LPape
Member
Offline
Activity: 84
Merit: 10
|
|
March 31, 2016, 04:20:18 PM |
|
I am trying to add my antminer 3+ device and I am using this line it isn't working can anyone please help.
-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3 --set btm:clock=350 --set btm:reg_data=0d82 --set btm:voltage=x0725
|
|
|
|
|
|
|
|
|
The grue lurks in the darkest places of the earth. Its favorite diet is adventurers, but its insatiable appetite is tempered by its fear of light. No grue has ever been seen by the light of day, and few have survived its fearsome jaws to tell the tale.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
March 31, 2016, 06:08:42 PM Last edit: March 31, 2016, 06:25:55 PM by toptek |
|
I am trying to add my antminer 3+ device and I am using this line it isn't working can anyone please help.
-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3 --set btm:clock=350 --set btm:reg_data=0d82 --set btm:voltage=x0725
should be is some thing else i forget what i think. layout not to sure about the rest looks about right. I get bfg to work with no S3 hashing gave up a long time ago ..if you get it to work gratz ..
|
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
March 31, 2016, 06:22:46 PM |
|
I need more details on antminer problems to try to help.
|
|
|
|
LPape
Member
Offline
Activity: 84
Merit: 10
|
|
March 31, 2016, 06:26:17 PM |
|
I am trying to add my antminer 3+ device and I am using this line it isn't working can anyone please help.
-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3 --set btm:clock=350 --set btm:reg_data=0d82 --set btm:voltage=x0725
should be is some thing else i forget what i think. layout not to sure about the rest looks about right. I get bfg to work with no S3 hashing gave up a long time ago ..if you get it to work gratz .. I will try that out I think you mean it should look like this -S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3 --set btm:clock=225 --set btm:timeout= --set btm:voltage=x0725
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
March 31, 2016, 06:32:32 PM Last edit: March 31, 2016, 06:44:43 PM by toptek |
|
I need more details on antminer problems to try to help.
A lot of pages back I posted s few times with what i tried and did, no one seemed to care , I even asked some one in a PM that seemed cool he was a real ass hole . no it was not ( luke ) you i asked . after that i figured you either did not have time or wanted cash no dis respect intended or real life things were stopping you .I gave up and didn't push it.
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
March 31, 2016, 06:34:32 PM |
|
I am trying to add my antminer 3+ device and I am using this line it isn't working can anyone please help.
-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3 --set btm:clock=350 --set btm:reg_data=0d82 --set btm:voltage=x0725
should be is some thing else i forget what i think. layout not to sure about the rest looks about right. I get bfg to work with no S3 hashing gave up a long time ago ..if you get it to work gratz .. I will try that out I think you mean it should look like this -S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3 --set btm:clock=225 --set btm:timeout= --set btm:voltage=x0725 sure if you need it like that . -S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3 --set btm:clock=225 --set btm:timeout=18 --set btm:voltage=x0725 IS you may need also or like this. -S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=18 --set btm:clock=225 --set btm:reg_data=0d82 --set btm:voltage=x0725 only one im not rally to sure about is or what it even does. and can be why mine won't hash, can't say. I formated the answer that way to make it easy to see code from talk etc .
|
|
|
|
LPape
Member
Offline
Activity: 84
Merit: 10
|
|
March 31, 2016, 06:44:02 PM |
|
I need more details on antminer problems to try to help.
I load up bfgminer, press M than press +. I add the following code to find my device. -S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3 --set btm:clock=225 --set btm:timeout=18 --set btm:voltage=x0725. Press enter it does not find anything S3+ antminer on windows 7. Bfgminer 5.4.2
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
March 31, 2016, 06:49:02 PM |
|
I need more details on antminer problems to try to help.
I load up bfgminer, press M than press +. I add the following code to find my device. -S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3 --set btm:clock=225 --set btm:timeout=18 --set btm:voltage=x0725. Press enter it does not find anything S3+ antminer on windows 7. Bfgminer 5.4.2 how do you run s3 on windows 7?
|
|
|
|
LPape
Member
Offline
Activity: 84
Merit: 10
|
|
March 31, 2016, 06:51:20 PM |
|
you have to find it on your router and you go to a web page that just is a form of cgminer
I got a device to show but not hash
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
March 31, 2016, 06:52:16 PM |
|
Those setting i got out of the pdf for that chip
and that is my issue to it works but won't hash or see the S1/3 . and the drivers are loaded i checked with the cat command .
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
March 31, 2016, 06:57:27 PM |
|
you have to find it on your router and you go to a web page that just is a form of cgminer
I got a device to show but not hash
With SSH i assume ? . use screen but the S3 does not have screen on it like the S2/4 c1 s5 i think S7 . it's a bitch to get working right on a S3 i think i had screen on it once after i figured out what openwrt PKG i needed @aarons6 you can start it that way in all most any windows version 7 and up . but have to use a ssh window is how he did, I'm guessing .
|
|
|
|
LPape
Member
Offline
Activity: 84
Merit: 10
|
|
March 31, 2016, 07:05:37 PM |
|
If anyone can get me the answer I do have some coins.
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
March 31, 2016, 07:09:11 PM Last edit: March 31, 2016, 07:59:51 PM by toptek |
|
If anyone can get me the answer I do have some coins.
forgot to add i even tired using nothing . you may want to follow this to if he does it https://bitcointalk.org/index.php?topic=1405821.0I bet we can add BFG with no issue
|
|
|
|
LPape
Member
Offline
Activity: 84
Merit: 10
|
|
March 31, 2016, 09:13:10 PM |
|
I am trying to build a config file maybe that will help.
"pass" : "12345678", "pool-priority" : "0" }, { "url" : "stratum+tcp://stratum.f2pool.com:25", "user" : "indigopsy.antminer", "pass" : "12345678", "pool-priority" : "1" }, { "url" : "stratum+tcp://stratum.antpool.com:3333", "user" : "indigoant.antminer", "pass" : "12345678", "pool-priority" : "2" }, { "url" : "stratum+tcp://stratum.antpool.com:25", "user" : "indigoant.antminer", "pass" : "12345678", "pool-priority" : "3" } ] , "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "1", "expiry-lp" : "3600", "failover-switch-delay" : "300", "log" : "20", "no-pool-disable" : true, "no-client-reconnect" : true, "no-show-processors" : true, "no-show-procs" : true, "no-unicode" : true, "queue" : "0", "quiet-work-updates" : true, "quiet-work-update" : true, "scan-time" : "1", "skip-security-checks" : "0", "submit-stale" : true, "temp-hysteresis" : "3", "shares" : 0, "kernel-path" : "/usr/local/share/bfgminer", "scan" : [ "antminer:all" ], "set-device" : [ "antminer:voltage=x830", "antminer:clock=x982", "antminer:timing=0.0054" ] }
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
March 31, 2016, 09:35:45 PM Last edit: March 31, 2016, 09:49:01 PM by toptek |
|
just found two new openwrt antminer s3 bin on openwrt download page , and of course they won't flash because bitmain locked the bin so it won't but that's not a issue just use telnet to flash it . and i know i may brick the controller .that said wtf why not . https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/openwrt-ar71xx-generic-antminer-s3-squashfs-factory openwrt-ar71xx-generic-antminer-s3-squashfs-sysupgrade I flashed a locked TLink router about a month ago and did it from there normal locked firmware to open wrt then messed the router up tying other stuff but the flash worked i had my A4 mining on it for a while till i got brave wanted to try some thing else.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
March 31, 2016, 10:04:30 PM |
|
just found two new openwrt antminer s3 bin on openwrt download page , and of course they won't flash because bitmain locked the bin so it won't but that's not a issue just use telnet to flash it . and i know i may brick the controller .that said wtf why not . https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/openwrt-ar71xx-generic-antminer-s3-squashfs-factory openwrt-ar71xx-generic-antminer-s3-squashfs-sysupgrade I flashed a locked TLink router about a month ago and did it from there normal locked firmware to open wrt then messed the router up tying other stuff but the flash worked i had my A4 mining on it for a while till i got brave wanted to try some thing else. Um yeah I dunno if I'd do that. You are probably going to have to cross compile bfgminer for openwrt with the bitmain driver enabled. There is a really good how to on the openwrt site. The git for bfgminer has a special makefile for openwrt. You can also try to use the repo on the front page. Even tho it's not for barier breaker it might work.
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
March 31, 2016, 11:32:06 PM Last edit: March 31, 2016, 11:48:26 PM by toptek |
|
just found two new openwrt antminer s3 bin on openwrt download page , and of course they won't flash because bitmain locked the bin so it won't but that's not a issue just use telnet to flash it . and i know i may brick the controller .that said wtf why not . https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/openwrt-ar71xx-generic-antminer-s3-squashfs-factory openwrt-ar71xx-generic-antminer-s3-squashfs-sysupgrade I flashed a locked TLink router about a month ago and did it from there normal locked firmware to open wrt then messed the router up tying other stuff but the flash worked i had my A4 mining on it for a while till i got brave wanted to try some thing else. Um yeah I dunno if I'd do that. You are probably going to have to cross compile bfgminer for openwrt with the bitmain driver enabled. There is a really good how to on the openwrt site. The git for bfgminer has a special makefile for openwrt. You can also try to use the repo on the front page. Even tho it's not for barier breaker it might work. ' a while back unless he never did it it was suppose to be enabled . and why not just wondering i trust your thoughts on why you know that or i wouldn't ask ".I know it will polly brick it but i have one of the custom made s3 controller not the one that comes with the upgrade kit or ant 3 in a box .; also found this Bitmain Antminer S3 Support @ trunk r46236 mines @ 38 something . Bitmain Antminer S3 Cryptocurrency Miner Hash rate: 440 GH/s @ about 340 Watts OEM Web Page https://www.bitmaintech.comHardware Architecture MIPS32 Vendor Bitmain Bootloader U-Boot System-On-Chip Atheros AR9331 CPU @Freq MIPS 24Kc @400MHz Flash size 8 MiB RAM 64 MiB Wireless Integrated Atheros 802.11b/g/n Photos and this bfg pack should work: bfgminer_5.4.2-1_ar71xx.ipk no other pack will load or let me.i have yet to take the time and learn cross compiling. i know that's my whole issue im sure and I should . and this guide https://wiki.openwrt.org/doc/howto/bitcoinmining i really can't find much more
|
|
|
|
LPape
Member
Offline
Activity: 84
Merit: 10
|
|
March 31, 2016, 11:51:47 PM |
|
just found two new openwrt antminer s3 bin on openwrt download page , and of course they won't flash because bitmain locked the bin so it won't but that's not a issue just use telnet to flash it . and i know i may brick the controller .that said wtf why not . https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/openwrt-ar71xx-generic-antminer-s3-squashfs-factory openwrt-ar71xx-generic-antminer-s3-squashfs-sysupgrade I flashed a locked TLink router about a month ago and did it from there normal locked firmware to open wrt then messed the router up tying other stuff but the flash worked i had my A4 mining on it for a while till i got brave wanted to try some thing else. Um yeah I dunno if I'd do that. You are probably going to have to cross compile bfgminer for openwrt with the bitmain driver enabled. There is a really good how to on the openwrt site. The git for bfgminer has a special makefile for openwrt. You can also try to use the repo on the front page. Even tho it's not for barier breaker it might work. ' a while back unless he never did it it was suppose to be enabled . and why not just wondering i trust your thoughts on why you know that or i wouldn't ask ".I know it will polly brick it but i have one of the custom made s3 controller not the one that comes with the upgrade kit or ant 3 in a box .; also found this Bitmain Antminer S3 Support @ trunk r46236 mines @ 38 something . Bitmain Antminer S3 Cryptocurrency Miner Hash rate: 440 GH/s @ about 340 Watts OEM Web Page https://www.bitmaintech.comHardware Architecture MIPS32 Vendor Bitmain Bootloader U-Boot System-On-Chip Atheros AR9331 CPU @Freq MIPS 24Kc @400MHz Flash size 8 MiB RAM 64 MiB Wireless Integrated Atheros 802.11b/g/n Photos and this bfg pack should work: bfgminer_5.4.2-1_ar71xx.ipk no other pack will load or let me.i have yet to take the time and learn cross compiling. i know that's my whole issue im sure and I should . and this guide https://wiki.openwrt.org/doc/howto/bitcoinmining i really can't find much more if you know how to use teamviewer I will let you try to connect it. http://www.teamviewer.com/en/ my skype name is Larry Pantlin black and white photo add me and I will pay 50$ in bitcoin to who ever can get this going for me.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
April 01, 2016, 12:04:06 AM |
|
just found two new openwrt antminer s3 bin on openwrt download page , and of course they won't flash because bitmain locked the bin so it won't but that's not a issue just use telnet to flash it . and i know i may brick the controller .that said wtf why not . https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/openwrt-ar71xx-generic-antminer-s3-squashfs-factory openwrt-ar71xx-generic-antminer-s3-squashfs-sysupgrade I flashed a locked TLink router about a month ago and did it from there normal locked firmware to open wrt then messed the router up tying other stuff but the flash worked i had my A4 mining on it for a while till i got brave wanted to try some thing else. Um yeah I dunno if I'd do that. You are probably going to have to cross compile bfgminer for openwrt with the bitmain driver enabled. There is a really good how to on the openwrt site. The git for bfgminer has a special makefile for openwrt. You can also try to use the repo on the front page. Even tho it's not for barier breaker it might work. ' a while back unless he never did it it was suppose to be enabled . and why not just wondering i trust your thoughts on why you know that or i wouldn't ask ".I know it will polly brick it but i have one of the custom made s3 controller not the one that comes with the upgrade kit or ant 3 in a box .; also found this Bitmain Antminer S3 Support @ trunk r46236 mines @ 38 something . Bitmain Antminer S3 Cryptocurrency Miner Hash rate: 440 GH/s @ about 340 Watts OEM Web Page https://www.bitmaintech.comHardware Architecture MIPS32 Vendor Bitmain Bootloader U-Boot System-On-Chip Atheros AR9331 CPU @Freq MIPS 24Kc @400MHz Flash size 8 MiB RAM 64 MiB Wireless Integrated Atheros 802.11b/g/n Photos and this bfg pack should work: bfgminer_5.4.2-1_ar71xx.ipk no other pack will load or let me.i have yet to take the time and learn cross compiling. i know that's my whole issue im sure and I should . and this guide https://wiki.openwrt.org/doc/howto/bitcoinmining i really can't find much more if you know how to use teamviewer I will let you try to connect it. http://www.teamviewer.com/en/ my skype name is Larry Pantlin black and white photo add me and I will pay 50$ in bitcoin to who ever can get this going for me. Does the miner mine with cgminer?
|
|
|
|
|
|