GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[falsealarm_bf1]

Just updated to 1_55 using BeamHash from 1_44. One of my 4x nVidia GPU rigs used to run fine with 2GB on Ubuntu 18.04 with swap but now persistently returns out of memory error for two cards. Is there anything that can be done? Anybody else have this issue?

[Slikkah]

This 1.55 Gminer update seems a great hash improvement over the older one it seems ? ( quite alot on nVidia cards & a little bit on AMD cards )
Our nVidia cards went up more then 25% and AMD's 5%, i reckon those reports are valid ?
Compared to lolminer, etc. Gminer has a leap in front now it seems, nice job!

[jaymillerSR]

hey there.  Did everyone keep the same over/underclock settings as before the algo switch or did you find it better to switch them?  Wondering what a good starting point would be?

[Alubert]

This 1.55 Gminer update seems a great hash improvement over the older one it seems ? ( quite alot on nVidia cards & a little bit on AMD cards )
Our nVidia cards went up more then 25% and AMD's 5%, i reckon those reports are valid ?
Compared to lolminer, etc. Gminer has a leap in front now it seems, nice job!

Can anybody else confirm that?

[Wotan Wipeout]

BeamV2 has got a higher hash and more power consumption. You cant compare it with BeamV1.

Data of some of my rigs:

1070   120 Watt 31-35 Sol
1080   140 Watt 40-41 Sol
1080ti 220 Watt 54-56 Sol
2080   125 Watt 46-48 Sol

Wotan

[Slikkah]

BeamV2 has got a higher hash and more power consumption. You cant compare it with BeamV1.

Data of some of my rigs:

1070   120 Watt 31-35 Sol
1080   140 Watt 40-41 Sol
1080ti 220 Watt 54-56 Sol
2080   125 Watt 46-48 Sol

Wotan

True, i get the same hashes for our 1070 ( upto 35sol @110watt, depends on the card ), also the GTX 1660 ( non-Ti ) are beasts, upto 27sol for like 85w and around 55° stable
Our RX-580 cards get 16sol for 110w ( we dont keep em running btw ), they got replaced by 1660, but tested quickly for sharing here.

Thing is the rewards are not that much more at first sight tough ( tested @ leafpool ; Sparkpool ; 2miners ), ill keep it posted here as we are a bit further the coming days.

[CS1984]

Guys, sorry for maybe dumb question, could you please help me with this error?https://s8.hostingkartinok.com/uploads/images/2019/08/d7a120896e0a1f913d106714f42f7099.jpg
Unknown OpenCL error -61

[falsealarm_bf1]

Just updated to 1_55 using BeamHash from 1_44. One of my 4x nVidia GPU rigs used to run fine with 2GB on Ubuntu 18.04 with swap but now persistently returns out of memory error for two cards. Is there anything that can be done? Anybody else have this issue?

Would increasing swappiness help with this?

[GLUK72]

BeamV2 gminer 1.55

1080 ~ 46-48sol

[falsealarm_bf1]

Just updated to 1_55 using BeamHash from 1_44. One of my 4x nVidia GPU rigs used to run fine with 2GB on Ubuntu 18.04 with swap but now persistently returns out of memory error for two cards. Is there anything that can be done? Anybody else have this issue?

Would increasing swappiness help with this?

Well, let me answer my own question, and the answer is yes.

[SecretRecipe]

I vote that the dev adds memory strap timing option like in claymore

[cryptadawg]

Created a video guide on using Gminer to mine Beam, including copy and paste configs for Windows and Linux Simple Miner smOS mining for anyone interested
https://youtu.be/oYiojyO5MZI
https://i.imgur.com/TkjxQEgl.png

I use SMOS and have 13 gpu's on a couple of my rigs mining Beam. For some reason with the new Gminer version I am only showing 12 gpu's hashing on each rig. All of the gpu's function properly and when I switch over to T Rex on Raven all 13 show up. I have been trying to figure this out, but so far no luck. Anyone using SMOS using  v.155 on Beam experiencing the same problem?

[falsealarm_bf1]

I vote that the dev adds memory strap timing option like in claymore

That would be a great enhancement!

[Kirilldes]

Please fix this.
When mining Grimm(and Beam) coins on HIVEOS, an error occurs(SAPPHIRE Radeon RX 570 Series 4GB: Unknown OpenCL error -61).
Mining Grimm(and Beam) on Windows works properly!

Version 1.54, 1.55 Windows - ok, hiveos - not working.

[JFoxOne]

Unknown OpenCL error -61

That means not enough memory.
Are you using same set-up on both rigs?

[Kirilldes]

Yes, the settings are the same in windows and hiveos.

[ivvi30]

MSI GTX 1060 6GT OCV1 Equihash 192,7 19-22Sol/s https://cdn1.radikalno.ru/uploads/2019/8/18/4fe25dc0237bda73c1e68a32c885b47b-full.jpg

[Zminer777]

GMiner v1.57 available for download

v1.57
+ improved BeamHashII performance on Nvidia cards
+ improved BeamHashII performance on RTX cards

Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta

Download links:
GitHub: https://github.com/develsoftware/GMinerRelease/releases/tag/1.57

[PowerEleven]

OS: SMOS
GPU: NV 1070,1080ti

updated to 1.56 from 1.55, hashrate dropped a little, like 2%.

does anyone else confirm this on SMOS?

[Dr_Victor]

GMiner v1.57 available for download

v1.57
+ improved BeamHashII performance on Nvidia cards
...

I can confirm hash decreasing on gtx 1066 and 1080 ti. Bad job.