AMD Mem Tweak XL - Read/modify timings/pp/straps on the fly

[MajedPro]

using Vega 64 flashed to 56

with  --CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 44 --RP 14 --RRDS 3 --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14 --REF 17000 --RFC 249

Core: 1028
VDD 840
MVDD 800
Mem 1028

i'm getting 47.340 MH/s 114w (on phoenix miner) 54C Mem:75C (average based on 4xGPU)

wonder if that's possible to get even better...

for people interested in the flash I used amdvbflash (the same one i used for rx 5700 xt flash) with the equivalent model to my vega 64 (Nitro+) on https://www.techpowerup.com/vgabios/?architecture=&manufacturer=&model=RX+Vega+56&interface=&memType=&memSize=&since=

Vega64 flashed with Vega56 bios

using theses timings
--CL 20 --RAS 26 --RCDRD 12 --RCDWR 12 --RC 38 --RP 12 --RRDS 3 --RRDL 5 --RTP 6 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 13 --REF 24000 --RFC 239

Core 1097Mhz / 825mV
Mem 1028Mhz

you can get 54.5Mh/s solid ethereum hashrate at 115w to 130w depending on your model!

Forgot to mention that you will need to use TeamRedMiner to get the 54.5Mh/s

[0Lucifer0]

using Vega 64 flashed to 56

with  --CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 44 --RP 14 --RRDS 3 --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14 --REF 17000 --RFC 249

Core: 1028
VDD 840
MVDD 800
Mem 1028

i'm getting 47.340 MH/s 114w (on phoenix miner) 54C Mem:75C (average based on 4xGPU)

wonder if that's possible to get even better...

for people interested in the flash I used amdvbflash (the same one i used for rx 5700 xt flash) with the equivalent model to my vega 64 (Nitro+) on https://www.techpowerup.com/vgabios/?architecture=&manufacturer=&model=RX+Vega+56&interface=&memType=&memSize=&since=

Vega64 flashed with Vega56 bios

using theses timings
--CL 20 --RAS 26 --RCDRD 12 --RCDWR 12 --RC 38 --RP 12 --RRDS 3 --RRDL 5 --RTP 6 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 13 --REF 24000 --RFC 239

Core 1097Mhz / 825mV
Mem 1028Mhz

you can get 54.5Mh/s solid ethereum hashrate at 115w to 130w depending on your model!

Forgot to mention that you will need to use TeamRedMiner to get the 54.5Mh/s

i had to tweak it a bit to get it stable but I confirm I get about 54MH/s on team red miner

[Pericle13]

using Vega 64 flashed to 56

with  --CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 44 --RP 14 --RRDS 3 --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14 --REF 17000 --RFC 249

Core: 1028
VDD 840
MVDD 800
Mem 1028

i'm getting 47.340 MH/s 114w (on phoenix miner) 54C Mem:75C (average based on 4xGPU)

wonder if that's possible to get even better...

for people interested in the flash I used amdvbflash (the same one i used for rx 5700 xt flash) with the equivalent model to my vega 64 (Nitro+) on https://www.techpowerup.com/vgabios/?architecture=&manufacturer=&model=RX+Vega+56&interface=&memType=&memSize=&since=

Vega64 flashed with Vega56 bios

using theses timings
--CL 20 --RAS 26 --RCDRD 12 --RCDWR 12 --RC 38 --RP 12 --RRDS 3 --RRDL 5 --RTP 6 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 13 --REF 24000 --RFC 239

Core 1097Mhz / 825mV
Mem 1028Mhz

you can get 54.5Mh/s solid ethereum hashrate at 115w to 130w depending on your model!

Forgot to mention that you will need to use TeamRedMiner to get the 54.5Mh/s

i had to tweak it a bit to get it stable but I confirm I get about 54MH/s on team red miner

Tested that and yes I get 54 mh/s in TRM in miner console. But the pool still sees around around 47 mh/s, even after 48 hours of running.
Seems like an inflated figure on TRM side.
Guys can you check/concur this?

[Pericle13]

report back that figures have balanced out in the pool also.
It needed more days to reach the correct average I think

[_gaf]

can i apply memory straps in this format ?
777000000000000022AA1C00315A6B3CA0550F15B68C1506006AE4007C041420CA8980A9020004C 01712262B612B3715

How to apply in a format like this on the Linux version from command line?

[twoxeons]

Why is it that when I extract the source code, there's nothing there except the README file?  I would like to run this in Linux.

Nevermind.  I figured it out.

[rudykawi]

Hi, I have 2 difficult card for setting AMDmemtweak....one is Gigabyte Windforce Vega 64, other is Radeon Frontier edition
Can I have advise for best amdmemtweak setting for both? thanks for support.

I have also vega 56 , msi and his reference. I succeed to make it 50mh/s with rave OS with below setting :

Core 1150
Mem  960
Core V  810
Core M  810
Fan 50
Temp 59

inside the setting I use this:
amdmemtweak --i [GPU_ID_BY_TYPE] --CL 18 --RAS 23 --RCDRD 15 --RCDWR 11 --RC 34 --RP 13 --RRDS 3 --RRDL 4 --RTP 6 --FAW 12 --CWL 7 --WTRS 4 --WTRL 4 --WR 11 --REF 65000 --RFC 249

and gaining 50,5Mh/s
and already stable

But I can not implement this on my gigabyte vega64 windforce

Also ask for help and appreciated for setting the Radeon Frontier in RaveOS....
thanks.

[xMindx163]

Vega tests and tweaks. from 44 Mh at 110W from wall to 58.6 Mh to 210W (in Russian)
https://youtu.be/38dLTcYWv7c

[jikolo]

which latest driver you recommend for vega on windows that can still use amdmemtweak app?

[batsonxl]

Can someone please tell me why AMD mem tweak activates test mode on win10?
It causing problem to me win10 test mode enabled. is there anyway run this AMD mem tweak without test mode?
thanks

[tvukoman]

which latest driver you recommend for vega on windows that can still use amdmemtweak app?

20.4.2 (not latest, but well tested)

[wolverine5pl]

anyone has any settings for 5700 xt xfx?

[dfg123hjk]

hi, please help with settings for rx580, didn't flash them yet, what settings can be used for stock bios to increase MH
with memory 2090 can be unstable and stop mining after few hours, at 2100 won't start
thanks
https://imgupload.io/image/R4DKH

[DrX]

hi, please help with settings for rx580, didn't flash them yet, what settings can be used for stock bios to increase MH
with memory 2090 can be unstable and stop mining after few hours, at 2100 won't start
thanks

Just go for Core 1100 and Mem 2000 and add REF 20 ... Should be stable 30Mh/s

[wolverine5pl]

anyone tested it on 5700 xt??

[Yirvenpaeae]

hi,

can anyone help me to write a batch file?

i start with
folder of tweak tool....exe --i 0,1,2,3,4,5 --rcdrd 19 --REF 15600 --rfc 164

it runs the tool but nothing is changing

thx

[Morph42]

Hi everyone!  I was one of the many previously using Claymore to mine ETH until recently.  I've now switched over to the current version of lolminer.  In doing so I noticed my hashrate dropped and attempting to get it back up again.  It was recommended to use AMDmemTweakXL.  And after launching and changing the refresh from (5) to (30) on each card I already gained another 1.5mhs per card.

Claymore's had some settings I made in the command line that increased the hash;
   [-dbg -1 -mport 3333 -mpsw Miner1 -etha 0 -tt 80 -tstop 90 -eres 0 -rxboost 1 -y 1 -powlim -10 -cclock 1200 -cvddc 820 -mclock 2150 -mvddc 900 -fanmin 90 -fanmax 100 -strap 1]

I know that Claymore and lolminer are different and I may not get the same hashrate, but I am looking at the AMDmemTweakXL and I'm thinking I could do the same here to bring it up some more, but there's a LOT more settings (and sub-settings) to mess with.

I'm asking to see if anyone has already done what I'm trying here.  At least a better starting point (and perhaps some pointers).

Each rig is:
Windows 10 x64
(12) AMD RX570 8G cards (current AMD driver 20.4.1, but 20.11.3 is available)
lolminer 1.16a
AMDTweak 1.1.0.3

Adding in a snapshot of my AMD via GPUz

[dejvic]

Dear, can you help me with amdmemtweak
for this card - ATI Sapphire NITRO RX Vega 56 8 GB Hynix HBM2, 113-D0500310-O01

i have this timing -
amdmemtweak --CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 36 --RP 14 --RRDS 3 --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14 --REF 65535 --RFC 249


and my maximum is 45.9Mhs

Please help with tunning this tweak  :-)

Thank you very much for all.

[Morph42]

Hi everyone!  I was one of the many previously using Claymore to mine ETH until recently.  I've now switched over to the current version of lolminer.  In doing so I noticed my hashrate dropped and attempting to get it back up again.  It was recommended to use AMDmemTweakXL.  And after launching and changing the refresh from (5) to (30) on each card I already gained another 1.5mhs per card.

Claymore's had some settings I made in the command line that increased the hash;
   [-dbg -1 -mport 3333 -mpsw Miner1 -etha 0 -tt 80 -tstop 90 -eres 0 -rxboost 1 -y 1 -powlim -10 -cclock 1200 -cvddc 820 -mclock 2150 -mvddc 900 -fanmin 90 -fanmax 100 -strap 1]

I know that Claymore and lolminer are different and I may not get the same hashrate, but I am looking at the AMDmemTweakXL and I'm thinking I could do the same here to bring it up some more, but there's a LOT more settings (and sub-settings) to mess with.

I'm asking to see if anyone has already done what I'm trying here.  At least a better starting point (and perhaps some pointers).

Each rig is:
Windows 10 x64
(12) AMD RX570 8G cards (current AMD driver 20.4.1, but 20.11.3 is available)
lolminer 1.16a
AMDTweak 1.1.0.3

Adding in a snapshot of my AMD via GPUz

Hmmm...anyone out there?  I'm a newbie here when it comes to doing this deep of config.  The idea of flashing the bios of each card is a little terrifying and looking for some help on this.
Digging a little further into GPUz I find I'm using Polaris20 (ver015.050) on the AMD bios.  And then if I do that, help with some basic timings to reduce the power (-10) or increasing the cclock or clock
fearful of damaging anything and looking for some guidance.

[miner29]

Dear, can you help me with amdmemtweak
for this card - ATI Sapphire NITRO RX Vega 56 8 GB Hynix HBM2, 113-D0500310-O01

i have this timing -
amdmemtweak --CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 36 --RP 14 --RRDS 3 --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14 --REF 65535 --RFC 249


and my maximum is 45.9Mhs

Please help with tunning this tweak  :-)

Thank you very much for all.

Try

ras 26 / rcdrd 12 / rcdwr 12 / rc 38 / rp 12 / rrds 4 / rrdl 5 . rtp 6 /faw 12 / cwl 8 / wtrs 4 / wtrl 9 / wr 13 / ref 24000 (21100 if it doesnt like 24000) / rfc 239

core 1090 / mem 1020 / volt 825 (835 if unstable)

I get 53.18mhs with my vega56's..