BFGMiner 5.5.0: CPU/GPU/FPGA/ASIC mining software, GBT+Stratum, RPC, Linux/Win64

[Luke-Jr]

Can you pastebin a debuglog of the detection (output of bfgminer -d? -D)?

Maybe you can use the serial number (IIRC, always 0001 for U3s): -S antminer@0001

"-S antminer@0001" worked, 5.2.0 launched and saw the U3, however I cannot get it to hash greater than 1GH/s, and then it decrease to SICK rapidly (a result of freq/volt/timing settings I'm sure, still need to figure out some values there).

"bfgminer -d antminer" also worked, but since it only detects antminer machines that way it does not start my netfury sticks (as expected).

"bfgminer -D" runs in debug mode but I do not know if/where it creates an output file.  I assume you want me to run -D with "-S all" to see where the device scan hangs, correct?

Thanks again for the help.

The exact command is: bfgminer -d? -D -S all
Post the full output in a [ code] block here.

[kecho]

Do you have any plans to integrate the "rockminer_fast" into main release?

[Luke-Jr]

Do you have any plans to integrate the "rockminer_fast" into main release?

Yes, I need to spend more time testing it with older R-Box.

[Mikestang]

The exact command is: bfgminer -d? -D -S all
Post the full output in a [ code] block here.

Here's the output, it freezes at the last line and does not return to the command prompt, much like when trying to start the program:

Code:

C:\bfgminer520>bfgminer -d? -D -S all

 [2015-06-29 10:14:32] setrlimit: Not supported by platform
 [2015-06-29 10:14:32] Started bfgminer 5.2.0
 [2015-06-29 10:14:32] usb_devinfo_scan: Error opening device usb:002:001: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-06-29 10:14:32] usb_devinfo_scan: Error opening device usb:001:001: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-06-29 10:14:32] usb_devinfo_scan: Error opening device usb:003:006: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-06-29 10:14:32] usb_devinfo_scan: Error opening device usb:001:002: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-06-29 10:14:32] usb_devinfo_scan: Error opening device usb:002:002: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-06-29 10:14:32] usb_devinfo_scan: Error opening device usb:003:001: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-06-29 10:14:32] hidapi_try_lib: Couldn't load libhidapi.dll: unknown
 [2015-06-29 10:14:32] hidapi_try_lib: Successfully loaded libhidapi-0.dll
 [2015-06-29 10:14:32] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-06-29 10:14:32] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-06-29 10:14:32] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-06-29 10:14:32] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-06-29 10:14:32] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-06-29 10:14:32] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-06-29 10:14:32] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-06-29 10:14:32] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-06-29 10:14:32] hid_devinfo_scan: Found "NanoFury NF1 CryptoRig" serial "0000111830"
 [2015-06-29 10:14:32] hid_devinfo_scan: Found "NanoFury NF1 CryptoRig" serial "0000109749"
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-06-29 10:14:32] Failed to get PortName registry key value in lowl-vcom.c _vcom_devinfo_scan_win
dows__hubport():563: The system cannot find the file specified.
 [2015-06-29 10:14:32] Failed to get PortName registry key value in lowl-vcom.c _vcom_devinfo_scan_win
dows__hubport():563: The system cannot find the file specified.
 [2015-06-29 10:14:32] Failed to ioctl in lowl-vcom.c windows_usb_get_string():505: A device attached
to the system is not functioning.
 [2015-06-29 10:14:32] FTD2XX.DLL failed to load, not using FTDI autodetect
 [2015-06-29 10:14:32] QueryDosDevice returned insufficent buffer error; enlarging to 200
 [2015-06-29 10:14:32] QueryDosDevice returned insufficent buffer error; enlarging to 400
 [2015-06-29 10:14:32] QueryDosDevice returned insufficent buffer error; enlarging to 800
 [2015-06-29 10:14:32] QueryDosDevice returned insufficent buffer error; enlarging to 1000
 [2015-06-29 10:14:32] QueryDosDevice returned insufficent buffer error; enlarging to 2000
 [2015-06-29 10:14:32] QueryDosDevice returned insufficent buffer error; enlarging to 4000
 [2015-06-29 10:14:32] lowlevel_scan: Found usb device at usb:003:001 (path=(null), vid=8086, pid=8c31
, manuf=(null), prod=(null), serial=(null))
 [2015-06-29 10:14:32] lowlevel_scan: Found usb device at usb:002:002 (path=(null), vid=8087, pid=8008
, manuf=(null), prod=(null), serial=(null))
 [2015-06-29 10:14:32] lowlevel_scan: Found usb device at usb:001:002 (path=(null), vid=8087, pid=8000
, manuf=(null), prod=(null), serial=(null))
 [2015-06-29 10:14:32] lowlevel_scan: Found usb device at usb:003:006 (path=(null), vid=10c4, pid=ea60
, manuf=(null), prod=(null), serial=(null))
 [2015-06-29 10:14:32] lowlevel_scan: Found usb device at usb:003:002 (path=(null), vid=04d8, pid=00de
, manuf=Microchip Technology Inc., prod=NanoFury NF1 CryptoRig, serial=0000111830)
 [2015-06-29 10:14:32] lowlevel_scan: Found usb device at usb:003:003 (path=(null), vid=04d8, pid=00de
, manuf=Microchip Technology Inc., prod=NanoFury NF1 CryptoRig, serial=0000109749)
 [2015-06-29 10:14:32] lowlevel_scan: Found usb device at usb:003:004 (path=(null), vid=046d, pid=c52b
, manuf=Logitech, prod=USB Receiver, serial=(null))
 [2015-06-29 10:14:32] lowlevel_scan: Found usb device at usb:001:001 (path=(null), vid=8086, pid=8c26
, manuf=(null), prod=(null), serial=(null))
 [2015-06-29 10:14:32] lowlevel_scan: Found usb device at usb:002:001 (path=(null), vid=8086, pid=8c2d
, manuf=(null), prod=(null), serial=(null))
 [2015-06-29 10:14:32] lowlevel_scan: Found hid device at hid:\\?\hid#vid_04d8&pid_00de#6&2dd9c20f&0&0
000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_04d8&pid_00de#6&2dd9c20f&0&0000#{4d1e55b2
-f16f-11cf-88cb-001111000030}, vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury NF1
CryptoRig, serial=0000109749)
 [2015-06-29 10:14:32] lowlevel_scan: Found hid device at hid:\\?\hid#vid_04d8&pid_00de#6&1608e06e&0&0
000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_04d8&pid_00de#6&1608e06e&0&0000#{4d1e55b2
-f16f-11cf-88cb-001111000030}, vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury NF1
CryptoRig, serial=0000111830)
 [2015-06-29 10:14:32] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_02&col03#7&
1af5a895&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_02&col03#7&1
af5a895&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Re
ceiver, serial= )
 [2015-06-29 10:14:32] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_02&col02#7&
1af5a895&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_02&col02#7&1
af5a895&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Re
ceiver, serial= )
 [2015-06-29 10:14:32] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_02&col01#7&
1af5a895&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_02&col01#7&1
af5a895&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Re
ceiver, serial= )
 [2015-06-29 10:14:32] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_01&col04#7&
3321c50&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_01&col04#7&33
21c50&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Rece
iver, serial=   )
 [2015-06-29 10:14:32] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_01&col03#7&
3321c50&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_01&col03#7&33
21c50&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Rece
iver, serial=   )
 [2015-06-29 10:14:32] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_01&col02#7&
3321c50&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_01&col02#7&33
21c50&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Rece
iver, serial=   )
 [2015-06-29 10:14:32] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_01&col01#7&
3321c50&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_01&col01#7&33
21c50&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Rece
iver, serial=   )
 [2015-06-29 10:14:32] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_00#7&27095a
12&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_00#7&27095a12&0&00
00#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, seri
al=     )
 [2015-06-29 10:14:32] lowlevel_scan: Found mcp2210 device at hid:\\?\hid#vid_04d8&pid_00de#6&1608e06e
&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_04d8&pid_00de#6&1608e06e&0&0000#{4d1e
55b2-f16f-11cf-88cb-001111000030}, vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury
NF1 CryptoRig, serial=0000111830)
 [2015-06-29 10:14:32] lowlevel_scan: Found mcp2210 device at hid:\\?\hid#vid_04d8&pid_00de#6&2dd9c20f
&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_04d8&pid_00de#6&2dd9c20f&0&0000#{4d1e
55b2-f16f-11cf-88cb-001111000030}, vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury
NF1 CryptoRig, serial=0000109749)
 [2015-06-29 10:14:32] lowlevel_scan: Found vcom device at com:3 (path=\\.\COM3, vid=0000, pid=0000, m
anuf=(null), prod=(null), serial=(null))
 [2015-06-29 10:14:32] lowlevel_scan: Found vcom device at com:4 (path=\\.\COM4, vid=0000, pid=0000, m
anuf=(null), prod=CP2102 USB to UART Bridge Controller, serial=0001)
 [2015-06-29 10:14:32] erupter: Attempting to open \\.\COM3
 [2015-06-29 10:14:32] erupter: Attempting to open \\.\COM4
 [2015-06-29 10:14:32] Timers: Using QueryPerformanceCounter
 [2015-06-29 10:14:32] Recalibrating timeofday offset (delta 1435596732.9633708s)
 [2015-06-29 10:14:33] erupter: Test failed at \\.\COM4: expected 4 bytes, got 5
 [2015-06-29 10:14:33] erupter: Attempting to open \\.\COM4
 [2015-06-29 10:14:33] erupter: Test failed at \\.\COM4: expected 4 bytes, got 5
 [2015-06-29 10:14:33] icarus: Attempting to open \\.\COM4
 [2015-06-29 10:14:33] icarus: Test failed at \\.\COM4: expected 4 bytes, got 5
 [2015-06-29 10:14:33] cairnsmore: Attempting to open \\.\COM4
 [2015-06-29 10:14:33] cairnsmore: Test failed at \\.\COM4: expected 4 bytes, got 5
 [2015-06-29 10:14:33] antminer: Attempting to open \\.\COM4
 [2015-06-29 10:14:33] antminer: Test succeeded at \\.\COM4: got 000187a2
 [2015-06-29 10:14:33] \\.\COM4: Init: mode=long read_timeout_ms=75 limit=0ms Hs=4.761000e-010
 [2015-06-29 10:14:33] antminer: Work division not specified - autodetecting
 [2015-06-29 10:14:33] antminer: Work division autodetection got 417c0f36 (=4)
 [2015-06-29 10:14:33] Found AMU 0 at \\.\COM4
 [2015-06-29 10:14:33] AMU 0: Init: baud=115200 work_division=0 fpga_count=0

[Luke-Jr]

The exact command is: bfgminer -d? -D -S all
Post the full output in a [ code] block here.

Here's the output, it freezes at the last line and does not return to the command prompt, much like when trying to start the program:

Please repeat with http://luke.dashjr.org/tmp/code/webisect/webisect.php?dobuild=tmp249

[Mikestang]

The exact command is: bfgminer -d? -D -S all
Post the full output in a [ code] block here.

Here's the output, it freezes at the last line and does not return to the command prompt, much like when trying to start the program:

Please repeat with http://luke.dashjr.org/tmp/code/webisect/webisect.php?dobuild=tmp249

Here is the result:

Code:

C:\bfg>bfgminer -d? -D -S all

 [2015-07-02 12:21:03] setrlimit: Not supported by platform
 [2015-07-02 12:21:03] Started bfgminer 5.2.0-1-g65c6399
 [2015-07-02 12:21:03] usb_devinfo_scan: Error opening device usb:002:001: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-07-02 12:21:03] usb_devinfo_scan: Error opening device usb:001:001: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-07-02 12:21:03] usb_devinfo_scan: Error opening device usb:003:009: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-07-02 12:21:03] usb_devinfo_scan: Error opening device usb:001:002: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-07-02 12:21:03] usb_devinfo_scan: Error opening device usb:002:002: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-07-02 12:21:03] usb_devinfo_scan: Error opening device usb:003:001: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-07-02 12:21:03] hidapi_try_lib: Couldn't load libhidapi.dll: unknown
 [2015-07-02 12:21:03] hidapi_try_lib: Successfully loaded libhidapi-0.dll
 [2015-07-02 12:21:03] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-02 12:21:03] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-02 12:21:03] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-02 12:21:03] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-02 12:21:03] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-02 12:21:03] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-02 12:21:03] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-02 12:21:03] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-02 12:21:03] hid_devinfo_scan: Found "NanoFury NF1 CryptoRig" serial "0000111830"
 [2015-07-02 12:21:03] hid_devinfo_scan: Found "NanoFury NF1 CryptoRig" serial "0000109749"
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:03] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-02 12:21:04] Failed to get PortName registry key value in lowl-vcom.c _vcom_devinfo_scan_win
dows__hubport():563: The system cannot find the file specified.
 [2015-07-02 12:21:04] Failed to get PortName registry key value in lowl-vcom.c _vcom_devinfo_scan_win
dows__hubport():563: The system cannot find the file specified.
 [2015-07-02 12:21:04] FTD2XX.DLL failed to load, not using FTDI autodetect
 [2015-07-02 12:21:04] QueryDosDevice returned insufficent buffer error; enlarging to 200
 [2015-07-02 12:21:04] QueryDosDevice returned insufficent buffer error; enlarging to 400
 [2015-07-02 12:21:04] QueryDosDevice returned insufficent buffer error; enlarging to 800
 [2015-07-02 12:21:04] QueryDosDevice returned insufficent buffer error; enlarging to 1000
 [2015-07-02 12:21:04] QueryDosDevice returned insufficent buffer error; enlarging to 2000
 [2015-07-02 12:21:04] QueryDosDevice returned insufficent buffer error; enlarging to 4000
 [2015-07-02 12:21:04] lowlevel_scan: Found usb device at usb:003:001 (path=(null), vid=8086, pid=8c31
, manuf=(null), prod=(null), serial=(null))
 [2015-07-02 12:21:04] lowlevel_scan: Found usb device at usb:002:002 (path=(null), vid=8087, pid=8008
, manuf=(null), prod=(null), serial=(null))
 [2015-07-02 12:21:04] lowlevel_scan: Found usb device at usb:001:002 (path=(null), vid=8087, pid=8000
, manuf=(null), prod=(null), serial=(null))
 [2015-07-02 12:21:04] lowlevel_scan: Found usb device at usb:003:009 (path=(null), vid=10c4, pid=ea60
, manuf=(null), prod=(null), serial=(null))
 [2015-07-02 12:21:04] lowlevel_scan: Found usb device at usb:003:002 (path=(null), vid=04d8, pid=00de
, manuf=Microchip Technology Inc., prod=NanoFury NF1 CryptoRig, serial=0000111830)
 [2015-07-02 12:21:04] lowlevel_scan: Found usb device at usb:003:003 (path=(null), vid=04d8, pid=00de
, manuf=Microchip Technology Inc., prod=NanoFury NF1 CryptoRig, serial=0000109749)
 [2015-07-02 12:21:04] lowlevel_scan: Found usb device at usb:003:004 (path=(null), vid=046d, pid=c52b
, manuf=Logitech, prod=USB Receiver, serial=(null))
 [2015-07-02 12:21:04] lowlevel_scan: Found usb device at usb:001:001 (path=(null), vid=8086, pid=8c26
, manuf=(null), prod=(null), serial=(null))
 [2015-07-02 12:21:04] lowlevel_scan: Found usb device at usb:002:001 (path=(null), vid=8086, pid=8c2d
, manuf=(null), prod=(null), serial=(null))
 [2015-07-02 12:21:04] lowlevel_scan: Found hid device at hid:\\?\hid#vid_04d8&pid_00de#6&2dd9c20f&0&0
000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_04d8&pid_00de#6&2dd9c20f&0&0000#{4d1e55b2
-f16f-11cf-88cb-001111000030}, vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury NF1
CryptoRig, serial=0000109749)
 [2015-07-02 12:21:04] lowlevel_scan: Found hid device at hid:\\?\hid#vid_04d8&pid_00de#6&1608e06e&0&0
000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_04d8&pid_00de#6&1608e06e&0&0000#{4d1e55b2
-f16f-11cf-88cb-001111000030}, vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury NF1
CryptoRig, serial=0000111830)
 [2015-07-02 12:21:04] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_02&col03#7&
1af5a895&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_02&col03#7&1
af5a895&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Re
ceiver, serial= )
 [2015-07-02 12:21:04] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_02&col02#7&
1af5a895&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_02&col02#7&1
af5a895&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Re
ceiver, serial= )
 [2015-07-02 12:21:04] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_02&col01#7&
1af5a895&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_02&col01#7&1
af5a895&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Re
ceiver, serial= )
 [2015-07-02 12:21:04] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_01&col04#7&
3321c50&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_01&col04#7&33
21c50&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Rece
iver, serial=   )
 [2015-07-02 12:21:04] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_01&col03#7&
3321c50&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_01&col03#7&33
21c50&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Rece
iver, serial=   )
 [2015-07-02 12:21:04] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_01&col02#7&
3321c50&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_01&col02#7&33
21c50&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Rece
iver, serial=   )
 [2015-07-02 12:21:04] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_01&col01#7&
3321c50&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_01&col01#7&33
21c50&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Rece
iver, serial=   )
 [2015-07-02 12:21:04] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_00#7&27095a
12&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_00#7&27095a12&0&00
00#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, seri
al=     )
 [2015-07-02 12:21:04] lowlevel_scan: Found mcp2210 device at hid:\\?\hid#vid_04d8&pid_00de#6&1608e06e
&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_04d8&pid_00de#6&1608e06e&0&0000#{4d1e
55b2-f16f-11cf-88cb-001111000030}, vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury
NF1 CryptoRig, serial=0000111830)
 [2015-07-02 12:21:04] lowlevel_scan: Found mcp2210 device at hid:\\?\hid#vid_04d8&pid_00de#6&2dd9c20f
&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_04d8&pid_00de#6&2dd9c20f&0&0000#{4d1e
55b2-f16f-11cf-88cb-001111000030}, vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury
NF1 CryptoRig, serial=0000109749)
 [2015-07-02 12:21:04] lowlevel_scan: Found vcom device at com:3 (path=\\.\COM3, vid=0000, pid=0000, m
anuf=(null), prod=(null), serial=(null))
 [2015-07-02 12:21:04] lowlevel_scan: Found vcom device at com:4 (path=\\.\COM4, vid=0000, pid=0000, m
anuf=Silicon Labs, prod=CP2102 USB to UART Bridge Controller, serial=0001)
 [2015-07-02 12:21:04] erupter: Attempting to open \\.\COM3
 [2015-07-02 12:21:04] erupter: Attempting to open \\.\COM4
 [2015-07-02 12:21:04] \\.\COM4 open: fd=3
 [2015-07-02 12:21:04] \\.\COM4 begin write1
 [2015-07-02 12:21:04] \\.\COM4 end write1
 [2015-07-02 12:21:04] Timers: Using QueryPerformanceCounter
 [2015-07-02 12:21:04] Recalibrating timeofday offset (delta 1435596729.993778s)
 [2015-07-02 12:21:04] \\.\COM4 begin read1
 [2015-07-02 12:21:04] \\.\COM3 open: fd=4
 [2015-07-02 12:21:04] \\.\COM3 begin write1
 [2015-07-02 12:21:04] \\.\COM3 end write1
 [2015-07-02 12:21:04] \\.\COM3 begin read1
 [2015-07-02 12:21:04] \\.\COM4 end read1
 [2015-07-02 12:21:04] \\.\COM4 begin excess1
 [2015-07-02 12:21:04] \\.\COM4 end excess1
 [2015-07-02 12:21:04] \\.\COM4 begin close1
 [2015-07-02 12:21:04] \\.\COM4 end close1
 [2015-07-02 12:21:04] erupter: Test failed at \\.\COM4: expected 4 bytes, got 5
 [2015-07-02 12:21:04] erupter: Attempting to open \\.\COM4
 [2015-07-02 12:21:04] \\.\COM3: No data in 0.100 seconds
 [2015-07-02 12:21:04] \\.\COM3 end read1
 [2015-07-02 12:21:04] \\.\COM3 begin excess1
 [2015-07-02 12:21:04] \\.\COM4 open: fd=3
 [2015-07-02 12:21:04] \\.\COM4 begin write1
 [2015-07-02 12:21:04] \\.\COM4 end write1
 [2015-07-02 12:21:04] \\.\COM4 begin read1
 [2015-07-02 12:21:04] \\.\COM4 end read1
 [2015-07-02 12:21:04] \\.\COM4 begin excess1
 [2015-07-02 12:21:04] \\.\COM4 end excess1
 [2015-07-02 12:21:04] \\.\COM4 begin close1
 [2015-07-02 12:21:04] \\.\COM3 end excess1
 [2015-07-02 12:21:04] \\.\COM4 end close1
 [2015-07-02 12:21:04] \\.\COM3 begin close1
 [2015-07-02 12:21:04] erupter: Test failed at \\.\COM4: expected 4 bytes, got 5
 [2015-07-02 12:21:04] icarus: Attempting to open \\.\COM4
 [2015-07-02 12:21:04] \\.\COM4 open: fd=3
 [2015-07-02 12:21:04] \\.\COM4 begin write1
 [2015-07-02 12:21:04] \\.\COM4 end write1
 [2015-07-02 12:21:04] \\.\COM4 begin read1
 [2015-07-02 12:21:04] \\.\COM3 end close1
 [2015-07-02 12:21:04] erupter: Test failed at \\.\COM3: get 00000000, should: 000187a2
 [2015-07-02 12:21:04] erupter: Attempting to open \\.\COM3
 [2015-07-02 12:21:04] \\.\COM3 open: fd=4
 [2015-07-02 12:21:04] \\.\COM3 begin write1
 [2015-07-02 12:21:04] \\.\COM3 end write1
 [2015-07-02 12:21:04] \\.\COM3 begin read1
 [2015-07-02 12:21:04] \\.\COM4 end read1
 [2015-07-02 12:21:04] \\.\COM4 begin excess1
 [2015-07-02 12:21:04] \\.\COM4 end excess1
 [2015-07-02 12:21:04] \\.\COM4 begin close1
 [2015-07-02 12:21:04] \\.\COM4 end close1
 [2015-07-02 12:21:04] icarus: Test failed at \\.\COM4: expected 4 bytes, got 5
 [2015-07-02 12:21:04] cairnsmore: Attempting to open \\.\COM4
 [2015-07-02 12:21:04] \\.\COM4 open: fd=3
 [2015-07-02 12:21:04] \\.\COM4 begin write1
 [2015-07-02 12:21:04] \\.\COM4 end write1
 [2015-07-02 12:21:04] \\.\COM4 begin read1
 [2015-07-02 12:21:04] \\.\COM3: No data in 0.101 seconds
 [2015-07-02 12:21:04] \\.\COM3 end read1
 [2015-07-02 12:21:04] \\.\COM3 begin excess1
 [2015-07-02 12:21:04] \\.\COM4 end read1
 [2015-07-02 12:21:04] \\.\COM4 begin excess1
 [2015-07-02 12:21:04] \\.\COM4 end excess1
 [2015-07-02 12:21:04] \\.\COM4 begin close1
 [2015-07-02 12:21:04] \\.\COM4 end close1
 [2015-07-02 12:21:04] cairnsmore: Test failed at \\.\COM4: expected 4 bytes, got 5
 [2015-07-02 12:21:04] antminer: Attempting to open \\.\COM4
 [2015-07-02 12:21:04] \\.\COM4 open: fd=3
 [2015-07-02 12:21:04] \\.\COM4 begin write1
 [2015-07-02 12:21:04] \\.\COM4 end write1
 [2015-07-02 12:21:04] \\.\COM4 begin read1
 [2015-07-02 12:21:04] \\.\COM3 end excess1
 [2015-07-02 12:21:04] \\.\COM3 begin close1
 [2015-07-02 12:21:04] \\.\COM3 end close1
 [2015-07-02 12:21:04] erupter: Test failed at \\.\COM3: get 00000000, should: 000187a2
 [2015-07-02 12:21:04] icarus: Attempting to open \\.\COM3
 [2015-07-02 12:21:04] \\.\COM3 open: fd=4
 [2015-07-02 12:21:04] \\.\COM3 begin write1
 [2015-07-02 12:21:04] \\.\COM3 end write1
 [2015-07-02 12:21:04] \\.\COM3 begin read1
 [2015-07-02 12:21:04] \\.\COM4 end read1
 [2015-07-02 12:21:04] \\.\COM4 begin excess1
 [2015-07-02 12:21:04] \\.\COM4 end excess1
 [2015-07-02 12:21:04] \\.\COM4 begin close1
 [2015-07-02 12:21:04] \\.\COM4 end close1
 [2015-07-02 12:21:04] antminer: Test succeeded at \\.\COM4: got 000187a2
 [2015-07-02 12:21:04] \\.\COM4: Init: mode=long read_timeout_ms=75 limit=0ms Hs=4.761000e-010
 [2015-07-02 12:21:04] antminer: Work division not specified - autodetecting
 [2015-07-02 12:21:04] antminer: Work division autodetection got 417c0f36 (=4)
 [2015-07-02 12:21:04] Found AMU 0 at \\.\COM4
 [2015-07-02 12:21:04] AMU 0: Init: baud=115200 work_division=0 fpga_count=0
 [2015-07-02 12:21:04] \\.\COM3: No data in 0.101 seconds
 [2015-07-02 12:21:04] \\.\COM3 end read1
 [2015-07-02 12:21:04] \\.\COM3 begin excess1
 [2015-07-02 12:21:04] \\.\COM3 end excess1
 [2015-07-02 12:21:04] \\.\COM3 begin close1
 [2015-07-02 12:21:04] \\.\COM3 end close1
 [2015-07-02 12:21:04] icarus: Test failed at \\.\COM3: get 00000000, should: 000187a2
 [2015-07-02 12:21:04] cairnsmore: Attempting to open \\.\COM3
 [2015-07-02 12:21:04] \\.\COM3 open: fd=3
 [2015-07-02 12:21:04] \\.\COM3 begin write1
 [2015-07-02 12:21:04] \\.\COM3 end write1
 [2015-07-02 12:21:04] \\.\COM3 begin read1
 [2015-07-02 12:21:05] \\.\COM3: No data in 0.101 seconds
 [2015-07-02 12:21:05] \\.\COM3 end read1
 [2015-07-02 12:21:05] \\.\COM3 begin excess1
 [2015-07-02 12:21:05] \\.\COM3 end excess1
 [2015-07-02 12:21:05] \\.\COM3 begin close1
 [2015-07-02 12:21:05] \\.\COM3 end close1
 [2015-07-02 12:21:05] cairnsmore: Test failed at \\.\COM3: get 00000000, should: 000187a2
 [2015-07-02 12:21:05] antminer: Attempting to open \\.\COM3
 [2015-07-02 12:21:05] \\.\COM3 open: fd=3
 [2015-07-02 12:21:05] \\.\COM3 begin write1
 [2015-07-02 12:21:05] \\.\COM3 end write1
 [2015-07-02 12:21:05] \\.\COM3 begin read1
 [2015-07-02 12:21:05] \\.\COM3: No data in 0.101 seconds
 [2015-07-02 12:21:05] \\.\COM3 end read1
 [2015-07-02 12:21:05] \\.\COM3 begin excess1
 [2015-07-02 12:21:05] \\.\COM3 end excess1
 [2015-07-02 12:21:05] \\.\COM3 begin close1
 [2015-07-02 12:21:05] \\.\COM3 end close1
 [2015-07-02 12:21:05] antminer: Test failed at \\.\COM3: get 00000000, should: 000187a2
 [2015-07-02 12:21:05] twinfury: Probing for Twinfury device \\.\COM3
 [2015-07-02 12:21:07] twinfury: Not a valid response from device (-1)
 [2015-07-02 12:21:07] dualminer: Attempting to open \\.\COM3
 [2015-07-02 12:21:07] \\.\COM3 open: fd=3
 [2015-07-02 12:21:08] \\.\COM3 begin write1
 [2015-07-02 12:21:08] \\.\COM3 end write1
 [2015-07-02 12:21:08] \\.\COM3 begin read1
 [2015-07-02 12:21:08] \\.\COM3: No data in 0.101 seconds
 [2015-07-02 12:21:08] \\.\COM3 end read1
 [2015-07-02 12:21:08] \\.\COM3 begin excess1
 [2015-07-02 12:21:08] \\.\COM3 end excess1
 [2015-07-02 12:21:08] \\.\COM3 begin close1
 [2015-07-02 12:21:08] \\.\COM3 end close1
 [2015-07-02 12:21:08] dualminer: Test failed at \\.\COM3: get 00000000, should: a2870100
 [2015-07-02 12:21:08] BFL: Attempting to open \\.\COM3
 [2015-07-02 12:21:09] BFL: Error reading/timeout (ZGX)
 [2015-07-02 12:21:09] drillbit_detect_one: \\.\COM3: Short read in response to 'I'
 [2015-07-02 12:21:09] klondike_lowl_probe_custom: Matched "(null)" serial "(null)", but lowlevel driv
er is not usb!
 [2015-07-02 12:21:09] klondike_lowl_probe_custom: Matched "(null)" serial "(null)", but lowlevel driv
er is not usb!
 [2015-07-02 12:21:11] ModMiner detect: no response to version request from \\.\COM3
 [2015-07-02 12:21:11] x6500_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not
ft232r!
 [2015-07-02 12:21:11] ztex_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not u
sb!
 [2015-07-02 12:21:11] bifury: Successfully opened \\.\COM3
 [2015-07-02 12:21:13] bifury: Timed out waiting for response to version request
 [2015-07-02 12:21:13] bfx_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not ft
232r!
 [2015-07-02 12:21:13] littlefury: Successfully opened \\.\COM3
 [2015-07-02 12:21:14] Read of fd 3 returned 0
 [2015-07-02 12:21:14] littlefury: DEVPROTO: RECV
 [2015-07-02 12:21:14] littlefury: Failed to read correct packet header
 [2015-07-02 12:21:14] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is n
ot mcp2210!
 [2015-07-02 12:21:14] hashbuster_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is
 not hid!
 [2015-07-02 12:21:14] hashbusterusb_lowl_probe: Matched "(null)" com:3, but lowlevel driver is not us
b_generic!
 [2015-07-02 12:21:24] hashfast_detect_one: Failed to parse response on \\.\COM3
 [2015-07-02 12:21:25] rockminer: Successfully opened \\.\COM3
 [2015-07-02 12:21:25] rockminer: Short read from \\.\COM3 (0)
 [2015-07-02 12:21:25] Devices detected:
 [2015-07-02 12:21:25]  CP2102 USB to UART Bridge Controller by Silicon Labs (driver=antminer; procs=4
; serial=0001; path=\\.\COM4)
 [2015-07-02 12:21:25]  NanoFury NF1 CryptoRig by Microchip Technology Inc. (driver=nanofury; procs=1;
 serial=0000111830; path=\\?\hid#vid_04d8&pid_00de#6&1608e06e&0&0000#{4d1e55b2-f16f-11cf-88cb-00111100
0030})
 [2015-07-02 12:21:25]  NanoFury NF1 CryptoRig by Microchip Technology Inc. (driver=nanofury; procs=1;
 serial=0000109749; path=\\?\hid#vid_04d8&pid_00de#6&2dd9c20f&0&0000#{4d1e55b2-f16f-11cf-88cb-00111100
0030})
3 devices listed

C:\bfg>

[Luke-Jr]

The exact command is: bfgminer -d? -D -S all
Post the full output in a [ code] block here.

Here's the output, it freezes at the last line and does not return to the command prompt, much like when trying to start the program:

Please repeat with http://luke.dashjr.org/tmp/code/webisect/webisect.php?dobuild=tmp249

Here is the result:

Eh? It's no longer hanging... :/

[Mikestang]

The exact command is: bfgminer -d? -D -S all
Post the full output in a [ code] block here.

Here's the output, it freezes at the last line and does not return to the command prompt, much like when trying to start the program:

Please repeat with http://luke.dashjr.org/tmp/code/webisect/webisect.php?dobuild=tmp249

Here is the result:

Eh? It's no longer hanging... :/

I tried that same test again and it hung, but when I unplugged the U3 usb and plugged it back in again it ran through to completion again.  I actually didn't try launching the bisect version with my normal batch file, I'll try that and hopefully it fires up just fine.

[Mikestang]

Eh? It's no longer hanging... :/

I tried that same test again and it hung, but when I unplugged the U3 usb and plugged it back in again it ran through to completion again.  I actually didn't try launching the bisect version with my normal batch file, I'll try that and hopefully it fires up just fine.

Still hanging, unfortunately.


Ran the debug scan without the U3 plugged in, I think there must be some issue with this particular computer.  Here's the output up to where it hangs.

Code:

C:\bfgminer520a>bfgminer -d? -D -S all

 [2015-07-09 15:40:00] setrlimit: Not supported by platform
 [2015-07-09 15:40:00] Started bfgminer 5.2.0-1-g65c6399
 [2015-07-09 15:40:00] usb_devinfo_scan: Error opening device usb:002:001: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-07-09 15:40:00] usb_devinfo_scan: Error opening device usb:001:001: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-07-09 15:40:00] usb_devinfo_scan: Error opening device usb:001:002: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-07-09 15:40:00] usb_devinfo_scan: Error opening device usb:002:002: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-07-09 15:40:00] usb_devinfo_scan: Error opening device usb:003:001: LIBUSB_ERROR_NOT_SUPPORTED
 [2015-07-09 15:40:00] hidapi_try_lib: Couldn't load libhidapi.dll: unknown
 [2015-07-09 15:40:00] hidapi_try_lib: Successfully loaded libhidapi-0.dll
 [2015-07-09 15:40:00] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-09 15:40:00] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-09 15:40:00] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-09 15:40:00] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-09 15:40:00] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-09 15:40:00] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-09 15:40:00] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-09 15:40:00] hid_devinfo_scan: Found "USB Receiver" serial "  "
 [2015-07-09 15:40:00] hid_devinfo_scan: Found "NanoFury NF1 CryptoRig" serial "0000111830"
 [2015-07-09 15:40:00] hid_devinfo_scan: Found "NanoFury NF1 CryptoRig" serial "0000109749"
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to SetupDiEnumDeviceInterfaces in lowl-mswin.c mswin_devinfo_scan():47:
No more data is available.
 [2015-07-09 15:40:00] Failed to get PortName registry key value in lowl-vcom.c _vcom_devinfo_scan_win
dows__hubport():563: The system cannot find the file specified.
 [2015-07-09 15:40:00] Failed to get PortName registry key value in lowl-vcom.c _vcom_devinfo_scan_win
dows__hubport():563: The system cannot find the file specified.
 [2015-07-09 15:40:00] FTD2XX.DLL failed to load, not using FTDI autodetect
 [2015-07-09 15:40:00] QueryDosDevice returned insufficent buffer error; enlarging to 200
 [2015-07-09 15:40:00] QueryDosDevice returned insufficent buffer error; enlarging to 400
 [2015-07-09 15:40:00] QueryDosDevice returned insufficent buffer error; enlarging to 800
 [2015-07-09 15:40:00] QueryDosDevice returned insufficent buffer error; enlarging to 1000
 [2015-07-09 15:40:00] QueryDosDevice returned insufficent buffer error; enlarging to 2000
 [2015-07-09 15:40:00] QueryDosDevice returned insufficent buffer error; enlarging to 4000
 [2015-07-09 15:40:00] lowlevel_scan: Found usb device at usb:003:001 (path=(null), vid=8086, pid=8c31
, manuf=(null), prod=(null), serial=(null))
 [2015-07-09 15:40:00] lowlevel_scan: Found usb device at usb:002:002 (path=(null), vid=8087, pid=8008
, manuf=(null), prod=(null), serial=(null))
 [2015-07-09 15:40:00] lowlevel_scan: Found usb device at usb:001:002 (path=(null), vid=8087, pid=8000
, manuf=(null), prod=(null), serial=(null))
 [2015-07-09 15:40:00] lowlevel_scan: Found usb device at usb:003:002 (path=(null), vid=04d8, pid=00de
, manuf=Microchip Technology Inc., prod=NanoFury NF1 CryptoRig, serial=0000111830)
 [2015-07-09 15:40:00] lowlevel_scan: Found usb device at usb:003:003 (path=(null), vid=04d8, pid=00de
, manuf=Microchip Technology Inc., prod=NanoFury NF1 CryptoRig, serial=0000109749)
 [2015-07-09 15:40:00] lowlevel_scan: Found usb device at usb:003:004 (path=(null), vid=046d, pid=c52b
, manuf=Logitech, prod=USB Receiver, serial=(null))
 [2015-07-09 15:40:00] lowlevel_scan: Found usb device at usb:001:001 (path=(null), vid=8086, pid=8c26
, manuf=(null), prod=(null), serial=(null))
 [2015-07-09 15:40:00] lowlevel_scan: Found usb device at usb:002:001 (path=(null), vid=8086, pid=8c2d
, manuf=(null), prod=(null), serial=(null))
 [2015-07-09 15:40:00] lowlevel_scan: Found hid device at hid:\\?\hid#vid_04d8&pid_00de#6&2dd9c20f&0&0
000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_04d8&pid_00de#6&2dd9c20f&0&0000#{4d1e55b2
-f16f-11cf-88cb-001111000030}, vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury NF1
CryptoRig, serial=0000109749)
 [2015-07-09 15:40:00] lowlevel_scan: Found hid device at hid:\\?\hid#vid_04d8&pid_00de#6&1608e06e&0&0
000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_04d8&pid_00de#6&1608e06e&0&0000#{4d1e55b2
-f16f-11cf-88cb-001111000030}, vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury NF1
CryptoRig, serial=0000111830)
 [2015-07-09 15:40:00] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_02&col03#7&
1af5a895&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_02&col03#7&1
af5a895&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Re
ceiver, serial= )
 [2015-07-09 15:40:00] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_02&col02#7&
1af5a895&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_02&col02#7&1
af5a895&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Re
ceiver, serial= )
 [2015-07-09 15:40:00] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_02&col01#7&
1af5a895&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_02&col01#7&1
af5a895&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Re
ceiver, serial= )
 [2015-07-09 15:40:00] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_01&col04#7&
3321c50&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_01&col04#7&33
21c50&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Rece
iver, serial=   )
 [2015-07-09 15:40:00] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_01&col03#7&
3321c50&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_01&col03#7&33
21c50&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Rece
iver, serial=   )
 [2015-07-09 15:40:00] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_01&col02#7&
3321c50&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_01&col02#7&33
21c50&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Rece
iver, serial=   )
 [2015-07-09 15:40:00] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_01&col01#7&
3321c50&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_01&col01#7&33
21c50&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Rece
iver, serial=   )
 [2015-07-09 15:40:00] lowlevel_scan: Found hid device at hid:\\?\hid#vid_046d&pid_c52b&mi_00#7&27095a
12&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_046d&pid_c52b&mi_00#7&27095a12&0&00
00#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, seri
al=     )
 [2015-07-09 15:40:00] lowlevel_scan: Found mcp2210 device at hid:\\?\hid#vid_04d8&pid_00de#6&1608e06e
&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_04d8&pid_00de#6&1608e06e&0&0000#{4d1e
55b2-f16f-11cf-88cb-001111000030}, vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury
NF1 CryptoRig, serial=0000111830)
 [2015-07-09 15:40:00] lowlevel_scan: Found mcp2210 device at hid:\\?\hid#vid_04d8&pid_00de#6&2dd9c20f
&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#vid_04d8&pid_00de#6&2dd9c20f&0&0000#{4d1e
55b2-f16f-11cf-88cb-001111000030}, vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury
NF1 CryptoRig, serial=0000109749)
 [2015-07-09 15:40:00] lowlevel_scan: Found vcom device at com:3 (path=\\.\COM3, vid=0000, pid=0000, m
anuf=(null), prod=(null), serial=(null))
 [2015-07-09 15:40:00] erupter: Attempting to open \\.\COM3
 [2015-07-09 15:40:00] \\.\COM3 open: fd=3
 [2015-07-09 15:40:00] \\.\COM3 begin write1
 [2015-07-09 15:40:00] \\.\COM3 end write1
 [2015-07-09 15:40:00] Timers: Using QueryPerformanceCounter
 [2015-07-09 15:40:00] Recalibrating timeofday offset (delta 1436199479.9390537s)
 [2015-07-09 15:40:00] \\.\COM3 begin read1

I will continue using -S antminer@0001 and trying to get the U3 to run, I am not having any luck getting it operational, let alone running stable, but at least I can get bfg to recognize it this way.  I'll keep trying, hopefully you will have time/motivation to get the U3 working a bit better in a future release, thank you for your help!

[Luke-Jr]

Mikestang, please try http://luke.dashjr.org/tmp/code/webisect/webisect.php?dobuild=bfgminer

[Mikestang]

Thanks, I'll give that one a shot and report back.

A separate question, even though the U3 reports DEAD, it still seems to be hashing, the number to the right of the slash updates like the unit is working; albeit not at 60GH, but right now if I can get it to run stable at all I'll be happy.

[Luke-Jr]

Thanks, I'll give that one a shot and report back.

A separate question, even though the U3 reports DEAD, it still seems to be hashing, the number to the right of the slash updates like the unit is working; albeit not at 60GH, but right now if I can get it to run stable at all I'll be happy.

That's how averages work..

[Putte]

Hello!

Maybe a stupid question, but I did not find an answer from forum or any other sources.
I am quite new in mining and I like to know is bfgminer mining like a small pool when mining solo? So if I have for ex 4 miners, does bfgminer use those to mine like a one miner with hashrate of their all or is it mining all 4 miners individually?

[Luke-Jr]

Hello!

Maybe a stupid question, but I did not find an answer from forum or any other sources.
I am quite new in mining and I like to know is bfgminer mining like a small pool when mining solo? So if I have for ex 4 miners, does bfgminer use those to mine like a one miner with hashrate of their all or is it mining all 4 miners individually?

There is no difference.

[Putte]

Hello!

Maybe a stupid question, but I did not find an answer from forum or any other sources.
I am quite new in mining and I like to know is bfgminer mining like a small pool when mining solo? So if I have for ex 4 miners, does bfgminer use those to mine like a one miner with hashrate of their all or is it mining all 4 miners individually?

There is no difference.

Ok, thanks for answer. And thanks for a great software.

[wolfey2014]

Hello,
has anyone had any trouble with driving their Zeus miners with the latest version of BFGminer? I just upgraded (not so far) from ver' 4.2.1 to 5.2.0 which also uses slightly different syntax in the command line.
I am mining via nicehash.com and with version 4.2.1 there are no issues when starting or running the mining program.
But when I start mining with ver' 5.2.0, my psu's overload and quit!
It seems that 5.2.0 is causing a huge power surge at startup where previous versions are totally fine and cause NO issues at all!
Anyone got a fix for this issue?
I'm sure it's a programming error somewhere in the startup code. Or are there any commands I am missing?
I used the command line suggestions for ASIC miners in the readme-ASIC txt and all commands are correct.
I don't see anything in the commands to cause or prevent this startup overload issue.
The reason I am trying to use 5.2.0 is that nicehash wants me to use their extra nonce command #/xnsub command for better efficiency and I guess a few more accepts per cycle than without it.
Thanks for any advice or suggestions you may have in advance!

[wolfey2014]

Hello,
has anyone had any trouble with driving their Zeus miners with the latest version of BFGminer? I just upgraded (not so far) from ver' 4.2.1 to 5.2.0 which also uses slightly different syntax in the command line.
I am mining via nicehash.com and with version 4.2.1 there are no issues when starting or running the mining program.
But when I start mining with ver' 5.2.0, my psu's overload and quit!
It seems that 5.2.0 is causing a huge power surge at startup where previous versions are totally fine and cause NO issues at all!
Anyone got a fix for this issue?
I'm sure it's a programming error somewhere in the startup code. Or are there any commands I am missing?
I used the command line suggestions for ASIC miners in the readme-ASIC txt and all commands are correct.
I don't see anything in the commands to cause or prevent this startup overload issue.
The reason I am trying to use 5.2.0 is that nicehash wants me to use their extra nonce command #/xnsub command for better efficiency and I guess a few more accepts per cycle than without it.
Thanks for any advice or suggestions you may have in advance!

Sorry guys, here's the command line I am using....

bfgminer --scrypt -o stratum+tcp://scrypt.usa.nicehash.com:3333/#xnsub -u yeahtryit -p d=1024 --set zeusminer:clock=151 -S zeusminer:\\.\COM106 -S zeusminer:\\.\COM222 -S zeusminer:\\.\COM151 --set zeusminer:chips=640

Some names have been changed to protect my ars from hackers

[koinsuka]

are this software can running well at os linux android?

[Muhammed Zakir]

are this software can running well at os linux android?

It is running well for Windows, OS X and linux but not for android. You can't mine using an android phone. However, you can connect miner(s) to android phone and mine using it but it won't be effective.

[Luke-Jr]

are this software can running well at os linux android?

It is running well for Windows, OS X and linux but not for android. You can't mine using an android phone. However, you can connect miner(s) to android phone and mine using it but it won't be effective.

Eh, most Android devices should be better than a Raspberry Pi at least.