Phoenix1969
Legendary
Offline
Activity: 938
Merit: 1000
LIR DEV
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 07:05:43 PM |
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FHZVQgRE.png&t=665&c=mYq7simhb2lxWA) 3 sats...0.97, straight up... they love 70c Are you pointing out the 128 and 256 second averages?. My 128 & 256 jump from 1600 to 3200 Gh/s constantly and I consider them almost useless. no, mostly the 3 and 12 hr... lol 3 sats @ 275 is 825 ... I'm getting that @ the pool, which is very good IMHO OOOoohhhHH!!! Can't wait for 0.98!!!
|
|
|
|
optimator
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 07:06:25 PM |
|
All,
We have noticed an increase in failures with our boxes when the firmware has been updated to 0.97.
There has been a bug identified in this firmware which can cause drop in performance in certain circumstances . There is a fix right now undergoing development but it’s not quite ready to release yet as it must undergo more testing overnight.
We are very aware that our customers are waiting for this hotfix to rescue some boxes who’s performance has dropped after applying 0.97.
The 0.98 release which is scheduled for release tomorrow will contain
1, A solution to address the bug which can cause dramatically reduced performance.
2, A bug fix which will stop the slowly reducing performance over time,
3, A new version of the CGMiner binary provided to us by the CGMiner developer’s
The update will be available tomorrow form our website,
SWEET!!!
|
|
|
|
ASIC-K
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 280
Merit: 250
Hell?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 07:07:06 PM |
|
ok mercury is now running 141ghs stable! finallllly. this is on .94 firmware. lol
|
|
|
|
WastedLTC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 07:08:04 PM |
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FHZVQgRE.png&t=665&c=mYq7simhb2lxWA) 3 sats...0.97, straight up... they love 70c Are you pointing out the 128 and 256 second averages?. My 128 & 256 jump from 1600 to 3200 Gh/s constantly and I consider them almost useless. no, mostly the 3 and 12 hr... lol 3 sats @ 275 is 825 ... I'm getting that @ the pool, which is very good IMHO Gotcha, thnx
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 07:08:23 PM |
|
Anyone noticed their miner has the date 1 Jan 2000?
clear browser cache & make sure your pc time is correct.. had that one... hehe No mine has that date on the miner, if I ssh in.
|
|
|
|
AFox
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 07:11:11 PM |
|
All,
We have noticed an increase in failures with our boxes when the firmware has been updated to 0.97.
There has been a bug identified in this firmware which can cause drop in performance in certain circumstances . There is a fix right now undergoing development but it’s not quite ready to release yet as it must undergo more testing overnight.
We are very aware that our customers are waiting for this hotfix to rescue some boxes who’s performance has dropped after applying 0.97.
The 0.98 release which is scheduled for release tomorrow will contain
1, A solution to address the bug which can cause dramatically reduced performance.
2, A bug fix which will stop the slowly reducing performance over time,
3, A new version of the CGMiner binary provided to us by the CGMiner developer’s
The update will be available tomorrow form our website,
SWEET!!! Will it be a install/apply with no possibility to go back to the actual version of CGMiner ?
|
|
|
|
xyzzy099
Legendary
Offline
Activity: 1065
Merit: 1077
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 07:14:05 PM |
|
All,
We have noticed an increase in failures with our boxes when the firmware has been updated to 0.97.
There has been a bug identified in this firmware which can cause drop in performance in certain circumstances . There is a fix right now undergoing development but it’s not quite ready to release yet as it must undergo more testing overnight.
We are very aware that our customers are waiting for this hotfix to rescue some boxes who’s performance has dropped after applying 0.97.
The 0.98 release which is scheduled for release tomorrow will contain
1, A solution to address the bug which can cause dramatically reduced performance.
2, A bug fix which will stop the slowly reducing performance over time,
3, A new version of the CGMiner binary provided to us by the CGMiner developer’s
The update will be available tomorrow form our website,
SWEET!!! Will it be a install/apply with no possibility to go back to the actual version of CGMiner ? You can always re-install an older firmware image. I think this IS the actual version of CGMiner, though ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
Libertarians: Diligently plotting to take over the world and leave you alone.
|
|
|
Phoenix1969
Legendary
Offline
Activity: 938
Merit: 1000
LIR DEV
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 07:15:14 PM |
|
Anyone noticed their miner has the date 1 Jan 2000?
clear browser cache & make sure your pc time is correct.. had that one... hehe No mine has that date on the miner, if I ssh in. then you are not using 0.97, right? That was the case for earlier firmwares....
|
|
|
|
Nemo1024
Legendary
Offline
Activity: 1680
Merit: 1014
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 07:25:57 PM |
|
Right. I've just received log-in details to the hosting portal! Better late than never, I guess. ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
“Dark times lie ahead of us and there will be a time when we must choose between what is easy and what is right.” “We are only as strong as we are united, as weak as we are divided.” “It is important to fight and fight again, and keep fighting, for only then can evil be kept at bay, though never quite eradicated.”
|
|
|
Phoenix1969
Legendary
Offline
Activity: 938
Merit: 1000
LIR DEV
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 07:29:25 PM |
|
Right. I've just received log-in details to the hosting portal! Better late than never, I guess. ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) right on... doggone good to hear... enjoy... ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 07:57:48 PM |
|
Anyone noticed their miner has the date 1 Jan 2000?
clear browser cache & make sure your pc time is correct.. had that one... hehe No mine has that date on the miner, if I ssh in. then you are not using 0.97, right? That was the case for earlier firmwares.... Nope, been on 0.97 since it was released
|
|
|
|
Nemo1024
Legendary
Offline
Activity: 1680
Merit: 1014
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 07:59:28 PM |
|
Nice to see that you can add as any back-up pools as you want in the portal. Pointed mine to BitMinter and will let it run for a while. I should expect about 240-260GH/s on the pool side, correct?
|
“Dark times lie ahead of us and there will be a time when we must choose between what is easy and what is right.” “We are only as strong as we are united, as weak as we are divided.” “It is important to fight and fight again, and keep fighting, for only then can evil be kept at bay, though never quite eradicated.”
|
|
|
-ck
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 08:13:05 PM |
|
For those bound on risk I wonder if the removed USB port is possible to be soldered back to copy over these files. Probably the biggest risk would be warranty wise?
Should be a lot safer just to buy another BBB & copy the image over. huh? it's simple enough using putty, why would we need a bbb?... lol his code is stored in RAM anyway... right? a cold restart works fine.... at least it did for my 3 sats... the location of the .factory file was mentioned early on... surely folks made a backup of it? can't use putty if the machine won't come up on the network due to deleted critical files. And since the USB has been disabled...the number of choices is sort of whittled down. Best solution is to, of course, not delete the files in the first place ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) And how does one restore said backup if one can't access the machine ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Cklovas nor any rep ever never instructed anyone to erase the .factory files. Don't know why someone would do such a thing. agreed and addressed in edit above Indeed NOT. My instructions were quite explicit and said nothing about deleting or replacing any files.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
ElGabo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 08:22:06 PM |
|
Hey CKolivas!
Had they contacted you to give some help to the firmware?
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
demonmaestro
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 08:25:12 PM |
|
Order 64XX Shipped... ABOUT damn time. ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) only 13 days late. ![Angry](https://bitcointalk.org/Smileys/default/angry.gif) Lets see how long it takes to get to me. I paid for one day shipping.
|
Feel Like Donating? bc1q0v5nfdejapffewu67gft7zw7zsmnfmmkt3lf02 Buy/Sell BitCoin & LiteCoin Click here! | Looking for a great exchange? CoinBase Has you covered.
|
|
|
ASIC-K
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 280
Merit: 250
Hell?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 08:26:03 PM |
|
|
|
|
|
-ck
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 08:31:18 PM |
|
I've just created a kncminer branch on my github and have imported their most current code and built my first binary for this. It is not a full firmware and the only thing users may note is the hashrate won't lie with this one, as it won't count hardware errors as hashrate. Also my hardware error count is significantly lower with this on the Saturn dev machine I was sent.
Sorry, I have to disagree on 'only thing users may note is the hashrate won't lie'. Not even running cgminer v3.6.6 for 12h now and I have to report my hashrate increases ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I'm runinng Jupiter with firmware v0.95 and 72h avg hashrate graph went from 520-535 GH/s up to 553GH/s still climbing, yay!! as hint for others: it took some time until increase in hashrate was noticeable, the first 30-60min I didn't see a change, then went to bed - when checking stats today I was surprised by the obvious hashrate increase yo ckolivas, a donation will hit your wallet soon, will mine a little into your pocket this evening - hope others will do so as well In order to do so, just add an additional pool for some time to cgminer, like eligius with his wallet id as username and use balanced workload distribution You can use the following example to mine with ~ 1/3 of your total hashing rate into his wallet for some time. cgminer -o http://your_1st_default_pool:port -u user -p pass \ -o http://your_2nd_default_pool:port -u user -p pass \ -o stratum+tcp://stratum.mining.eligius.st:3334 -u 148KkS2vgVi4VzUi4JcKzM2PMaMVPi3nnq -p none \ --balance
Thanks for the good work! Thanks ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Yes I noticed a hashrate rise as well but I like to be conservative with my estimates. The hardware error rate dropped over time too. My Saturn running overnight ~diff 194 [ASC0] => ( [ASC] => 0 [Name] => KnC [ID] => 0 [Enabled] => Y [Status] => Alive [Temperature] => 0.00 [MHS av] => 272496.90 [MHS 5s] => 281905.62 [Accepted] => 14210 [Rejected] => 43 [Hardware Errors] => 53456 [Utility] => 20.51 [Last Share Pool] => 0 [Last Share Time] => 1382992145 [Total MH] => 11328495934.2458 [Diff1 Work] => 2637626 [Difficulty Accepted] => 2632036.00000000 [Difficulty Rejected] => 7763.00000000 [Last Share Difficulty] => 194.00000000 [Last Valid Work] => 1382992150 [Device Hardware%] => 1.9864 [Device Rejected%] => 0.2943 [Device Elapsed] => 41573 )
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
ElGabo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 08:46:33 PM |
|
Which firmware is this? 0.9 Dc output is interesting.... ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
ASIC-K
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 280
Merit: 250
Hell?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 08:47:46 PM |
|
its .94 but seems unstable.
|
|
|
|
ElGabo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2013, 08:49:50 PM |
|
its .94 but seems unstable.
yep, it's not stable.... 0.9 dc output with higher clock and the stability of 0.96. That would be magic. (I think ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) )
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
|