[ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin

[note235]

can anybody tell me why I get 0 WU using the sgminer?

[1715245351]

1715245351

[1715245351]

1715245351

[1715245351]

1715245351

[badman74]

can anybody tell me why I get 0 WU using the sgminer?

it looks like your diff is too high to get any shares
you will have to get shares for your WU to show
try a different pool and see if that helps

[coins101]

Can i use sgminer to mine maxcoin?

not positive but try -k Keccak

go to 1gh.com and download the miner from there. they did have a keccak miner for gpu's. it worked quite well, but haven't used it for a while

[N[e]wBie]

on two seperate pools with 280x I am getting ~ 2.1 MH/s but 0.037 / m WU , what is the problem?

[kocur]

does this work for heavycoin?

no

can you add it too ?

[laxduke]

Just donated 0.1BTC for further support of the sgminer
Keep up the good work 

[MarcusDe]

Could you please show me where in source and to what should I change DM_MODE for quarkcoin?

I want to try it on linux so that "dirty" .exe version wont work :-P

edit: ok, i figured it myself :-D

[badman74]

on two seperate pools with 280x I am getting ~ 2.1 MH/s but 0.037 / m WU , what is the problem?

its fine the low WU is because the shares are really small

[badman74]

Could you please show me where in source and to what should I change DM_MODE for quarkcoin?

I want to try it on linux so that "dirty" .exe version wont work :-P

I'd set up a pull request on git.

So the Source is on my git:

https://github.com/DJstone/sph-sgminer

use this one it is already changed

[MarcusDe]

Could you please show me where in source and to what should I change DM_MODE for quarkcoin?

I want to try it on linux so that "dirty" .exe version wont work :-P

I'd set up a pull request on git.

So the Source is on my git:

https://github.com/DJstone/sph-sgminer

use this one it is already changed

Thanks, I've made it other way (just DM_BITCOIN for quark), compiled both, both work, tyvm good sir!

[noobinscrypt]

Any good profit in any of these coins these days? got about 6mh/s scrypt i want to use on something else, only making 0.035 a day or so from middlecoin, unless i get a pumped scam coin.

[Lanc]

Hey everyone!

What settings do you use with DRK on R9 290/R9 290X?

I can't set Intensity more than 13 - instant driver error ;/ With I13 R9 290X only get 2MH/s ;/

[badman74]

Hey everyone!

What settings do you use with DRK on R9 290/R9 290X?

I can't set Intensity more than 13 - instant driver error ;/ With I13 R9 290X only get 2MH/s ;/

i have 2 saphire 290x
"intensity" : "18,20",
"worksize" : "256",
"kernel" : "darkcoin",
"lookup-gap" : "2",
"thread-concurrency" : "30592",
"shaders" : "2048,2048",
"gpu-engine" : "300-1000,300-1050",
"gpu-fan" : "45-100,45-100",
"gpu-memclock" : "1500,1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95,95",
"temp-overheat" : "92,92",
"temp-target" : "88,88",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"auto-gpu" : false,
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "30",
"temp-hysteresis" : "5",
"shares" : "0",
"kernel-path" : "/usr/local/bin"

sgminer 4.1.0-86-g6a61 - Started: [2014-03-16 12:46:29]
--------------------------------------------------------------------------------
(5s):5.426M (avg):5.396Mh/s | A:0  R:0  HW:0  WU:0.061/m
ST: 1  SS: 0  NB: 2  LW: 171  GF: 0  RF: 0
Connected to Pool 0 (stratum) diff 0.007 as user badman74.1
Block: 5fbca78b...  Diff:269  Started: [12:48:12]  Best share: 0.422
--------------------------------------------------------------------------------
 GPU 0:  92.0C 5203RPM | 2.552M/2.564Mh/s | R:  0.0% HW:0 WU:0.027/m I:18
 GPU 1:  86.0C 3805RPM | 2.868M/2.896Mh/s | R:  0.0% HW:0 WU:0.035/m I:20
--------------------------------------------------------------------------------
[12:47:20] Pool 0 difficulty changed to 0.007
[12:47:20] Accepted f7ea6ef3 Diff 0.004/0.004 GPU 0 at Pool 0
[12:47:31] Accepted 8dcfbbba Diff 0.007/0.007 GPU 1 at Pool 0
[12:47:34] Accepted 1f78aa21 Diff 0.032/0.007 GPU 0 at Pool 0
[12:47:35] Accepted 2d1e7ca0 Diff 0.022/0.007 GPU 1 at Pool 0
[12:47:39] Accepted 65237697 Diff 0.010/0.007 GPU 0 at Pool 0
[12:47:42] Accepted 535a5bc4 Diff 0.012/0.007 GPU 0 at Pool 0
[12:47:43] Accepted 8357a59b Diff 0.008/0.007 GPU 1 at Pool 0
[12:47:46] Accepted 4b91b959 Diff 0.013/0.007 GPU 1 at Pool 0
[12:48:00] Accepted 8c717784 Diff 0.007/0.007 GPU 1 at Pool 0
[12:48:07] Accepted 4f236ded Diff 0.013/0.007 GPU 0 at Pool 0
[12:48:12] Network diff set to 269
[12:48:12] Stratum from Pool 0 detected new block
[12:48:15] Accepted 48e35883 Diff 0.014/0.007 GPU 1 at Pool 0
[12:48:20] Accepted 55aa9541 Diff 0.012/0.007 GPU 0 at Pool 0
[12:48:33] Accepted 37301e0a Diff 0.018/0.007 GPU 0 at Pool 0
[12:48:37] Accepted 777fb4e6 Diff 0.008/0.007 GPU 0 at Pool 0
[12:48:39] Accepted 025e67e0 Diff 0.422/0.007 GPU 1 at Pool 0

[CostaDelSol]

Hey everyone!

What settings do you use with DRK on R9 290/R9 290X?

I can't set Intensity more than 13 - instant driver error ;/ With I13 R9 290X only get 2MH/s ;/

My current parameters :

-I 24,24 -g 2,2 -w 237,234 --lookup-gap 2,2 --gpu-powertune 50,50 --no-submit-stale --gpu-memclock 1500,1500 --gpu-engine 1100,1100 --thread-concurrency 27500,25000 --temp-target 91 --temp-overheat 93 --temp-cutoff 99 --auto-fan --gpu-fan 0-100

First card is a 290 and second is a 290X.

[swaakx]

I'd set up a pull request on git.

So the Source is on my git:

https://github.com/DJstone/sph-sgminer

I applied your mod manually to the original sph-sgminer I have checkout on my xubuntu mining rig and it's working properly with MPOS based pools that was previously rejecting my shares with quarkcoin kernel or with qubitcoin kernel. Thanks a lot !

Code:

sgminer 4.1.0-85-gccc7d-dirty - Started: [2014-03-16 00:24:30]
--------------------------------------------------------------------------------
(5s):19.60M (avg):19.56Mh/s | A:137  R:1  HW:0  WU:0.273/m
ST: 3  SS: 1  NB: 1040  LW: 74215  GF: 1  RF: 0
Connected to Pool 0 (stratum) diff 0.049 as user youllneverknow.1
Block: 1e64fda1...  Diff:1.56K  Started: [08:48:53]  Best share: 114
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  71.0C 1474RPM | 4.901M/4.892Mh/s | R:  1.1% HW:0 WU:0.068/m I:13
 GPU 1:  65.0C 1433RPM | 4.904M/4.892Mh/s | R:  0.5% HW:0 WU:0.068/m I:13
 GPU 2:  62.0C 1490RPM | 4.886M/4.889Mh/s | R:  0.7% HW:0 WU:0.068/m I:13
 GPU 3:  67.0C 1463RPM | 4.903M/4.890Mh/s | R:  1.0% HW:0 WU:0.068/m I:13
--------------------------------------------------------------------------------
[08:47:35] Pool 0 difficulty changed to 0.020
[08:47:35] Accepted 70190c1a Diff 0.009/0.004 GPU 2
[08:47:35] Accepted a36d2938 Diff 0.006/0.004 GPU 1
[08:47:35] Accepted e38978dd Diff 0.004/0.004 GPU 0
[08:47:35] Accepted c054be49 Diff 0.005/0.004 GPU 0
[08:47:35] Accepted 52397311 Diff 0.012/0.004 GPU 1
[08:47:35] Accepted 4d1ef28a Diff 0.013/0.004 GPU 0
[08:47:35] Accepted 2058fdcd Diff 0.031/0.004 GPU 1
[08:47:37] Accepted 25deddb0 Diff 0.026/0.020 GPU 3
[08:47:38] Accepted 11cc842d Diff 0.056/0.020 GPU 2
[08:47:38] Accepted 07001512 Diff 0.143/0.020 GPU 0
[08:47:44] Accepted 1a4588a9 Diff 0.038/0.020 GPU 0
[08:47:49] Accepted 32017447 Diff 0.020/0.020 GPU 0

[MarcusDe]

Any plans for adding heavycoin before cudaminer? :-)

[isaevski]

Please, add AnimeCoin support. 

[badman74]

Any plans for adding heavycoin before cudaminer? :-)

Please, add AnimeCoin support. 

it doesn't look like phm plans to add anymore algos at the moment

i took a shot at animecoin but i am not sure how exactly to build the animecoin.cl file as it isn't as easy as just moving the bmw.cl code above the blake.cl code....

[badman74]

Performance:

• DRK ~2.5 MH/s on R9 290

Example usage - DarkCoin:

Code:

GPU_MAX_ALLOC_PERCENT=100 ./sgminer -k darkcoin -o <host>:<port> -u <user> -p <password> -I 18 -g 4 -w 128

Realy dont know how you get that.  
I have with same setting
72.0C 1998RPM | 2.040M/2.052Mh/s | R:  0.0% HW:0 WU:0.027/m I:18

witch driver version do you use please.

"intensity" : "18,20",
"worksize" : "256",
"kernel" : "darkcoin",
"lookup-gap" : "2",
"thread-concurrency" : "30592",
"shaders" : "2048,2048",
"gpu-engine" : "300-1000,300-1050",
"gpu-fan" : "45-100,45-100",
"gpu-memclock" : "1500,1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95,95",
"temp-overheat" : "92,92",
"temp-target" : "88,88",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"auto-gpu" : false,
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "30",
"temp-hysteresis" : "5",
"shares" : "0",
"kernel-path" : "/usr/local/bin"

driver 13.2
2 sapphire r9 290x
gets me 2.6mh/6 and 2.85mh/s

[creamynebula]

phm can you include in the original post what was the last day the software AND the compiled binaries were updated? so I can just check the thread each time to see if im in the most recent version