Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
July 22, 2014, 12:05:24 PM |
|
Clay did you notice that the miner 6.0 gives more hash in the mineru however the pool gives 10 to 15% less real hash. Many users have this problem. After 12 digging there has been a lot fewer coins excavated??
I don't know what is "mineru", sorry. Miner shows "raw" hashrate, it is always more than hashrate that pools show, it was already discussed here a few times. Also some pools send new jobs with big delays often, it cause a lot of stale shares and pools don't indicate them at all (except Minergate).
|
|
|
|
cacanin
Newbie
Offline
Activity: 14
Merit: 0
|
|
July 22, 2014, 12:34:24 PM |
|
My fault for "miner" I thought the Minner 6.0 provides more hash than in version 4.0 or 5.0, while the pool shows less power than the 4.0 or 5.0 although in version 6.0 acceleration 2-3%
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
July 22, 2014, 01:40:02 PM |
|
Important update v6.1:
- Fixed memory leak.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
July 22, 2014, 01:44:51 PM |
|
My fault for "miner" I thought the Minner 6.0 provides more hash than in version 4.0 or 5.0, while the pool shows less power than the 4.0 or 5.0 although in version 6.0 acceleration 2-3%
You can use v4 or v5 if you think that they are faster, but it's not true. Even when I use same version I see 10-20% speed deviation in hashrate that pools show, it looks like pool-related issue, latest versions of the miner are not slower. If you know some pool that shows exact hashrate let me know and I will test all recent versions on it.
|
|
|
|
braxx
|
|
July 22, 2014, 01:53:31 PM |
|
installed 6.1 (after 6.0)and immediatly one of my cards crash... tried over and over... same cards dies. rebooted the rig... everything looks fine now even a little bit more hashrate than before the reboot .
|
|
|
|
Grim
|
|
July 22, 2014, 02:22:38 PM |
|
any chance that 5xxx cards can be optimized even more?
6xxx cards seem to work fine with -a 3 setting but 5xxx cards just seem too slow.
6950/6970 about 350 to 370 h/s eg. 5850/5870 about 150 to 180 h/s
Is the problem the 1 GB vram for 5xxx cards?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
July 22, 2014, 02:33:30 PM Last edit: July 22, 2014, 03:21:23 PM by Claymore |
|
any chance that 5xxx cards can be optimized even more? Is the problem the 1 GB vram for 5xxx cards?
Yes, video card must have 2GB for good performance.
|
|
|
|
Kablam
Newbie
Offline
Activity: 33
Merit: 0
|
|
July 22, 2014, 03:17:13 PM |
|
just to let you know 4 cards run fine on 4gb ram on windows 8.1 but 5-6 cards need 8gb...
at least for me;)
|
|
|
|
Infinium8
Newbie
Offline
Activity: 52
Merit: 0
|
|
July 22, 2014, 04:02:48 PM |
|
|
|
|
|
Eastwind
|
|
July 22, 2014, 05:38:37 PM |
|
just to let you know 4 cards run fine on 4gb ram on windows 8.1 but 5-6 cards need 8gb...
at least for me;)
I have 6 cards (8GPU in total )with combination of 4 X 7950 and 2 X 7990 run fine on 4GB. The virtual memory is larger than 16 GB. Win 8.0.
|
|
|
|
atp1916
Legendary
Offline
Activity: 854
Merit: 1000
|
|
July 22, 2014, 05:50:45 PM |
|
just to let you know 4 cards run fine on 4gb ram on windows 8.1 but 5-6 cards need 8gb...
at least for me;)
I've been running 5 290s on some of my rigs with 4GB ram with no real problems, so i'm not entirely sure that's true. It's got more to do with available virtual memory, i surmise. Perhaps Claymore can comment on physical ram requirements, i would be curious to know.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
July 22, 2014, 06:09:48 PM |
|
just to let you know 4 cards run fine on 4gb ram on windows 8.1 but 5-6 cards need 8gb...
at least for me;)
I've been running 5 290s on some of my rigs with 4GB ram with no real problems, so i'm not entirely sure that's true. It's got more to do with available virtual memory, i surmise. Perhaps Claymore can comment on physical ram requirements, i would be curious to know. I cannot find exact requirements. In most configurations it works with 4GB RAM with any number of cards. But sometimes 4GB is not enough. Virtual memory definitely helps, but if you have only 2GB of RAM it won't work in most configurations anyway. It is something related to AMD drivers and I cannot find any public documents about it.
|
|
|
|
TheFuneral
|
|
July 22, 2014, 07:58:57 PM |
|
Does anyone have advice or steps for getting this to work with XFX R9 290s? I have yet to find a stable miner that lasts for more than 24 hours. The best one to date is 4.2
The errors I experience are I'll get threadCL is hanging watchdog something OR I'll come back to my machine and it's been restarted saying windows has created and nothing is running.
My 7950s work flawlessly FWIW.
Would it be helpful for me to start dumping log files here? Is there anything I can do or where can I go to debug issues locally?
|
|
|
|
nrg_wolf
Legendary
Offline
Activity: 882
Merit: 1000
|
|
July 23, 2014, 12:33:45 AM |
|
Does anyone have advice or steps for getting this to work with XFX R9 290s? I have yet to find a stable miner that lasts for more than 24 hours. The best one to date is 4.2
The errors I experience are I'll get threadCL is hanging watchdog something OR I'll come back to my machine and it's been restarted saying windows has created and nothing is running.
My 7950s work flawlessly FWIW.
Would it be helpful for me to start dumping log files here? Is there anything I can do or where can I go to debug issues locally?
Would it be helpful for me to start dumping log files here? Is there anything I can do or where can I go to debug issues locally? try takeing your OC down some. i believe that issue is no longer a problem if you upgrade to 14.6-14.7 beta drivers as well.
|
|
|
|
TheFuneral
|
|
July 23, 2014, 05:01:35 AM |
|
Does anyone have advice or steps for getting this to work with XFX R9 290s? I have yet to find a stable miner that lasts for more than 24 hours. The best one to date is 4.2
The errors I experience are I'll get threadCL is hanging watchdog something OR I'll come back to my machine and it's been restarted saying windows has created and nothing is running.
My 7950s work flawlessly FWIW.
Would it be helpful for me to start dumping log files here? Is there anything I can do or where can I go to debug issues locally?
Would it be helpful for me to start dumping log files here? Is there anything I can do or where can I go to debug issues locally? try takeing your OC down some. i believe that issue is no longer a problem if you upgrade to 14.6-14.7 beta drivers as well. My cards are all running at stock. So I should upgrade from 14.6 RC2 beta drivers to 14.7 beta drivers?
|
|
|
|
Black_Adder
Newbie
Offline
Activity: 53
Merit: 0
|
|
July 23, 2014, 10:22:40 AM |
|
set to -a 3 for to decrease power. 4 7950 -a 1 = 625W 4 7950 -a 2 = 623W 4 7950 -a 3 = 565W The productivity (1030/1500) : 1710kh a3>a1>a2 Why do so - I do not know?
-a 3 works great and it increased my hashrate too my 3 x r9 280x vapor -x were running on 1070 hash now they run 1450 hash Thanks
|
|
|
|
nrg_wolf
Legendary
Offline
Activity: 882
Merit: 1000
|
|
July 23, 2014, 11:28:16 AM |
|
Does anyone have advice or steps for getting this to work with XFX R9 290s? I have yet to find a stable miner that lasts for more than 24 hours. The best one to date is 4.2
The errors I experience are I'll get threadCL is hanging watchdog something OR I'll come back to my machine and it's been restarted saying windows has created and nothing is running.
My 7950s work flawlessly FWIW.
Would it be helpful for me to start dumping log files here? Is there anything I can do or where can I go to debug issues locally?
Would it be helpful for me to start dumping log files here? Is there anything I can do or where can I go to debug issues locally? try takeing your OC down some. i believe that issue is no longer a problem if you upgrade to 14.6-14.7 beta drivers as well. My cards are all running at stock. So I should upgrade from 14.6 RC2 beta drivers to 14.7 beta drivers? i use a mixture of 14.6 and 14.7 drivers and the thread hang issue only happens with high OC. so an upgrade would be a good idea lol.
|
|
|
|
kcheel
|
|
July 23, 2014, 02:57:27 PM |
|
Just started mining XMR and I am getting 1730ish on rig with 5 270's and 2150ish on rig with 6 270x's. Both using the -a 3 setting. That sound about right?
|
|
|
|
TheFuneral
|
|
July 23, 2014, 04:16:34 PM |
|
Does anyone have advice or steps for getting this to work with XFX R9 290s? I have yet to find a stable miner that lasts for more than 24 hours. The best one to date is 4.2
The errors I experience are I'll get threadCL is hanging watchdog something OR I'll come back to my machine and it's been restarted saying windows has created and nothing is running.
My 7950s work flawlessly FWIW.
Would it be helpful for me to start dumping log files here? Is there anything I can do or where can I go to debug issues locally?
Would it be helpful for me to start dumping log files here? Is there anything I can do or where can I go to debug issues locally? try takeing your OC down some. i believe that issue is no longer a problem if you upgrade to 14.6-14.7 beta drivers as well. My cards are all running at stock. So I should upgrade from 14.6 RC2 beta drivers to 14.7 beta drivers? i use a mixture of 14.6 and 14.7 drivers and the thread hang issue only happens with high OC. so an upgrade would be a good idea lol. Thanks I'll give that a try next! Sounds like we need to update page one.
|
|
|
|
Sglasio
|
|
July 23, 2014, 04:56:23 PM |
|
set to -a 3 for to decrease power. 4 7950 -a 1 = 625W 4 7950 -a 2 = 623W 4 7950 -a 3 = 565W The productivity (1030/1500) : 1710kh a3>a1>a2 Why do so - I do not know?
-a 3 works great and it increased my hashrate too my 3 x r9 280x vapor -x were running on 1070 hash now they run 1450 hash Thanks can you show you cmd line? thx )
|
|
|
|
|