PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[robminer80]

Been using this miner for like 6 hours now and it's amazing. 4-5 MH/s more than Claymore, which is great!

But I'm having this weird problem right now, I have 2x RX560's which are getting 14.7 MH/s each, but every ~10 seconds they both drop to ~12 MH/s for 2 seconds and then it goes back to 14.7 MH/s. My RX580's are not doing this and are keeping strong on the 30.5 MH/s mark. With Claymore I do not have this issue, I also tested this with Ethminer and the RX560's do not drop in hashrate at all.

Would be great if you could get that fixed somehow, other than that, this miner simply amazes me, keep up the good work!

Same here,wait for fix.

Please pay attention to this, 2.6 goes worse...

[newmz]

To all you miners using Nvidia GPUs - especially 1060s, try this miner:

https://github.com/ethereum-mining/ethminer/releases

It does better (for me) than Claymore and has NO FEE.

For 1060 6GB I use afterburner and set powerlimit to 65%, core to -200 and memory to +700, I get 23-24mh/s out of all my 1060 6GB except one ASUS which wont overclock memory past around +300, that one does 22mh/s

[Lunga Chung]

What am i doing wrong

timeout 30
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
timeout 10

PhoenixMiner.exe -pool coinotron.com:3344 -wal username.rig1 -pass x

I just keep getting

GPU1: 49C 0%, GPU2: 47C 0%, GPU3: 48C 0%, GPU4: 48C 0%, GPU5: 50C 0%, GPU6: 46C 0%
Waiting for job from the pool
Waiting for job from the pool
Waiting for job from the pool
Waiting for job from the pool
Waiting for job from the pool
GPU1: 51C 0%, GPU2: 49C 0%, GPU3: 51C 0%, GPU4: 50C 0%, GPU5: 53C 0%, GPU6: 49C 0%
Waiting for job from the pool
Waiting for job from the pool
Waiting for job from the pool
Waiting for job from the pool
Waiting for job from the pool
Waiting for job from the pool
GPU1: 51C 21%, GPU2: 51C 0%, GPU3: 50C 21%, GPU4: 52C 0%, GPU5: 49C 19%, GPU6: 51C 0%
Waiting for job from the pool
Waiting for job from the pool
Waiting for job from the pool

for the last 30 minutes....

[SuperDerpBro]

Does it not respect the -ethi argument? I run 2 on my main pc so i can barely tell it is running (Claymore). I can "feel" Phoenix running in the back ground at the same setting.

[gsrcrxsi314]

I forgot to ask- what version are you running? I tried 2.4, 2.5 and 2.6B. I was having the best luck on 2.4 but all 3 do the DEVFEE issue for me unfortunately. I tried 2.6 today thinking it might not happen but it did

2.5d

10hrs isnt enough.

i get no devfee errors. been running about 3 days straight at this point. on an 8GPU rig making 228MH/s

try adding "-coin eth" to your startup bat file

is there any power difference in your previous miner and phoenix miner?

yes. Phoenix uses about 10-20 more watts than Claymore

[PhoenixMiner]

What am i doing wrong

timeout 30
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
timeout 10

PhoenixMiner.exe -pool coinotron.com:3344 -wal username.rig1 -pass x

I just keep getting

GPU1: 49C 0%, GPU2: 47C 0%, GPU3: 48C 0%, GPU4: 48C 0%, GPU5: 50C 0%, GPU6: 46C 0%
Waiting for job from the pool

  You must add -proto 1 to the command line for coinotron.com as shown in the first post of this thread:

Code:

PhoenixMiner.exe -pool coinotron.com:3344 -wal YourLoginName.WorkerName -pass x -proto 1

Does it not respect the -ethi argument? I run 2 on my main pc so i can barely tell it is running (Claymore). I can "feel" Phoenix running in the back ground at the same setting.

  -ethi is supported and works roughly the same is in Claymore. You can try replacing -ethi 0 with -mi 0, which lowers the GPU load even more. The possible values of -mi (mining intensity) are from 0 to 12, where 10 is the default. Try the low values and see which one is best for your use case.

[peterboy1]

what do you mean by most claymore's params work? i cant even control fans in this nor voltages and clocks.

will you implement it in the future?

[peterboy1]

what does gpu tuning parameter actually do?

[cidman]

very happy with this after a few days
all my rigs are much more stable, hitting higher rates, able to mine ubiq at full speed without crashing, lower wattages (not really sure how ppl are getting higher wattages than claymore at the same rates), less stales, and lower dev fee for a miner thats still being developed
only one thing more i can ask and thats a way to lower intensity a bit further
sometimes i play casual games and wanna run more 50%
the mi only drops it down about 30-40%
on claymore hes got a low intensity mode and the ethi
i can get nice combos with these types of settings
or maybe its possible to make mi go into the negatives?

[DrLexer]

Any news about linux version?

[Teress]

Hi developers. Great job. I have a wish. I love you print all infos in the console, but for better reading it, couuld you please make a sumarization info in some rectangle or divided by the line of "*" symbols? I mean something like this:

Eth: Mining Pirl on eu.pirlpool.eu:8002
Eth speed: 138.635 MH/s, shares: 3/0/0, time: 0:00
GPUs: 1: 24.949 MH/s (0) 2: 24.950 MH/s (0) 3: 25.073 MH/s (1) 4: 24.952 MH/s (2) 5: 19.359 MH/s (0) 6: 19.351 MH/s (0)
Eth: Mining Pirl on eu.pirlpool.eu:8002
Eth speed: 138.635 MH/s, shares: 3/0/0, time: 0:00
GPUs: 1: 24.949 MH/s (0) 2: 24.950 MH/s (0) 3: 25.073 MH/s (1) 4: 24.952 MH/s (2) 5: 19.359 MH/s (0) 6: 19.351 MH/s (0)

***************************************************************
Eth: Accepted shares 3 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 71.9 GH (!)
Eth: Average speed (5 min): 138.129 MH/s
***************************************************************

Eth: Mining Pirl on eu.pirlpool.eu:8002
Eth speed: 138.635 MH/s, shares: 3/0/0, time: 0:00
GPUs: 1: 24.949 MH/s (0) 2: 24.950 MH/s (0) 3: 25.073 MH/s (1) 4: 24.952 MH/s (2) 5: 19.359 MH/s (0) 6: 19.351 MH/s (0)
Eth: Mining Pirl on eu.pirlpool.eu:8002
Eth speed: 138.635 MH/s, shares: 3/0/0, time: 0:00
GPUs: 1: 24.949 MH/s (0) 2: 24.950 MH/s (0) 3: 25.073 MH/s (1) 4: 24.952 MH/s (2) 5: 19.359 MH/s (0) 6: 19.351 MH/s (0)
Eth: Mining Pirl on eu.pirlpool.eu:8002
Eth speed: 138.635 MH/s, shares: 3/0/0, time: 0:00
GPUs: 1: 24.949 MH/s (0) 2: 24.950 MH/s (0) 3: 25.073 MH/s (1) 4: 24.952 MH/s (2) 5: 19.359 MH/s (0) 6: 19.351 MH/s (0)

[SuperDerpBro]

Does it not respect the -ethi argument? I run 2 on my main pc so i can barely tell it is running (Claymore). I can "feel" Phoenix running in the back ground at the same setting.

  -ethi is supported and works roughly the same is in Claymore. You can try replacing -ethi 0 with -mi 0, which lowers the GPU load even more. The possible values of -mi (mining intensity) are from 0 to 12, where 10 is the default. Try the low values and see which one is best for your use case.

Nice! -mi 2 works great and faster than -ethi 2 claymore

[akuci]

Hi developers. Great job. I have a wish. I love you print all infos in the console, but for better reading it, couuld you please make a sumarization info in some rectangle or divided by the line of "*" symbols? I mean something like this:

Eth: Mining Pirl on eu.pirlpool.eu:8002
Eth speed: 138.635 MH/s, shares: 3/0/0, time: 0:00
GPUs: 1: 24.949 MH/s (0) 2: 24.950 MH/s (0) 3: 25.073 MH/s (1) 4: 24.952 MH/s (2) 5: 19.359 MH/s (0) 6: 19.351 MH/s (0)
Eth: Mining Pirl on eu.pirlpool.eu:8002
Eth speed: 138.635 MH/s, shares: 3/0/0, time: 0:00
GPUs: 1: 24.949 MH/s (0) 2: 24.950 MH/s (0) 3: 25.073 MH/s (1) 4: 24.952 MH/s (2) 5: 19.359 MH/s (0) 6: 19.351 MH/s (0)

***************************************************************
Eth: Accepted shares 3 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 71.9 GH (!)
Eth: Average speed (5 min): 138.129 MH/s
***************************************************************

Eth: Mining Pirl on eu.pirlpool.eu:8002
Eth speed: 138.635 MH/s, shares: 3/0/0, time: 0:00
GPUs: 1: 24.949 MH/s (0) 2: 24.950 MH/s (0) 3: 25.073 MH/s (1) 4: 24.952 MH/s (2) 5: 19.359 MH/s (0) 6: 19.351 MH/s (0)
Eth: Mining Pirl on eu.pirlpool.eu:8002
Eth speed: 138.635 MH/s, shares: 3/0/0, time: 0:00
GPUs: 1: 24.949 MH/s (0) 2: 24.950 MH/s (0) 3: 25.073 MH/s (1) 4: 24.952 MH/s (2) 5: 19.359 MH/s (0) 6: 19.351 MH/s (0)
Eth: Mining Pirl on eu.pirlpool.eu:8002
Eth speed: 138.635 MH/s, shares: 3/0/0, time: 0:00
GPUs: 1: 24.949 MH/s (0) 2: 24.950 MH/s (0) 3: 25.073 MH/s (1) 4: 24.952 MH/s (2) 5: 19.359 MH/s (0) 6: 19.351 MH/s (0)

+1 for this. Dev please notice us.

[Rewqpro]

BTW, I am sorry if this question already has been arised, but what is hashrate for FUry X GPUs?

[mshordja]

any news about dual miner?

[Lebaaaron]

BTW, I am sorry if this question already has been arised, but what is hashrate for FUry X GPUs?

my nano does 29

[StarLordRammi]

how do i add my email to this for nanopool?

Code:

nanopool.org (ETH):
  PhoenixMiner.exe -pool eu1.nanopool.org:9999 -wal YourEthWalletAddress/WorkerName -pass x

thank you

[Teress]

how do i add my email to this for nanopool?

Code:

nanopool.org (ETH):
  PhoenixMiner.exe -pool eu1.nanopool.org:9999 -wal YourEthWalletAddress/WorkerName -pass x

thank you

-wal YourEthWalletAddress/WorkerName/Your@email.address

[Aurren]

getting this error randomly I've noticed.  Connection should be good.

17567:15:27:02.584: eths Eth: Share actual difficulty: 4199 MH
17567:15:27:04.155: main Eth speed: 199.508 MH/s, shares: 30/1/0, time: 0:12
17567:15:27:04.155: main GPUs: 1: 24.974 MH/s (4) 2: 24.886 MH/s (7) 3: 25.384 MH/s (6) 4: 24.972 MH/s (5) 5: 24.927 MH/s (0) 6: 24.411 MH/s (0) 7: 24.986 MH/s ( 8: 24.968 MH/s (1)
17567:15:27:05.798: eths Eth: Unable to read pool response: An existing connection was forcibly closed by the remote host
17567:15:27:05.798: eths Eth: Reconnecting in 20 seconds...
17567:15:27:13.103: GPU2 Unable to submit share - pool disconnected
17567:15:27:13.133: main GPU1: 62C 40%, GPU2: 61C 34%, GPU3: 62C 39%, GPU4: 61C 38%, GPU5: 62C 36%, GPU6: 64C 47%, GPU7: 60C 33%, GPU8: 62C 40%
17567:15:27:25.804: unkn Eth: Connecting to ethash pool us2.ethermine.org:4444

[a0908242272]

How mining with pool http://soil.miners-zone.net.

: GPU4: Radeon (TM) RX 470 Graphics (pcie 5), OpenCL 2.0, 4 GB VRAM, 32 CUs
GPU5: Radeon (TM) RX 470 Graphics (pcie 6), OpenCL 2.0, 4 GB VRAM, 32 CUs
GPU6: Radeon (TM) RX 470 Graphics (pcie 7), OpenCL 2.0, 4 GB VRAM, 32 CUs
Listening for CDM remote manager at port 3333 in read-only mode
Eth: the pool list contains 3 pools
Eth: primary pool: soil.miners-zone.net:28008
Eth: Connecting to ethash pool soil.miners-zone.net:28008
Eth: Connected to ethash pool soil.miners-zone.net:28008 (37.120.184.125)
Eth: Starting GPU mining
Eth: Subscribed to ethash pool
Eth: Connection closed by the pool
Eth: Reconnecting in 20 seconds...