LinuxCoin A lightweight Debian based OS with everything ready to go.

[Nebuluz]

What drivers are you waiting for? 11.9? 

[1713549405]

1713549405

[1713549405]

1713549405

[1713549405]

1713549405

[drgr33n]

What drivers are you waiting for? 11.9? 

Yup should be out in a few weeks maybe sooner. LinuxCoin is now rocking xorg 1.11

[max in montreal]

In a root terminal when i check cpu usage using the top command, xorg is using a lot of cpu, anywhere from 40% to 97%...why would this be?

[drgr33n]

In a root terminal when i check cpu usage using the top command, xorg is using a lot of cpu, anywhere from 40% to 97%...why would this be?

I wouldn't know I haven't seen the same behavior here ? Whats the CPU monitor reading in the taskbar ?

Code:

    top - 12:54:48 up 2 min,  4 users,  load average: 0.38, 0.37, 0.15
    Tasks: 117 total,   1 running, 113 sleeping,   0 stopped,   3 zombie
    Cpu(s):  3.6%us,  0.7%sy,  0.0%ni, 95.6%id,  0.0%wa,  0.0%hi,  0.2%si,  0.0%st
    Mem:   1091588k total,   714676k used,   376912k free,   102904k buffers
    Swap:        0k total,        0k used,        0k free,   425492k cached
     
      PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND            
     2558 root      20   0  235m  17m 5344 S   11  1.6   0:04.14 Xorg              
     3446 root      20   0  212m  11m 8444 S    1  1.0   0:01.01 x-terminal-emul    
     2054 root      20   0 90616 3912 3196 S    1  0.4   0:00.69 vmtoolsd          
     3442 user      20   0  162m 7056 5684 S    1  0.6   0:00.28 gksu              
     2967 root      -2   0  4120 2072 1724 S    0  0.2   0:00.15 watchdog          
     3463 root      20   0 19256 1312  964 R    0  0.1   0:00.27 top                
        1 root      20   0 10608  812  688 S    0  0.1   0:02.16 init              
        2 root      20   0     0    0    0 S    0  0.0   0:00.00 kthreadd          
        3 root      20   0     0    0    0 S    0  0.0   0:00.04 ksoftirqd/0        
        4 root      20   0     0    0    0 S    0  0.0   0:00.00 kworker/0:0        
        5 root      20   0     0    0    0 S    0  0.0   0:00.00 kworker/u:0        
        6 root      RT   0     0    0    0 S    0  0.0   0:00.00 migration/0        
        7 root      RT   0     0    0    0 S    0  0.0   0:00.00 watchdog/0        
        8 root      RT   0     0    0    0 S    0  0.0   0:00.00 migration/1        
        9 root      20   0     0    0    0 S    0  0.0   0:00.00 kworker/1:0        
       10 root      20   0     0    0    0 S    0  0.0   0:00.01 ksoftirqd/1        
       11 root      20   0     0    0    0 S    0  0.0   0:00.20 kworker/0:1

[max in montreal]

Code:

root@linuxcoin:/home/user# top

top - 14:14:24 up  6:10,  4 users,  load average: 1.55, 1.71, 1.56
Tasks: 185 total,   4 running, 178 sleeping,   0 stopped,   3 zombie
Cpu(s): 34.5%us, 45.6%sy,  0.0%ni, 12.3%id,  7.6%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:   6121188k total,  2335816k used,  3785372k free,   145312k buffers
Swap:        0k total,        0k used,        0k free,   848604k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND            
 2652 root       5   0  439m  80m  46m S 67.4  1.3 267:18.30 Xorg               
31064 user       1   0  655m  82m  29m S  4.3  1.4   0:08.77 firefox-bin        
12329 root       6   0  258m  28m  14m R  2.0  0.5   3:01.08 AMDOverdriveCtr    
12331 root       7   0  258m  27m  14m R  2.0  0.5   2:46.21 AMDOverdriveCtr    
12336 root       5   0  258m  27m  14m R  1.7  0.5   2:48.54 AMDOverdriveCtr    
 3206 root       1   0 77588  17m 6592 S  1.0  0.3   1:13.97 ulatencyd          
12337 root       1   0  252m  21m  14m S  1.0  0.4   1:33.04 AMDOverdriveCtr    
12335 root       1   0  252m  21m  14m S  0.7  0.4   1:34.22 AMDOverdriveCtr    
12338 root       1   0  252m  21m  14m S  0.7  0.4   1:33.01 AMDOverdriveCtr    
 3924 user       1   0  234m  12m 9132 S  0.3  0.2   0:24.21 lxpanel            
12334 user       1   0  233m  11m 8364 S  0.3  0.2   0:27.17 lxterminal         
12339 root       1   0  254m  23m  14m S  0.3  0.4   0:51.07 AMDOverdriveCtr    
12341 user       1   0 1872m  75m  10m S  0.3  1.3   0:57.30 java               
16066 root       1   0     0    0    0 S  0.3  0.0   0:00.24 kworker/0:2        
16244 user       1   0  342m  82m  28m S  0.3  1.4   0:11.17 phoenix.py     

[drgr33n]

Code:

root@linuxcoin:/home/user# top

top - 14:14:24 up  6:10,  4 users,  load average: 1.55, 1.71, 1.56
Tasks: 185 total,   4 running, 178 sleeping,   0 stopped,   3 zombie
Cpu(s): 34.5%us, 45.6%sy,  0.0%ni, 12.3%id,  7.6%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:   6121188k total,  2335816k used,  3785372k free,   145312k buffers
Swap:        0k total,        0k used,        0k free,   848604k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND            
 2652 root       5   0  439m  80m  46m S 67.4  1.3 267:18.30 Xorg               
31064 user       1   0  655m  82m  29m S  4.3  1.4   0:08.77 firefox-bin        
12329 root       6   0  258m  28m  14m R  2.0  0.5   3:01.08 AMDOverdriveCtr    
12331 root       7   0  258m  27m  14m R  2.0  0.5   2:46.21 AMDOverdriveCtr    
12336 root       5   0  258m  27m  14m R  1.7  0.5   2:48.54 AMDOverdriveCtr    
 3206 root       1   0 77588  17m 6592 S  1.0  0.3   1:13.97 ulatencyd          
12337 root       1   0  252m  21m  14m S  1.0  0.4   1:33.04 AMDOverdriveCtr    
12335 root       1   0  252m  21m  14m S  0.7  0.4   1:34.22 AMDOverdriveCtr    
12338 root       1   0  252m  21m  14m S  0.7  0.4   1:33.01 AMDOverdriveCtr    
 3924 user       1   0  234m  12m 9132 S  0.3  0.2   0:24.21 lxpanel            
12334 user       1   0  233m  11m 8364 S  0.3  0.2   0:27.17 lxterminal         
12339 root       1   0  254m  23m  14m S  0.3  0.4   0:51.07 AMDOverdriveCtr    
12341 user       1   0 1872m  75m  10m S  0.3  1.3   0:57.30 java               
16066 root       1   0     0    0    0 S  0.3  0.0   0:00.24 kworker/0:2        
16244 user       1   0  342m  82m  28m S  0.3  1.4   0:11.17 phoenix.py     

You have quite a bit running ? I can see iceweasel, several instances of AMDOverdriveCtl, a java application and phoenix. I would suggest you first reboot your PC and start applications one by one. Once you see the usage go up then let me know whats pushing it up that high and I will help more.

[max in montreal]

You have quite a bit running ? I can see iceweasel, several instances of AMDOverdriveCtl, a java application and phoenix. I would suggest you first reboot your PC and start applications one by one. Once you see the usage go up then let me know whats pushing it up that high and I will help more.

Iceweasel was to post the screenshot.
AMDOverdriveCtl is open to control the fans
a java application is for the hopper
pheonix is for the...phoenix.

is it possible to use fanctrl in AMDOverdriveCtl any other way? Without keeping it open? My system has 7 gpu.

[drgr33n]

You have quite a bit running ? I can see iceweasel, several instances of AMDOverdriveCtl, a java application and phoenix. I would suggest you first reboot your PC and start applications one by one. Once you see the usage go up then let me know whats pushing it up that high and I will help more.

Iceweasel was to post the screenshot.
AMDOverdriveCtl is open to control the fans
a java application is for the hopper
pheonix is for the...phoenix.

is it possible to use fanctrl in AMDOverdriveCtl any other way? Without keeping it open? My system has 7 gpu.

If your just using AMDOverdriveCtl just for your fans I would just use the standard AMD tools. Didn't I help you out on a bash script the other day ? If you want a small bash script to start your fans and overclock your cards use this little script to set your fans and overclock your cards. It's been setup for four cards if you have more or less add / remove from the loop.

3 cards would be

Code:

for i in 0 1 2; do

6 cards would be

Code:

for i in 0 1 2 3 4 5; do

Code:

#!/bin/bash
#globals

FANSPEED=80 #fanspeed as percentage
CCLOCK=990 # Core clock speed
MCLOCK=300 # Memory clock speed

#Meat & Potatoes
aticonfig --od-enable
for i in 0 1 2 3; do
  DISPLAY=:0.$i sudo aticonfig --pplib-cmd="set fanspeed 0 $FANSPEED"
  sudo aticonfig --odsc="$CCLOCK,$MCLOCK" --adapter=$i
done

[max in montreal]

the loop is great but not all gpu are created equal, plus i am using 4 cards, a 5870 and 3 5970, so i would prefer no loop.

[Christian Pezza]

5 btc for help me to run my rig with linuxcoin please PM me.

thank you

[Christian Pezza]

All right how I can configure internet connection, I guess that's the only problem. Thank you

[Christian Pezza]

k I can see the network but for some reason i cant run internet :/

help please

[drgr33n]

k I can see the network but for some reason i cant run internet :/

help please

Your going to have to be a little more descriptive before anyone can help. Please list your hardware and what exactly you are doing bud

[Christian Pezza]

I got everything in place! Linuxcoin on the USB and all running as can see all the hardware.

I can ping the Router, 192.168.1.1 I can see running the ifconfig. But when I run the browser or the Guminer etc tey wont get trough internet

[drgr33n]

I got everything in place! Linuxcoin on the USB and all running as can see all the hardware.

I can ping the Router, 192.168.1.1 I can see running the ifconfig. But when I run the browser or the Guminer etc tey wont get trough internet

Would suggest somethings up with the router then ? Can you post the output of ..

Code:

traceroute google.co.uk
cat /etc/resolv.conf
ip addr

[Christian Pezza]

I got everything in place! Linuxcoin on the USB and all running as can see all the hardware.

I can ping the Router, 192.168.1.1 I can see running the ifconfig. But when I run the browser or the Guminer etc tey wont get trough internet

Would suggest somethings up with the router then ? Can you post the output of ..

Code:

traceroute google.co.uk
cat /etc/resolv.conf
ip addr

traceroute google.co.uk
google.co.uk: Name or service not known
cannot handle the "host" cmdline arg on position 1 (argc 1)

cat /etc/resolv.confInput/output error

ip addr

1: lo: inet 127.0.0.1/8  bla bla bla
2: eth0 192.168.1.5/24 bla bla bla

with ubuntu I never have problem to run the rig and I have a bunch of other pc running in the same LAN

I just send a donation as thank you in advance

[Christian Pezza]

all right I got another rig install in another location and internet works fine here.

YESSSSSSS IT WORKS YEPPAY

well now I have to study how to make it run all of the cards but at list one works and you guys did an amezing job! THANK YOU

[Christian Pezza]

Just an update from "your" perfect beta tester as linuxcoin for dummy's

all right I try to run all the cards with script autostart thing but fatal error everywhere

so trying now to run trough guiminer but I can't make it for more then one card I guess I mistaking the way to do it... any suggestions?

thank for helping linux nobb

edit: got to run manually but this is the problem with the fatal error

user@linuxcoin:~$  cd /opt/miners/phoenix/
user@linuxcoin:/opt/miners/phoenix$ ./phoenix.py -v -u http://xxxx:xxxx@mining.mainframe.nl:8343 -k phatk WORKSIZE=128 AGGRESSION=5 VECTORS BFI_INT FASTLOOPS=false DEVICE=2
[19/09/2011 06:36:45] Finding inner ELF...
[19/09/2011 06:36:45] Patching inner ELF...
[19/09/2011 06:36:45] Patching instructions...
[19/09/2011 06:36:45] BFI-patched 472 instructions...
[19/09/2011 06:36:45] Patch complete, returning to kernel...
[19/09/2011 06:36:45] Applied BFI_INT patch
[19/09/2011 06:36:45] FATAL kernel error: Failed to load OpenCL kernel!

please let me know what I should do

[metonymous]

persistance got you down? unable to force your sync into your newfangled key?

have no fear... bootstrap is here.

whipped up a bootstrap turns a virgin linuxcoin boot into a mother of all bitcoins.

initial version does the following

• launches the ATI license agreement (read fast, mash enter)
• launches the timezone set utility
• installs a screensaver file set to 1 minute, no fade, blank screen
• attempts to make sure screensaver is running (needs work)
• changes to cgminer-2.0.3 directory, ready for action

has bugs, read the code before u run it mmmkay? public domain, unless otherwise stated.

useful when persistance isn't

from an lxterminajig

Code:

git clone git://github.com/metonymous/lc.git
cd lc
cat bootstrap.sh # for what could it do? it might be a bad bad cat
#./bootstrap.sh

Then voilà! My scar! Pepito knows what to do. Did you know the voice for Madeleine was replaced by the voice for Chloe in season 2 onwards? True story.

Now, run "./cgminer <options>" from that dir

Or over-write the default cgminer if u desire.

I said good day, sir.

[sethsethseth]

Can someone explain to a linux noob how I adjust the resolution and get this to run in portrait mode?