Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment

[mudge]

We stareted shipping again the left orders with December shiping both  Hex16a2 (c) and Hex16b orders and some Hex16a
Unfortunately we still on  December orders .

All DPD sendings can be tracked in our Local representative's page here http://www.speedy.bg/begin.php?page=web_Tracking&lang=en

Hello,

i have a December order for the Hex16A and i didn't got any email from you and i cannot see a changed status on my order info at the technobit.eu user backend. Can you please reply to emails? A few words are better then just silence.

Thank You

tell me about it

[1714197554]

1714197554

[1714197554]

1714197554

[TylerRice]

Dear, firends,
We stareted shipping again the left orders with December shiping both  Hex16a2 (c) and Hex16b orders and some Hex16a
Unfortunately we still on  December orders .
Nanofuries We send again some orders today and due to some productiondelays , there are still orders that are late.
We are scheduling production
All DPD sendings can be tracked in our Local representative's page here http://www.speedy.bg/begin.php?page=web_Tracking&lang=en
All customers with faulty units Just return them to sending addres and We'll send you replacement/repaired unit .
We almost can not wait for the first samples of Coincraft A1 chips in order to test our desighn.
 
Wishing you Happy new year.

Technobit team

Hey Marto,

If you could share slightly more information to set peoples mind at ease might be good and calm people down. We all understand delays, But maybe once ever couple working days you could come on here and post exactly what order date you have shipped between the last update and the time you make the post.

Something in the form of:

Hi postage update for the 4/01/2014

Posted all orders made on 1/12/2013
-------------------------------------

Hi postage update for the 7/01/2014

Posted all orders up to and including the 5/12/2013
----------------------------------------------------

Something like that small of an update will put a lot of people at ease. Most of your updates are very indecisive. If we have learnt anything from previous unmentioned companies indecisive is a very very bad thing for your reputation.


Thanks and we all hope to see your company improve through out the new year.

Tyler.

[newminer1988]

Hi!
I have been trying to get a board working on my laptop (win7) but no luck so far.
edit: no LED is lighting up on the board the board is being powered by a corsair rm750 is this correct??

I have received the tplink router with technobit firmware and tomorrow I want to connect four boards to it.
Does anyone have a tutorial for how i should do this?
Do i have to change the fan that is supplied with boards?

[Zich]

Hey Marto,

If you could share slightly more information to set peoples mind at ease might be good and calm people down. We all understand delays, But maybe once ever couple working days you could come on here and post exactly what order date you have shipped between the last update and the time you make the post.

Something in the form of:

Hi postage update for the 4/01/2014

Posted all orders made on 1/12/2013
-------------------------------------

Hi postage update for the 7/01/2014

Posted all orders up to and including the 5/12/2013
----------------------------------------------------

Something like that small of an update will put a lot of people at ease. Most of your updates are very indecisive. If we have learnt anything from previous unmentioned companies indecisive is a very very bad thing for your reputation.


Thanks and we all hope to see your company improve through out the new year.

Tyler.

Sound like BFL Jody blog update 

[dave111223]

No product, no refund, no contact via website, no contact via forum post, no contact via PM.

What a joke of a company; time to open up a scam thread on these guys I think....warning people not to buy from this website.

[Zich]

Hi!
I have been trying to get a board working on my laptop (win7) but no luck so far.
edit: no LED is lighting up on the board the board is being powered by a corsair rm750 is this correct??

I have received the tplink router with technobit firmware and tomorrow I want to connect four boards to it.
Does anyone have a tutorial for how i should do this?
Do i have to change the fan that is supplied with boards?

Too bad if win 7 not working with you because it's the easiest way.

The TL-MR3020 come with ip 192.168.0.99. You need to configure password, ssh , date , time, timezone, then cgminer configuration or network if you want.
Do it all slowly, wait until all saving process done before closing browser tab.

The FAN is the best available now so no need to change unless you really need to.

[newminer1988]

Hi!
I have been trying to get a board working on my laptop (win7) but no luck so far.
edit: no LED is lighting up on the board the board is being powered by a corsair rm750 is this correct??

I have received the tplink router with technobit firmware and tomorrow I want to connect four boards to it.
Does anyone have a tutorial for how i should do this?
Do i have to change the fan that is supplied with boards?

Too bad if win 7 not working with you because it's the easiest way.

The TL-MR3020 come with ip 192.168.0.99. You need to configure password, ssh , date , time, timezone, then cgminer configuration or network if you want.
Do it all slowly, wait until all saving process done before closing browser tab.

The FAN is the best available now so no need to change unless you really need to.

Ah should be a piece of cake :S hehe
what should i use for ssh?

[acidfox]

Ah should be a piece of cake :S hehe
what should i use for ssh?

My choice is Kitty. http://www.9bis.net/kitty/?page=Download
It is a further development of Putty

[awgilyas]

Hey Marto,

If you could share slightly more information to set peoples mind at ease might be good and calm people down. We all understand delays, But maybe once ever couple working days you could come on here and post exactly what order date you have shipped between the last update and the time you make the post.

Something in the form of:

Hi postage update for the 4/01/2014

Posted all orders made on 1/12/2013
-------------------------------------

Hi postage update for the 7/01/2014

Posted all orders up to and including the 5/12/2013
----------------------------------------------------

Something like that small of an update will put a lot of people at ease. Most of your updates are very indecisive. If we have learnt anything from previous unmentioned companies indecisive is a very very bad thing for your reputation.


Thanks and we all hope to see your company improve through out the new year.

Tyler.

Sound like BFL Jody blog update 

That's better then total silence though. :/  Still waiting on my 3rd and 4th  Dec orders.

[Zich]

LOL, cgminer on TPLINK TL-MR3020 get angry when nanofury join the club

It did work when only HEX16A & HEX16u. HEX16A & HEX16C also good. But not HEX16A + HEX16u + HEX16C 

[J4bberwock]

Hi!
I have been trying to get a board working on my laptop (win7) but no luck so far.
edit: no LED is lighting up on the board the board is being powered by a corsair rm750 is this correct??

I have received the tplink router with technobit firmware and tomorrow I want to connect four boards to it.
Does anyone have a tutorial for how i should do this?
Do i have to change the fan that is supplied with boards?

Hi, I got an HEX16A by mistake instead of the HEX16A2 (btw, still waiting for an answer from technobit on this), but the green led only lights up when the board is hashing.
Not sure it's the same on hex16A2.

First, check in the device manager that the usb->com thing is detected and the driver installed. you can install it manuelly from there.

Also, try to restart the computer after adding the board the first time and installing the .inf file. One of the inf files doesn't work on my computer.

And try to put the same values that someone that have a working board with screenshots here.
On my computer, it's com3 or COM5. Default port speed is 9600, but you might want to check in the device manager and maybe change the value in device manager and/or hexminer.

I'll soon go the tplink route too. looks easy enough. I've seen one post here on how to update and set it up.

Still waiting for 4 HEX16A2 boards ordered on 1st of December. Advertised as 3-4 weeks from payment, if you look at the delay for people who ordered from BFL, it's not that bad to have 1 or 2 weeks delay, especially at this time of the year.
Of course, if it affects ROI, but if BTC goes up crazy like it did 2 monthes ago, We'll ROI even if the boards are 1 month late, and if BTC crashes tomorrow, most of us will never ROI, even if we received the boards within 3 weeks after payment.

But I agree that Marto could make less promises, do better customer service and that the informations on shipped or scheduled shipping could be better.
Let's hope that these are Technobit new year's resolutions.

[loshia]

LOL, cgminer on TPLINK TL-MR3020 get angry when nanofury join the club

It did work when only HEX16A & HEX16u. HEX16A & HEX16C also good. But not HEX16A + HEX16u + HEX16C 

Most probably because of the USB hub. Is it a tt one?
Lsusb -v?

[mudge]

Well got a shipping email today but no tracking number as yet.
Hope this is not a way to just avoid refunding me
Will keep you all informed

[stan258]

Well got a shipping email today but no tracking number as yet.
Hope this is not a way to just avoid refunding me
Will keep you all informed

What was your order date?


Edit - - -  I have tracking in the order section of the Technobit order section however USP does not have tracking info yet.  I slected UPS Express. Order Date December 1   

[joeventura]

No product, no refund, no contact via website, no contact via forum post, no contact via PM.

What a joke of a company; time to open up a scam thread on these guys I think....warning people not to buy from this website.

Where have you been??  MArto has been screwing people for months.

Started with his botched Group buys where he robbed folks (me included) for dozens of BTC

[stan258]

Order GHWBIIRZY was shipped speedy when I paid for UPS Express. 

[Bogart]

I just wanted to chime in and say that I'm still waiting to hear something about my 10 Chili boards.

The website says "Shipment up to 4 weeks after reciept of your chips".  Tracking shows they received my chips on 04-December.

I sent a forum PM and a message in my order history page on the website asking what's going on, and have not received a response.

 

[Zich]

Most probably because of the USB hub. Is it a tt one?
Lsusb -v?

yeah, tt one 

Code:

Bus 001 Device 021: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 022: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 001 Device 023: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 024: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 025: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo

[marto74]

I just wanted to chime in and say that I'm still waiting to hear something about my 10 Chili boards.

The website says "Shipment up to 4 weeks after reciept of your chips".  Tracking shows they received my chips on 04-December.

I sent a forum PM and a message in my order history page on the website asking what's going on, and have not received a response.

 

As far you know the boards are made by lucko and We are just putting asics and trough hole on them.
@ the moment lucko and Mr. Teal are solving a firmware isue

[loshia]

Most probably because of the USB hub. Is it a tt one?
Lsusb -v?

yeah, tt one 

Code:

Bus 001 Device 021: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 022: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 001 Device 023: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 024: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 025: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo

The black hub righ.? 10 ports?
You need the white one first chip should be 7 port tt
Anyway
Thank you for  the info