s1gs3gv
Legendary
Offline
Activity: 1316
Merit: 1014
ex uno plures
|
|
June 05, 2014, 02:35:31 AM |
|
All I know is that when I touch the bottom of my SP10 it is really, really hot =P
Yeah, cook your breakfast hot. Anybody burned their fingers on this box yet ?
|
|
|
|
Beans
|
|
June 05, 2014, 02:39:37 AM |
|
Hey, I've been unable to get 2 SP10 to hash at 1.4. The highest has always been 1.35. It is running off a 120V and turbo mode has been selected. I have not made any changes or messed around with voltage since I don't want to thermally seize the miner, since I'm remote to it, that would be a bad thing. Are there any SAFE settings I can try in advanced voltage settings to try and get it to 1.4 as advertised?
Thanks.
You're limited by your power. At 120V, that PSU caps at 1100W. 1.35 is the best you're going to see. I was looking into a DS1200 to solve the problem. It looks like it doesn't perform any better on a 120v if I'm reading the specs correctly.
|
|
|
|
Beans
|
|
June 05, 2014, 03:00:11 AM |
|
The noise complaints are numerous. So why doesn't Spondoolies address this issue and make an alternate version in a 2U rack size? I'm sure they would sell more units if they weren't so loud.
I thought my cointerra was obnoxious. Unless you have a room at the far end of your basement, this is not for you. I was really hoping to let it vent out the window. It's just to damn loud.
|
|
|
|
Zelek Uther
|
|
June 05, 2014, 03:11:56 AM |
|
The noise complaints are numerous. So why doesn't Spondoolies address this issue and make an alternate version in a 2U rack size? I'm sure they would sell more units if they weren't so loud.
I thought my cointerra was obnoxious. Unless you have a room at the far end of your basement, this is not for you. I was really hoping to let it vent out the window. It's just to damn loud. My SP10 is in a quiet rack cabinet: http://www.acoustiproducts.com/en/ucoustic_active.aspI can't hear the SP10 at all, even standing next to the cabinet.
|
Run a Bitcoin node, support the network.
|
|
|
merv77
|
|
June 05, 2014, 03:26:35 AM |
|
The noise complaints are numerous. So why doesn't Spondoolies address this issue and make an alternate version in a 2U rack size? I'm sure they would sell more units if they weren't so loud.
I thought my cointerra was obnoxious. Unless you have a room at the far end of your basement, this is not for you. I was really hoping to let it vent out the window. It's just to damn loud. My SP10 is in a quiet rack cabinet: http://www.acoustiproducts.com/en/ucoustic_active.aspI can't hear the SP10 at all, even standing next to the cabinet. Hi Zelek, what size rack are you using? how many SP10's are you running in the Ucoustic rack? how's the rack managing the temperature of the SP10's? are you running the SP10's on 'turbo mode'? Lastly, what's the price of the rack you have? if you don't mind me asking. thanks merv77
|
|
|
|
masonbtc
Newbie
Offline
Activity: 26
Merit: 0
|
|
June 05, 2014, 03:34:07 AM |
|
Any word if the SP30 is going to be as noisy as the SP10?
|
|
|
|
Airwhale
|
|
June 05, 2014, 03:44:20 AM |
|
The noise complaints are numerous. So why doesn't Spondoolies address this issue and make an alternate version in a 2U rack size? I'm sure they would sell more units if they weren't so loud.
I thought my cointerra was obnoxious. Unless you have a room at the far end of your basement, this is not for you. I was really hoping to let it vent out the window. It's just to damn loud. My SP10 is in a quiet rack cabinet: http://www.acoustiproducts.com/en/ucoustic_active.aspI can't hear the SP10 at all, even standing next to the cabinet. Neat! Sadly, the cabinet is about the price of a SP10 itself =(
|
|
|
|
Zelek Uther
|
|
June 05, 2014, 04:22:58 AM Last edit: June 05, 2014, 05:06:38 AM by Zelek Uther |
|
The noise complaints are numerous. So why doesn't Spondoolies address this issue and make an alternate version in a 2U rack size? I'm sure they would sell more units if they weren't so loud.
I thought my cointerra was obnoxious. Unless you have a room at the far end of your basement, this is not for you. I was really hoping to let it vent out the window. It's just to damn loud. My SP10 is in a quiet rack cabinet: http://www.acoustiproducts.com/en/ucoustic_active.aspI can't hear the SP10 at all, even standing next to the cabinet. Hi Zelek, what size rack are you using? how many SP10's are you running in the Ucoustic rack? how's the rack managing the temperature of the SP10's? are you running the SP10's on 'turbo mode'? Lastly, what's the price of the rack you have? if you don't mind me asking. thanks merv77 > what size rack are you using? 24U > how many SP10's are you running in the Ucoustic rack? 1 SP10. Plus an S1, S2, Jupiter, and misc small miners. > how's the rack managing the temperature of the SP10's? Very well. It has an internal temperature sensor which adjusts the fan speed of the cabinet based on the cooling requirement. The cabinet can handle up to 7.2kW of heat. > are you running the SP10's on 'turbo mode'? No, but the rack could handle it. Due to power limitations I'm running the SP10 in normal mode. > Lastly, what's the price of the rack you have? It's expensive. I paid the list price on the web page, plus customs import duty. But where it is located it had to be quiet, discreet, and secure (the cabinet is lockable). It's in an "office" type of environment and I didn't want anyone interfering with my rig.
|
Run a Bitcoin node, support the network.
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
June 05, 2014, 04:57:44 AM |
|
Any word if the SP30 is going to be as noisy as the SP10?
The SP30 will be less noisy. We'll publish it's db level soon.
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
June 05, 2014, 05:04:19 AM |
|
I am actually a bit jealous. LOL That is a great rack. A 42U should handle several miners without not being able to keep up. The noise complaints are numerous. So why doesn't Spondoolies address this issue and make an alternate version in a 2U rack size? I'm sure they would sell more units if they weren't so loud.
I thought my cointerra was obnoxious. Unless you have a room at the far end of your basement, this is not for you. I was really hoping to let it vent out the window. It's just to damn loud. My SP10 is in a quiet rack cabinet: http://www.acoustiproducts.com/en/ucoustic_active.aspI can't hear the SP10 at all, even standing next to the cabinet.
|
|
|
|
merv77
|
|
June 05, 2014, 05:11:13 AM |
|
> what size rack are you using? 24U
> how many SP10's are you running in the Ucoustic rack? 1 SP10. Plus an S1, S2, Jupiter, and misc small miners.
> how's the rack managing the temperature of the SP10's? Very well. It has an internal temperature sensor which adjusts the fan speed of the cabinet based on the cooling requirement. The cabinet can handle up to 7.2kW of heat.
> are you running the SP10's on 'turbo mode'? No, but the rack could handle it. Due to power limitations I'm running the SP10 in normal mode.
> Lastly, what's the price of the rack you have? It's expensive. I paid the list price on the web page, plus customs import duty. But where it is located it had to be quiet, discreet, and secure (the cabinet is lockable). It's in an "office" type of environment and I didn't want anyone interfering with my rig.
thanks for quick reply. if you're willing it would be nice to see some photos of your setup
|
|
|
|
xstr8guy
|
|
June 05, 2014, 05:25:03 AM |
|
I am actually a bit jealous. LOL That is a great rack. A 42U should handle several miners without not being able to keep up. The noise complaints are numerous. So why doesn't Spondoolies address this issue and make an alternate version in a 2U rack size? I'm sure they would sell more units if they weren't so loud.
I thought my cointerra was obnoxious. Unless you have a room at the far end of your basement, this is not for you. I was really hoping to let it vent out the window. It's just to damn loud. My SP10 is in a quiet rack cabinet: http://www.acoustiproducts.com/en/ucoustic_active.aspI can't hear the SP10 at all, even standing next to the cabinet. I'd like to add myself to the envy parade! It is indeed a gorgeous cabinet. I wish I had invested in that cabinet instead of BFL Monarchs, lol. My other purchases have turned out well, even the FrankenJups. But I'm afraid "preordered from BFL" will be on my tombstone.
|
|
|
|
Zelek Uther
|
|
June 05, 2014, 05:41:18 AM |
|
> what size rack are you using? 24U
> how many SP10's are you running in the Ucoustic rack? 1 SP10. Plus an S1, S2, Jupiter, and misc small miners.
> how's the rack managing the temperature of the SP10's? Very well. It has an internal temperature sensor which adjusts the fan speed of the cabinet based on the cooling requirement. The cabinet can handle up to 7.2kW of heat.
> are you running the SP10's on 'turbo mode'? No, but the rack could handle it. Due to power limitations I'm running the SP10 in normal mode.
> Lastly, what's the price of the rack you have? It's expensive. I paid the list price on the web page, plus customs import duty. But where it is located it had to be quiet, discreet, and secure (the cabinet is lockable). It's in an "office" type of environment and I didn't want anyone interfering with my rig.
thanks for quick reply. if you're willing it would be nice to see some photos of your setup Sure, I'll try to go in there on Sunday to take a video. It's quite spectacular hearing the noise then closing the front doors with a slight thunk then... silence.
|
Run a Bitcoin node, support the network.
|
|
|
gurki
Member
Offline
Activity: 102
Merit: 10
|
|
June 05, 2014, 05:49:24 AM |
|
The noise complaints are numerous. So why doesn't Spondoolies address this issue and make an alternate version in a 2U rack size? I'm sure they would sell more units if they weren't so loud.
I thought my cointerra was obnoxious. Unless you have a room at the far end of your basement, this is not for you. I was really hoping to let it vent out the window. It's just to damn loud. My SP10 is in a quiet rack cabinet: http://www.acoustiproducts.com/en/ucoustic_active.aspI can't hear the SP10 at all, even standing next to the cabinet. How do you keep the miners cool Zelek, is it located in a room with a powerful a/c?
|
|
|
|
Zelek Uther
|
|
June 05, 2014, 05:53:03 AM |
|
I am actually a bit jealous. LOL That is a great rack. A 42U should handle several miners without not being able to keep up. The noise complaints are numerous. So why doesn't Spondoolies address this issue and make an alternate version in a 2U rack size? I'm sure they would sell more units if they weren't so loud.
I thought my cointerra was obnoxious. Unless you have a room at the far end of your basement, this is not for you. I was really hoping to let it vent out the window. It's just to damn loud. My SP10 is in a quiet rack cabinet: http://www.acoustiproducts.com/en/ucoustic_active.aspI can't hear the SP10 at all, even standing next to the cabinet. I'd like to add myself to the envy parade! It is indeed a gorgeous cabinet. I wish I had invested in that cabinet instead of BFL Monarchs, lol. My other purchases have turned out well, even the FrankenJups. But I'm afraid "preordered from BFL" will be on my tombstone. Thanks, that makes me feel better! I threw about $10k at BFL (3 Singles) which went horribly for me (got them six months later, meantime difficulty shot to hell), and hurled $13k at Bitmine (2TH/s Rig) which has earned me heartache, no miner (they still haven't shipped a Rig, I paid in Oct 2013), and still no refund. So at least my Rack Cabinet, arrived and operates perfectly, and will continue to function usefully...and I'm all set to run Spondoolies gear, the kind of professional server-grade miners I have been waiting for!
|
Run a Bitcoin node, support the network.
|
|
|
raskul
|
|
June 05, 2014, 05:58:24 AM |
|
I am actually a bit jealous. LOL That is a great rack. A 42U should handle several miners without not being able to keep up. The noise complaints are numerous. So why doesn't Spondoolies address this issue and make an alternate version in a 2U rack size? I'm sure they would sell more units if they weren't so loud.
I thought my cointerra was obnoxious. Unless you have a room at the far end of your basement, this is not for you. I was really hoping to let it vent out the window. It's just to damn loud. My SP10 is in a quiet rack cabinet: http://www.acoustiproducts.com/en/ucoustic_active.aspI can't hear the SP10 at all, even standing next to the cabinet. I'd like to add myself to the envy parade! It is indeed a gorgeous cabinet. I wish I had invested in that cabinet instead of BFL Monarchs, lol. My other purchases have turned out well, even the FrankenJups. But I'm afraid "preordered from BFL" will be on my tombstone. Thanks, that makes me feel better! I threw about $10k at BFL (3 Singles) which went horribly for me (got them six months later, meantime difficulty shot to hell), and hurled $13k at Bitmine (2TH/s Rig) which has earned me heartache, no miner (they still haven't shipped a Rig, I paid in Oct 2013), and still no refund. So at least my Rack Cabinet, arrived and operates perfectly, and will continue to function usefully...and I'm all set to run Spondoolies gear, the kind of professional server-grade miners I have been waiting for! i'm with you on that, unfortunately I bought a cabinet that doesn't quieten things at all, but on the upside, it's 5degrees C cooler in my old mums garage than it is in my spare room
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
Zelek Uther
|
|
June 05, 2014, 06:03:44 AM |
|
The noise complaints are numerous. So why doesn't Spondoolies address this issue and make an alternate version in a 2U rack size? I'm sure they would sell more units if they weren't so loud.
I thought my cointerra was obnoxious. Unless you have a room at the far end of your basement, this is not for you. I was really hoping to let it vent out the window. It's just to damn loud. My SP10 is in a quiet rack cabinet: http://www.acoustiproducts.com/en/ucoustic_active.aspI can't hear the SP10 at all, even standing next to the cabinet. How do you keep the miners cool Zelek, is it located in a room with a powerful a/c? That cabinet is in a corporate atrium which is air conditioned. Due to power constraints at that location I only run about 3kW in it. My new cabinet is in my basement, and the cabinet vents out a 150mm hole through the wall. It will be cooled solely with ambient air. It can handle 7.2kW max load. It will house 1 SP10 and 2 SP30s come August... my little Spondoolies room.
|
Run a Bitcoin node, support the network.
|
|
|
gurki
Member
Offline
Activity: 102
Merit: 10
|
|
June 05, 2014, 06:29:11 AM |
|
The noise complaints are numerous. So why doesn't Spondoolies address this issue and make an alternate version in a 2U rack size? I'm sure they would sell more units if they weren't so loud.
I thought my cointerra was obnoxious. Unless you have a room at the far end of your basement, this is not for you. I was really hoping to let it vent out the window. It's just to damn loud. My SP10 is in a quiet rack cabinet: http://www.acoustiproducts.com/en/ucoustic_active.aspI can't hear the SP10 at all, even standing next to the cabinet. How do you keep the miners cool Zelek, is it located in a room with a powerful a/c? That cabinet is in a corporate atrium which is air conditioned. Due to power constraints at that location I only run about 3kW in it. My new cabinet is in my basement, and the cabinet vents out a 150mm hole through the wall. It will be cooled solely with ambient air. It can handle 7.2kW max load. It will house 1 SP10 and 2 SP30s come August... my little Spondoolies room. Nice! This envy parade is getting longer.
|
|
|
|
gyntas
Newbie
Offline
Activity: 31
Merit: 0
|
|
June 05, 2014, 07:19:33 AM |
|
Hey, I've been unable to get 2 SP10 to hash at 1.4. The highest has always been 1.35. It is running off a 120V and turbo mode has been selected. I have not made any changes or messed around with voltage since I don't want to thermally seize the miner, since I'm remote to it, that would be a bad thing. Are there any SAFE settings I can try in advanced voltage settings to try and get it to 1.4 as advertised?
Thanks.
You're limited by your power. At 120V, that PSU caps at 1100W. 1.35 is the best you're going to see. I run on 240v, fans on 50% ,i got 1.4 TH/s.
|
|
|
|
bkpduke
|
|
June 05, 2014, 12:21:22 PM |
|
Spondoolies - got miners today and they are simply brilliant. Thanks a ton.
One question, what are the best settings in terms of difficutly level, etc.? I ask b/c I am seeing between 6-11% of errors on the shares mined.
Cheers.
I think that 1024 should be ok. Give it a bit of time because usually errors are high at start but they level down in a couple of hours. They have dropped a little bit, down to 4-6.5% in the past 24 hours.
|
|
|
|
|