[ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin

[badman74]

Ive been mining Bitquark for about a month using this miner. At first i had no HW errors at all, for probably about two weeks. Now after a hand full of hours of mining i will start getting lots of HW errors and have to restart the program. Ive been using the same command to mind and i dont believe i am overdoing it. I pretty much use the recommended command. Could this be anything i am doing wrong or is my GPU just starting to bite the dust?

sgminer -k quarkcoin -o p2pool.altcryptomining.com:8112 -u address -p anything -I 16 -g 4 -w 64

Try building from
https://github.com/badman74

[1714130629]

1714130629

[1714130629]

1714130629

[1714130629]

1714130629

[3ds]

Here is phm's newest build
https://mega.co.nz/#!vZAQwaob!MBbM81RRQUNUB6d1jgJCT7olfmCvkUH_lQSy4tYttV4
It has fuguecoin algo added

Are these hashes ok?

sha256: 67d8df4ab2c097ff5ff299e28959d1ca44a16d79e933c09223de5ee0f7eadae8
sha1: f4bd96f27cad5ea77f415dff838287631079c6ad
md5: 7d94d808c75b2a5c72b324c79a579e15

[mahowi]

what is the best rate on darkcoin should I get on 7950? mine is 1.8 Mh/s

I'm getting ~1.9 Mh/s with these settings:

Code:

"intensity" : "18,18",
"worksize" : "256,256",
"kernel" : "darkcoin",
"lookup-gap" : "2,2",
"thread-concurrency" : "24000,24000",
"shaders" : "1792,1792",
"gpu-engine" : "1100,1100",
"gpu-memclock" : "1500,1500",
"gpu-powertune" : "20,20",
"gpu-vddc" : "1.056,1.094"

[badman74]

Here is phm's newest build
https://mega.co.nz/#!vZAQwaob!MBbM81RRQUNUB6d1jgJCT7olfmCvkUH_lQSy4tYttV4
It has fuguecoin algo added

Are these hashes ok?

sha256: 67d8df4ab2c097ff5ff299e28959d1ca44a16d79e933c09223de5ee0f7eadae8
sha1: f4bd96f27cad5ea77f415dff838287631079c6ad
md5: 7d94d808c75b2a5c72b324c79a579e15

ehhh? not sure what you are asking

[guessren]

Here is phm's newest build
https://mega.co.nz/#!vZAQwaob!MBbM81RRQUNUB6d1jgJCT7olfmCvkUH_lQSy4tYttV4
It has fuguecoin algo added

Are these hashes ok?

sha256: 67d8df4ab2c097ff5ff299e28959d1ca44a16d79e933c09223de5ee0f7eadae8
sha1: f4bd96f27cad5ea77f415dff838287631079c6ad
md5: 7d94d808c75b2a5c72b324c79a579e15

Can't download,have error

[badman74]

Here is phm's newest build
https://mega.co.nz/#!vZAQwaob!MBbM81RRQUNUB6d1jgJCT7olfmCvkUH_lQSy4tYttV4
It has fuguecoin algo added

Are these hashes ok?

sha256: 67d8df4ab2c097ff5ff299e28959d1ca44a16d79e933c09223de5ee0f7eadae8
sha1: f4bd96f27cad5ea77f415dff838287631079c6ad
md5: 7d94d808c75b2a5c72b324c79a579e15

Can't download,have error

here is more links
https://drive.google.com/file/d/0B8NA-05oUjR8bWx1SWk5anVxMmM/edit?usp=sharing
https://dl.dropboxusercontent.com/s/871zrxxpdq7byu6/sgminer%5BDRK_Q2C_QRK_MYR_FC%5D.rar?dl=1&token_hash=AAE-uOuOPGQWF2zlPBSZK145mKfXkPjZmqSvwmYY-GBNqw

[badman74]

new build with INK and ANI
https://www.dropbox.com/s/2ft0rbahp1yx53o/sgminer%5BDRK_Q2C_QRK_MYR_FC_INK_ANI%5D.rar
https://mega.co.nz/#!6RhCkTyZ!vjKvleVVGWCOn4a_8myMEBw45-KaESIYzXOj-we0uZQ
https://drive.google.com/file/d/0B8NA-05oUjR8bENkV29mTjFBa1k/edit?usp=sharing
and also my modded binaries are here
https://github.com/badman74/Binaries

[badman74]

Hello, yesterday I migrate from BAMT 1.1 to BAMT 1.6 to try Darkcoin mining. Configure my BAMT like before - i had enough experience with Linux and mining but have trouble start mining Darkcoin. With default cgminer there are no problems at all - it mines like in older version, but when change the bamt.conf to sgminer-sph i get:

Started sgminer 4.1.0-85-gccc7d
Loaded configuration file /etc/bamt/sgminer-sph.conf
Kernel darkcoin is experimental.
Error -11: Building Program (clBuildProgram)
Error compiling program for search.
Frontend phase failed compilation.
Error: Creating kernel search failed!

Failed to init GPU thread 0, disabling device 0
Restarting the GPU from the menu will not fix this.
Try restarting sgminer.

In "sgminer-sph.conf" i change only the pool/worker data. In bamt.conf - stop cgminer with "#cgminer_opts: --api-listen --config /etc/bamt/cgminer.conf", and set: cgminer_opts: --api-listen --config /etc/bamt/sgminer-sph.conf miner-sgminer-sph: 1

I read in here:
"Error -11: Building Program (clBuildProgram) - execute miner from the directory where "kernel" directory is present"
and start mining process from the console with:

export DISPLAY=:0
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_ALLOC_PERCENT=100
./sgminer --kernel darkcoin -o stratum+tcp://stratum1.suchpool.pw:3335 -u xxxxx.1 -p xxxx

with no options just to check if the mining process will start at any kH/s. The console returns:
Started sgminer 4.1.0-85-gccc7d
Kernel darkcoin is experimental.Killed

It takes about 1 or 2 minutes between start and error (kill) of the mining process.

Where can i find a solution of my problem, thanks in advance.
I mine with one HD6950.

sounds like the kernel path is messed up or something

Edit: also it defaults to thread-congurency 6016
So maybe try setting it manually to something lower will help

Last night i recompile the sgminer-sph:
------------------------------------------------------------------------
sgminer 4.1.0
------------------------------------------------------------------------


Configuration Options Summary:

  Use git version......: yes
  libcurl(GBT+getwork).: Enabled: -lcurl
  curses.TUI...........: FOUND: -lncurses
  OpenCL...............: FOUND. GPU mining support enabled
  ADL..................: SDK found, GPU monitoring support enabled

Compilation............: make (or gmake)
  CPPFLAGS.............:
  CFLAGS...............: -g -O2
  LDFLAGS..............:  -lpthread
  LDADD................: -ldl -lcurl   compat/jansson-2.5/src/.libs/libjansson.a -lpthread -L/opt/AMDAPP/lib/x86 -lOpenCL    -lm -lrt

Installation...........: make install (as root if needed, with 'su' or 'sudo')
  prefix...............: /usr/local

and no change with my problem (maybe if i change some flags in ./configure script?) - is there any other software or version for mining darkcoins in Linux?

try
CFLAGS="-O2 -Wall -march=native" ./configure --enable-opencl
also if you are using bamt check this link
http://www.reddit.com/r/BAMT/comments/207rdz/release_bamt_v160_scrypt_scryptn_darkcoin/
also
https://bitcointalk.org/index.php?topic=475795.msg5487088#msg5487088

[restless]

Can someone help with Fugue mining?

Trying it vs fugue pool stratum+tcp://fc.minepool.cc:10029 I always get "Share above target". Cpu miner works fine on same pool
Cards are 6xxx

[ol92]

Can someone help with Fugue mining?

Trying it vs fugue pool stratum+tcp://fc.minepool.cc:10029 I always get "Share above target". Cpu miner works fine on same pool
Cards are 6xxx

This pool does not work with gpu miner for now... waiting for an other pool...

[badman74]

Can someone help with Fugue mining?

Trying it vs fugue pool stratum+tcp://fc.minepool.cc:10029 I always get "Share above target". Cpu miner works fine on same pool
Cards are 6xxx

try this binary
https://github.com/badman74/Binaries
or if you want to compile yourself
https://github.com/badman74/sph-sgminer

[restless]

Thats exactly the version I'm trying.
Its working against local host for solo mining, or at least it seems to work

PS:
Tried ANI(ink) core - it works against megapool, but against http://ani.minepool.cc - again Share above target and worker is soon banned

[badman74]

Thats exactly the version I'm trying.
Its working against local host for solo mining, or at least it seems to work

PS:
Tried ANI(ink) core - it works against megapool, but against http://ani.minepool.cc - again Share above target and worker is soon banned

Hmm try on a p2pool if they have one

[restless]

yup megapool is p2p pool for Ani, and it accepts shares... maybe these pools expect somehow modified... "headers" ?

PS: see below, no pool accepts shares from client

[restless]

What a mess...

atm i have at least 4 different builds of this sgminer... and the build named
4.1.0-93-ga0c0 is fastest, best working with ANI. It also correctly displays accepted/rejected shares (ok, its way more verbose, but still it shows numbers). It also seems to change Intensity by itself from time to time :O



PS:
All versions that I have DO NOT work with ANI pools.
Even when they write "accepted", in fact all shares are "above target", whatever that means

[lordbah]

Getting segmentation fault right after starting sgminer.
Version 4.1.0-93-ga0c0-dirty from prettyhatemachine compiled from source on Ubuntu 11.10 32-bit.
I couldn't use a newer Ubuntu because the Catalyst stuff wouldn't rebuild - something about create_proc_entry() wrong. From what I read, they aren't keeping up-to-date, and I needed to go back to Linux kernel <= 3.4 (!).
Frankly I'm confused about what-all versions of everything I need.
Graphics card is AMD/ATI R600 Radeon HD 2900 PRO/XT.
I wound up installing Catalyst 13.1 == fglrx 8.970, and AMD_APP_SDK 2.9, and ADL_SDK 6.0.

Any advice?
--
Apparently it's in the opencl_drv.drv_detect(false) call. Call stack is a bunch of offsets in libamdocl32.so.

[azhago]

What a mess...

atm i have at least 4 different builds of this sgminer... and the build named
4.1.0-93-ga0c0 is fastest, best working with ANI. It also correctly displays accepted/rejected shares (ok, its way more verbose, but still it shows numbers). It also seems to change Intensity by itself from time to time :O



PS:
All versions that I have DO NOT work with ANI pools.
Even when they write "accepted", in fact all shares are "above target", whatever that means

What are ANI and INK algo ?
Wich coin use them ?

[badman74]

What a mess...

atm i have at least 4 different builds of this sgminer... and the build named
4.1.0-93-ga0c0 is fastest, best working with ANI. It also correctly displays accepted/rejected shares (ok, its way more verbose, but still it shows numbers). It also seems to change Intensity by itself from time to time :O



PS:
All versions that I have DO NOT work with ANI pools.
Even when they write "accepted", in fact all shares are "above target", whatever that means

hmm that is odd
ANI is working perfectly for me on CPU Pool, ZCoins P2Pool, and Solo
edit: my latest build is sgminer 4.1.0-96-gd5da

[badman74]

What a mess...

atm i have at least 4 different builds of this sgminer... and the build named
4.1.0-93-ga0c0 is fastest, best working with ANI. It also correctly displays accepted/rejected shares (ok, its way more verbose, but still it shows numbers). It also seems to change Intensity by itself from time to time :O



PS:
All versions that I have DO NOT work with ANI pools.
Even when they write "accepted", in fact all shares are "above target", whatever that means

What are ANI and INK algo ?
Wich coin use them ?

ANI is Animecoin (-k animecoin to use) https://bitcointalk.org/index.php?topic=423339.0
INK is INKcoin (-k inkcoin to use) https://bitcointalk.org/index.php?topic=481516.0

[azhago]

thanks