Swedish ASIC miner company kncminer.com

Quote from: Phoenix1969 on November 15, 2013, 05:33:04 PM

Quote from: bronan on November 15, 2013, 03:29:59 PM

why the hell choose any brand for a psu, any good psu will do
i personally buy anything with good stats corsair, ocz, antec you just need to check how the psu is build and how much they actually can deliver on the lanes they have
I have my small antec quattro here which delivers 6 rails with each capable of feeding 30 amp max and 170 max on the 3.3=5 volts rail.
This psu has one major drawback however because it has no power on/off switch.
But in general this monster has no had no problem feeding my 4 gpu system at all.

It got a robot psu switch and i am very happy with that solution

My question is what is going to happen with the upgrade modules are they now also on hold
And what does this it mean for the delivery of the upgrade modules effectively
As i read that it seems the building of the november orders miners seem to go first and as i understood it the upgrade modules are being send when the orders are finished on the miners.
Would that mean another month of waiting or ?

I have posted alot of questions towards knc but the time it takes to get an answer is insane long, i think the communication towards the community has to pick up some pace.
Its easy for them to prevent many emails and phone calls if they communicate onto the forums.
but as of yet on non of the actual communcations i see any of the knc people actually post at all besides the initial posts from sam cole.

Its so simple to add some information when you are going to sell a product, so people do not NEED to ask whats included
I do not wanna see a post from some forum member and to be honest alot of them are on my ignore list.

I want to see relevant information which make us clear what is going on.
Everytime they post something instant many questions pop up which should not be needed if the info was more clear towards us customers.

Again this is not a rant but a real concern, knc would have less a problem with people calling and sending emails if the info was not all the time in crypto language.

I took almost 3 weeks to get an answer from knc and what was said as a answer was not even an answer at all on my questions

Mark my words....... a six rail psu will not work! Use single rail only!

Guessing but you might have to find a way to tie the grounds together if it doesn't work out of the box. I was surprised when I found that the 12v and ground was not common with the 12v and ground on the controller/BBB even tho there is the ribbon cable. That's within the machine. I had tried just bringing 12v from the module power to the 4 pin molex along with 5v and ground from a BBB wall wart - you see the assumption the ground as common via the ribbon. Sure wasn't. Now if your supply has separate grounds for the separate rails you could find the module not communicating as it doesn't have common ground.