/s, Total Shares: 72, Rejected: 2
00:41:07:523	17b0	 PASC: GPU0 818.405 Mh/s, GPU1 819.022 Mh/s
00:41:07:648	2464	GPU 1, GpuMiner cu_k03 failed 77, an illegal memory access was encountered
00:41:07:648	2464	GPU 1, GpuMiner kx failed 1
00:41:07:648	2464	Set global fail flag, failed GPU1
00:41:07:648	2464	GPU 1 failed
00:41:07:663	10e0	GPU 1, GpuMiner cu_k03 failed 77, an illegal memory access was encountered
00:41:07:663	10e0	GPU 1, GpuMiner kx failed 1
00:41:07:663	10e0	Set global fail flag, failed GPU1
00:41:07:663	10e0	GPU 1 failed
00:41:07:741	1ec0	GPU 0, GpuMiner cu_k03 failed 77, an illegal memory access was encountered
00:41:07:741	1ec0	GPU 0, GpuMiner kx failed 1
00:41:07:741	1ec0	Set global fail flag, failed GPU0
00:41:07:741	1ec0	GPU 0 failed
00:41:07:741	1ad4	GPU 0, GpuMiner cu_k03 failed 77, an illegal memory access was encountered
00:41:07:741	1ad4	GPU 0, GpuMiner kx failed 1
00:41:07:741	1ad4	Set global fail flag, failed GPU0
00:41:07:741	1ad4	GPU 0 failed

[whoismoses]

Claymore - Would it be possible to have the logs go into a subfolder in the next version?

[rolys]

Claymore - Would it be possible to have the logs go into a subfolder in the next version?

+1 yes that's a really good idea

[big al]

Those of you on Windows 10 getting random shutdowns do this:


Right click start. bat file - properties - options - uncheck QuickEdit Mode - apply - ok

What happens is a window like control panel, Windows defender or task manager comes up and the console freezes. Then the window goes away Claymore resumes and uh oh! Looks like our GPUs failed. But they didnt. Fall creator update did this not Claymore.

While you're in there increase the font size and make it bold.

I dont think you are right on this ...
- I dont have creartor update on my nvdia rigs , rigs working fine with v 11.2 without any problem
- 11.4 and 11.5 working fine with AMD cards, but my nvidia rigs keep restarting randomly if im using 11.4 or 11.5

So... its can not be the win 10 creator update ... and yes claymore 11.4 and 11.5 creating the random restarts , 11.2 working just fine ...

I thinj you are right.  This happened before the fall update but it is still there.  Try it both ways yourself.  Open task manager with QuickEdit enabled see what happens. It's possible claymore is now incompatible with QuickEdit mode?

Also I think you are having a different issue altogether.  I wish you luck in resolving.

[ermis1975]

Is there an official site to download the last Claymore's version? Windows 10 platform.

[big al]

Is there an official site to download the last Claymore's version? Windows 10 platform.

Page 1

[meru890]

switched from 11.0 to 11.5 and running since 5 hours stable, so far no problems. Also believe stale shares are slightly lower and performance is better (0.1 - 0.2 mh/s per card)

[Lunga Chung]

Do you mine running HwInfo 24/7 can affect hashrate/valid shares and overall work of the miner?

Yes, it can affect overall stability of a system

[AzzAz]

Claymore - Would it be possible to have the logs go into a subfolder in the next version?

+1 yes that's a really good idea

or autodelete and leave only few recent logs

[dzap]

Claymore - Would it be possible to have the logs go into a subfolder in the next version?

+1 yes that's a really good idea

or autodelete and leave only few recent logs

Both of these are already possible ages ago. in logfile add subdir like /subdir/logname_log.log and logsmaxsize set to whatever MBs you want to hold logs for.

[rolys]

Claymore - Would it be possible to have the logs go into a subfolder in the next version?

+1 yes that's a really good idea

or autodelete and leave only few recent logs

Both of these are already possible ages ago. in logfile add subdir like /subdir/logname_log.log and logsmaxsize set to whatever MBs you want to hold logs for.

i'm using windows

[xxcsu]

Is there an official site to download the last Claymore's version? Windows 10 platform.

HERE

then just scroll down till you going to see 2 option under LINKs :

LINKS:

MEGA:
GOOGLE:

[xenonwon]

It is normal that in claymore miner tell me that the fans are at 40% and really according to gpuz are at 30%?