SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[reaper7881]

miner still says 1.2.1 when you run it in

[1714191228]

1714191228

[Pennywis3]

Ok, tested 1.2.2

It starts good, but every 3-4 min it restarts.
Tried different settings with low intensity to no avail.

The same error as 1.1.x version:

Faulting application name: SRBMiner-CN.exe, version: 1.2.1.0, time stamp: 0x00000000
Faulting module name: SRBMiner-CN.exe, version: 1.2.1.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x000000000002b717
Faulting process id: 0x2d4

I guess there's something wrong/different with my rigs, ran out of ideas, other miners work normal.

[proffe14]

V1.2.2

When there will be a miner for 570-580, to use 2 threads, and then on one thread 700-760 hash?

[ALEX_RAA]

Not sure about Baffin, but I will test it

it perfectly work with rx560, my rx560 4gb Gigabyte gives 255h/s+254h/s (over 500 in summ) in double_thread mode

[d2bg]

V1.2.2
- Fixed bug for CPU's without AES-NI
- Added resources cleanup and freeing on miner shutdown

@ALEX_RAA & @Pennywis3 try it now please and report

Very small note, but the version in cmd is still showing as 1.2.1.

I wasn't experiencing any bugs related to cpu before, but I'm getting a warning for not having one with AES-NI now. Hopefully a good sign.

[4ward]

Can you add API to the miner?

[skablast]

Spoke too soon...

1.2.2

Rx 580, with intensity set at 124 ( but it was 0 in the config) working

Rx 580, with intensity set at 121/122/123/124 ( but selected by gpu)  NOT working ( I was trying to find a better one)

I triple check the sintax, there is no parsing problem, it simply give no hashing.

[micax1]

did anyone tested on nicehash monero v7? i am getting 100% rejects with "shareabovetarget" error

Add:
It seems like nicehash has some problems with this algo. accepted rate is now about 50%


however here what i get from miner:
[2018-04-05 19:10:10] ERROR : PARSE error: Unknown server method mining.set_extranonce

any workaround?

[ragecage]

great work. 1.2.2 works fine.

[doktor83]

did anyone tested on nicehash monero v7? i am getting 100% rejects with "shareabovetarget" error

Add:
It seems like nicehash has some problems with this algo. accepted rate is now about 50%


however here what i get from miner:
[2018-04-05 19:10:10] ERROR : PARSE error: Unknown server method mining.set_extranonce

any workaround?

something ain't right there cause when i set the pool to cryptonightv7.eu.nicehash.com:3363 and try normal type it accepts shares and it works
When changing to v7, share is above target.. so yeah, something probably bad at their side.

[doktor83]

Spoke too soon...

1.2.2

Rx 580, with intensity set at 124 ( but it was 0 in the config) working

Rx 580, with intensity set at 121/122/123/124 ( but selected by gpu)  NOT working ( I was trying to find a better one)

I triple check the sintax, there is no parsing problem, it simply give no hashing.

do you get 0 hashing speed and then it restarts the miner or ?
also which algo type?

[Luci0gabsan]

I'm testing the miner on stellite pool but no luck... XMR-stak last version is working I get 1250khs  2X RX570
using SRBMiner I get only a thread running even if I set true on double switch on true. I'have a G1840  CPU

On a FX8320E and two RX560 ... i get 325 h/s for GPU  using xmr-stak ... I can't have a working script on SRBMiner !

So I stop testing!
I've tested even on old pool using "normal" algo ...  nothing to do it doesn't work!

[doktor83]

I'm testing the miner on stellite pool but no luck... XMR-stak last version is working I get 1250khs  2X RX570
using SRBMiner I get only a thread running even if I set true on double switch on true. I'have a G1840  CPU

On a FX8320E and two RX560 ... i get 325 h/s for GPU  using xmr-stak ... I can't have a working script on SRBMiner !

So I stop testing!
I've tested even on old pool using "normal" algo ...  nothing to do it doesn't work!

if you use the latest v1.2.2 and this conf (stellite test pool):

{
"cryptonight_type" : "normalv7",
"intensity" : 0,
"double_threads" : true,
"target_temperature" : 0,
"pool_use_tls" : false,
"pool" : "148.251.154.104:53811",
"wallet" : "Se321oJNkfaGrN89Vmq6qGZb8587L53u2NVZbCrhhJujemaGMVNmr952oEsQAKGFojevSWDNcJK8GS8 Sy4manyrG2okoPyvfa",
"password" : "x",
"location" : "europe",
"log_file" : "",
}

it has to work.

[momodigital]

using the V1.2.2 :


---------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.2.1                       <<< still 1.2.1 but the zip was 1.2.2
DevFee 1 minute every 2 hours (~ 0.85%)
Press 's' to get some stats
Press 'h' to get some hashrate
Give it a few minutes to reach maximum hashrate
---------------------------------------------------------

Please wait...

Cryptonight mode enabled

[2018-04-06 02:24:29] Heating up system, please wait...



why too many stale share and the miner always restart mining?

[skablast]

Rx 580 rig is mining monero at nanopool.Speed is only 740/card, lol, I've got 890/card with XMR stak 64.

when intensity is set at 0, the sw suggest an intensity of 124.
SO, I tried 121,122,123, etc to see the best intensity near it and to do so, I edit the gpuconf section
I've got 0 hashing speed on all threads, all the card.
I waited till all the screen became red. and then I stopped,

Reboot, intensity at 0, and it goes

changed to single gpu intensity, all red.

Reboot, all stock, the same thing.

thenI deleted all the *.srb

Reboot and  its the same.

First I tried at 0, then singles intensity and it doesn't work.

Last try I can do is : erase the *.srb, put everything stock, reboot, set intensity single and then launch WITHOUT launching intensity 0 first.

May be its trying to use the same *.srb (bin) just compiled for that intensity. I don't know
Later tonight I will try again

[annapotpot]

I am mining sumokoin and I am getting a lot of stale shares. Is this normal?

Rig is running Rx580 and RX480 cards.

Code:

[2018-04-06 02:31:04] Pool accepted result 0x00153E20 ( STALE )
[2018-04-06 02:31:04] Pool accepted result 0x0007CF5D ( STALE )
[2018-04-06 02:31:05] Pool accepted result 0x000F6E88 ( STALE )
[2018-04-06 02:31:05] Pool accepted result 0x001E821A ( STALE )
[2018-04-06 02:31:05] Pool accepted result 0x00046013 ( STALE )
[2018-04-06 02:31:06] Pool accepted result 0x001E8B0A ( STALE )
[2018-04-06 02:31:06] Pool accepted result 0x0001724C ( STALE )
[2018-04-06 02:31:07] Pool accepted result 0x000484FC ( STALE )
[2018-04-06 02:31:07] Pool accepted result 0x001507DC ( STALE )
[2018-04-06 02:31:08] Pool accepted result 0x0017D419 ( STALE )
[2018-04-06 02:31:08] Pool accepted result 0x001588C2 ( STALE )
[2018-04-06 02:31:09] Pool accepted result 0x000FC691 ( STALE )
[2018-04-06 02:31:09] Pool accepted result 0x000C7269 ( STALE )
[2018-04-06 02:31:10] Pool accepted result 0x0000AF8F ( STALE )
[2018-04-06 02:31:10] Pool accepted result 0x00000357 ( STALE )
[2018-04-06 02:31:10] Pool accepted result 0x0006D0CA ( STALE )
[2018-04-06 02:31:11] Pool accepted result 0x001D3E60 ( STALE )
[2018-04-06 02:31:12] Pool accepted result 0x0012FE82 ( STALE )
[2018-04-06 02:31:12] Pool accepted result 0x000A6D0F ( STALE )
[2018-04-06 02:31:13] Pool accepted result 0x0002C7B9 ( STALE )
[2018-04-06 02:31:13] Pool accepted result 0x0017F22F ( STALE )
[2018-04-06 02:31:14] Pool accepted result 0x0000F7E5
[2018-04-06 02:31:14] Pool accepted result 0x0004959F
[2018-04-06 02:31:15] Pool accepted result 0x001D970D ( STALE )
[2018-04-06 02:31:15] Pool accepted result 0x00051FEB
[2018-04-06 02:31:15] Pool difficulty: 22029
[2018-04-06 02:31:15] Pool sent a new job (ID: d5be)
[2018-04-06 02:31:16] Pool accepted result 0x00076367 ( STALE )
[2018-04-06 02:31:16] Pool accepted result 0x000856D2 ( STALE )
[2018-04-06 02:31:17] Pool accepted result 0x00082D0D ( STALE )
[2018-04-06 02:31:17] Pool accepted result 0x0000CB8F ( STALE )
[2018-04-06 02:31:21] Pool difficulty: 74383
[2018-04-06 02:31:21] Pool sent a new job (ID: d5b9)
[2018-04-06 02:31:21] Pool accepted result 0x000023DC ( STALE )
[2018-04-06 02:31:22] Pool accepted result 0x0002E9C4 ( STALE )
[2018-04-06 02:32:02] Pool accepted result 0x0000CD7D

Edit: it looks like it only happens on the first few minutes. The pool is probably adjusting  difficulty.

So far so good. Better hashrate than xmr-stak currently. I am getting 100H/s more on my cards than xmr-stak.

[doktor83]

I am mining sumokoin and I am getting a lot of stale shares. Is this normal?

Rig is running Rx580 and RX480 cards.

Code:

[2018-04-06 02:31:04] Pool accepted result 0x00153E20 ( STALE )
[2018-04-06 02:31:04] Pool accepted result 0x0007CF5D ( STALE )
[2018-04-06 02:31:05] Pool accepted result 0x000F6E88 ( STALE )
[2018-04-06 02:31:05] Pool accepted result 0x001E821A ( STALE )
[2018-04-06 02:31:05] Pool accepted result 0x00046013 ( STALE )
[2018-04-06 02:31:06] Pool accepted result 0x001E8B0A ( STALE )
[2018-04-06 02:31:06] Pool accepted result 0x0001724C ( STALE )
[2018-04-06 02:31:07] Pool accepted result 0x000484FC ( STALE )
[2018-04-06 02:31:07] Pool accepted result 0x001507DC ( STALE )
[2018-04-06 02:31:08] Pool accepted result 0x0017D419 ( STALE )
[2018-04-06 02:31:08] Pool accepted result 0x001588C2 ( STALE )
[2018-04-06 02:31:09] Pool accepted result 0x000FC691 ( STALE )
[2018-04-06 02:31:09] Pool accepted result 0x000C7269 ( STALE )
[2018-04-06 02:31:10] Pool accepted result 0x0000AF8F ( STALE )
[2018-04-06 02:31:10] Pool accepted result 0x00000357 ( STALE )
[2018-04-06 02:31:10] Pool accepted result 0x0006D0CA ( STALE )
[2018-04-06 02:31:11] Pool accepted result 0x001D3E60 ( STALE )
[2018-04-06 02:31:12] Pool accepted result 0x0012FE82 ( STALE )
[2018-04-06 02:31:12] Pool accepted result 0x000A6D0F ( STALE )
[2018-04-06 02:31:13] Pool accepted result 0x0002C7B9 ( STALE )
[2018-04-06 02:31:13] Pool accepted result 0x0017F22F ( STALE )
[2018-04-06 02:31:14] Pool accepted result 0x0000F7E5
[2018-04-06 02:31:14] Pool accepted result 0x0004959F
[2018-04-06 02:31:15] Pool accepted result 0x001D970D ( STALE )
[2018-04-06 02:31:15] Pool accepted result 0x00051FEB
[2018-04-06 02:31:15] Pool difficulty: 22029
[2018-04-06 02:31:15] Pool sent a new job (ID: d5be)
[2018-04-06 02:31:16] Pool accepted result 0x00076367 ( STALE )
[2018-04-06 02:31:16] Pool accepted result 0x000856D2 ( STALE )
[2018-04-06 02:31:17] Pool accepted result 0x00082D0D ( STALE )
[2018-04-06 02:31:17] Pool accepted result 0x0000CB8F ( STALE )
[2018-04-06 02:31:21] Pool difficulty: 74383
[2018-04-06 02:31:21] Pool sent a new job (ID: d5b9)
[2018-04-06 02:31:21] Pool accepted result 0x000023DC ( STALE )
[2018-04-06 02:31:22] Pool accepted result 0x0002E9C4 ( STALE )
[2018-04-06 02:32:02] Pool accepted result 0x0000CD7D

If the share is accepted dont worry. Stale share is a result that was sent after a new job arrived, its just an indication, so if server dont accept it, it would be a rejected share. Dont worry about it, maybe ill just remove that indication so people wont worry without a reason 😀

[heavyarms1912]

If the share is accepted dont worry. Stale share is a result that was sent after a new job arrived, its just an indication, so if server dont accept it, it would be a rejected share. Dont worry about it, maybe ill just remove that indication so people wont worry without a reason 😀

Yes probably that would be better idea.  Or just keep a count of the potential stale shares.  is there a way to figure out actual stale shares?

[doktor83]

Rx 580 rig is mining monero at nanopool.Speed is only 740/card, lol, I've got 890/card with XMR stak 64.

when intensity is set at 0, the sw suggest an intensity of 124.
SO, I tried 121,122,123, etc to see the best intensity near it and to do so, I edit the gpuconf section
I've got 0 hashing speed on all threads, all the card.
I waited till all the screen became red. and then I stopped,

Reboot, intensity at 0, and it goes

changed to single gpu intensity, all red.

Reboot, all stock, the same thing.

thenI deleted all the *.srb

Reboot and  its the same.

First I tried at 0, then singles intensity and it doesn't work.

Last try I can do is : erase the *.srb, put everything stock, reboot, set intensity single and then launch WITHOUT launching intensity 0 first.

May be its trying to use the same *.srb (bin) just compiled for that intensity. I don't know
Later tonight I will try again

I want to help you so please copy paste result of this :

SRBMiner-CN.exe -listdevices (run from console)

I will make you a conf file for nanopool so you can try it.

edit:
looks like i maybe found a bug , will fix it and we will see

[doktor83]

If the share is accepted dont worry. Stale share is a result that was sent after a new job arrived, its just an indication, so if server dont accept it, it would be a rejected share. Dont worry about it, maybe ill just remove that indication so people wont worry without a reason 😀

Yes probably that would be better idea.  Or just keep a count of the potential stale shares.  is there a way to figure out actual stale shares?

no that is something only the pool knows.
Also when diff is low jobs come very fast so thats another reason for stale shares.