Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment

[loshia]

Cgminer API is not active. I dont have any API client to check this. When u know any, please link to download.
Here is the thins:
http://users.atw.hu/ifa/rpi/dmesg.txt
http://users.atw.hu/ifa/rpi/lsusb.txt

In Ssh type cgminer-API devs
Then cgminer-API stats and post it here please
All commands are lower cased

[loshia]

There are three more issues with your setup which can impact performance
1. Disable blacklist cdc-acm driver
2. Buy mtt hub the one you are having is not. You can follow my and Zich posts about such hubs
3. Try three boards first single psu wth common ground for the pi hub and boards

[iFA88]

Cgminer API is not active. I dont have any API client to check this. When u know any, please link to download.
Here is the thins:
http://users.atw.hu/ifa/rpi/dmesg.txt
http://users.atw.hu/ifa/rpi/lsusb.txt

In Ssh type cgminer-API devs
Then cgminer-API stats and post it here please
All commands are lower cased

I have raspbian OS and not tplink-openwrt. I dont have any cgminer-api program.

[iFA88]

There are three more issues with your setup which can impact performance
1. Disable blacklist cdc-acm driver
2. Buy mtt hub the one you are having is not. You can follow my and Zich posts about such hubs
3. Try three boards first single psu wth common ground for the pi hub and boards

1. why?
2. i have this: http://www.konigelectronic.com/de_de/1004452 i brought this 2 days ago
3. ok i would try it tomorrow.

[loshia]

Cgminer API is not active. I dont have any API client to check this. When u know any, please link to download.
Here is the thins:
http://users.atw.hu/ifa/rpi/dmesg.txt
http://users.atw.hu/ifa/rpi/lsusb.txt

In Ssh type cgminer-API devs
Then cgminer-API stats and post it here please
All commands are lower cased

Dude trust me by the one from amazon de you want regret the one is not good any output from API?

[iFA88]

http://users.atw.hu/rpi/stats.txt
http://users.atw.hu/rpi/summary.txt

[loshia]

http://users.atw.hu/rpi/stats.txt
http://users.atw.hu/rpi/summary.txt

Nothing can be seen in provided urls what you need to check if all chips are hashing chip nonces count should be equal +-20 is  ok from chip to chip

I think all is good with chips change the hub but first try one board only without a hub

[braindead]

Urgent help needed

I´ve upgraded my router with last image and now i get this error in SSH:


ntpd: bad address '3.openwrt.pool.ntp.org'
ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
ntpd: bad address '2.openwrt.pool.ntp.org'
ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
ntpd: bad address '1.openwrt.pool.ntp.org'
ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
ntpd: bad address '0.openwrt.pool.ntp.org'
ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Alarm clock
ntpd: bad address '3.openwrt.pool.ntp.org'
ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
ntpd: bad address '2.openwrt.pool.ntp.org'
ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
ntpd: bad address '1.openwrt.pool.ntp.org'
ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
ntpd: bad address '0.openwrt.pool.ntp.org'
ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping


Cgminer won´t start

[loshia]

Urgent help needed

I´ve upgraded my router with last image and now i get this error in SSH:


ntpd: bad address '3.openwrt.pool.ntp.org'
ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
ntpd: bad address '2.openwrt.pool.ntp.org'
ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
ntpd: bad address '1.openwrt.pool.ntp.org'
ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
ntpd: bad address '0.openwrt.pool.ntp.org'
ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Alarm clock
ntpd: bad address '3.openwrt.pool.ntp.org'
ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
ntpd: bad address '2.openwrt.pool.ntp.org'
ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
ntpd: bad address '1.openwrt.pool.ntp.org'
ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
ntpd: bad address '0.openwrt.pool.ntp.org'
ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping


Cgminer won´t start

Ip mask gw and DNS check them

[braindead]

Urgent help needed

I´ve upgraded my router with last image and now i get this error in SSH:


ntpd: bad address '3.openwrt.pool.ntp.org'
ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
ntpd: bad address '2.openwrt.pool.ntp.org'
ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
ntpd: bad address '1.openwrt.pool.ntp.org'
ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
ntpd: bad address '0.openwrt.pool.ntp.org'
ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Alarm clock
ntpd: bad address '3.openwrt.pool.ntp.org'
ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
ntpd: bad address '2.openwrt.pool.ntp.org'
ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
ntpd: bad address '1.openwrt.pool.ntp.org'
ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
ntpd: bad address '0.openwrt.pool.ntp.org'
ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping


Cgminer won´t start

Ip mask gw and DNS check them

Yeah You are the man, all working again, many many tks  let´s get back to minning

[loshia]

Urgent help needed

I´ve upgraded my router with last image and now i get this error in SSH:


ntpd: bad address '3.openwrt.pool.ntp.org'
ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
ntpd: bad address '2.openwrt.pool.ntp.org'
ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
ntpd: bad address '1.openwrt.pool.ntp.org'
ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
ntpd: bad address '0.openwrt.pool.ntp.org'
ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Alarm clock
ntpd: bad address '3.openwrt.pool.ntp.org'
ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
ntpd: bad address '2.openwrt.pool.ntp.org'
ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
ntpd: bad address '1.openwrt.pool.ntp.org'
ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
ntpd: bad address '0.openwrt.pool.ntp.org'
ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping


Cgminer won´t start

Ip mask gw and DNS check them

Super


Yeah You are the man, all working again, many many tks  let´s get back to minning

[loshia]

Anyone has these problem on patch?

Code:

root@rpi:~/cgminer-3.10.0# patch -p1 < 87f0213112a3c69e2c55160b9c674b9de2cde996_u_1d.patch
patching file cgminer.c
patching file configure.ac
patching file driver-hexminerb.c
patching file driver-hexminerb.h
patching file libhexb.c
patching file Makefile.am
Hunk #1 FAILED at 51.
1 out of 2 hunks FAILED -- saving rejects to file Makefile.am.rej
patching file miner.h
patching file usbutils.c
patching file usbutils.h
patching file api.c
patching file driver-hexminera.c
patching file driver-hexminera.h
patching file libhexa.c
patching file hubpower.c
patching file driver-hexminerc.c
patching file driver-hexminerc.h
patching file libhexc.c
patching file driver-hexmineru.c
patching file driver-hexmineru.h
patching file libhexu.c
patching file driver-hexminer8.c
patching file driver-hexminer8.h
patching file libhex8.c
patching file lib_mcp2210_hexu.c

on make:

Code:

make[2]: Entering directory `/root/cgminer-3.10.0'
  CCLD   cgminer
cgminer-libbitfury.o: In function `spi_reset':
/root/cgminer-3.10.0/libbitfury.c:226: undefined reference to `mcp2210_set_gpio_settings'
/root/cgminer-3.10.0/libbitfury.c:233: undefined reference to `mcp2210_spi_transfer'
/root/cgminer-3.10.0/libbitfury.c:239: undefined reference to `mcp2210_set_gpio_settings'
cgminer-libbitfury.o: In function `spi_txrx':
/root/cgminer-3.10.0/libbitfury.c:255: undefined reference to `mcp2210_spi_transfer'
/root/cgminer-3.10.0/libbitfury.c:265: undefined reference to `mcp2210_spi_transfer'
collect2: ld returned 1 exit status
make[2]: *** [cgminer] Error 1
make[2]: Leaving directory `/root/cgminer-3.10.0'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/root/cgminer-3.10.0'
make: *** [all] Error 2

cgminer 3.10.0
87f0213112a3c69e2c55160b9c674b9de2cde996_u_1d.patch
from technobit 0.1.7.
The 3.8.5 patching, configure and make work well.

Try latest git dude.

3.8.5 is ok for you concentrate on other issues first.

[iFA88]

Was my faulty, i have selected a other tag on the git site. Now works perfect.

[loshia]

Was my faulty, i have selected a other tag on the git site. Now works perfect.

I am wandering what have you changed the hub or?
oldest version is ok also even showing more MH/s because of the dupes

[loshia]

Was my faulty, i have selected a other tag on the git site. Now works perfect.

I am wandering what have you changed the hub or?
oldest version is ok also even showing more MH/s because of the dupes

Guy's,
I found a bug for hex16A2 boards loosing woork of chip 0 - 87f0213112a3c69e2c55160b9c674b9de2cde996_u_1d.patch

while waiting for fix you can change

driver-hexminerc.c line 363
if (libhexc_cachenonce(&array_nonce_cache[0], nonce) && libhexc_cachenonce(&array_nonce_cache[lastchippos], nonce)) {
 
to if ( libhexc_cachenonce(&array_nonce_cache[lastchippos], nonce)) {    

This will bring back some dupes but will increase the performance with 1/16

[Zich]

Was my faulty, i have selected a other tag on the git site. Now works perfect.

I am wandering what have you changed the hub or?
oldest version is ok also even showing more MH/s because of the dupes

Guy's,
I found a bug for hex16A2 boards loosing woork of chip 0 - 87f0213112a3c69e2c55160b9c674b9de2cde996_u_1d.patch

while waiting for fix you can change

driver-hexminerc.c line 363
if (libhexc_cachenonce(&array_nonce_cache[0], nonce) && libhexc_cachenonce(&array_nonce_cache[lastchippos], nonce)) {
 
to if ( libhexc_cachenonce(&array_nonce_cache[lastchippos], nonce)) {    

This will bring back some dupes but will increase the performance with 1/16

Great, thanks loshia

[Zich]

I swear that i did nothing to cgminer



Only hoping that it was true 

[loshia]

I swear that i did nothing to cgminer



Only hoping that it was true  

Normal it is because of dupes buffer needs to be increased yor host is too fast
Patch will come shortly
Try paid shares formula to see the actual hash rate 2pow32/dev elapsed*diff accepted/10pow9

[Zich]

Normal it is because of dupes buffer needs to be increased yor host is too fast
Patch will come shortly
Try paid shares formula to see the actual hash rate 2pow32/dev elapsed*diff accepted/10pow9

Android tablet 

[loshia]

Normal it is because of dupes buffer needs to be increased yor host is too fast
Patch will come shortly
Try paid shares formula to see the actual hash rate 2pow32/dev elapsed*diff accepted/10pow9

Android tablet 

Yeah you know your stuff dude:)

Nice....