Vanitygen: Vanity bitcoin address generator/miner [v0.22]

[sbtctalk]

Can the generated vanity address be used straight away? As long as we hold the private key, I believe it can be loaded into any btc wallet client?

Correct, you can use it right away. To make sure everything worked I suggest to sign a message with the address. That way you know its working without risking a single satoshi.

I see. So by signing and verifiying a message is a good measure to test validity.

I sent coins to a vanity address i generated. It is working.

[shorena]

Can the generated vanity address be used straight away? As long as we hold the private key, I believe it can be loaded into any btc wallet client?

Correct, you can use it right away. To make sure everything worked I suggest to sign a message with the address. That way you know its working without risking a single satoshi.

I see. So by signing and verifiying a message is a good measure to test validity.

I sent coins to a vanity address i generated. It is working.

Yes, signing makes sure you can spend the coins. You can always receive coins on any address, the important question is whether the private key is under your control. Its hardly an issue considering how most wallets work you can be sure its correct once you imported the private key and the address shows up correctly. For the paranoid a signed message should do.

[sbtctalk]

Can the generated vanity address be used straight away? As long as we hold the private key, I believe it can be loaded into any btc wallet client?

Correct, you can use it right away. To make sure everything worked I suggest to sign a message with the address. That way you know its working without risking a single satoshi.

I see. So by signing and verifiying a message is a good measure to test validity.

I sent coins to a vanity address i generated. It is working.

Yes, signing makes sure you can spend the coins. You can always receive coins on any address, the important question is whether the private key is under your control. Its hardly an issue considering how most wallets work you can be sure its correct once you imported the private key and the address shows up correctly. For the paranoid a signed message should do.

Thank u. These vanity addresses could serve organisations and businesses well, if there is enough power to generate it proper

[ed-ro0t]

greetings,
have short viewed the topic but found nothing about my actual question.
i want to know if is possible to use external asic instead of cpu for vanitygen.
surely anyone here can help me out, thanks.

[shorena]

greetings,
have short viewed the topic but found nothing about my actual question.
i want to know if is possible to use external asic instead of cpu for vanitygen.
surely anyone here can help me out, thanks.

No. ASICs only do sha256d. Address creation requires ripemd-160(sha256(pubkey)) for the main part and sha256d for the checksum bytes.

[siameze]

greetings,
have short viewed the topic but found nothing about my actual question.
i want to know if is possible to use external asic instead of cpu for vanitygen.
surely anyone here can help me out, thanks.

You can, however, use oclvanitygen to generate addresses a bit quicker using GPU cards. Good luck with your efforts!

[ezeminer]

greetings,
have short viewed the topic but found nothing about my actual question.
i want to know if is possible to use external asic instead of cpu for vanitygen.
surely anyone here can help me out, thanks.

If you don't have a GPU that generates addresses at a good rate, you can ask shorena to generate addresses for you.
Using this method mentioned in the OP.

I have a lot of compute power, and want to make vanity addresses for others.  How do I do it?

The difficulty with this is convincing your customer that, once you provide them with a vanity address, you do not have a copy of their private key.  Some methods of doing this have been discussed on the forum, and vanitygen currently supports one of them.  To generate an address securely, your customer generates a private key, and provides you with the public key part.  You use this public key as part of the address search, and when you find a match, you provide them with a partial private key.  The customer then adds the partial private key to their private key to get the vanity address.  Because the customer never disclosed their part of the private key, only they have access to the complete private key.

There are many ways to get a key pair, but to do address-for-hire, you need the complete public key in hexadecimal format.  The bitcoin address is not sufficient.  One way to generate one and get this is to use the keyconv utility, keyconv -G, and get the following parts:

Code:

$ ./keyconv -G
Pubkey (hex): 041d2e778ae6d9124736df131cd22d3a2483f336c55156d87a84c4bdc6d89f8518e33de85ae0f907a7128c476281bc8cc7742b43a54ccc2c7824dc4c4a438a7fbc
Privkey (hex): 61E00B1C57E7F0D508C7C3795F90C0ACEC1DCAF6A7B82C951D23F728FD53E4BE
Address: 15wRE5VA5uhxs5o6LayZC6imES2SeZeXd4
Privkey: 5JZPftgcsaG5Unp24cf47zP7JZEZkfnSAZzefezAVNRomKHZE8f

The customer saves the privkey part in a secure location, and provides you with the Pubkey (hex) part.

Then, you run vanitygen or oclvanitygen, and specify the customer's public key:

Code:

$ ./vanitygen -P 041d2e778ae6d9124736df131cd22d3a2483f336c55156d87a84c4bdc6d89f8518e33de85ae0f907a7128c476281bc8cc7742b43a54ccc2c7824dc4c4a438a7fbc 1Boat
Difficulty: 4476342
Pattern: 1Boat                                                                 
Address: 1BoatWxEHyVXkjS78d16LMuj8YMdZ1Kce8
PrivkeyPart: 5KCwog8Ndt64ZicNSGoDBRf4vACBptM2GUtSJCmkbqpieC8idcP

Because a public key was specified, vanitygen now provides a PrivkeyPart rather than a Privkey result, which is useful only to your customer.  The customer then takes the partial private key produced by vanitygen and adds it to their private key.  This can be done using ThePiachu's handy website, or using the keyconv utility:

Code:

$ ./keyconv -c 5JZPftgcsaG5Unp24cf47zP7JZEZkfnSAZzefezAVNRomKHZE8f 5KCwog8Ndt64ZicNSGoDBRf4vACBptM2GUtSJCmkbqpieC8idcP
Address: 1BoatWxEHyVXkjS78d16LMuj8YMdZ1Kce8
Privkey: 5J1Jieusaa6vegTQZ7PNG3hMcsM2FjgHPK1BkPjbYyQsWb9k5vj

Here, keyconv is able to recreate the final address found by vanitygen, based on the two private key parts.  It is also able to create the final private key.  This is infeasible for someone who does not have both parts of the private key, and provides your customer with real security.

This process is very complicated.  A simpler way to do it is to use a bounty pool such as vanity pool.

[kingaltcoins]

Can I generate a P2PKH address using vanitygen?

Kindly tell me the step by step process. I'm totally a noob regarding this generator.

[tspacepilot]

Can I generate a P2PKH address using vanitygen?

Kindly tell me the step by step process. I'm totally a noob regarding this generator.

Isn't a P2PKH just a normal address?  the hash of a pubkey?

[shorena]

Can I generate a P2PKH address using vanitygen?

Kindly tell me the step by step process. I'm totally a noob regarding this generator.

Isn't a P2PKH just a normal address?  the hash of a pubkey?

Yes, they are probably refering to P2SH (pay to script hash), starting with 3. I tried it and vanitygen just accepts the value for "3" as prefix, but the result private key will still be seen as version 1 address and not as script by wallets. Its possible though, but I dont know of any fork of vanitygen that can do that.

[AtomSea]

I've looked back many pages but I couldn't find anything.
Has anyone created and compiled a Windows 7 version of Vanitygen that works with AMD 290's?
You'll be my hero if you point me in the right direction

The oclvanitygen offered here should be appropriate for your system. You might need to install OpenCL/AMD Parallel Processing drivers.

I've attempted to use it in the past for newer AMD GPU's with no success.

Have there been code changes?

I can only get it to work with 5xxx & 6xxx GPU's.

Totally got this working not long after this post...
Thanks for the push hexafraction - I updated all my .net applications and got the most current Catalyst Control Center for my two R9 290's.
Rockin' some nice key rates

[helloeverybody]

I've looked back many pages but I couldn't find anything.
Has anyone created and compiled a Windows 7 version of Vanitygen that works with AMD 290's?
You'll be my hero if you point me in the right direction

The oclvanitygen offered here should be appropriate for your system. You might need to install OpenCL/AMD Parallel Processing drivers.

I've attempted to use it in the past for newer AMD GPU's with no success.

Have there been code changes?

I can only get it to work with 5xxx & 6xxx GPU's.

Totally got this working not long after this post...
Thanks for the push hexafraction - I updated all my .net applications and got the most current Catalyst Control Center for my two R9 290's.
Rockin' some nice key rates

What rate are you getting for your 2 290s if you dont mind me asking? Im achieving 37 with my 970. I would expect you to be getting nearly double that?

[xhomerx10]

I've looked back many pages but I couldn't find anything.
Has anyone created and compiled a Windows 7 version of Vanitygen that works with AMD 290's?
You'll be my hero if you point me in the right direction

The oclvanitygen offered here should be appropriate for your system. You might need to install OpenCL/AMD Parallel Processing drivers.

I've attempted to use it in the past for newer AMD GPU's with no success.

Have there been code changes?

I can only get it to work with 5xxx & 6xxx GPU's.

Totally got this working not long after this post...
Thanks for the push hexafraction - I updated all my .net applications and got the most current Catalyst Control Center for my two R9 290's.
Rockin' some nice key rates

What rate are you getting for your 2 290s if you dont mind me asking? Im achieving 37 with my 970. I would expect you to be getting nearly double that?

 I've got a 7970 which is comparable to the R9 290 and I get around 25 MKeys/s so an educated guess would be 52-55 Mkeys/s running a pair.

[helloeverybody]

I've looked back many pages but I couldn't find anything.
Has anyone created and compiled a Windows 7 version of Vanitygen that works with AMD 290's?
You'll be my hero if you point me in the right direction

The oclvanitygen offered here should be appropriate for your system. You might need to install OpenCL/AMD Parallel Processing drivers.

I've attempted to use it in the past for newer AMD GPU's with no success.

Have there been code changes?

I can only get it to work with 5xxx & 6xxx GPU's.

Totally got this working not long after this post...
Thanks for the push hexafraction - I updated all my .net applications and got the most current Catalyst Control Center for my two R9 290's.
Rockin' some nice key rates

What rate are you getting for your 2 290s if you dont mind me asking? Im achieving 37 with my 970. I would expect you to be getting nearly double that?

 I've got a 7970 which is comparable to the R9 290 and I get around 25 MKeys/s so an educated guess would be 52-55 Mkeys/s running a pair.

i managed to overclock my 970 and was getting around 40mkeys/s but somethings happened and ive now dropped down to 35. Managed o hash out a few decent ones but nothing worth mentioning. I think the best ive got is a letter word, Ive got lots of 1111111,19999999 etc.

[AtomSea]

I've looked back many pages but I couldn't find anything.
Has anyone created and compiled a Windows 7 version of Vanitygen that works with AMD 290's?
You'll be my hero if you point me in the right direction

The oclvanitygen offered here should be appropriate for your system. You might need to install OpenCL/AMD Parallel Processing drivers.

I've attempted to use it in the past for newer AMD GPU's with no success.

Have there been code changes?

I can only get it to work with 5xxx & 6xxx GPU's.

Totally got this working not long after this post...
Thanks for the push hexafraction - I updated all my .net applications and got the most current Catalyst Control Center for my two R9 290's.
Rockin' some nice key rates

What rate are you getting for your 2 290s if you dont mind me asking? Im achieving 37 with my 970. I would expect you to be getting nearly double that?

I get about 30ish on one, and around 60ish with two
#party

[Himea]

i just generate 1 address but i dont know how to convert the private key into a notepad ?
what is the command for it ?

[shorena]

i just generate 1 address but i dont know how to convert the private key into a notepad ?

If you use linux you can just drag over the text with the same, as as you would here.

If you use windows you have to make a rightclick and select "mark" (might be a different word).

[Indianacoin]

i managed to overclock my 970 and was getting around 40mkeys/s but somethings happened and ive now dropped down to 35. Managed o hash out a few decent ones but nothing worth mentioning. I think the best ive got is a letter word, Ive got lots of 1111111,19999999 etc.

Wow! Nice speed you got! Can you help me generating one address with 11111 and 99999 prefixes since you got such a massive speed? That would be much helpful

i just generate 1 address but i dont know how to convert the private key into a notepad ?
what is the command for it ?

In Windows OS,



After generating address, right click on command window and click on "mark".




Click and drag to select your keys one by one then hit CTRL+C simultaneously to copy them. Do not right click after selecting because nothing will popup and your selection will get cancelled.

Hope this helps

[Himea]

i managed to overclock my 970 and was getting around 40mkeys/s but somethings happened and ive now dropped down to 35. Managed o hash out a few decent ones but nothing worth mentioning. I think the best ive got is a letter word, Ive got lots of 1111111,19999999 etc.

Wow! Nice speed you got! Can you help me generating one address with 11111 and 99999 prefixes since you got such a massive speed? That would be much helpful

i just generate 1 address but i dont know how to convert the private key into a notepad ?
what is the command for it ?

In Windows OS,



After generating address, right click on command window and click on "mark".




Click and drag to select your keys one by one then hit CTRL+C simultaneously to copy them. Do not right click after selecting because nothing will popup and your selection will get cancelled.

Hope this helps

Thanks, but i mean txt file automated created ?
And after i pm shorena he told me to use -o

So the command i need to use like this

Code:

Vanitygen.exe -v -o output.txt 1Himea

[helloeverybody]

i managed to overclock my 970 and was getting around 40mkeys/s but somethings happened and ive now dropped down to 35. Managed o hash out a few decent ones but nothing worth mentioning. I think the best ive got is a letter word, Ive got lots of 1111111,19999999 etc.

Wow! Nice speed you got! Can you help me generating one address with 11111 and 99999 prefixes since you got such a massive speed? That would be much helpful

i just generate 1 address but i dont know how to convert the private key into a notepad ?
what is the command for it ?

In Windows OS,



After generating address, right click on command window and click on "mark".




Click and drag to select your keys one by one then hit CTRL+C simultaneously to copy them. Do not right click after selecting because nothing will popup and your selection will get cancelled.

Hope this helps

Thanks, but i mean txt file automated created ?
And after i pm shorena he told me to use -o

So the command i need to use like this

Code:

Vanitygen.exe -v -o output.txt 1Himea

I doubt you need verbose output so you can drop the -v, but what might be handy for you is to add -k . Adding the -k will mean the generator will keep generating after youve already found 1 prefix meaning you might find a better one after.

example

Vanitygen.exe -k -o output.txt 1Himea

Also adding -i to remover case sensitivity will give you much quicker results , id also highly recommend using your gpu over cpu if thats an option for you.