I've run this on two rigs, one with 3x 7970's and another 2x 7970's. On both rigs, after I set the bamt.conf and pool I can only get the first card to mine with cgminer. If I run it by command line, I can get all cards to mine.
When I hit 1 for GPU1 while in GPUMON I get this... (hitting 2 for GPU2 is the same)
cgminer version 2.4.1 - Started: [2012-05-25 04:08:20]
--------------------------------------------------------------------------------
TQ: 2 ST: 2 SS: 0 DW: 0 NB: 1 LW: 2 GF: 0 RF: 0
Connected to
http://us2.eclipsemc.com:8337 with LP as user me
Block: 000007274358314b696a8802185423fa... Started: [04:08:20]
--------------------------------------------------------------------------------
[P]ool management [G]PU management [ S]ettings [D]isplay options [Q]uit
GPU 0: 60.0C 3411RPM | 0.0/ 0.0Mh/s | A:1 R:0 HW:0 U:600.00/m I:11
--------------------------------------------------------------------------------
[2012-05-25 04:08:19] Started cgminer 2.4.1
[2012-05-25 04:08:19] Started cgminer 2.4.1
[2012-05-25 04:08:20] ADL found more devices than opencl!
[2012-05-25 04:08:20] There is possibly at least one GPU that doesn't support OpenCL
[2012-05-25 04:08:20] Use the gpu map feature to reliably map OpenCL to ADL
[2012-05-25 04:08:20] WARNING: Number of OpenCL and ADL devices did not match!
[2012-05-25 04:08:20] Hardware monitoring may NOT match up with devices!
[2012-05-25 04:08:20] Probing for an alive pool
[2012-05-25 04:08:20] Long-polling activated for
http://us2.eclipsemc.com:8337/LP [2012-05-25 04:08:20] Pool 0
http://us2.eclipsemc.com:8337 alive
[2012-05-25 04:08:20] Accepted cd868403.d19db6ce GPU 0
[2012-05-25 04:08:25] API bind to port 4028 failed - trying again in 30sec
If I quit out of this and run it by command line, I can get all three to run.
Here is my command line I'm running: /opt/miners/cgminer/cgminer -o
http://us2.eclipsemc.com:8337 -u me -p pass --intensity 11 --api-listen --api-port 4028
Does anyone have any idea where I should I start looking?
Thanks in advance for any advice,
-Tossil
EDITED to Add...
I ran CGMINER with -n and I see there is an error -1.
root@bamt-miner:/home/user# /opt/miners/cgminer/cgminer -o
http://us2.eclipsemc.com:8337 -u me -p pass --intensity 11 --api-listen --api-port 4028 -n
[2012-05-25 12:49:58] CL Platform 0 vendor: Advanced Micro Devices, Inc.
[2012-05-25 12:49:58] CL Platform 0 name: AMD Accelerated Parallel Processing
[2012-05-25 12:49:58] CL Platform 0 version: OpenCL 1.1 AMD-APP (844.4)
[2012-05-25 12:49:58] Platform 0 devices: 3
[2012-05-25 12:49:58] 0 Tahiti
[2012-05-25 12:49:58] 1 Tahiti
[2012-05-25 12:49:58] 2 Tahiti
[2012-05-25 12:49:58] ADL Initialisation Error! Error -1!
[2012-05-25 12:49:58] 3 GPU devices max detected
root@bamt-miner:/home/user#