OregonMines.com
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 110
Merit: 10
OregonMines Official Account
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2015, 07:34:14 PM |
|
Why are these so expensive?
There is only one competitor on the market currently. I think the prices are right in line to be honest... it would always be nice to get them cheaper but I don't think there are any market forces that would push the mfg to get the price down at this point. So, less hashrate, less efficiency, need to provide your own controller, AND more expensive than the other competitor? Who's lining up to buy these? Bitmain has a 1 month lead time for the next batch of S7's, which is now rated at 4.05TH/s
|
OregonMines - Co-located Hosting of Bitcoin and GPU miners. https://www.oregonmines.com - S9 @ $100 / mo, L3+ @ $70 / mo , 4U GPU units start @ $100 / mo in co-location fees. No setup fees. Limited space available today!
|
|
|
kilo17
Legendary
Offline
Activity: 980
Merit: 1001
aka "whocares"
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2015, 07:39:13 PM |
|
Why are these so expensive?
There is only one competitor on the market currently. I think the prices are right in line to be honest... it would always be nice to get them cheaper but I don't think there are any market forces that would push the mfg to get the price down at this point. So, less hashrate, less efficiency, need to provide your own controller, AND more expensive than the other competitor? Who's lining up to buy these? I sold all my S7's and I am going with the Avalon 6 for a variety of reasons. 1 - USA distributer and warranty 2 - Try to buy an S7 - right now they have the batch 7 that are 4 Th and cost $1658 and is probably $1750 all said and done. 3 - S7 - $437.50/Th and the Avalon6 is $410/Th 4- Easily under clocked which means longer life. I think your facts are wrong. Oh yeah- 1 RasPi can control up to 40 Avalon6
|
Bitcoin Will Only Succeed If The Community That Supports It Gets Support - Support Home Miners & Mining
|
|
|
philipma1957
Legendary
Online
Activity: 4214
Merit: 8355
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2015, 07:42:12 PM |
|
Why are these so expensive?
There is only one competitor on the market currently. I think the prices are right in line to be honest... it would always be nice to get them cheaper but I don't think there are any market forces that would push the mfg to get the price down at this point. So, less hashrate, less efficiency, need to provide your own controller, AND more expensive than the other competitor? Who's lining up to buy these? The rasp pi is an advantage not a disadvantage. An s-7 controller dies and 4.8th lost. A rasp pi dies and your spare pi with your spare sd card is put in. down time under ½ hour your rasp pi run 5 of these easy using 1 ethernet wire. _______________________________________________________ _______________________________________________________ The key to this gear is does it under volt and down clock. If it does it has staying power. I talked with kilo17 today he may be able to get these next week. It would be an order not a pre order. He seems legit I liked him. I will post more later. I would get one Maybe Valkir We will post reviews and details if all works well. I really want to see if it handles low volts. This psu https://www.trcelectronics.com/ecomm/pdf/rsp1500.pdfhttp://www.trcelectronics.com/View/Mean-Well/RSP-1500-12.shtmlthis psu http://www.trcelectronics.com/View/Mean-Well/HRP-600-12.shtmlhttps://www.trcelectronics.com/ecomm/pdf/hrp600.pdfboth on hand for undervolt tests
|
|
|
|
kilo17
Legendary
Offline
Activity: 980
Merit: 1001
aka "whocares"
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2015, 07:46:15 PM |
|
I had a great conversation with Philipma1957. Super nice guy with a ton of knowledge. I am going to sell a few of my first batch upon arrival here. I expect them to arrive late next week.
|
Bitcoin Will Only Succeed If The Community That Supports It Gets Support - Support Home Miners & Mining
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2015, 07:50:47 PM |
|
Why are these so expensive?
There is only one competitor on the market currently. I think the prices are right in line to be honest... it would always be nice to get them cheaper but I don't think there are any market forces that would push the mfg to get the price down at this point. So, less hashrate, less efficiency, need to provide your own controller, AND more expensive than the other competitor? Who's lining up to buy these? I wouldn't count the cost of the Pi in there. It can be resold and should be suitable for all current and future Avalon miners you stock. Like a PSU, its not consumed or proprietary, unlike an SP20 or S7 control board.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4214
Merit: 8355
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2015, 09:34:34 PM |
|
Why are these so expensive?
There is only one competitor on the market currently. I think the prices are right in line to be honest... it would always be nice to get them cheaper but I don't think there are any market forces that would push the mfg to get the price down at this point. So, less hashrate, less efficiency, need to provide your own controller, AND more expensive than the other competitor? Who's lining up to buy these? I wouldn't count the cost of the Pi in there. It can be resold and should be suitable for all current and future Avalon miners you stock. Like a PSU, its not consumed or proprietary, unlike an SP20 or S7 control board. thats a good point dogie thanks for bringing it up. oh a few have asked about that 1500 watt psu. this one goes from 10 to 13.5 volts 87% efficient https://www.trcelectronics.com/ecomm/pdf/rsp1500.pdfI have been using it here and there. A guy on ebay was selling them at a good price http://www.ebay.com/itm/MeanWell-Power-Supply-Rsp-1500-12-/191732204742?I got one on ebay for a good price.
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2015, 09:40:20 PM |
|
Why are these so expensive?
There is only one competitor on the market currently. I think the prices are right in line to be honest... it would always be nice to get them cheaper but I don't think there are any market forces that would push the mfg to get the price down at this point. So, less hashrate, less efficiency, need to provide your own controller, AND more expensive than the other competitor? Who's lining up to buy these? I wouldn't count the cost of the Pi in there. It can be resold and should be suitable for all current and future Avalon miners you stock. Like a PSU, its not consumed or proprietary, unlike an SP20 or S7 control board. Also being able to go to a computer store or amazon one and have it next day or 2-3 days even is a huge bonus. A lot use custom controllers and its a huge pain to get a replacement quick, and you have down gear waiting on a cheap part. With the RPI you can replace it very easy. And easy to back up the image which is great aswell.
|
|
|
|
rockyforever
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2015, 09:57:57 PM |
|
Why are these so expensive?
There is only one competitor on the market currently. I think the prices are right in line to be honest... it would always be nice to get them cheaper but I don't think there are any market forces that would push the mfg to get the price down at this point. So, less hashrate, less efficiency, need to provide your own controller, AND more expensive than the other competitor? Who's lining up to buy these? I wouldn't count the cost of the Pi in there. It can be resold and should be suitable for all current and future Avalon miners you stock. Like a PSU, its not consumed or proprietary, unlike an SP20 or S7 control board. thats a good point dogie thanks for bringing it up. oh a few have asked about that 1500 watt psu. this one goes from 10 to 13.5 volts 87% efficient https://www.trcelectronics.com/ecomm/pdf/rsp1500.pdfI have been using it here and there. A guy on ebay was selling them at a good price http://www.ebay.com/itm/MeanWell-Power-Supply-Rsp-1500-12-/191732204742?I got one on ebay for a good price. So a PSU that can be adjusted is required to undervolt/underclock the avalon6?
|
|
|
|
philipma1957
Legendary
Online
Activity: 4214
Merit: 8355
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2015, 10:47:42 PM |
|
Why are these so expensive?
There is only one competitor on the market currently. I think the prices are right in line to be honest... it would always be nice to get them cheaper but I don't think there are any market forces that would push the mfg to get the price down at this point. So, less hashrate, less efficiency, need to provide your own controller, AND more expensive than the other competitor? Who's lining up to buy these? I wouldn't count the cost of the Pi in there. It can be resold and should be suitable for all current and future Avalon miners you stock. Like a PSU, its not consumed or proprietary, unlike an SP20 or S7 control board. thats a good point dogie thanks for bringing it up. oh a few have asked about that 1500 watt psu. this one goes from 10 to 13.5 volts 87% efficient https://www.trcelectronics.com/ecomm/pdf/rsp1500.pdfI have been using it here and there. A guy on ebay was selling them at a good price http://www.ebay.com/itm/MeanWell-Power-Supply-Rsp-1500-12-/191732204742?I got one on ebay for a good price. So a PSU that can be adjusted is required to undervolt/underclock the avalon6? underclock is software any psu allows underclock. but and we are not sure since testing has not been done under volting may be via a psu option not via software. if undervolting works and you under volt via psu there are a few . we are working on unknown as of now. Hopefully in 10 - 12 days when I get one I can answer it. If I work with kilo17 and help sell to the forum members on this site they will be in hand and not preorders. He is getting a big batch and I would help him distribute them. This would be no MOQ as he will order big enough batches to satisfy MOQ. Markup will be very low. More to cover shipping and handling then to buy a few hundred at 1500 and sell them at 2200.
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2015, 11:30:36 PM |
|
Why are these so expensive?
There is only one competitor on the market currently. I think the prices are right in line to be honest... it would always be nice to get them cheaper but I don't think there are any market forces that would push the mfg to get the price down at this point. So, less hashrate, less efficiency, need to provide your own controller, AND more expensive than the other competitor? Who's lining up to buy these? I wouldn't count the cost of the Pi in there. It can be resold and should be suitable for all current and future Avalon miners you stock. Like a PSU, its not consumed or proprietary, unlike an SP20 or S7 control board. thats a good point dogie thanks for bringing it up. oh a few have asked about that 1500 watt psu. this one goes from 10 to 13.5 volts 87% efficient https://www.trcelectronics.com/ecomm/pdf/rsp1500.pdfI have been using it here and there. A guy on ebay was selling them at a good price http://www.ebay.com/itm/MeanWell-Power-Supply-Rsp-1500-12-/191732204742?I got one on ebay for a good price. So a PSU that can be adjusted is required to undervolt/underclock the avalon6? underclock is software any psu allows underclock. but and we are not sure since testing has not been done under volting may be via a psu option not via software. if undervolting works and you under volt via psu there are a few . we are working on unknown as of now. Hopefully in 10 - 12 days when I get one I can answer it. If I work with kilo17 and help sell to the forum members on this site they will be in hand and not preorders. He is getting a big batch and I would help him distribute them. This would be no MOQ as he will order big enough batches to satisfy MOQ. Markup will be very low. More to cover shipping and handling then to buy a few hundred at 1500 and sell them at 2200. Did BlockC raise the price? - http://www.blockc.co/collections/blockc-co-shop/products/avalon-6-3-65-th-s-bitcoin-mining-server . I could have sworn they had less then that a week or two ago. So on resell is that 2200 number you mention look like what they are planned on being sold for through Kilo?
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2015, 12:24:57 AM |
|
I think the prices are right in line to be honest...
You think that the price, which is so high as to make it likely impossible to achieve RoI on these things at any electric cost greater than about 3 cents/KWH, is right in line? Dunno what you're smoking, but keep it away from me - it's making you halucinate. Original Blockc price was $1300, then they went to $1400, haven't bothered to look since then - it was way too expensive (worse so than any of the S7 varients) at $1300. I'm still in "wait and see what Lketc/BW.COM come up with for a price, and what the actual specs on their miner(s) end up being" mode, while Ocing my S5s and pushing my SP20 as hard as I can with the cooling weather to maximise income while Bitcoin prices stay high. I'm starting to think I might manage to RoI those miners ANd their PSes after all. 8-)
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
philipma1957
Legendary
Online
Activity: 4214
Merit: 8355
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2015, 12:32:18 AM |
|
Why are these so expensive?
There is only one competitor on the market currently. I think the prices are right in line to be honest... it would always be nice to get them cheaper but I don't think there are any market forces that would push the mfg to get the price down at this point. So, less hashrate, less efficiency, need to provide your own controller, AND more expensive than the other competitor? Who's lining up to buy these? I wouldn't count the cost of the Pi in there. It can be resold and should be suitable for all current and future Avalon miners you stock. Like a PSU, its not consumed or proprietary, unlike an SP20 or S7 control board. thats a good point dogie thanks for bringing it up. oh a few have asked about that 1500 watt psu. this one goes from 10 to 13.5 volts 87% efficient https://www.trcelectronics.com/ecomm/pdf/rsp1500.pdfI have been using it here and there. A guy on ebay was selling them at a good price http://www.ebay.com/itm/MeanWell-Power-Supply-Rsp-1500-12-/191732204742?I got one on ebay for a good price. So a PSU that can be adjusted is required to undervolt/underclock the avalon6? underclock is software any psu allows underclock. but and we are not sure since testing has not been done under volting may be via a psu option not via software. if undervolting works and you under volt via psu there are a few . we are working on unknown as of now. Hopefully in 10 - 12 days when I get one I can answer it. If I work with kilo17 and help sell to the forum members on this site they will be in hand and not preorders. He is getting a big batch and I would help him distribute them. This would be no MOQ as he will order big enough batches to satisfy MOQ. Markup will be very low. More to cover shipping and handling then to buy a few hundred at 1500 and sell them at 2200. Did BlockC raise the price? - http://www.blockc.co/collections/blockc-co-shop/products/avalon-6-3-65-th-s-bitcoin-mining-server . I could have sworn they had less then that a week or two ago. So on resell is that 2200 number you mention look like what they are planned on being sold for through Kilo? no to the resale at 2200 I said he is not buying a few hundred of them at 1500 looking to do a markup to 2200. He told me the markup would be for shipping and handling . So he won't be looking for 2200 to a USA based buyer. Now two weeks ago these opened at 1300 moq of 10. I would think that coins going ups so high has cause MOQ to stay at 10 but price to go to 1500. The new s-7 is 4 btc that is 1530 it won't ship for about 1 month. The ones kilo17 has purchased should arrive at his place in 10 days. So if I get one and test it in 12 -14 days and it is good the rest that he want to sell would ship in under 18 days so maybe a 2 week head start on the s-7 batch 6. We all know asic shipping is slow. Kilo17 has told me he did a purchase it is paid for so no funds are needed at this moment. I think kilo17 wants to sell off 4-6 of his shipment. we all know the game so if they come on time he sends 2 to me I send 1 to valkir. we hope they work as promised. I test and demo as does valkir. we move a few more out for a total of 4 to 6. If it all works well first time kilo17 wants to do a new buy and we do it a second time say 20 to him 6 to 10 for others. First 2 are here: 1)philipma1957 2)valkir put in a name no obligation or coins for now. 3) 4) 5) 6) more numbers if needed.
|
|
|
|
wlefever
Legendary
Offline
Activity: 1174
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2015, 12:34:07 AM |
|
@philipma1957 you can tentatively put me down for 1 A6.
|
|
|
|
-droid-
Legendary
Offline
Activity: 1050
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2015, 12:38:58 AM |
|
@philipma1957 you can tentatively put me down for 1 A6.
First 2 are here: 1)philipma1957 2)valkir put in a name no obligation or coins for now. 3)wlefever 4)-droid- (1 for sure, maybe 2 or 3) 5) 6)
|
|
|
|
philipma1957
Legendary
Online
Activity: 4214
Merit: 8355
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2015, 12:44:34 AM |
|
@philipma1957 you can tentatively put me down for 1 A6.
First 2 are here: 1)philipma1957 2)valkir put in a name no obligation or coins for now. 3)wlefever 4)-droid- (1 for sure, maybe 2 or 3)-------first batch will be 1 5) 6)
|
|
|
|
wobbzz
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2015, 02:18:15 AM |
|
I'm interested in one.
|
z2z me @ zs18642322h0h7hzjknejehavx0srwmungl8uj0t3vsxd7jwzr2kdhrcj38setn7ujd500fqn99y52
|
|
|
philipma1957
Legendary
Online
Activity: 4214
Merit: 8355
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2015, 02:28:34 AM |
|
Kilo17's First shipment is due late next week. cutoff is 5 or 6 that he is willing to resell. no coins for now just interested go on the list. only 1 machine on first buy. First 2 are here: 1)philipma1957 2)valkir put in a name no obligation or coins for now. 3)wlefever 4)-droid- 5)wobbzz 6) these will be second buy 7) ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) 9) 10) go on the list as some may drop out.
|
|
|
|
jdot007
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 73
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2015, 02:56:05 AM |
|
philipma1957,
Please put me down for one as well.
Thanks
J
|
|
|
|
bigredbutton
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2015, 03:18:51 AM |
|
Put me down for one as well philipma1957 my good sir. Thanks
|
|
|
|
Kapz786
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2015, 03:37:08 AM |
|
I am keen for one unit but would require shipping to Australia
|
|
|
|
|