Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment

[Leahcim]

Same error here but one from six board. Helps only when i shut down the psu. Other five board work well with 20gh.

Hi,

my HEX16A2, which was delivered on thursday, went down from about 20HG/s to 5HG/s last night. It did that for the third time. I have a powered USB HUB and a 600W power supply, that is only for this miner. Restart of cgminer does not help, when i turn off the 12v and then turn it on again, the miner goes back to normal work. Is there a command to reset the miner hardware?

Bye
Michael

No Idea on that one?

You can test the problem board without usb hub to see the behavior. Did the powered usb hub use same power source as the miner?
What is your usb hub brand? Some of us encounter problem with usb hub that use stt chip.

It had the same problem without hub, direct connected to the pi, that was why i added the hub.

[Zich]

Same error here but one from six board. Helps only when i shut down the psu. Other five board work well with 20gh.

Hi,

my HEX16A2, which was delivered on thursday, went down from about 20HG/s to 5HG/s last night. It did that for the third time. I have a powered USB HUB and a 600W power supply, that is only for this miner. Restart of cgminer does not help, when i turn off the 12v and then turn it on again, the miner goes back to normal work. Is there a command to reset the miner hardware?

Bye
Michael

No Idea on that one?

You can test the problem board without usb hub to see the behavior. Did the powered usb hub use same power source as the miner?
What is your usb hub brand? Some of us encounter problem with usb hub that use stt chip.

It had the same problem without hub, direct connected to the pi, that was why i added the hub.

Hmm, let me test with my pi later.

Result:

I had been test HEX16C on pi whole night. It work well except for chip 0 nonce problem i guess since hash rate decrease from 23 GH/s to 20 Gh/s.
You need to test the board on other host, PC maybe just to make sure the board status.

[sgrunger]

Can anyone confirm I can run ~20 or so boards with the TP-Link MR3020, with two 10port powered USB2 hubs on piggyback ?

Thanks.

[Zich]

Can anyone confirm I can run ~20 or so boards with the TP-Link MR3020, with two 10port powered USB2 hubs on piggyback ?

Thanks.

I am not sure about this since i don't had that many board. But i am more prefer to buy another TL-ML3020 since the price is very cheap.

With 2 HEX16A & 1 HEX16C, my TL-ML3020 memory usage already at 156%. Add 2 nanofury memory usage reach 180%.

[loshia]

Can anyone confirm I can run ~20 or so boards with the TP-Link MR3020, with two 10port powered USB2 hubs on piggyback ?

Thanks.

I am not sure about this since i don't had that many board. But i am more prefer to buy another TL-ML3020 since the price is very cheap.

With 2 HEX16A & 1 HEX16C, my TL-ML3020 memory usage already at 156%. Add 2 nanofury memory usage reach 180%.

Two tplinks common ground and the hub I am posting about all the times;)
If you want them over clocked go for three tplinks because of common ground I think 1250w psu will die with 10 Over clocked  boards

[awgilyas]

Can anyone confirm I can run ~20 or so boards with the TP-Link MR3020, with two 10port powered USB2 hubs on piggyback ?

Thanks.

I am not sure about this since i don't had that many board. But i am more prefer to buy another TL-ML3020 since the price is very cheap.

With 2 HEX16A & 1 HEX16C, my TL-ML3020 memory usage already at 156%. Add 2 nanofury memory usage reach 180%.

I don't think memory might be an issue. I've got 7 HEX16A2 running and doesn't seem like it's hampering performance.

I'd still limit it to 10 per router though. To be on the safe side.

[Zich]

Can anyone confirm I can run ~20 or so boards with the TP-Link MR3020, with two 10port powered USB2 hubs on piggyback ?

Thanks.

I am not sure about this since i don't had that many board. But i am more prefer to buy another TL-ML3020 since the price is very cheap.

With 2 HEX16A & 1 HEX16C, my TL-ML3020 memory usage already at 156%. Add 2 nanofury memory usage reach 180%.

I don't think memory might be an issue. I've got 7 HEX16A2 running and doesn't seem like it's hampering performance.

I'd still limit it to 10 per router though. To be on the safe side.

Yes, but i just don't like pushing the router that hard. That why my 2 nanofury moved to tablet now.

[loshia]

Can anyone confirm I can run ~20 or so boards with the TP-Link MR3020, with two 10port powered USB2 hubs on piggyback ?

Thanks.

I am not sure about this since i don't had that many board. But i am more prefer to buy another TL-ML3020 since the price is very cheap.

With 2 HEX16A & 1 HEX16C, my TL-ML3020 memory usage already at 156%. Add 2 nanofury memory usage reach 180%.

I don't think memory might be an issue. I've got 7 HEX16A2 running and doesn't seem like it's hampering performance.

I'd still limit it to 10 per router though. To be on the safe side.

Yes, but i just don't like pushing the router that hard. That why my 2 nanofury moved to tablet now.

180% means not what you think

humans us command free
 otherwise read what it exactly means

[Zich]

180% means not what you think

humans us command free
 otherwise read what it exactly means

Yeah, but seeing 180% everyday make me worried 

[loshia]

180% means not what you think

humans us command free
 otherwise read what it exactly means

Yeah, but seeing 180% everyday make me worried 

There may be worse
In general with technoit image almost 50% of the ram stays free.

[Gontxi]

I cant get connection to p2pool.org for Zetazoin mining...

This is my error.



*Edit: Using Windows 7 Pro 32

[loshia]

I cant get connection to p2pool.org for Zetazoin mining...

This is my error.



*Edit: Using Windows 7 Pro 32

What other software and hardware are you using to mine ataa coins?

[acidfox]

What other software and hardware are you using to mine ataa coins?

Most of us dont't mine alt coins. Because it isn't worth.
But if want to mine with p2pool i think its the best choice to use linux an cgminer 3.10 with patch from technobit.

[Gontxi]

What other software and hardware are you using to mine ataa coins?

Most of us dont't mine alt coins. Because it isn't worth.
But if want to mine with p2pool i think its the best choice to use linux an cgminer 3.10 with patch from technobit.

Hmmmm... Going to try this weekend with Rasp PI
Tks

[Zich]

What other software and hardware are you using to mine ataa coins?

Most of us dont't mine alt coins. Because it isn't worth.
But if want to mine with p2pool i think its the best choice to use linux an cgminer 3.10 with patch from technobit.

Hmmmm... Going to try this weekend with Rasp PI
Tks

That's better 

[Leahcim]

i configured 1000mV when then HEX16A2 went down to 5GH/s, at the moment i configured 1100mv and it did not happen again yet. Maybe it the lower voltage could make it unstable!?

Bye
Michael

[Zich]

i configured 1000mV when then HEX16A2 went down to 5GH/s, at the moment i configured 1100mv and it did not happen again yet. Maybe it the lower voltage could make it unstable!?

Bye
Michael

Hmm, i had been playing with various setting but never had similar problem.
At least your miner already stable right now 

[cannachris]

date of the payment

I have paid 581€ for order BJJNEKBIM by bank wire on 30-12-3013 from account number NL89RABO0368044971.

Will you include a replacement for the broken HEX16a2 from order WVEFURYEA? I will gladly ship the broken miner back to you if you provide a shipping address.

[mudge]

I asked for a refund for the router I ordered but had not been shiped.



Order no CNMUQTEUH
asked on the 21/1/14 and 22/1/14 both on the technobit site and via pm here.

Guess what

NO COMUNICATION AT ALL.

Please cancel my order and refund me my BTC as I have requested.

[patyjm]

hello please I need to know how to install my 1 x 40 GH / s Full set Technobit HEX16B 16 Bitfury chip based bitcoin please miner.ayuda