lolMiner 1.64: Fastest Kaspa miner in market

[crypto_curious]

lolMiner.... I think you could not figure out the worse name.

[1714031506]

1714031506

[1714031506]

1714031506

[1714031506]

1714031506

[1714031506]

1714031506

[1714031506]

1714031506

[Astrali]

lolMiner.... I think you could not figure out the worse name.

i like the name

[squeekie]

My guess:

1080 --> 200
580  --> 120

 

[winspiral]

lolMiner.... I think you could not figure out the worse name.

i like the name

The name is not the problem...the problem is that my AMD  has not enough power to mine.

[Lolliedieb]

lolMiner.... I think you could not figure out the worse name.

i like the name

As if anybody here give a shit about names xD So many strange names in crypto, but what is important is what is behind. Hands down - who did not raise an eyebrow hearing about the eth enlargement  pill the first time 

My guess:

1080 --> 200
580  --> 120

 

Ok, noted

My guess:

1080 ---> 202
580  ---> 123

 

Did you two talked about that before?

I guess
1080 232 sol/s
580 143 sol/s.
 

At least one of us is optimistic

Hey man how do I enable logging on Alpha so I can paste you my results?

The only thing you need is an empty folder in your miner directory with name "logs". Then you can add the command line option --logs 1 to enable writing a log file. Or use "LOGS" : 1, in config file.

just cause the crash contained a line with "boost"

The boost lib is not the problem here. Thats just because if all cards fail the compatibility check there are a few values not written to an internal configuration table ... and this missing value is causing the bug. That will be fixed in alpha 3

So, from clinfo its indeed that your machine does not find the amdgpu-pro driver and uses the Clover platform only ... and this one does not like my kernel code (yet). I will have to set up a test machine on my own to see why this happens (or you manage to set up the pro-drivers ... lets see who succeeds earlier ^^) 

My 390's rig crashes immediately (BTG 144/5). What is the reason? Is it because of the drivers? I am with crimson 17.7.1 (the last that are supported in windows 8.1).

Good question. I am also running that crimson drivers on my Windows test machine and its running fine there on my 580. Also on an earlier page we had reports about a 390 running well. So, atm no idea why, does this happen at older versions as well?
There are two things that may happen:
1) you run with too extreme OC / UV settings. I have once tried to run lolMiner with the ideal settings for mining eth... that try did not last long... equihash has more compute intense components that require a bit more clock and voltage.
2) One user this morning (in telegram) had the problem that his defender refused to unpack some parts of the .zip. As a result he was mixing and old .exe with new Kernel code. That results in a 0 sol/s immediately.

Hope one of the two answers help you - else this is going to be an interesting debug...

[ivomm]

They are bios undervolted -150mv. I mined without problems equihash (before the fork), ethash, etc. It starts mining and then the driver crashes. I guess the UV is too much...

[kyputejib]

They are bios undervolted -150mv. I mined without problems equihash (before the fork), ethash, etc. It starts mining and then the driver crashes. I guess the UV is too much...

My rig on 6x390 mined without problems 144/5 24/7 with 6alpha2, H/r: 33-36H/s per card
Undevolt GPU customize until the frequency is stable.
Lolly, thank you VM.

[justoiurii]

They are bios undervolted -150mv. I mined without problems equihash (before the fork), ethash, etc. It starts mining and then the driver crashes. I guess the UV is too much...

My rig on 6x390 mined without problems 144/5 24/7 with 6alpha2, H/r: 33-36H/s per card
Undevolt GPU customize until the frequency is stable.
Lolly, thank you VM.

Hi. Could you share you locking afterburner data if you use it? Thanks)

[BigHarryArmsi]

They are bios undervolted -150mv. I mined without problems equihash (before the fork), ethash, etc. It starts mining and then the driver crashes. I guess the UV is too much...

My rig on 6x390 mined without problems 144/5 24/7 with 6alpha2, H/r: 33-36H/s per card
Undevolt GPU customize until the frequency is stable.
Lolly, thank you VM.

Curious what your previous hash rate was and what coin are you on? Thank you

[MaxMidnite]

What will be the best AMD drivers to use in the upcoming Alpha Builds?

[kyputejib]

They are bios undervolted -150mv. I mined without problems equihash (before the fork), ethash, etc. It starts mining and then the driver crashes. I guess the UV is too much...

My rig on 6x390 mined without problems 144/5 24/7 with 6alpha2, H/r: 33-36H/s per card
Undevolt GPU customize until the frequency is stable.
Lolly, thank you VM.

Curious what your previous hash rate was and what coin are you on? Thank you

BTG/BTCZ
1075/1500
18.3.4
on old 0.38 H/r was ~17 per card
on 0.5stable            ~26
on 0.6alpha1/2        ~35
decrease PL until the core frequency in AB starts to swim, after do small increase.

core volt -19 on sapphire
core volt -37 on MSI
PL          -12 on all
stable
PS on undervolt -100mV bios my card very unstable. I use orig bios.

[BigHarryArmsi]

Still struggling to get 6 cards running. 4x470 and 2x580s, all 8gb. In the meantime, running with just 4 cards I keep getting this error before connecting to the pool..."Stratum connection not reacting for too long time", then it connects properly to mine-btcz-na.1ds.us:50063
                                         Subscribed to stratum server

Anyone? Any help is appreciated!

[invizion]

I like being optimistic too  

1080 --> 228
580 --> 139

[mrshaw070]

I'll take a more reserved guess

1080 --> 190
580 --> 116

[Briankbit]

I need to know what algo/coin do I need to use for Pirate Coin? I have run through most of the algo/coin manes i n the manual and AION seems to work but no confirmed hashrate from the pool, others hash but don't report. I am using AMD RX580 cards.

[Lolliedieb]

I need to know what algo/coin do I need to use for Pirate Coin? I have run through most of the algo/coin manes i n the manual and AION seems to work but no confirmed hashrate from the pool, others hash but don't report. I am using AMD RX580 cards.

Atm pirate coin is not supported since that uses Equihash 200/9. If there would be support in future (no idea yet of that will happen), it would be --coin ARRR 

By the way can not resolve the game yet - the code is still wip. Have noticed that some parts that worked well for 144/5  did only partially work for 210/9 - in terms of speed. But can already say both codes got faster then their 0.5 cousins but not yet how much ^^

[Briankbit]

Lollie, thank you for the response. Hopefully this coin will be supported soon.

[joeykolb]

its says:  error: No coin profile find for coin AION how to set up the json file?





************************************************************************************

{
   "DEFAULTS" : {
      "DEVICES" : "AUTO",    
      "APIPORT" : 0
   },

   "EXAMPLE_AION" :
   {
      "COIN" : "AION",
      "POOLS" : [
         {"POOL" : "eu.aionpool.org",
          "PORT" : "9999",
          "USER" : "0xa007bc4b542317d9abca49f754cd6243140b6f3e9ff5eccc9a5e6b9d568a1975.jjzsolti",
          "PASS" : "x"}
      ]
   },

   "EXAMPLE_AION" :
   {
      "COIN" : "AION",
      "SHORTSTATS" : 10,
      "LONGSTATS" : 120,
      "DIGITS" : 2,
      "POOLS" : [
         {"POOL" : "eu.aionpool.org",
          "PORT" : "9999",
          "USER" : "0xa007bc4b542317d9abca49f754cd6243140b6f3e9ff5eccc9a5e6b9d568a1975.jjzsolti",
          "PASS" : "x"},
         {"POOL" : "eu.aionpool.org",
          "PORT" : "9999",
          "USER" : "0xa007bc4b542317d9abca49f754cd6243140b6f3e9ff5eccc9a5e6b9d568a1975.jjzsolti",
          "PASS" : "x"}
      ]
   },   
*******************************************************************************************this s the bat

@echo off

setlocal enableDelayedExpansion

Rem #################################
Rem ## Begin of user-editable part ##
Rem #################################

Rem Insert your configuration file name here
set "PROFILE=EXAMPLE_AION"                              

Rem #################################
Rem ##  End of user-editable part  ##
Rem #################################


set "PARAMS=--profile %PROFILE%"

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

lolMiner.exe !PARAMS!
timeout 10


so? what is the problem here, anyone

[absilon]

Any idea when API support for Awesome Miner will be added?
Would really like to be able to use LolMiner with my Rigs.

[MaxMidnite]

Any news on the next Alpha with AMD support for MNX?