Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment

[marto74]

Hey Marto,

If you could share slightly more information to set peoples mind at ease might be good and calm people down. We all understand delays, But maybe once ever couple working days you could come on here and post exactly what order date you have shipped between the last update and the time you make the post.

Something in the form of:

Hi postage update for the 4/01/2014

Posted all orders made on 1/12/2013
-------------------------------------

Hi postage update for the 7/01/2014

Posted all orders up to and including the 5/12/2013
----------------------------------------------------

Something like that small of an update will put a lot of people at ease. Most of your updates are very indecisive. If we have learnt anything from previous unmentioned companies indecisive is a very very bad thing for your reputation.


Thanks and we all hope to see your company improve through out the new year.

Tyler.

Sound like BFL Jody blog update 

:0

Let's hope that aside I'm not a lady we are far away from BFL in terms of late shipments

[1714216735]

1714216735

[1714216735]

1714216735

[1714216735]

1714216735

[1714216735]

1714216735

[Zich]

The black hub righ.? 10 ports?
You need the white one first chip should be 7 port tt
Anyway
Thank you for  the info

nanofury on Dlink DUB-H7. The tt hub is 7 port used for HEX16A & HEX16C. But there is no problem until i plug in the HEX16C.



Now nanofury run using bfgminer3.9.0 on android tablet 
No luck so far to run all on tablet even if i run it separately(nano on bfgminer,  HEX16A & HEX16C on cgminer)

[loshia]

The black hub righ.? 10 ports?
You need the white one first chip should be 7 port tt
Anyway
Thank you for  the info

nanofury on Dlink DUB-H7. The tt hub is 7 port used for HEX16A & HEX16C. But there is no problem until i plug in the HEX16C.

Ok
I think it is because of the hub.
Check my posts about hub and check terminus site the only M tt chip is the 7 port one if I remember
In case if you wanna experiment more you can plug nanos in port 1 and two of the hub
Do you power your hub from psu?
Pshttp://terminus-tech.com/English/products.html

[Zich]

Ok
I think it is because of the hub.
Check my posts about hub and check terminus site the only M tt chip is the 7 port one if I remember
In case if you wanna experiment more you can plug nanos in port 1 and two of the hub
Do you power your hub from psu?
Pshttp://terminus-tech.com/English/products.html

Yeah, all powered from PSU 

[benyus16]

But you did NOT answer the question AGAIN!!!

Hey Marto,

If you could share slightly more information to set peoples mind at ease might be good and calm people down. We all understand delays, But maybe once ever couple working days you could come on here and post exactly what order date you have shipped between the last update and the time you make the post.

Something in the form of:

Hi postage update for the 4/01/2014

Posted all orders made on 1/12/2013
-------------------------------------

Hi postage update for the 7/01/2014

Posted all orders up to and including the 5/12/2013
----------------------------------------------------

Something like that small of an update will put a lot of people at ease. Most of your updates are very indecisive. If we have learnt anything from previous unmentioned companies indecisive is a very very bad thing for your reputation.


Thanks and we all hope to see your company improve through out the new year.

Tyler.

Sound like BFL Jody blog update 

:0

Let's hope that aside I'm not a lady we are far away from BFL in terms of late shipments

[marto74]

But you did NOT answer the question AGAIN!!!

Hey Marto,

If you could share slightly more information to set peoples mind at ease might be good and calm people down. We all understand delays, But maybe once ever couple working days you could come on here and post exactly what order date you have shipped between the last update and the time you make the post.

Something in the form of:

Hi postage update for the 4/01/2014

Posted all orders made on 1/12/2013
-------------------------------------

Hi postage update for the 7/01/2014

Posted all orders up to and including the 5/12/2013
----------------------------------------------------

Something like that small of an update will put a lot of people at ease. Most of your updates are very indecisive. If we have learnt anything from previous unmentioned companies indecisive is a very very bad thing for your reputation.


Thanks and we all hope to see your company improve through out the new year.

Tyler.

Sound like BFL Jody blog update  

:0

Let's hope that aside I'm not a lady we are far away from BFL in terms of late shipments

We are spending our efforts on production shipping and testing.
Yesterday more than 10 TH of devices went out.
We did missed our goal to catch up until Christmas .
But We are very close now.
I''m not able to provide more detailed info @ the moment

Best Martin

[benyus16]

Thank you! we are waiting for the orders.

But you did NOT answer the question AGAIN!!!

Hey Marto,

If you could share slightly more information to set peoples mind at ease might be good and calm people down. We all understand delays, But maybe once ever couple working days you could come on here and post exactly what order date you have shipped between the last update and the time you make the post.

Something in the form of:

Hi postage update for the 4/01/2014

Posted all orders made on 1/12/2013
-------------------------------------

Hi postage update for the 7/01/2014

Posted all orders up to and including the 5/12/2013
----------------------------------------------------

Something like that small of an update will put a lot of people at ease. Most of your updates are very indecisive. If we have learnt anything from previous unmentioned companies indecisive is a very very bad thing for your reputation.


Thanks and we all hope to see your company improve through out the new year.

Tyler.

Sound like BFL Jody blog update  

:0

Let's hope that aside I'm not a lady we are far away from BFL in terms of late shipments

We are spending our efforts on production shipping and testing.
Yesterday more than 10 TH of devices went out.
We did missed our goal to catch up until Christmas .
But We are very close now.
I''m not able to provide more detailed info @ the moment

Best Martin

[stiffla]

Hi, I have a problem again with my boards.

I had one board up and running since Christmas mit terminal screw.
Now I have received 2 addtional boards with molex connector.

I connected them to my powerd usb hub and PSU with seperated rails with each 18A, so enough power.

Cgminer on raspberry pi freezes immediatly as soon as i try to start it.
On Ubuntu, i can only start 2 boards, the 3. one will be shown as OFF in cgminer.
I already tried different USB cables.

Is it possible that this one board is broken or does anyone have the same problem?

best regards

[stan258]

Hi, I have a problem again with my boards.

I had one board up and running since Christmas mit terminal screw.
Now I have received 2 addtional boards with molex connector.

I connected them to my powerd usb hub and PSU with seperated rails with each 18A, so enough power.

Cgminer on raspberry pi freezes immediatly as soon as i try to start it.
On Ubuntu, i can only start 2 boards, the 3. one will be shown as OFF in cgminer.
I already tried different USB cables.

Is it possible that this one board is broken or does anyone have the same problem?

best regards

Try Hex Miner windows on a PC with just that board. 

[adkchum]

What is the best OC settings everyone has tested.

[zulover]

But you did NOT answer the question AGAIN!!!

Hey Marto,

If you could share slightly more information to set peoples mind at ease might be good and calm people down. We all understand delays, But maybe once ever couple working days you could come on here and post exactly what order date you have shipped between the last update and the time you make the post.

Something in the form of:

Hi postage update for the 4/01/2014

Posted all orders made on 1/12/2013
-------------------------------------

Hi postage update for the 7/01/2014

Posted all orders up to and including the 5/12/2013
----------------------------------------------------

Something like that small of an update will put a lot of people at ease. Most of your updates are very indecisive. If we have learnt anything from previous unmentioned companies indecisive is a very very bad thing for your reputation.


Thanks and we all hope to see your company improve through out the new year.

Tyler.

Sound like BFL Jody blog update  

:0

Let's hope that aside I'm not a lady we are far away from BFL in terms of late shipments

We are spending our efforts on production shipping and testing.
Yesterday more than 10 TH of devices went out.
We did missed our goal to catch up until Christmas .
But We are very close now.
I''m not able to provide more detailed info @ the moment

Best Martin

thats all dandy but some compensation is needed for late deliveries.

[Zich]

Hi, I have a problem again with my boards.

I had one board up and running since Christmas mit terminal screw.
Now I have received 2 addtional boards with molex connector.

I connected them to my powerd usb hub and PSU with seperated rails with each 18A, so enough power.

Cgminer on raspberry pi freezes immediatly as soon as i try to start it.
On Ubuntu, i can only start 2 boards, the 3. one will be shown as OFF in cgminer.
I already tried different USB cables.

Is it possible that this one board is broken or does anyone have the same problem?

best regards

you can try to restart cgminer from cgminer setting over & over.
While testing cgminer 3.8.5 on my android tablet, my HEX16c not detected while other 2 HEX16A detected. Then restart cgminer, HEX16C detected as HEX16A. The restart again & HEX16C detected along with HEX16A.
Had you already try to switch the miner position & still encounter same problem? If the other miner dead then your miner is ok. Maybe problem with usb HUB.

[Zich]

What is the best OC settings everyone has tested.

--hexminerc-voltage 1100 --hexminerc-options 16:1500

[gkahr78]

I ordered the same but the Jan batch. Is the power connector part of the package?

What replacement fan would you recommend?

No, the power connector( Blue & black cable with EPS adapter) & blue heatsink is not part of the package. I made the power connector & buy the heatsink in EBAY

I am still looking for other fan that closed to SUNON performance. i will post if i find something that closed enough since i had air conditioner in room. That sunon really great, just too noisy for me to place it in my bed room  

Try prepare what you need from now, so when the miner arrived you can start hashing.
PSU, the host ( PC or TPLINK TL-MR3020), usb cable.

That's what I am already trying to do: be prepared. Got my cables (easiest part) and I am a bit worried about connecting with wires and not molex.
As for fans. I think I strap a Noiseblocker 120mm XLP(http://www.blacknoise.com/en/products/it/17/Noiseblocker-NB_BlackSilentFan_120mm) on the heat sink. I did the same with my four bitburner. The XLP has up to 75cfm.

What I don't understand is why everybody uses the tl-mr3020. I have four bitburners running on a Pi and 10 red fury sticks running on another Pi. Is there a problem with using cgminer on a PI with these HEX16A2?

Thanks
Lars

[Zich]

What I don't understand is why everybody uses the tl-mr3020. I have four bitburners running on a Pi and 10 red fury sticks running on another Pi. Is there a problem with using cgminer on a PI with these HEX16A2?

Thanks
Lars

The answer is because TL-MR3020 more cheaper than pi

[Jeffrey]

2 out of my 3 orders were shipped and received late december.
Now I'm just waiting for order OSPRSHZDH , order/pay date 28-11-2013, "shipment december"

[minime]

i get no device detected can someone advise please, ubuntu running cgminer with hex build..

[mudge]

Well got a shipping email today but no tracking number as yet.
Hope this is not a way to just avoid refunding me
Will keep you all informed

Well just as I thought. Still no tracking number so I will guess these have not been sent yet, and this is just away to avoid refund

[stan258]

Well got a shipping email today but no tracking number as yet.
Hope this is not a way to just avoid refunding me
Will keep you all informed

Well just as I thought. Still no tracking number so I will guess these have not been sent yet, and this is just away to avoid refund

The tracking info is in the order details on the Technobit site. For me I paid for UPS express but it shipped speedy.  I can't track speedy to states. Dpd is horrible to states I just want it to show up with out major complications.

[mudge]

Well got a shipping email today but no tracking number as yet.
Hope this is not a way to just avoid refunding me
Will keep you all informed

Well just as I thought. Still no tracking number so I will guess these have not been sent yet, and this is just away to avoid refund

The tracking info is in the order details on the Technobit site. For me I paid for UPS express but it shipped speedy.  I can't track speedy to states. Dpd is horrible to states I just want it to show up with out major complications.

not for me i checked nothing in order detail except shipped