Miner Addict
Newbie
Offline
Activity: 31
Merit: 0
|
|
April 14, 2019, 11:35:44 AM |
|
This is my lighter timing, hopefully stable: --CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
please test it.
What about Vega 56 Samsung and Hynix ?
|
|
|
|
kamisama233
Newbie
Offline
Activity: 42
Merit: 0
|
|
April 14, 2019, 11:38:53 AM |
|
This is my lighter timing, hopefully stable: --CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
please test it.
51.72 on PM4.2C VEGA56@64BIOS CORE:1100,875, MEM:1100,875 samsung memory?
|
|
|
|
Miner Addict
Newbie
Offline
Activity: 31
Merit: 0
|
|
April 14, 2019, 11:48:40 AM |
|
This is my lighter timing, hopefully stable: --CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
please test it.
latest 19.4.1 drivers. win10 vega64 lc ~1360/1100@875 51.4mhs with claymore 12. But hbm temp is hot 70C and one weaker vega gives sometimes red incorrect shares 22.3 kh/s trtl, testing for pool speed and hw errors Power Consumption at HW info ?
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
April 14, 2019, 11:50:05 AM |
|
This is my lighter timing, hopefully stable: --CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
please test it.
latest 19.4.1 drivers. win10 vega64 lc ~1360/1100@875 51.4mhs with claymore 12. But hbm temp is hot 70C and one weaker vega gives sometimes red incorrect shares 22.3 kh/s trtl, testing for pool speed and hw errors Power Consumption at HW info ? 150 for eth and 135 for trtl
|
|
|
|
mZoleee
Newbie
Offline
Activity: 6
Merit: 0
|
|
April 14, 2019, 03:25:15 PM |
|
Anyone can helping for me? I have two RX580 (Asus ROG-STRIX o8g and Asus Dual-OC-4g), and I dont know how to do it... GPU 0: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] pci:0000:01:00.0 CAS CL: 23 W2R: 16 CCDS: 5 CCLD: 2 R2W: 28 NOPR: 0 NOPW: 0 RAS RC: 70 RRD: 6 RCDRA: 26 RCDR: 26 RCDWA: 21 RCDW: 21 MISC RFC: 192 TRP: 26 RP_RDA: 29 RP_WRA: 62 MISC2 WDATATR: 0 T32AW: 0 CRCWL: 25 CRCRL: 3 FAW: 0 PA2WDATA: 0 PA2RDATA: 0 DRAM1 RASMACTWR: 6 RASMACTRD: 5 ACTWR: 2 ACTRD: 3 DRAM2 RAS2RAS: 3 RP: 2 WRPLUSRP: 5 BUS_TURN: 6
GPU 1: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] pci:0000:04:00.0 CAS CL: 20 W2R: 15 CCDS: 5 CCLD: 2 R2W: 26 NOPR: 0 NOPW: 0 RAS RC: 60 RRD: 5 RCDRA: 22 RCDR: 24 RCDWA: 13 RCDW: 12 MISC RFC: 97 TRP: 22 RP_RDA: 24 RP_WRA: 44 MISC2 WDATATR: 0 T32AW: 0 CRCWL: 22 CRCRL: 3 FAW: 0 PA2WDATA: 0 PA2RDATA: 0 DRAM1 RASMACTWR: 25 RASMACTRD: 22 ACTWR: 10 ACTRD: 13 DRAM2 RAS2RAS: 13 RP: 10 WRPLUSRP: 22 BUS_TURN: 25 Thanks!
|
|
|
|
nars28
Newbie
Offline
Activity: 25
Merit: 0
|
|
April 14, 2019, 03:40:49 PM |
|
Anyone can helping for me? I have two RX580 (Asus ROG-STRIX o8g and Asus Dual-OC-4g), and I dont know how to do it... GPU 0: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] pci:0000:01:00.0 CAS CL: 23 W2R: 16 CCDS: 5 CCLD: 2 R2W: 28 NOPR: 0 NOPW: 0 RAS RC: 70 RRD: 6 RCDRA: 26 RCDR: 26 RCDWA: 21 RCDW: 21 MISC RFC: 192 TRP: 26 RP_RDA: 29 RP_WRA: 62 MISC2 WDATATR: 0 T32AW: 0 CRCWL: 25 CRCRL: 3 FAW: 0 PA2WDATA: 0 PA2RDATA: 0 DRAM1 RASMACTWR: 6 RASMACTRD: 5 ACTWR: 2 ACTRD: 3 DRAM2 RAS2RAS: 3 RP: 2 WRPLUSRP: 5 BUS_TURN: 6
GPU 1: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] pci:0000:04:00.0 CAS CL: 20 W2R: 15 CCDS: 5 CCLD: 2 R2W: 26 NOPR: 0 NOPW: 0 RAS RC: 60 RRD: 5 RCDRA: 22 RCDR: 24 RCDWA: 13 RCDW: 12 MISC RFC: 97 TRP: 22 RP_RDA: 24 RP_WRA: 44 MISC2 WDATATR: 0 T32AW: 0 CRCWL: 22 CRCRL: 3 FAW: 0 PA2WDATA: 0 PA2RDATA: 0 DRAM1 RASMACTWR: 25 RASMACTRD: 22 ACTWR: 10 ACTRD: 13 DRAM2 RAS2RAS: 13 RP: 10 WRPLUSRP: 22 BUS_TURN: 25 Thanks! You can try some of my pimped strap timings for Hynix: rus_mod hynix -i 0 --cl 18 --w2r 15 --r2w 25 --rc 61 --rrd 5 --rcdra 20 --rcdr 22 --rcdwa 13 --rcdw 12 --rfc 136 --trp 17 --rp_rda 25 --rp_wra 56 --t32aw 0 --crcwl 6 --crcrl 2 --faw 0 --pa2wdata 0 --pa2rdata 0 --RASMACTWR 47 --RASMACTRD 41 --ACTWR 15 --ACTRD 16 --RAS2RAS 148 --rp 39 --wrplusrp 49 --bus_turn 22 rus_mod2 hynix -i 0 --cl 18 --w2r 15 --r2w 25 --rc 61 --rrd 5 --rcdra 20 --rcdr 22 --rcdwa 13 --rcdw 12 --rfc 197 --trp 15 --rp_rda 30 --rp_wra 60 --t32aw 0 --crcwl 6 --crcrl 2 --faw 0 --pa2wdata 0 --pa2rdata 0 --RASMACTWR 47 --RASMACTRD 41 --ACTWR 15 --ACTRD 16 --RAS2RAS 148 --rp 39 --wrplusrp 49 --bus_turn 22 rus_mod3 hynix -i 0 --cl 18 --w2r 17 --r2w 25 --rc 61 --rrd 5 --rcdra 20 --rcdr 20 --rcdwa 14 --rcdw 14 --rfc 148 --trp 19 --rp_rda 22 --rp_wra 48 --t32aw 0 --crcwl 6 --crcrl 2 --faw 0 --pa2wdata 0 --pa2rdata 0 --RASMACTWR 47 --RASMACTRD 41 --ACTWR 15 --ACTRD 16 --RAS2RAS 148 --rp 39 --wrplusrp 49 --bus_turn 22 But for me this tool is unnusable because when applying timings it gives artifacts and crashes driver no matter which timings i apply (Polaris - rx570 & rx580). I got the values by decoding hex values of timings with R_Timing1.03 tool.
|
|
|
|
ingyenfrag
Newbie
Offline
Activity: 84
Merit: 0
|
|
April 14, 2019, 03:50:49 PM |
|
This is my lighter timing, hopefully stable: --CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
please test it.
latest 19.4.1 drivers. win10 vega64 lc ~1360/1100@875 51.4mhs with claymore 12. But hbm temp is hot 70C and one weaker vega gives sometimes red incorrect shares 22.3 kh/s trtl, testing for pool speed and hw errors Power Consumption at HW info ? 150 for eth and 135 for trtl I'm testing it on my both 6 and 5 card rigs. On the 6 card rig power consumption went up from 1155W to 1205W for roughly 10% hashrate gain (these are the worse silicon GPU-s, 3 of those running on 0.85V, 1 on 0.8375, last 2 on 0.825V). Unfortunately currently there is no watt meter on the 5 card rig. I will update about the stability. What happen with the timings when you reboot? If it stays after reboot, how do you set the timings back to the default values?
|
|
|
|
hammuh
Jr. Member
Offline
Activity: 41
Merit: 1
|
|
April 14, 2019, 04:26:45 PM |
|
This is my lighter timing, hopefully stable: --CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
please test it.
Working good so far. Using this on a dozen Vega 64s on turtle.
|
|
|
|
heavyarms1912
|
|
April 14, 2019, 04:27:01 PM |
|
-i 0 --cl 18 --w2r 17 --r2w 25 --rc 61 --rrd 5 --rcdra 20 --rcdr 20 --rcdwa 14 --rcdw 14 --rfc 148 --trp 19 --rp_rda 22 --rp_wra 48 --t32aw 0 --crcwl 6 --crcrl 2 --faw 0 --pa2wdata 0 --pa2rdata 0 --RASMACTWR 47 --RASMACTRD 41 --ACTWR 15 --ACTRD 16 --RAS2RAS 148 --rp 39 --wrplusrp 49 --bus_turn 22
But for me this tool is unnusable because when applying timings it gives artifacts and crashes driver no matter which timings i apply (Polaris - rx570 & rx580). I got the values by decoding hex values of timings with R_Timing1.03 tool.
Probably edit the -i 0 part. It might not be the actual GPU and someone might accidentally apply it on some other GPU.
|
|
|
|
Zorg33
Jr. Member
Offline
Activity: 144
Merit: 2
|
|
April 14, 2019, 04:28:00 PM |
|
What happen with the timings when you reboot?
They vanish into the void. except for FAW afaik
|
|
|
|
heavyarms1912
|
|
April 14, 2019, 04:36:06 PM |
|
What happen with the timings when you reboot?
They vanish into the void. except for FAW afaik why would faw be stuck. it should all revert back to stock timings.
|
|
|
|
Zorg33
Jr. Member
Offline
Activity: 144
Merit: 2
|
|
April 14, 2019, 04:43:30 PM Last edit: April 14, 2019, 05:31:37 PM by Zorg33 |
|
why would faw be stuck. it should all revert back to stock timings.
Someone posted it earlier that it remains. Of course only when rebooting without cutting power. Update: just to mention that I can't test all algos with the same driver under win10. 18.6.1 is faster in CN algos, but much slower than 19.3.3 in argon2d for example.
|
|
|
|
Eliovp (OP)
Legendary
Offline
Activity: 1050
Merit: 1293
Huh?
|
|
April 14, 2019, 06:59:21 PM Last edit: April 15, 2019, 07:11:39 AM by Eliovp |
|
Hey guys, I'm happy to see that users are finally posting their results and values here I edited the OP with some of these posts by users. Again, i'm pleased to see community effort again. I also just released a new version with a bunch of new values to play with ;-) Have fun! Cheerio!
|
|
|
|
lqs0208
Newbie
Offline
Activity: 4
Merit: 0
|
|
April 14, 2019, 08:26:30 PM |
|
This is my lighter timing, hopefully stable: --CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
please test it.
51.72 on PM4.2C VEGA56@64BIOS CORE:1100,875, MEM:1100,875 samsung memory? yes
|
|
|
|
lstrike
Newbie
Offline
Activity: 31
Merit: 0
|
|
April 14, 2019, 08:27:49 PM Last edit: April 14, 2019, 08:46:51 PM by lstrike |
|
Hey guys, I'm happy to see that users are finally posting their results and values here I edited the OP with some of these posts by users. Again, i'm pleased to see community effort again. I also just released a new version with a bunch of new values to play with ;-) Have fun! Cheerio! Thank you so much for your efforts and work! This is my lighter timing, hopefully stable: --CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
please test it.
Here is the test: - gpu 0,1 are vega red dragons 56 with Hynix (bad), flashed to 64, gpu 1450/1100 and 1450/950, all at 800mv ram/core on ONT, and 0,875 on gpuz - they directly crashed, so now work with: --rc 45 --rcdrd 12 --rcdwr 5 --faw 16 - gpu 2,3,4 vega 56 reference, flashed to 64, 1450/1100, all at 800mv ram/core on ONT, and 0,875 on gpuz - they work with your settings https://i.imgur.com/I7uBLRw.pngbefore 1070W from wall, no 1090W P.S. eth: 1190W from the wall https://i.ibb.co/RPBJYWx/Capture.png
|
|
|
|
nars28
Newbie
Offline
Activity: 25
Merit: 0
|
|
April 14, 2019, 09:14:00 PM |
|
-i 0 --cl 18 --w2r 17 --r2w 25 --rc 61 --rrd 5 --rcdra 20 --rcdr 20 --rcdwa 14 --rcdw 14 --rfc 148 --trp 19 --rp_rda 22 --rp_wra 48 --t32aw 0 --crcwl 6 --crcrl 2 --faw 0 --pa2wdata 0 --pa2rdata 0 --RASMACTWR 47 --RASMACTRD 41 --ACTWR 15 --ACTRD 16 --RAS2RAS 148 --rp 39 --wrplusrp 49 --bus_turn 22
But for me this tool is unnusable because when applying timings it gives artifacts and crashes driver no matter which timings i apply (Polaris - rx570 & rx580). I got the values by decoding hex values of timings with R_Timing1.03 tool.
Probably edit the -i 0 part. It might not be the actual GPU and someone might accidentally apply it on some other GPU. Of course it is the actual gpu. I have only 1 card in my test / moding machine
|
|
|
|
pbfarmer
Member
Offline
Activity: 340
Merit: 29
|
|
April 14, 2019, 10:17:02 PM |
|
-i 0 --cl 18 --w2r 17 --r2w 25 --rc 61 --rrd 5 --rcdra 20 --rcdr 20 --rcdwa 14 --rcdw 14 --rfc 148 --trp 19 --rp_rda 22 --rp_wra 48 --t32aw 0 --crcwl 6 --crcrl 2 --faw 0 --pa2wdata 0 --pa2rdata 0 --RASMACTWR 47 --RASMACTRD 41 --ACTWR 15 --ACTRD 16 --RAS2RAS 148 --rp 39 --wrplusrp 49 --bus_turn 22
But for me this tool is unnusable because when applying timings it gives artifacts and crashes driver no matter which timings i apply (Polaris - rx570 & rx580). I got the values by decoding hex values of timings with R_Timing1.03 tool.
Probably edit the -i 0 part. It might not be the actual GPU and someone might accidentally apply it on some other GPU. Of course it is the actual gpu. I have only 1 card in my test / moding machine He means other people who might copy your settings w/o understanding exactly what it's doing. It might be safer to remove '-i 0' from your OP to prevent others from making a potentially damaging mistake.
|
|
|
|
mZoleee
Newbie
Offline
Activity: 6
Merit: 0
|
|
April 14, 2019, 10:42:04 PM |
|
Anyone can helping for me? I have two RX580 (Asus ROG-STRIX o8g and Asus Dual-OC-4g), and I dont know how to do it... GPU 0: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] pci:0000:01:00.0 CAS CL: 23 W2R: 16 CCDS: 5 CCLD: 2 R2W: 28 NOPR: 0 NOPW: 0 RAS RC: 70 RRD: 6 RCDRA: 26 RCDR: 26 RCDWA: 21 RCDW: 21 MISC RFC: 192 TRP: 26 RP_RDA: 29 RP_WRA: 62 MISC2 WDATATR: 0 T32AW: 0 CRCWL: 25 CRCRL: 3 FAW: 0 PA2WDATA: 0 PA2RDATA: 0 DRAM1 RASMACTWR: 6 RASMACTRD: 5 ACTWR: 2 ACTRD: 3 DRAM2 RAS2RAS: 3 RP: 2 WRPLUSRP: 5 BUS_TURN: 6
GPU 1: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] pci:0000:04:00.0 CAS CL: 20 W2R: 15 CCDS: 5 CCLD: 2 R2W: 26 NOPR: 0 NOPW: 0 RAS RC: 60 RRD: 5 RCDRA: 22 RCDR: 24 RCDWA: 13 RCDW: 12 MISC RFC: 97 TRP: 22 RP_RDA: 24 RP_WRA: 44 MISC2 WDATATR: 0 T32AW: 0 CRCWL: 22 CRCRL: 3 FAW: 0 PA2WDATA: 0 PA2RDATA: 0 DRAM1 RASMACTWR: 25 RASMACTRD: 22 ACTWR: 10 ACTRD: 13 DRAM2 RAS2RAS: 13 RP: 10 WRPLUSRP: 22 BUS_TURN: 25 Thanks! You can try some of my pimped strap timings for Hynix: rus_mod hynix -i 0 --cl 18 --w2r 15 --r2w 25 --rc 61 --rrd 5 --rcdra 20 --rcdr 22 --rcdwa 13 --rcdw 12 --rfc 136 --trp 17 --rp_rda 25 --rp_wra 56 --t32aw 0 --crcwl 6 --crcrl 2 --faw 0 --pa2wdata 0 --pa2rdata 0 --RASMACTWR 47 --RASMACTRD 41 --ACTWR 15 --ACTRD 16 --RAS2RAS 148 --rp 39 --wrplusrp 49 --bus_turn 22 rus_mod2 hynix -i 0 --cl 18 --w2r 15 --r2w 25 --rc 61 --rrd 5 --rcdra 20 --rcdr 22 --rcdwa 13 --rcdw 12 --rfc 197 --trp 15 --rp_rda 30 --rp_wra 60 --t32aw 0 --crcwl 6 --crcrl 2 --faw 0 --pa2wdata 0 --pa2rdata 0 --RASMACTWR 47 --RASMACTRD 41 --ACTWR 15 --ACTRD 16 --RAS2RAS 148 --rp 39 --wrplusrp 49 --bus_turn 22 rus_mod3 hynix -i 0 --cl 18 --w2r 17 --r2w 25 --rc 61 --rrd 5 --rcdra 20 --rcdr 20 --rcdwa 14 --rcdw 14 --rfc 148 --trp 19 --rp_rda 22 --rp_wra 48 --t32aw 0 --crcwl 6 --crcrl 2 --faw 0 --pa2wdata 0 --pa2rdata 0 --RASMACTWR 47 --RASMACTRD 41 --ACTWR 15 --ACTRD 16 --RAS2RAS 148 --rp 39 --wrplusrp 49 --bus_turn 22 But for me this tool is unnusable because when applying timings it gives artifacts and crashes driver no matter which timings i apply (Polaris - rx570 & rx580). I got the values by decoding hex values of timings with R_Timing1.03 tool. Thanks, but unfortunately instant frozen.. I tried to change my CL value to 22 (default is 23) and same.. frozen. I can't change anything.. I use HiveOS and the amdmemtool command is not working.. just only amdmemtweak (but i think its same)
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
April 15, 2019, 01:38:52 AM |
|
This is my lighter timing, hopefully stable: --CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
please test it.
latest 19.4.1 drivers. win10 vega64 lc ~1360/1100@875 51.4mhs with claymore 12. But hbm temp is hot 70C and one weaker vega gives sometimes red incorrect shares 22.3 kh/s trtl, testing for pool speed and hw errors weaker vega lost hashrate to ~19.5kh/s after several hours and rig hangs after reboot attempt. Trying lo lower hbm2 clock from 1100 to 1090 ...
|
|
|
|
heavyarms1912
|
|
April 15, 2019, 02:10:50 AM |
|
Vega 56 - Samsung --ras 33 --rp 12 --rc 45 --rcdrd 13 --rcdwr 6 --rrds 3 --rrdl 6 --rtp 6 --ras 33 --rp 13 --rc 46 --rcdrd 13 --rcdwr 6 --rrds 3 --rrdl 6 --rtp 6
|
|
|
|
|