j4r3k
Newbie
Offline
Activity: 33
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 07:33:36 AM |
|
Tryied that already, I run: sgminer alone with -T. What info do you need?
|
|
|
|
The Seeker
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 09:34:24 AM |
|
Hello, yesterday I migrate from BAMT 1.1 to BAMT 1.6 to try Darkcoin mining. Configure my BAMT like before - i had enough experience with Linux and mining but have trouble start mining Darkcoin. With default cgminer there are no problems at all - it mines like in older version, but when change the bamt.conf to sgminer-sph i get:
Started sgminer 4.1.0-85-gccc7d Loaded configuration file /etc/bamt/sgminer-sph.conf Kernel darkcoin is experimental. Error -11: Building Program (clBuildProgram) Error compiling program for search. Frontend phase failed compilation. Error: Creating kernel search failed!
Failed to init GPU thread 0, disabling device 0 Restarting the GPU from the menu will not fix this. Try restarting sgminer.
In "sgminer-sph.conf" i change only the pool/worker data. In bamt.conf - stop cgminer with "#cgminer_opts: --api-listen --config /etc/bamt/cgminer.conf", and set: cgminer_opts: --api-listen --config /etc/bamt/sgminer-sph.conf miner-sgminer-sph: 1
I read in here: "Error -11: Building Program (clBuildProgram) - execute miner from the directory where "kernel" directory is present" and start mining process from the console with:
export DISPLAY=:0 export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 ./sgminer --kernel darkcoin -o stratum+tcp://stratum1.suchpool.pw:3335 -u xxxxx.1 -p xxxx
with no options just to check if the mining process will start at any kH/s. The console returns: Started sgminer 4.1.0-85-gccc7d Kernel darkcoin is experimental.Killed
It takes about 1 or 2 minutes between start and error (kill) of the mining process.
Where can i find a solution of my problem, thanks in advance. I mine with one HD6950.
sounds like the kernel path is messed up or something Edit: also it defaults to thread-congurency 6016 So maybe try setting it manually to something lower will help Last night i recompile the sgminer-sph: ------------------------------------------------------------------------ sgminer 4.1.0 ------------------------------------------------------------------------ Configuration Options Summary: Use git version......: yes libcurl(GBT+getwork).: Enabled: -lcurl curses.TUI...........: FOUND: -lncurses OpenCL...............: FOUND. GPU mining support enabled ADL..................: SDK found, GPU monitoring support enabled Compilation............: make (or gmake) CPPFLAGS.............: CFLAGS...............: -g -O2 LDFLAGS..............: -lpthread LDADD................: -ldl -lcurl compat/jansson-2.5/src/.libs/libjansson.a -lpthread -L/opt/AMDAPP/lib/x86 -lOpenCL -lm -lrt Installation...........: make install (as root if needed, with 'su' or 'sudo') prefix...............: /usr/local and no change with my problem (maybe if i change some flags in ./configure script?) - is there any other software or version for mining darkcoins in Linux? try CFLAGS="-O2 -Wall -march=native" ./configure --enable-opencl also if you are using bamt check this link http://www.reddit.com/r/BAMT/comments/207rdz/release_bamt_v160_scrypt_scryptn_darkcoin/also https://bitcointalk.org/index.php?topic=475795.msg5487088#msg5487088I switch to SMOS, upgrade the sgminer to the latest version and it works ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) HD 6950 with few changes in conf file i get ~1500 KH/s ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) , temp get down on ~64 oC and maybe the power consumption - i will measure it today. With higher intensity i get it to work at 1800KH/s but no need to over force it that much ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) .
|
|
|
|
boubou
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 09:54:03 AM |
|
I assume you also have R9 290?
Comme on, it's a 60 Darkcoin bounty and some other guy propose to put Darkcoin in the pot too.
Yes, I've three rigs with 290s and each suffers from the same problem. I checked for any option related to sleep mode, dpms, but both are disabled by default in BAMT 1.6 . Others have the same problem with the windows 7 build of that miners... This bug is incredible. Near all the 290 miners are stuck with poor hashrate because of that. For bug-finders: I have 2 others 290 on windows that did not suffer the bug (except from very rare occasion) but they are watercooled. Is it possible that the Darkcoin algo make some part of the card too hot, or too something, and that some part of the card are disabled? Again: in scrypt/keccak/Scrypt-jane there is no problem.
|
BEHNZiP6UZunp41vurNaQi4r2hvgG57yzi : BdG
|
|
|
Gazza1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 10:17:24 AM |
|
This new way of mining is truly spectacular!!
|
Impossible is a word found only in the dictionary of fools.
|
|
|
DJstone
Newbie
Offline
Activity: 37
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 11:29:26 AM |
|
I assume you also have R9 290?
Comme on, it's a 60 Darkcoin bounty and some other guy propose to put Darkcoin in the pot too.
Yes, I've three rigs with 290s and each suffers from the same problem. I checked for any option related to sleep mode, dpms, but both are disabled by default in BAMT 1.6 . Others have the same problem with the windows 7 build of that miners... This bug is incredible. Near all the 290 miners are stuck with poor hashrate because of that. For bug-finders: I have 2 others 290 on windows that did not suffer the bug (except from very rare occasion) but they are watercooled. Is it possible that the Darkcoin algo make some part of the card too hot, or too something, and that some part of the card are disabled? Again: in scrypt/keccak/Scrypt-jane there is no problem. Hello guys, would u mind testing my binarys for sgminer? I've changed something and merged with the latest sgminer from veox. Here is the commit message: This commit is the product of merging veox latest commit (atm 1f7b7ef)…
… with sph-sgminer (atm fe522a6).
Successfully build and tested successfully on: Quarkcoin (Fully compatible imho), Animecoin (Fully compatible imho), Fuguecoin (Fully compatible imho), Darkcoin (Some problems in calculation BlockDiff and Target as well as sharediff and target imho), Scrypt is not working at the moment. I'll still have to check those other coins. nFactor has to be merged.Here is the git repo with branch pointed to the merge: https://github.com/DJstone/sph-sgminer/commits/sph-merge-veoxHere is the Binarys: http://ul.to/9o7ujsodNOTE: IT IS STILL NOT STABLE!
|
|
|
|
iikun
Legendary
Offline
Activity: 1062
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 12:09:39 PM |
|
I assume you also have R9 290?
Comme on, it's a 60 Darkcoin bounty and some other guy propose to put Darkcoin in the pot too.
Yes, I've three rigs with 290s and each suffers from the same problem. I checked for any option related to sleep mode, dpms, but both are disabled by default in BAMT 1.6 . Others have the same problem with the windows 7 build of that miners... This bug is incredible. Near all the 290 miners are stuck with poor hashrate because of that. For bug-finders: I have 2 others 290 on windows that did not suffer the bug (except from very rare occasion) but they are watercooled. Is it possible that the Darkcoin algo make some part of the card too hot, or too something, and that some part of the card are disabled? Again: in scrypt/keccak/Scrypt-jane there is no problem. I've been mining sph sgminer on win8 for a few hours now with 1x R9 290 reference model with no such drop in hash & they are not watercooled. Rock steady at 2.41MHs. I'm happy to help if you'd like to know anything about config etc. My only issue is that the expected Darkcoin per day is abysmal :/ Approx 1.1coins..hardly seems worth it
|
|
|
|
whocares
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 12:32:11 PM |
|
I didn't find obvious reason for this issue.
Why does this happen after a certain time - approx. 10 min ?
My rigs specs - MB Asrock H61 Pro BTC, G1620 2.7, 4Gb DDR3, 4Gb Flash drive, EVGA SuperNOVA 1000 Platinum, BAMT 1.6 OS, Catalyst 13.12 WHQL.
|
|
|
|
kache
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 140
Merit: 100
Bored
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 02:26:28 PM |
|
Could you please add a Adaptive NScrypt kernel as well, please? This version of sgminer does pretty much all algos, only Adaptive Nscrypt missing. ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Also, question, can I mix different algos for different pools? in the same .bat? get it from the github link in my sig no you cant mix algo in one .bat at the moment, i'll look into it when i have time I don't see the adaptive nscrypt kernel in your github. ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Regarding the multiple kernels in the same bat, is it possible to also have some kind of auto-detect that automatically switches kernel depending on the algo the pool is reporting? ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
kache
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 140
Merit: 100
Bored
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 02:29:26 PM |
|
For bug-finders: I have 2 others 290 on windows that did not suffer the bug (except from very rare occasion) but they are watercooled. Is it possible that the Darkcoin algo make some part of the card too hot, or too something, and that some part of the card are disabled? Again: in scrypt/keccak/Scrypt-jane there is no problem.
VRM temps seem fine: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FxLF5AJ4.jpg&t=665&c=6npgvw6mvi-oYw) I wonder if the guys at guru3d would be willing to do a thermal check using their camera for this algo, see if there is any part of that card that overheats. ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
|
flipme
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 02:30:14 PM |
|
I'm doing Darkcoin since yesterday and I already enjoy the silence and lack of heat mining X11.
Works so far, I've installed it in BAMT/SMOS with fglrx 13.25.5 I stripped BAMT off most services, like the web interface and munin/nagios. Just left mother running.
But:
- Sapphire R9 290 Tri-X OC - can't get them above 2,2 Mhash, tried settings for hours - I also see the 10% drop reported after a while - Temp and fanspeed are not displayed
I'm reluctant to try Catalyst 14, since it throttles the GPU frequency.
|
|
|
|
kache
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 140
Merit: 100
Bored
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 02:32:22 PM |
|
I've been mining sph sgminer on win8 for a few hours now with 1x R9 290 reference model with no such drop in hash & they are not watercooled. Rock steady at 2.41MHs. I'm happy to help if you'd like to know anything about config etc.
My only issue is that the expected Darkcoin per day is abysmal :/ Approx 1.1coins..hardly seems worth it
Same for Hiro: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F44fjkn3.jpg&t=665&c=zRNfIqX6ipjHng) Gigabyte R9 290 WF3 12 hours mining, no drop in hashrate. And the profits are acceptable (0.003btc in 12 hours, so 0.006btc in 24 hours, but at a much lower power consumption, wear and tear than the 0.01 Adaptive Nscrypt Spaincoin/Rotocoin).
|
|
|
|
pallas
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 02:51:16 PM |
|
- Sapphire R9 290 Tri-X OC - can't get them above 2,2 Mhash, tried settings for hours - I also see the 10% drop reported after a while - Temp and fanspeed are not displayed
I'm reluctant to try Catalyst 14, since it throttles the GPU frequency.
I still can't do more that 500Kh with my 290, so you're lucky ;-) To disable frequency throttling, try this tool: http://epixoip.github.io/od6config/
|
|
|
|
flipme
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 03:38:37 PM |
|
- Sapphire R9 290 Tri-X OC - can't get them above 2,2 Mhash, tried settings for hours - I also see the 10% drop reported after a while - Temp and fanspeed are not displayed
I'm reluctant to try Catalyst 14, since it throttles the GPU frequency.
I still can't do more that 500Kh with my 290, so you're lucky ;-) To disable frequency throttling, try this tool: http://epixoip.github.io/od6config/Sounds good, I'll give it a try tonight. 500k is indeed very poor, how comes?
|
|
|
|
pallas
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 03:43:29 PM |
|
- Sapphire R9 290 Tri-X OC - can't get them above 2,2 Mhash, tried settings for hours - I also see the 10% drop reported after a while - Temp and fanspeed are not displayed
I'm reluctant to try Catalyst 14, since it throttles the GPU frequency.
I still can't do more that 500Kh with my 290, so you're lucky ;-) To disable frequency throttling, try this tool: http://epixoip.github.io/od6config/Sounds good, I'll give it a try tonight. 500k is indeed very poor, how comes? I really don't know: tried all possible settings, asked for help everywere, nothing. On the same rig a good old 7950 can easily do 3 times more. I can only think of a driver (fglrx) problem, even though the card is fine mining other algos.
|
|
|
|
badman74
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 05:10:13 PM |
|
Could you please add a Adaptive NScrypt kernel as well, please? This version of sgminer does pretty much all algos, only Adaptive Nscrypt missing. ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Also, question, can I mix different algos for different pools? in the same .bat? get it from the github link in my sig no you cant mix algo in one .bat at the moment, i'll look into it when i have time I don't see the adaptive nscrypt kernel in your github. ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Regarding the multiple kernels in the same bat, is it possible to also have some kind of auto-detect that automatically switches kernel depending on the algo the pool is reporting? ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) To use nscript you need to add "algorithm" : "nscrypt" to your .conf or --algorithm nscrypt See ./doc/configuration.md My github https://github.com/badman74
|
|
|
|
Ardolafat
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 05:47:54 PM |
|
The summer is going to be cooler with new algos. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I really should'nt tell this little secret, but i dont have much hashpower, so i would not loose much... ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) Old 5850's and others ati are very good for groestl and myriad groestl/sha256 but here is simple key to get more hashpower: Downclock the memory to 600/300 Mhz With downclocked memory you can overclock gpu more than usual. You can set the the memory freq equal to its idle speed for your videocard, this should work with any Ati/AMD GPU. Here is sample for 5850(Mem@600, GPU@900 ), groestl gives 10% more Mhashes with this tweak: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimagizer.imageshack.us%2Fv2%2F1013x323q90%2F819%2Fodv1.jpg&t=665&c=3vIML6wcHrTcJQ) Dont forget to monitor your temps ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) This might be helpfull for other algos if they do not use memory much. BTC wallet for donations: 13iPtwVj4JyBazyUhEu8rLCrc7coY8RYBe
|
|
|
|
minedout
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 06:46:11 PM |
|
I have this really odd problem with sgminer. (4.0 and 4.1)
I have two identical GPU's. No matter what, the 2nd GPU is slower than the first GPU.....
UNLESS, I am playing a youtube video, and then the 2nd GPU hash rate creeps up and matches the first.
What the heck is going on?
(and yes, for a month or two with sgminer, I have been playing youtube videos on replay lol)
|
|
|
|
boubou
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 07:21:41 PM |
|
I assume you also have R9 290?
Comme on, it's a 60 Darkcoin bounty and some other guy propose to put Darkcoin in the pot too.
Yes, I've three rigs with 290s and each suffers from the same problem. I checked for any option related to sleep mode, dpms, but both are disabled by default in BAMT 1.6 . Others have the same problem with the windows 7 build of that miners... This bug is incredible. Near all the 290 miners are stuck with poor hashrate because of that. For bug-finders: I have 2 others 290 on windows that did not suffer the bug (except from very rare occasion) but they are watercooled. Is it possible that the Darkcoin algo make some part of the card too hot, or too something, and that some part of the card are disabled? Again: in scrypt/keccak/Scrypt-jane there is no problem. I've been mining sph sgminer on win8 for a few hours now with 1x R9 290 reference model with no such drop in hash & they are not watercooled. Rock steady at 2.41MHs. I'm happy to help if you'd like to know anything about config etc. My only issue is that the expected Darkcoin per day is abysmal :/ Approx 1.1coins..hardly seems worth it Could you try to use BAMT 1.6 on an USB to see if the problem is system related? The best scenario would be that yo see no drop in Windows 8.1 and a drop in BAMT 1.6
|
BEHNZiP6UZunp41vurNaQi4r2hvgG57yzi : BdG
|
|
|
boubou
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 07:22:30 PM |
|
I've been mining sph sgminer on win8 for a few hours now with 1x R9 290 reference model with no such drop in hash & they are not watercooled. Rock steady at 2.41MHs. I'm happy to help if you'd like to know anything about config etc.
My only issue is that the expected Darkcoin per day is abysmal :/ Approx 1.1coins..hardly seems worth it
Same for Hiro: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F44fjkn3.jpg&t=665&c=zRNfIqX6ipjHng) Gigabyte R9 290 WF3 12 hours mining, no drop in hashrate. And the profits are acceptable (0.003btc in 12 hours, so 0.006btc in 24 hours, but at a much lower power consumption, wear and tear than the 0.01 Adaptive Nscrypt Spaincoin/Rotocoin). Could you try to use BAMT 1.6 on an USB to see if the problem is system related? The best scenario would be that yo see no drop in Windows 8.1 and a drop in BAMT 1.6
|
BEHNZiP6UZunp41vurNaQi4r2hvgG57yzi : BdG
|
|
|
kache
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 140
Merit: 100
Bored
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2014, 07:56:48 PM |
|
I have this really odd problem with sgminer. (4.0 and 4.1)
I have two identical GPU's. No matter what, the 2nd GPU is slower than the first GPU.....
UNLESS, I am playing a youtube video, and then the 2nd GPU hash rate creeps up and matches the first.
What the heck is going on?
(and yes, for a month or two with sgminer, I have been playing youtube videos on replay lol)
http://www.tomshardware.co.uk/faq/id-1904869/disable-ulps-amd-crossfire-setups.html
|
|
|
|
|