MATHReX
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2019, 06:13:19 AM |
|
I have a question about rx5700 gpu. I was running it two weeks ago and with the current clocks it was making over 53mgh , now when I put it again it hashes with 51.50mgh . What could be the issue? Same setting, same rig.
At every epoch, there is a generating of a new DAG file with increased size. It is responsible for the decreased hash rate in Nvidia cards. There is no fix for it until and unless Nvidia releases drivers which rectifies the issue. For AMD Devices, they released Blockchain drivers which addressed this issue and fixed it. Seeing the driver page, it is not compatible with new RX 5700 series. So probably that might be the issue.
|
|
|
|
cscheat
Newbie
Offline
Activity: 84
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2019, 01:20:30 PM |
|
Will using the strap option likely make the card run hotter? Or is it just an efficiency thing?
I use '-ethi 0' (Ethereum intensity) so my card runs cooler for various reasons. Will using '-strap 1' with '-ethi 0' cancel each other out? Basically I'd like to use the strap option but not if it will make the card run hotter.
Yes it will use more electricity and it will run hotter. How the ETH algo works its mostly limited by the memory speed. So most of the time the GPU is not doing much since its waiting for the memory to complete its job. By changing the memory straps the memory runs faster and is able to provide the GPU compute the data to analyse quicker, so your speed increases from like 23MH/s to 30MH/s (if RX 570). Since the GPU uses more resources it uses more power and hence runs hotter. This is actually why it was possible to dual-mine with ETH, because the GPU didn't do much most of the time and it was possible to mine at full ETH speeds while also dual mining other coins like DCR or SIA or PASC. i got 2 cards died after using the strap and rxboost
|
|
|
|
-x-x-x-
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2019, 05:31:21 PM |
|
Hello. Help me figure out Google Chrome blocks the new version file - 15.0 , how to download from Mega.
|
|
|
|
bategojko74
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 220
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2019, 05:59:11 PM Last edit: November 28, 2019, 06:15:38 PM by bategojko74 |
|
Hello. Help me figure out Google Chrome blocks the new version file - 15.0 , how to download from Mega.
Are you joking or just started using computer and internet or heavily brain damaged? Fill the missing dots with letters: I......t E......r M.....a F.....x M.......t E..e O...a S....i And use one of them.
|
|
|
|
-x-x-x-
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2019, 06:57:16 PM |
|
Hello. Help me figure out Google Chrome blocks the new version file - 15.0 , how to download from Mega.
Are you joking or just started using computer and internet or heavily brain damaged? Fill the missing dots with letters: I......t E......r M.....a F.....x M.......t E..e O...a S....i And use one of them. дpyжищe, пoмoг пиздeц кaк, кpacaвa, пoбoльшe бы тaкиx yмникoв, мoжeт и жить нa плaнeтe cтaнeт лeгчe. Удaчи, бepeги cвoй мoзг, пoтoм в мyзeй oтпpaвишь, кaк дocтoяниe плaнeты.
|
|
|
|
bategojko74
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 220
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2019, 10:28:19 PM |
|
Hello. Help me figure out Google Chrome blocks the new version file - 15.0 , how to download from Mega.
Are you joking or just started using computer and internet or heavily brain damaged? Fill the missing dots with letters: I......t E......r M.....a F.....x M.......t E..e O...a S....i And use one of them. дpyжищe, пoмoг пиздeц кaк, кpacaвa, пoбoльшe бы тaкиx yмникoв, мoжeт и жить нa плaнeтe cтaнeт лeгчe. Удaчи, бepeги cвoй мoзг, пoтoм в мyзeй oтпpaвишь, кaк дocтoяниe плaнeты. Этo пять oчeнь извecтныx пpoгpaмм. Кaждый из ниx пoмoжeт тeбя выпoлнить paбoтy.
|
|
|
|
0xcosmos
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 29, 2019, 07:28:36 AM |
|
Hello. Help me figure out Google Chrome blocks the new version file - 15.0 , how to download from Mega.
if the website is working slow or does not load use a vpn or proxy alternatively use opera private which has vpn built in and try again
|
|
|
|
RAKOT
Jr. Member
Offline
Activity: 152
Merit: 8
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 29, 2019, 08:07:42 AM |
|
Hello. Help me figure out Google Chrome blocks the new version file - 15.0 , how to download from Mega.
Go to download menu of Chrome ( where all downloades displayed) , and choose to download the file understanding the risks.
|
|
|
|
jimmyD30
Jr. Member
Offline
Activity: 64
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 29, 2019, 12:42:13 PM |
|
Who has the best settings for Vega64 OverdriveNTool???
|
|
|
|
Bael
Jr. Member
Offline
Activity: 87
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 29, 2019, 08:23:20 PM |
|
Hi I am testing the option of -rxboost and -strap and I have a problem. I leave two captures, the second card, the one marked has the original bios, the rest modified bios. https://imgur.com/UwKg9t7https://imgur.com/zMIhxF8If I know a monitor emulator it makes me 33.2 mhs and if I remove the emulator it goes down to 29 mhs (less than with my bios modifications that gives approximately 31 mhs) Do you know if there is any solution for this? Use a monitor emulator on all cards? Regards : )
|
|
|
|
zeef
Newbie
Offline
Activity: 301
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 30, 2019, 12:20:19 AM |
|
Hi,
Any parameter that we can add to run a startup script?
I´m not finding anything in readme,
Thanks
|
|
|
|
MATHReX
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 30, 2019, 06:04:41 AM |
|
Who has the best settings for Vega64 OverdriveNTool???
You can find your own best settings as each and every card is different and it won't overclock the same. As there is no way to increase memory voltage. Increase memory speed by increments of 25 MHz until it is unstable. After this reduce core clock and core voltage in a similar fashion until it starts affecting the hashrate. Use HWInfo for any memory errors and display monitor to detect if there are any artefacts visible on the screen. My Vega 56 flash 64 air bios. Mem - 1095MHz; Core - 1246MHz; Cove(v) - 1025mV; fan - 66%
|
|
|
|
adaseb
Legendary
Offline
Activity: 3864
Merit: 1732
Up to 300% + 200 FS deposit bonuses
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 30, 2019, 06:24:56 AM |
|
Hi,
Any parameter that we can add to run a startup script?
I´m not finding anything in readme,
Thanks
I am assuming you are using Windows. If so then just drag the *.bat file into your Windows Start button or if that doesn't work then just right click and select the Move to startup folder. If these don't work then you can always run the Run command and type in shell:startup and just drag the *.bat file into that directory. My advice to you is if you want to run it on startup then you should delay it by 30-60 seconds or so, because I had issues with Claymore starting right away and Windows was still loading other apps and overclocking a few GPUs and undervolting them. So in your *.bat file put "timeout /t 60". Reason why he didn't put it in Readme is because its outside the scope of the miner program, those that need it to autorun just do it manually.
|
|
|
|
tg88
Legendary
Offline
Activity: 2506
Merit: 1434
Payment Gateway Allows Recurring Payments
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 30, 2019, 12:16:11 PM |
|
Hi,
Any parameter that we can add to run a startup script?
I´m not finding anything in readme,
Thanks
Press WIN+R and type shell:startup then paste a shortcut to the claymore batch file there to run on windows startup. Add this line to the beginning of the .bat file to delay initialization by 30 seconds: msg/time:15 /w * "Delay of 30 seconds. Waiting for windows to start ..." For example: msg/time:15 /w * "Delay of 30 seconds. Waiting for windows to start ..." EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -rxboost 1
|
|
|
|
zeef
Newbie
Offline
Activity: 301
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 30, 2019, 01:12:43 PM |
|
Hi,
Any parameter that we can add to run a startup script?
I´m not finding anything in readme,
Thanks
I am assuming you are using Windows. If so then just drag the *.bat file into your Windows Start button or if that doesn't work then just right click and select the Move to startup folder. If these don't work then you can always run the Run command and type in shell:startup and just drag the *.bat file into that directory. My advice to you is if you want to run it on startup then you should delay it by 30-60 seconds or so, because I had issues with Claymore starting right away and Windows was still loading other apps and overclocking a few GPUs and undervolting them. So in your *.bat file put "timeout /t 60". Reason why he didn't put it in Readme is because its outside the scope of the miner program, those that need it to autorun just do it manually. Hi thanks for answer, What i mean was not the windows startup, but an startup script for the claysmore : something like: --startupscript , like other miners have for ex: srbminer Regards
|
|
|
|
zeef
Newbie
Offline
Activity: 301
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 30, 2019, 01:13:07 PM |
|
Hi,
Any parameter that we can add to run a startup script?
I´m not finding anything in readme,
Thanks
Press WIN+R and type shell:startup then paste a shortcut to the claymore batch file there to run on windows startup. Add this line to the beginning of the .bat file to delay initialization by 30 seconds: msg/time:15 /w * "Delay of 30 seconds. Waiting for windows to start ..." For example: msg/time:15 /w * "Delay of 30 seconds. Waiting for windows to start ..." EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -rxboost 1 Hi thanks for answer, What i mean was not the windows startup, but an startup script for the claysmore : something like: --startupscript , like other miners have for ex: srbminer Regards
|
|
|
|
GodOfStars
Newbie
Offline
Activity: 49
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 30, 2019, 01:48:03 PM |
|
Hi there I am recently switching from Mining Moreno and I am new to Ehterium mining. On my main PC I have VEGA 64 with the latest drivers clocked to 1450 and memory to 1125 with 49MH speed and on my 13GPU VEGA 64 RIG I have 18.5.2 drivers Overdrive Ntool settings with 870mm memory to 1100 and clock to 1400 with 44MH speed. Can someone give me some info if there is a way to squeeze some extra hashes with some tweaks and settings, I have the default mining settings. Thank you
|
|
|
|
GodOfStars
Newbie
Offline
Activity: 49
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 30, 2019, 01:50:33 PM |
|
Who has the best settings for Vega64 OverdriveNTool???
You can find your own best settings as each and every card is different and it won't overclock the same. As there is no way to increase memory voltage. Increase memory speed by increments of 25 MHz until it is unstable. After this reduce core clock and core voltage in a similar fashion until it starts affecting the hashrate. Use HWInfo for any memory errors and display monitor to detect if there are any artefacts visible on the screen. My Vega 56 flash 64 air bios. Mem - 1095MHz; Core - 1246MHz; Cove(v) - 1025mV; fan - 66% What is your mining speed if i may ask with these settings?
|
|
|
|
asheko88
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 30, 2019, 03:28:05 PM |
|
hello.I have a problem use Windows 10 pro 6 rx570 4 giga divers 17.8.1 Use the latest version claymore 15 but hashrat is low 12 mh for card bat : setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x0e65d0Cc9aBeFb8fE504D7438057Bb9816a20560.ash2 -epsw x Anyone one can help
|
|
|
|
MATHReX
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 30, 2019, 03:45:03 PM |
|
What is your mining speed if i may ask with these settings?
43.8 - 44.2 MH/s Above settings with OverdriveNtool plus Soft Powerplay tables. AMDmem Tweak Vega 56 weak settings. hello.I have a problem use Windows 10 pro 6 rx570 4 giga divers 17.8.1 Use the latest version claymore 15 but hashrat is low 12 mh for card bat : setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x0e65d0Cc9aBeFb8fE504D7438057Bb9816a20560.ash2 -epsw x Anyone one can help
Did you switch to Compute from Graphics in GPU workload? https://www.amd.com/en/support/kb/faq/dh-024
|
|
|
|
|