Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment

[stiffla]

Pi is totally stressed out with all 3 boards, not possible to get them up running.

On Ubuntu, I managed to get all 3 boards running, but after 8 hours, the PSU stopped, I guess it went in protection mode.
One board only ran with 15GH/s, so I guess it is not getting enough power and this caused that the PSU stopped.

Right now, this one board doesn't even start and shows 0 GH/s in cgminer.

My PSU (be quiet! Straight Power E9 700W ATX 2.31)  has 4 rails, but which rail do I have to use?:
I think at the moment I do have two boards connected to HDD wire, which I guess do not serve enough power

12V1-18A  --> HDD/SATA?
12V2-18A  --> 24Pin?
12V3-22A  --> PCIe1?
12V4-22A  --> PCIe2?

Anyone can help me, do you think this is right?

Maybe, then V1 rail definely won't be able to supply 2 board for long time. My kyoritsu clampmeter show about 9 A DC used by single HEX16C.
So you need to devided all three board on V1, V3, V4.
Good luck

Well, I tried both PCIe Ports and also CPU 4 Pin, but one board is still running at ~15GH.
In order to be sure, I tried the board alone, same situation as with all 3 boards.

I will try to get my hands on a second PSU, maybe it will help.
Thanks anyway

Marto, any clue?

Edit: I tried with an extra PSU (16A) just for this one board, same result

.
Clock and voltage please. Leave the board for at least 24 hours to minimize variance.

Clock is 1500 and voltage is 1100

Thx!

[blitzwilli1]

thank you that it was apparently

get under SSH screen-r this error message

have HEX16A2
mr-3020 with FW 0.1.3

can someone please help me?

Tue Jan  7 12:55:44 CET 2014: cgminer exited status (1)
Tue Jan  7 12:55:44 CET 2014: Sleeping for 10...
Tue Jan  7 12:55:54 CET 2014: Starting cgminer
 [2014-01-07 12:55:54] Unexpected extra commandline arguments

Try to fill in the : Hex16U Frequency (Default: 54) with 54.
If still error then change : Handle USB detect errors as (Default: hexA) to hexA

[Zich]

.......

Well, I tried both PCIe Ports and also CPU 4 Pin, but one board is still running at ~15GH.
In order to be sure, I tried the board alone, same situation as with all 3 boards.

I will try to get my hands on a second PSU, maybe it will help.
Thanks anyway

Marto, any clue?

Edit: I tried with an extra PSU (16A) just for this one board, same result

Sound like faulty 4 chips but not so sure. If only your TL-MR3020 not bricked, you can check each chip status in cgminer api log.

[Zich]

thank you that it was apparently

get under SSH screen-r this error message

have HEX16A2
mr-3020 with FW 0.1.3

can someone please help me?

Tue Jan  7 12:55:44 CET 2014: cgminer exited status (1)
Tue Jan  7 12:55:44 CET 2014: Sleeping for 10...
Tue Jan  7 12:55:54 CET 2014: Starting cgminer
 [2014-01-07 12:55:54] Unexpected extra commandline arguments

Try to fill in the : Hex16U Frequency (Default: 54) with 54.
If still error then change : Handle USB detect errors as (Default: hexA) to hexA

Great 

[blitzwilli1]

what I am but wonder

when I log in (mr-3020)
under Status
Am I missing "status cgminer"

thank you that it was apparently

get under SSH screen-r this error message

have HEX16A2
mr-3020 with FW 0.1.3

can someone please help me?

Tue Jan  7 12:55:44 CET 2014: cgminer exited status (1)
Tue Jan  7 12:55:44 CET 2014: Sleeping for 10...
Tue Jan  7 12:55:54 CET 2014: Starting cgminer
 [2014-01-07 12:55:54] Unexpected extra commandline arguments

Try to fill in the : Hex16U Frequency (Default: 54) with 54.
If still error then change : Handle USB detect errors as (Default: hexA) to hexA

Great 

[Zich]

what I am but wonder

when I log in (mr-3020)
under Status
Am I missing "status cgminer"

Yes, but not only you. All image from technobit come with no cgminer status   since all available on cgminer api log

[stan258]

My package has not left Sofia for a couple days.  Is this normal?

[Zich]

My package has not left Sofia for a couple days.  Is this normal?

Definitely not normal. speedy?

speedy had no status update on tracking page.
But you can ask them for the real status. http://www.speedy.bg/begin.php?page=spd_Opinions&lang=en

[stan258]

My package has not left Sofia for a couple days.  Is this normal?

Definitely not normal. speedy?

speedy had no status update on tracking page.
But you can ask them for the real status. http://www.speedy.bg/begin.php?page=spd_Opinions&lang=en

Yes Speedy. Thanks for the link.

[Zich]

My package has not left Sofia for a couple days.  Is this normal?

Definitely not normal. speedy?

speedy had no status update on tracking page.
But you can ask them for the real status. http://www.speedy.bg/begin.php?page=spd_Opinions&lang=en

Yes Speedy. Thanks for the link.

No problem  

If your shipping address outside EU, ask them for their partner tracking number. Speedy use DHL while shipping my package to Indonesia.

[Zich]

well i made it now with the older version of cgminer. Its just that the boards gets recognized but only for couple of minutes.
works fine now for me..

anyway thank you

The latest patch that available in technobit website afe7710858e4ce28bb60f6ae6e167a18d687634f.patch is for cgminer3.8.5.
It's will not work on other cgminer version.
You can frequently check technobit website for new patch.

Other old patch:
7ddb94d6964f2451d2e76f70b069dfdf2b3d4d6f.patch is for cgminer3.8.3
2e9afa38e39678a5dc5bf8be6d20baf1849b548c.patch is for cgminer3.8.1
cgminer_3_6_4_rev_273b04be62a69b2fcfa95790b99822a0bcfd8e75.patch is for cgminer3.6.4(sorry, the link no longer available on technobit website)

[dave111223]

Started a scam thread here: https://bitcointalk.org/index.php?topic=397901.0

Still no product, no refund, no direct response from technobit about my order.

[elchorizo]

Started a scam thread here: https://bitcointalk.org/index.php?topic=397901.0

Still no product, no refund, no direct response from technobit about my order.

If I don't get some type of concrete update or shipping as well I may do the same. "December" order here as well with nothing to show for it.

[stan258]

My package has not left Sofia for a couple days.  Is this normal?

Definitely not normal. speedy?

speedy had no status update on tracking page.
But you can ask them for the real status. http://www.speedy.bg/begin.php?page=spd_Opinions&lang=en

Yes Speedy. Thanks for the link.

No problem  

If your shipping address outside EU, ask them for their partner tracking number. Speedy use DHL while shipping my package to Indonesia.

So Far So good. 

Hello,
 
This parcel left Bulgaria last night.
It was given to us on 06.01. and all the international parcels leave Bulgaria on the next working day.
The parcel is traveling on its way to the final destination.
You can check again its status by writing us again on an email international@speedy.bg and we will provide you the actual status.
If there is anything else that we can do to help you, please let us know.
Have a nice day!
 
Best regards,
 
Magdalena Shishkova
International clients specialist
Speedy JSC
0 7001 8001
www.speedy.bg

[Zich]

So Far So good.  

Hello,
 
This parcel left Bulgaria last night.
It was given to us on 06.01. and all the international parcels leave Bulgaria on the next working day.
The parcel is traveling on its way to the final destination.
You can check again its status by writing us again on an email international@speedy.bg and we will provide you the actual status.
If there is anything else that we can do to help you, please let us know.
Have a nice day!
 
Best regards,
 
Magdalena Shishkova
International clients specialist
Speedy JSC
0 7001 8001
www.speedy.bg

Man, i miss magdalena. I mail her everyday when my package stuck for 3 week in sofia  
Speedy tracking number 60046781287  <=== Can't call this as tracking  

If only speedy give me the DHL tracking number at that time, then i won't need to mail them everyday at the fourth week. But speedy so stubborn.
DHL tracking number 5359977873  <=== Real tracking  

[TylerRice]

@marto74

An update on what date you are up to with shipping to put people at ease would be nice plox

[Leahcim]

Hi,

are people really getting miners? I ordered 3 with 3 colleagues from the december batch and still no sign of shipment. I don't want to know how long my second order with own chips will take, i think with all this delay the money was wasted. :-/

Bye
Michael

[Zich]

Hi,

are people really getting miners? I ordered 3 with 3 colleagues from the december batch and still no sign of shipment. I don't want to know how long my second order with own chips will take, i think with all this delay the money was wasted. :-/

Bye
Michael

Yes, my second order with marto 

UPS tracking number H8552206103

[TylerRice]

Maybe if people that have ordered could do a post like the following:

Order Date, Shipping Status, etc

We might be able to pin point where marto is up to in shipping?

Thanks.

[stan258]

So Far So good.  

Hello,
 
This parcel left Bulgaria last night.
It was given to us on 06.01. and all the international parcels leave Bulgaria on the next working day.
The parcel is traveling on its way to the final destination.
You can check again its status by writing us again on an email international@speedy.bg and we will provide you the actual status.
If there is anything else that we can do to help you, please let us know.
Have a nice day!
 
Best regards,
 
Magdalena Shishkova
International clients specialist
Speedy JSC
0 7001 8001
www.speedy.bg

Man, i miss magdalena. I mail her everyday when my package stuck for 3 week in sofia  
Speedy tracking number 60046781287  <=== Can't call this as tracking  

If only speedy give me the DHL tracking number at that time, then i won't need to mail them everyday at the fourth week. But speedy so stubborn.
DHL tracking number 5359977873  <=== Real tracking  

Ya she would not give me the final destination company or tracking.