Bitcoin Forum
November 19, 2017, 01:29:55 AM *
News: Latest stable version of Bitcoin Core: 0.15.1  [Torrent].
 
   Home   Help Search Donate Login Register  
Pages: « 1 ... 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 [208] 209 210 211 212 213 214 215 216 217 218 219 220 221 »
  Print  
Author Topic: Avalon ASIC users thread  (Read 432301 times)
silversurfer1958
Full Member
***
Offline Offline

Activity: 234


View Profile WWW
June 14, 2014, 12:39:14 AM
 #4141

I should point point out that I've used Leaserig for about 4 days now and the rigs runs fine, fairly easy to set up, even for a noob like me. Prices are reasonable, about 0.0025BTC/MH/Day.
Which is really about £1 per day or less, I cant really complain about borrowing someone's Rig for £1 per day.
But the numbers are not profitable, that's not their fault, they are only leasing out rigs.
Many pools seem to advertise their profit at greater than that figure but I'm slowly running our of funds so
either the figures re inflated, or hand picked or, very possibly I've not chosen the right Pool but anyway,  anyone wanting to experiment with mining could try leaser rig,  (Just don't mention the Bilderberg group )

My thinking is that, OK, so I now know how to hire a rig and I now know how to set up pools, but that's obviously not all there is to making money in cryptos, after you've mined the coins, you need the extra step, trading them profitably to recoup you leasing fees,
that's obviously the tricky bit.

I'm still toying with the idea that I should buy my own equipment, but it really is a dilemma because using Leaserig or other, I don't have to leave my PC on, have to worry about maintenance.
on the other hand, if I buy the equipment, I make $300/yr/Mh  BUT I need a machine on 24/7.
There's not much in it either way really.

Been looking at these guys, they have a nice little 1.3 MH unit for about $100 and I hear they will host it free, only problem is,  it's pre order at the time of writing   ( 13th Jun 2014 which is Alex's Birthday, Happy Birthday M8).   
Tempting though.
Anybody dealt with this company or bought one of these units.

http://www.zighash.com/

Coinlancer is Disrupting the Freelance marketplace!
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1511054995
Hero Member
*
Offline Offline

Posts: 1511054995

View Profile Personal Message (Offline)

Ignore
1511054995
Reply with quote  #2

1511054995
Report to moderator
1511054995
Hero Member
*
Offline Offline

Posts: 1511054995

View Profile Personal Message (Offline)

Ignore
1511054995
Reply with quote  #2

1511054995
Report to moderator
panda86
Jr. Member
*
Offline Offline

Activity: 56


View Profile
June 15, 2014, 11:33:41 AM
 #4142

Hello guys, my problem is next, I have had a firmware 20131110 and my avalon gen2 stops hashing few times a day. I try with system update but any firmware from 2014 just wont work. It won't start to hash. Every time I got message Connection refused in cgminer. When I return it to the older firmware all work but very unstable. At this moment i have HW about 50% which is too much (or its not???). I mine on btcguild, ghash and one multipool by failover. Can you help me? What I do wrong with system update? Every time keep settings were checked. Do I need to decheck this option while I upgrade firmware? My Avalon is on wr703n, and i run it on 1300MHz.

Leetpro
Newbie
*
Offline Offline

Activity: 18


View Profile
June 17, 2014, 07:51:56 PM
 #4143

I just received an Avalon 3 290 module, along with a TP-link controller/interface from eHash.com yesterday. I hooked it up to my laptop with the Ethernet cable and was able to access and configure settings through the web interface. I changed the address to my network, moved it, and can still login and connect to it.
What I CAN'T do is talk to the miner, or get it to do anything. I'm using a Thermaltake TR2-600 w power supply.
I see 2 green LED's on the interface board, and the fan runs. That's all.
The CGMiner API log says firmware 20140423, CGMiner 2077365. Socket connection failed: Connection refused.

Can anyone tell me what I am doing wrong, if anything?

Please help. Thanks.

Im having the exact same issue
please help!
boldy
Newbie
*
Offline Offline

Activity: 1


View Profile
June 21, 2014, 06:58:55 PM
 #4144

I bought a 200gh unit and after roughly 24 hours of mining I noticed the rig turned itself on and off, then the hash rate bounces from 84-96mh but never any higher.
Temperature reads below the parameters set by Vision Man. All settings are at what they recommend. I turned the unit off, let it sit for about an hour, turned it back on, and it still has the same issue.
I reset to defaults, got everything reconfigured in terms of Chip Frequency, Miner Count, etc. It still has the exact same issue!
The unit is hard wired with wireless disabled.
Any help would be greatly appreciated, and thank you for your time.

Miner Count: 16
Asic Count: 10
Frequency: 1300
Fan1: 2760
Fan2: 0
Fan3: 0
Temp1: -1
Temp2: 52
Temp3: -1
DH(%) 1.2526
NMW: 237
Firmware: 20131110
Controller: 2013110865
unfold
Newbie
*
Offline Offline

Activity: 1


View Profile
June 22, 2014, 05:30:27 PM
 #4145

Hello,

I cant seem to get my avalon 3 with avalon 2 module working connected to a raspberry pi. I get this specific error

[Firmware Version] => 20140526
cgminer: 444d457
cgminer-openwrt-packages: b7b7afe
luci: b66161d
Socket connect failed: Connection refused

I read this was most likely a network configuration error. I checked all my settings and everything is fine. I ran the ping and as you can see the results are ok.

PING google.com (167.206.145.182): 56 data bytes
64 bytes from 167.206.145.182: seq=0 ttl=59 time=12.840 ms
64 bytes from 167.206.145.182: seq=1 ttl=59 time=9.882 ms
64 bytes from 167.206.145.182: seq=2 ttl=59 time=9.847 ms
64 bytes from 167.206.145.182: seq=3 ttl=59 time=8.489 ms
64 bytes from 167.206.145.182: seq=4 ttl=59 time=8.332 ms

--- google.com ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 8.332/9.878/12.840 ms

I also factory reset the units a couple of times just to be sure, and to my surprise still the same error.

I also thought it might be a powersupply problem. I put 2 powersupplies from one of my antminer s2 setups, and still the same problem. I also bought a new psu. Still the same issue (Thinking it may a module powering issue), but fans are spinning and power leds are up.

The Avalon 3 to avalon 2 module is connected to a usb hub that has a seperate psu and is the sold on ehash. I also tried to connect it directly to the Raspberry pi.

Definitely need help on this one.


Dizzee
Jr. Member
*
Offline Offline

Activity: 36


View Profile
June 22, 2014, 10:48:21 PM
 #4146

I have 3 Avalon3 Single modules.. just sitting on a table.
I have a Raspberry PI I have installed the latest firmware to SD card
and thats it they sit there and do nothing..
expensive metal bricks
Icy
Newbie
*
Offline Offline

Activity: 14


View Profile
June 23, 2014, 03:35:27 AM
 #4147

My Avalon3 is hashing away just fine. (needed to raise the voltage some to reduce the error rate to under .5%).
I compiled Cgminer from source with --enable-avalon2 flag.
Then added -S /dev/ttyUSB0 --avalon2-voltage 7250 --avalon2-freq 500 in addition to my normal configuration to the command line.

If you are feeling adventurous the avalon-usb branch of cgminer in BitSyncom's git has some nice updates.
vlad-md
Newbie
*
Offline Offline

Activity: 2


View Profile
June 23, 2014, 02:52:06 PM
 #4148

Hey. Anyone knows why my speed is lower than should be? It is avalon3. http://i57.tinypic.com/apbmg4.jpg
Dizzee
Jr. Member
*
Offline Offline

Activity: 36


View Profile
June 23, 2014, 11:07:40 PM
 #4149

ok, I have finally got my avalon3 single modules doing something... I have accessed r'pi using the authorised firmware, changed settings to DHCP (if you have trouble access this you might need to change the ip range on your router to 192.168.0.xxx log in change to DHCP then you can reset settings on router)..
Once the r'pi kicks in the Avalon3's noticably speed up but there does not seem to be any significant heat generated? (happy but confused)
in the summery all work is Discarded.
I am not seeing any active worker in the pool (mupool).
is there a tutorial/guide to what I am seeing in this OpenWrt Barrier Breaker control panel thang?
Thanks
Dizzee
Jr. Member
*
Offline Offline

Activity: 36


View Profile
June 24, 2014, 05:37:23 PM
 #4150

So a dev from mupool.com (he/she was so cool, recommended) attempteed to start my ASIC and failed, apparently cgminer see's my avalon3's but can't access the ASIC.. and suggestions please?
Posted from Bitcointa.lk - #KV5rH1oq0W9o3h9E
kevsteelio
Newbie
*
Offline Offline

Activity: 4


View Profile
June 25, 2014, 05:01:24 AM
 #4151

Warning:  New guy!

I picked up a 200 GHs Avalon that was running fine.  I've been working with it fine for a few months and I finally decided to upgrade the firmware.  Used the openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory-20140201 firmware package.

Since then it has been a nightmare.  CGMiner no longer makes any connection to my pools.  when looking in the CGMiner logs I see the following:

[Firmware Version] => 20140201
cgminer: 698d677
cgminer-openwrt-packages: 7a823a7
luci: 4544a03
Socket connect failed: Connection refused


The CGMiner page looks like the image here http://ftp://ftp.storagecraft.com/ava200ghs.png

I've dug through a bunch of posts across many areas.  your help and suggestions would be very welcome.
Dizzee
Jr. Member
*
Offline Offline

Activity: 36


View Profile
June 25, 2014, 05:39:04 AM
 #4152

Warning:  New guy!

I picked up a 200 GHs Avalon that was running fine.  I've been working with it fine for a few months and I finally decided to upgrade the firmware.  Used the openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory-20140201 firmware package.

Since then it has been a nightmare.  CGMiner no longer makes any connection to my pools.  when looking in the CGMiner logs I see the following:

[Firmware Version] => 20140201
cgminer: 698d677
cgminer-openwrt-packages: 7a823a7
luci: 4544a03
Socket connect failed: Connection refused


The CGMiner page looks like the image here ftp://ftp.storagecraft.com/ava200ghs.png

I've dug through a bunch of posts across many areas.  your help and suggestions would be very welcome.
try going here
http://downloads.canaan-creative.com/software/avalon2/latest/tl-wr703n-v1/20140526/
Posted from Bitcointa.lk - #5VdpO7W7cSpXTyNO
kevsteelio
Newbie
*
Offline Offline

Activity: 4


View Profile
June 25, 2014, 01:36:22 PM
 #4153

try going here
http://downloads.canaan-creative.com/software/avalon2/latest/tl-wr703n-v1/20140526/
Posted from Bitcointa.lk - #5VdpO7W7cSpXTyNO

Thanks, I've applied that one with the same behavior, I Rolled back just in case it had compatibility concerns.  This just came from a few posts I was researching. 

One person thought they fixed it due to a problem communicating over 123 but I believe I have that open.  And I didn't need that earlier if that was the case because it was working, I ran the firmware update and it stopped working.

Kevsteelio
kevsteelio
Newbie
*
Offline Offline

Activity: 4


View Profile
June 26, 2014, 04:07:58 AM
 #4154

Updated to the factory version of 20140526

Still same behavior with Updated code  Embarrassed

CGMiner API Log
[Firmware Version] => 20140526
cgminer: 444d457
cgminer-openwrt-packages: b7b7afe
luci: b66161d
Socket connect failed: Connection refused

CGMiner settings sans/personal info:
Pool1: stratum+tcp://stratum.btcguild.com:3333
Pool Balance(Default: Failover): Balance
Chip Frequency(Avalon2: 1500, Avalon3: 450): 1300
Chip Voltage(Avalon2: 10000, Avalon3: 6625): 10000
Fan%(Default: 90%): 90
API Allow(Default: W:127.0.0.1):  W:127.0.0.1
More Options(Default: --quiet): --real-quiet

Latest System_Log:
Wed Jun 25 21:56:48 2014 kern.debug kernel: [   11.560000] ath: EEPROM regdomain: 0x0
Wed Jun 25 21:56:48 2014 kern.debug kernel: [   11.560000] ath: EEPROM indicates default country code should be used
Wed Jun 25 21:56:48 2014 kern.debug kernel: [   11.560000] ath: doing EEPROM country->regdmn map search
Wed Jun 25 21:56:48 2014 kern.debug kernel: [   11.560000] ath: country maps to regdmn code: 0x3a
Wed Jun 25 21:56:48 2014 kern.debug kernel: [   11.560000] ath: Country alpha2 being used: US
Wed Jun 25 21:56:48 2014 kern.debug kernel: [   11.560000] ath: Regpair used: 0x3a
Wed Jun 25 21:56:48 2014 kern.debug kernel: [   11.570000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Wed Jun 25 21:56:48 2014 kern.info kernel: [   11.580000] cfg80211: Calling CRDA for country: US
Wed Jun 25 21:56:48 2014 kern.info kernel: [   11.580000] cfg80211: Regulatory domain changed to country: US
Wed Jun 25 21:56:48 2014 kern.info kernel: [   11.590000] cfg80211:  DFS Master region: FCC
Wed Jun 25 21:56:48 2014 kern.info kernel: [   11.590000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Wed Jun 25 21:56:48 2014 kern.info kernel: [   11.600000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Wed Jun 25 21:56:48 2014 kern.info kernel: [   11.610000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Wed Jun 25 21:56:48 2014 kern.info kernel: [   11.620000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
Wed Jun 25 21:56:48 2014 kern.info kernel: [   11.630000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Wed Jun 25 21:56:48 2014 kern.info kernel: [   11.630000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Wed Jun 25 21:56:48 2014 kern.info kernel: [   11.640000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Wed Jun 25 21:56:48 2014 user.emerg syslog: Error: Failed to connect to ubus
Wed Jun 25 21:56:50 2014 user.emerg syslog: uinteger - 8 = true
Wed Jun 25 21:56:50 2014 daemon.err odhcpd[659]: Failed to open routing table: No such file or directory
Wed Jun 25 21:56:50 2014 daemon.err odhcpd[659]: Unable to open raw socket: Address family not supported by protocol
Wed Jun 25 21:56:51 2014 cron.info crond[680]: crond: crond (busybox 1.22.1) started, log level 8
Wed Jun 25 21:56:51 2014 authpriv.info dropbear[695]: Not backgrounding
Wed Jun 25 21:56:54 2014 daemon.notice netifd: Interface 'lan' is enabled
Wed Jun 25 21:56:54 2014 daemon.notice netifd: Interface 'loopback' is enabled
Wed Jun 25 21:56:54 2014 daemon.notice netifd: Network device 'lo' link is up
Wed Jun 25 21:56:54 2014 kern.info kernel: [   19.980000] device eth0 entered promiscuous mode
Wed Jun 25 21:56:54 2014 daemon.notice netifd: Interface 'loopback' has link connectivity
Wed Jun 25 21:56:54 2014 daemon.notice netifd: Interface 'loopback' is setting up now
Wed Jun 25 21:56:54 2014 daemon.notice netifd: Interface 'loopback' is now up
Wed Jun 25 21:56:54 2014 user.emerg syslog: ntpd: bad address '4.openwrt.pool.ntp.org'
Wed Jun 25 21:56:54 2014 user.emerg syslog: ntpd: could not resolve peer 4.openwrt.pool.ntp.org, skipping
Wed Jun 25 21:56:54 2014 user.emerg syslog: ntpd: bad address '3.openwrt.pool.ntp.org'
Wed Jun 25 21:56:54 2014 user.emerg syslog: ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
Wed Jun 25 21:56:54 2014 user.emerg syslog: ntpd: bad address '1.openwrt.pool.ntp.org'
Wed Jun 25 21:56:54 2014 user.emerg syslog: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Wed Jun 25 21:56:54 2014 user.emerg syslog: ntpd: bad address '0.openwrt.pool.ntp.org'
Wed Jun 25 21:56:54 2014 user.emerg syslog: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Wed Jun 25 21:56:54 2014 kern.info kernel: [   20.470000] eth0: link up (100Mbps/Full duplex)
Wed Jun 25 21:56:54 2014 kern.info kernel: [   20.470000] br-lan: port 1(eth0) entered forwarding state
Wed Jun 25 21:56:54 2014 kern.info kernel: [   20.480000] br-lan: port 1(eth0) entered forwarding state
Wed Jun 25 21:56:54 2014 daemon.notice netifd: Network device 'eth0' link is up
Wed Jun 25 21:56:54 2014 daemon.notice netifd: Bridge 'br-lan' link is up
Wed Jun 25 21:56:54 2014 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Jun 25 21:56:54 2014 daemon.notice netifd: Interface 'lan' is setting up now
Wed Jun 25 21:56:54 2014 daemon.notice netifd: Interface 'lan' is now up
Wed Jun 25 21:56:55 2014 user.emerg syslog: 'radio0' is disabled
Wed Jun 25 21:56:55 2014 user.emerg syslog: 'radio0' is disabled
Wed Jun 25 21:56:55 2014 daemon.info dnsmasq[828]: started, version 2.71 cachesize 150
Wed Jun 25 21:56:55 2014 daemon.info dnsmasq[828]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Wed Jun 25 21:56:55 2014 daemon.info dnsmasq[828]: using local addresses only for domain lan
Wed Jun 25 21:56:55 2014 daemon.info dnsmasq[828]: reading /tmp/resolv.conf.auto
Wed Jun 25 21:56:55 2014 daemon.info dnsmasq[828]: using local addresses only for domain lan
Wed Jun 25 21:56:55 2014 daemon.info dnsmasq[828]: using nameserver 192.168.0.1#53
Wed Jun 25 21:56:55 2014 daemon.info dnsmasq[828]: read /etc/hosts - 1 addresses
Wed Jun 25 21:56:55 2014 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Jun 25 21:56:55 2014 daemon.err odhcpd[867]: Failed to open routing table: No such file or directory
Wed Jun 25 21:56:55 2014 daemon.err odhcpd[867]: Unable to open raw socket: Address family not supported by protocol
Wed Jun 25 21:56:56 2014 kern.info kernel: [   22.480000] br-lan: port 1(eth0) entered forwarding state
Wed Jun 25 21:57:00 2014 daemon.err odhcpd[885]: Failed to open routing table: No such file or directory
Wed Jun 25 21:57:00 2014 daemon.err odhcpd[885]: Unable to open raw socket: Address family not supported by protocol
Wed Jun 25 21:57:20 2014 daemon.err odhcpd[890]: Failed to open routing table: No such file or directory
Wed Jun 25 21:57:20 2014 daemon.err odhcpd[890]: Unable to open raw socket: Address family not supported by protocol
Wed Jun 25 21:57:25 2014 daemon.err odhcpd[897]: Failed to open routing table: No such file or directory
Wed Jun 25 21:57:25 2014 daemon.err odhcpd[897]: Unable to open raw socket: Address family not supported by protocol
Wed Jun 25 21:57:30 2014 daemon.err odhcpd[922]: Failed to open routing table: No such file or directory
Wed Jun 25 21:57:30 2014 daemon.err odhcpd[922]: Unable to open raw socket: Address family not supported by protocol
Wed Jun 25 21:57:30 2014 user.emerg syslog: Instance odhcpd::instance1 s in a crash loop 6 crashes, 0 seconds since last crash
Wed Jun 25 21:57:44 2014 user.emerg syslog: ntpd: bad address '4.openwrt.pool.ntp.org'
Wed Jun 25 21:57:44 2014 user.emerg syslog: ntpd: could not resolve peer 4.openwrt.pool.ntp.org, skipping
Wed Jun 25 21:57:44 2014 user.emerg syslog: ntpd: resolved peer 3.openwrt.pool.ntp.org to 173.230.144.109
Wed Jun 25 21:57:44 2014 user.emerg syslog: ntpd: sending query to 173.230.144.109
Wed Jun 25 21:57:44 2014 user.emerg syslog: ntpd: resolved peer 1.openwrt.pool.ntp.org to 50.97.210.169
Wed Jun 25 21:57:44 2014 user.emerg syslog: ntpd: sending query to 50.97.210.169
Wed Jun 25 21:57:44 2014 user.emerg syslog: ntpd: resolved peer 0.openwrt.pool.ntp.org to 76.73.0.4
Wed Jun 25 21:57:44 2014 user.emerg syslog: ntpd: sending query to 76.73.0.4
Wed Jun 25 21:57:44 2014 user.emerg syslog: ntpd: reply from 173.230.144.109: offset:-0.171055 delay:0.440123 status:0x24 strat:3 refid:0xd0c9f202 rootdelay:0.004669 reach:0x01
Wed Jun 25 21:57:44 2014 user.emerg syslog: ntpd: reply from 50.97.210.169: offset:-0.062920 delay:0.213659 status:0x24 strat:2 refid:0xd133a1ee rootdelay:0.072099 reach:0x01
Wed Jun 25 21:57:44 2014 user.emerg syslog: Alarm clock
Wed Jun 25 21:58:14 2014 user.emerg syslog: ntpd: bad address '4.openwrt.pool.ntp.org'
Wed Jun 25 21:58:14 2014 user.emerg syslog: ntpd: could not resolve peer 4.openwrt.pool.ntp.org, skipping
Wed Jun 25 21:58:14 2014 user.emerg syslog: ntpd: resolved peer 3.openwrt.pool.ntp.org to 173.230.144.109
Wed Jun 25 21:58:14 2014 user.emerg syslog: ntpd: sending query to 173.230.144.109
Wed Jun 25 21:58:14 2014 user.emerg syslog: ntpd: resolved peer 1.openwrt.pool.ntp.org to 50.97.210.169
Wed Jun 25 21:58:14 2014 user.emerg syslog: ntpd: sending query to 50.97.210.169
Wed Jun 25 21:58:14 2014 user.emerg syslog: ntpd: resolved peer 0.openwrt.pool.ntp.org to 76.73.0.4
Wed Jun 25 21:58:14 2014 user.emerg syslog: ntpd: sending query to 76.73.0.4
Wed Jun 25 21:58:14 2014 user.emerg syslog: ntpd: reply from 173.230.144.109: offset:+0.019948 delay:0.057040 status:0x24 strat:3 refid:0xd0c9f202 rootdelay:0.004669 reach:0x01
Wed Jun 25 21:58:14 2014 user.emerg syslog: Alarm clock
Wed Jun 25 21:58:16 2014 cron.info crond[680]: crond: USER root pid 1168 cmd /usr/bin/cgminer-monitor
Wed Jun 25 21:58:44 2014 user.emerg syslog: ntpd: bad address '4.openwrt.pool.ntp.org'
Wed Jun 25 21:58:44 2014 user.emerg syslog: ntpd: could not resolve peer 4.openwrt.pool.ntp.org, skipping
Wed Jun 25 21:58:44 2014 user.emerg syslog: ntpd: resolved peer 3.openwrt.pool.ntp.org to 208.75.88.4
Wed Jun 25 21:58:44 2014 user.emerg syslog: ntpd: sending query to 208.75.88.4
Wed Jun 25 21:58:44 2014 user.emerg syslog: ntpd: resolved peer 1.openwrt.pool.ntp.org to 173.230.144.178
Wed Jun 25 21:58:44 2014 user.emerg syslog: ntpd: sending query to 173.230.144.178
Wed Jun 25 21:58:44 2014 user.emerg syslog: ntpd: resolved peer 0.openwrt.pool.ntp.org to 199.7.177.206
Wed Jun 25 21:58:44 2014 user.emerg syslog: ntpd: sending query to 199.7.177.206
Wed Jun 25 21:58:44 2014 user.emerg syslog: ntpd: reply from 208.75.88.4: offset:+0.010493 delay:0.053818 status:0x24 strat:2 refid:0x8009b01e rootdelay:0.002029 reach:0x01
Wed Jun 25 21:58:44 2014 user.emerg syslog: Alarm clock
Wed Jun 25 21:59:15 2014 user.emerg syslog: ntpd: bad address '4.openwrt.pool.ntp.org'
Wed Jun 25 21:59:15 2014 user.emerg syslog: ntpd: could not resolve peer 4.openwrt.pool.ntp.org, skipping
Wed Jun 25 21:59:15 2014 user.emerg syslog: ntpd: resolved peer 3.openwrt.pool.ntp.org to 173.230.144.109
Wed Jun 25 21:59:15 2014 user.emerg syslog: ntpd: sending query to 173.230.144.109
Wed Jun 25 21:59:15 2014 user.emerg syslog: ntpd: resolved peer 1.openwrt.pool.ntp.org to 108.61.73.244
Wed Jun 25 21:59:15 2014 user.emerg syslog: ntpd: sending query to 108.61.73.244
Wed Jun 25 21:59:15 2014 user.emerg syslog: ntpd: resolved peer 0.openwrt.pool.ntp.org to 69.41.163.31
Wed Jun 25 21:59:15 2014 user.emerg syslog: ntpd: sending query to 69.41.163.31
Wed Jun 25 21:59:15 2014 user.emerg syslog: ntpd: reply from 173.230.144.109: offset:-0.071335 delay:0.239691 status:0x24 strat:3 refid:0xd0c9f202 rootdelay:0.004669 reach:0x01
Wed Jun 25 21:59:15 2014 user.emerg syslog: Alarm clock
Wed Jun 25 21:59:45 2014 user.emerg syslog: ntpd: bad address '4.openwrt.pool.ntp.org'
Wed Jun 25 21:59:45 2014 user.emerg syslog: ntpd: could not resolve peer 4.openwrt.pool.ntp.org, skipping
Wed Jun 25 21:59:45 2014 user.emerg syslog: ntpd: resolved peer 3.openwrt.pool.ntp.org to 173.230.144.109
Wed Jun 25 21:59:45 2014 user.emerg syslog: ntpd: sending query to 173.230.144.109
Wed Jun 25 21:59:45 2014 user.emerg syslog: ntpd: resolved peer 1.openwrt.pool.ntp.org to 108.61.73.244
Wed Jun 25 21:59:45 2014 user.emerg syslog: ntpd: sending query to 108.61.73.244
Wed Jun 25 21:59:45 2014 user.emerg syslog: ntpd: resolved peer 0.openwrt.pool.ntp.org to 199.7.177.206
Wed Jun 25 21:59:45 2014 user.emerg syslog: ntpd: sending query to 199.7.177.206
Wed Jun 25 21:59:45 2014 user.emerg syslog: ntpd: reply from 173.230.144.109: offset:+0.019239 delay:0.057022 status:0x24 strat:3 refid:0xd0c9f202 rootdelay:0.004669 reach:0x01
Wed Jun 25 21:59:45 2014 user.emerg syslog: Alarm clock
Wed Jun 25 22:00:01 2014 cron.info crond[680]: crond: user root: process already running: /usr/bin/cgminer-monitor
Wed Jun 25 22:00:15 2014 user.emerg syslog: ntpd: bad address '4.openwrt.pool.ntp.org'
Wed Jun 25 22:00:15 2014 user.emerg syslog: ntpd: could not resolve peer 4.openwrt.pool.ntp.org, skipping
Wed Jun 25 22:00:15 2014 user.emerg syslog: ntpd: resolved peer 3.openwrt.pool.ntp.org to 208.75.89.4
Wed Jun 25 22:00:15 2014 user.emerg syslog: ntpd: sending query to 208.75.89.4
Wed Jun 25 22:00:15 2014 user.emerg syslog: ntpd: resolved peer 1.openwrt.pool.ntp.org to 64.246.132.14
Wed Jun 25 22:00:15 2014 user.emerg syslog: ntpd: sending query to 64.246.132.14
Wed Jun 25 22:00:15 2014 user.emerg syslog: ntpd: resolved peer 0.openwrt.pool.ntp.org to 69.41.163.31
Wed Jun 25 22:00:15 2014 user.emerg syslog: ntpd: sending query to 69.41.163.31
Wed Jun 25 22:00:15 2014 user.emerg syslog: ntpd: reply from 208.75.89.4: offset:+0.010801 delay:0.054664 status:0x24 strat:2 refid:0xce751914 rootdelay:0.004578 reach:0x01
Wed Jun 25 22:00:15 2014 user.emerg syslog: Alarm clock
Wed Jun 25 22:00:45 2014 user.emerg syslog: ntpd: bad address '4.openwrt.pool.ntp.org'
Wed Jun 25 22:00:45 2014 user.emerg syslog: ntpd: could not resolve peer 4.openwrt.pool.ntp.org, skipping
Wed Jun 25 22:00:45 2014 user.emerg syslog: ntpd: resolved peer 3.openwrt.pool.ntp.org to 173.230.144.109
Wed Jun 25 22:00:45 2014 user.emerg syslog: ntpd: sending query to 173.230.144.109
Wed Jun 25 22:00:45 2014 user.emerg syslog: ntpd: resolved peer 1.openwrt.pool.ntp.org to 108.61.73.244
Wed Jun 25 22:00:45 2014 user.emerg syslog: ntpd: sending query to 108.61.73.244
Wed Jun 25 22:00:45 2014 user.emerg syslog: ntpd: resolved peer 0.openwrt.pool.ntp.org to 199.7.177.206
Wed Jun 25 22:00:45 2014 user.emerg syslog: ntpd: sending query to 199.7.177.206
Wed Jun 25 22:00:45 2014 user.emerg syslog: ntpd: reply from 173.230.144.109: offset:+0.019156 delay:0.056624 status:0x24 strat:3 refid:0xd0c9f202 rootdelay:0.004669 reach:0x01
Wed Jun 25 22:00:45 2014 user.emerg syslog: Alarm clock
Wed Jun 25 22:01:15 2014 user.emerg syslog: ntpd: bad address '4.openwrt.pool.ntp.org'
Wed Jun 25 22:01:15 2014 user.emerg syslog: ntpd: could not resolve peer 4.openwrt.pool.ntp.org, skipping
Wed Jun 25 22:01:15 2014 user.emerg syslog: ntpd: resolved peer 3.openwrt.pool.ntp.org to 208.75.89.4
Wed Jun 25 22:01:15 2014 user.emerg syslog: ntpd: sending query to 208.75.89.4
Wed Jun 25 22:01:15 2014 user.emerg syslog: ntpd: resolved peer 1.openwrt.pool.ntp.org to 64.246.132.14
Wed Jun 25 22:01:15 2014 user.emerg syslog: ntpd: sending query to 64.246.132.14
Wed Jun 25 22:01:15 2014 user.emerg syslog: ntpd: resolved peer 0.openwrt.pool.ntp.org to 64.71.152.181
Wed Jun 25 22:01:15 2014 user.emerg syslog: ntpd: sending query to 64.71.152.181
Wed Jun 25 22:01:15 2014 user.emerg syslog: ntpd: reply from 208.75.89.4: offset:-0.018493 delay:0.104117 status:0x24 strat:2 refid:0xce751914 rootdelay:0.004578 reach:0x01
Wed Jun 25 22:01:15 2014 user.emerg syslog: ntpd: reply from 64.246.132.14: offset:-0.002182 delay:0.100866 status:0x24 strat:1 refid:0x43444d41 rootdelay:0.000000 reach:0x01
Wed Jun 25 22:01:15 2014 user.emerg syslog: Alarm clock
Wed Jun 25 22:01:45 2014 user.emerg syslog: ntpd: bad address '4.openwrt.pool.ntp.org'
Wed Jun 25 22:01:45 2014 user.emerg syslog: ntpd: could not resolve peer 4.openwrt.pool.ntp.org, skipping
Wed Jun 25 22:01:45 2014 user.emerg syslog: ntpd: resolved peer 3.openwrt.pool.ntp.org to 216.66.0.142
Wed Jun 25 22:01:45 2014 user.emerg syslog: ntpd: sending query to 216.66.0.142
Wed Jun 25 22:01:45 2014 user.emerg syslog: ntpd: resolved peer 1.openwrt.pool.ntp.org to 64.246.132.14
Wed Jun 25 22:01:45 2014 user.emerg syslog: ntpd: sending query to 64.246.132.14
Wed Jun 25 22:01:46 2014 user.emerg syslog: ntpd: resolved peer 0.openwrt.pool.ntp.org to 64.71.152.181
Wed Jun 25 22:01:46 2014 user.emerg syslog: ntpd: sending query to 64.71.152.181
Wed Jun 25 22:01:46 2014 user.emerg syslog: ntpd: reply from 216.66.0.142: offset:-0.037225 delay:0.176683 status:0x24 strat:2 refid:0xc862c4d4 rootdelay:0.018051 reach:0x01
Wed Jun 25 22:01:46 2014 user.emerg syslog: Alarm clock
Wed Jun 25 22:02:01 2014 cron.info crond[680]: crond: user root: process already running: /usr/bin/cgminer-monitor
Wed Jun 25 22:02:16 2014 user.emerg syslog: ntpd: bad address '4.openwrt.pool.ntp.org'
Wed Jun 25 22:02:16 2014 user.emerg syslog: ntpd: could not resolve peer 4.openwrt.pool.ntp.org, skipping
Wed Jun 25 22:02:16 2014 user.emerg syslog: ntpd: resolved peer 3.openwrt.pool.ntp.org to 67.18.187.111
Wed Jun 25 22:02:16 2014 user.emerg syslog: ntpd: sending query to 67.18.187.111
Wed Jun 25 22:02:16 2014 user.emerg syslog: ntpd: resolved peer 1.openwrt.pool.ntp.org to 198.58.100.198
Wed Jun 25 22:02:16 2014 user.emerg syslog: ntpd: sending query to 198.58.100.198
Wed Jun 25 22:02:16 2014 user.emerg syslog: ntpd: resolved peer 0.openwrt.pool.ntp.org to 69.129.251.133
Wed Jun 25 22:02:16 2014 user.emerg syslog: ntpd: sending query to 69.129.251.133
Wed Jun 25 22:02:16 2014 user.emerg syslog: ntpd: reply from 67.18.187.111: offset:-0.002477 delay:0.059648 status:0x24 strat:2 refid:0x1838b28c rootdelay:0.025895 reach:0x01
Wed Jun 25 22:02:16 2014 user.emerg syslog: Alarm clock
Wed Jun 25 22:02:46 2014 user.emerg syslog: ntpd: bad address '4.openwrt.pool.ntp.org'
Wed Jun 25 22:02:46 2014 user.emerg syslog: ntpd: could not resolve peer 4.openwrt.pool.ntp.org, skipping
Wed Jun 25 22:02:46 2014 user.emerg syslog: ntpd: resolved peer 3.openwrt.pool.ntp.org to 198.55.111.50
Wed Jun 25 22:02:46 2014 user.emerg syslog: ntpd: sending query to 198.55.111.50
Wed Jun 25 22:02:46 2014 user.emerg syslog: ntpd: resolved peer 1.openwrt.pool.ntp.org to 50.97.210.169
Wed Jun 25 22:02:46 2014 user.emerg syslog: ntpd: sending query to 50.97.210.169
Wed Jun 25 22:02:46 2014 user.emerg syslog: ntpd: resolved peer 0.openwrt.pool.ntp.org to 64.71.152.181
Wed Jun 25 22:02:46 2014 user.emerg syslog: ntpd: sending query to 64.71.152.181
Wed Jun 25 22:02:46 2014 user.emerg syslog: ntpd: reply from 198.55.111.50: offset:+0.006290 delay:0.053633 status:0x24 strat:3 refid:0xd8e50032 rootdelay:0.051606 reach:0x01
Wed Jun 25 22:02:46 2014 user.emerg syslog: Alarm clock




Kernel Log:
[    0.000000] Linux version 3.10.36 (wenbin@build.canaan-creative.com) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r40859) ) #2 Mon May 26 19:46:39 CST 2014
[    0.000000] MyLoader: sysp=388dd517, boardp=04505212, parts=7709ac36
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 803065b0, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc:
  • 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=TL-WR703N console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 28784k/32768k available (2210k kernel code, 3984k reserved, 589k data, 268k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is TP-LINK TL-WR703N v1
[    0.350000] bio: create slab <bio-0> at 0
[    0.360000] Switching to clocksource MIPS
[    0.360000] NET: Registered protocol family 2
[    0.370000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.370000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.370000] TCP: Hash tables configured (established 512 bind 512)
[    0.380000] TCP: reno registered
[    0.380000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.390000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.400000] NET: Registered protocol family 1
[    0.400000] PCI: CLS 0 bytes, default 32
[    0.420000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.420000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.430000] msgmni has been set to 56
[    0.440000] io scheduler noop registered
[    0.440000] io scheduler deadline registered (default)
[    0.440000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.450000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[    0.460000] console [ttyATH0] enabled, bootconsole disabled
[    0.470000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.480000] m25p80 spi0.0: found s25sl032p, expected m25p80
[    0.480000] m25p80 spi0.0: s25sl032p (4096 Kbytes)
[    0.490000] 5 tp-link partitions found on MTD device spi0.0
[    0.490000] Creating 5 MTD partitions on "spi0.0":
[    0.500000] 0x000000000000-0x000000020000 : "u-boot"
[    0.500000] 0x000000020000-0x00000011bffc : "kernel"
[    0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.520000] 0x00000011bffc-0x0000003f0000 : "rootfs"
[    0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.540000] mtd: device 2 (rootfs) set to be root filesystem
[    0.540000] 1 squashfs-split partitions found on MTD device rootfs
[    0.550000] 0x000000360000-0x0000003f0000 : "rootfs_data"
[    0.560000] 0x0000003f0000-0x000000400000 : "art"
[    0.560000] 0x000000020000-0x0000003f0000 : "firmware"
[    0.580000] libphy: ag71xx_mdio: probed
[    1.140000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    1.150000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.150000] TCP: cubic registered
[    1.160000] NET: Registered protocol family 17
[    1.160000] 8021q: 802.1Q VLAN Support v1.8
[    1.170000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.180000] Freeing unused kernel memory: 268K (8031d000 - 80360000)
[    4.890000] usbcore: registered new interface driver usbfs
[    4.900000] usbcore: registered new interface driver hub
[    4.900000] usbcore: registered new device driver usb
[    4.920000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.920000] ehci-platform: EHCI generic platform driver
[    4.930000] ehci-platform ehci-platform: EHCI Host Controller
[    4.930000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    4.940000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    4.970000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    4.970000] hub 1-0:1.0: USB hub found
[    4.970000] hub 1-0:1.0: 1 port detected
[    5.300000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    5.450000] hub 1-1:1.0: USB hub found
[    5.450000] hub 1-1:1.0: 2 ports detected
[    5.730000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[    7.180000] eth0: link up (100Mbps/Full duplex)
[    8.190000] jffs2: notice: (307) jffs2_build_xattr_subsystem: complete building xattr subsystem, 20 of xdatum (0 unchecked, 19 orphan) and 51 of xref (0 dead, 34 orphan) found.
[    8.230000] eth0: link down
[   11.150000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[   11.160000] Backport generated by backports.git backports-20140320-37-g5c33da0
[   11.170000] nf_conntrack version 0.5.0 (453 buckets, 1812 max)
[   11.200000] usbcore: registered new interface driver usbserial
[   11.200000] usbcore: registered new interface driver usbserial_generic
[   11.210000] usbserial: USB Serial support registered for generic
[   11.240000] xt_time: kernel timezone is -0000
[   11.280000] cfg80211: Calling CRDA to update world regulatory domain
[   11.280000] cfg80211: World regulatory domain updated:
[   11.290000] cfg80211:  DFS Master region: unset
[   11.290000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   11.300000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.310000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.320000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   11.320000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   11.330000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   11.340000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   11.350000] usbcore: registered new interface driver ftdi_sio
[   11.350000] usbserial: USB Serial support registered for FTDI USB Serial Device
[   11.360000] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
[   11.400000] usb 1-1.1: Detected FT232RL
[   11.400000] usb 1-1.1: Number of endpoints 2
[   11.400000] usb 1-1.1: Endpoint 1 MaxPacketSize 16384
[   11.410000] usb 1-1.1: Endpoint 2 MaxPacketSize 16384
[   11.410000] usb 1-1.1: Setting MaxPacketSize 64
[   11.430000] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
[   11.440000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.500000] usbcore: registered new interface driver pl2303
[   11.500000] usbserial: USB Serial support registered for pl2303
[   11.560000] ath: EEPROM regdomain: 0x0
[   11.560000] ath: EEPROM indicates default country code should be used
[   11.560000] ath: doing EEPROM country->regdmn map search
[   11.560000] ath: country maps to regdmn code: 0x3a
[   11.560000] ath: Country alpha2 being used: US
[   11.560000] ath: Regpair used: 0x3a
[   11.570000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.580000] cfg80211: Calling CRDA for country: US
[   11.580000] cfg80211: Regulatory domain changed to country: US
[   11.590000] cfg80211:  DFS Master region: FCC
[   11.590000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   11.600000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   11.610000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[   11.620000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[   11.630000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   11.630000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   11.640000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   19.980000] device eth0 entered promiscuous mode
[   20.470000] eth0: link up (100Mbps/Full duplex)
[   20.470000] br-lan: port 1(eth0) entered forwarding state
[   20.480000] br-lan: port 1(eth0) entered forwarding state
[   22.480000] br-lan: port 1(eth0) entered forwarding state


Using a North American Pool for NTP and Google NTP servers:
north-america.pool.ntp.org
time1.google.com
time2.google.com
time3.google.com


Thoughts?  Help?  Thanks for suggestions so far.  I'm still digging on my end.
panda86
Jr. Member
*
Offline Offline

Activity: 56


View Profile
June 26, 2014, 08:37:44 AM
 #4155

Hello,

If you have avalon 2 chips on avalon 1 board use this firmware.

http://downloads.canaan-creative.com/software/avalon1/20140227/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin

It solves problem with my machine, is buggy but it work. I have avalon 2 machine 200G. You can see on this link http://downloads.canaan-creative.com/# that avalon 2 on 200gh use this firmware.

I also try avalon 2 firmwares but no one working. Good luck Smiley

kevsteelio
Newbie
*
Offline Offline

Activity: 4


View Profile
June 27, 2014, 02:24:37 AM
 #4156

Wunderbar!!!

It worked!

Thanks!
archang
Newbie
*
Offline Offline

Activity: 1


View Profile
July 21, 2014, 04:16:00 AM
 #4157

Avalon2/Avalon3: A new firmware come out: 2014-07-19

Downloads:
    http://downloads.canaan-creative.com/software/avalon2/2014-07-19/

ChangeLog:
   Update OpenWrt to r41240
   Add new parameter for polling delay: --avalon2-polling-delay (Default: 20ms)
   Add new parameter for stratum ignore time: --stratum-ignore (Default: 30s)
   Add LED status on API log
   Support unlimited socket receive size for cgminer-api
   Try to detect module twice when start
   Don't count HW works on hashrate
   Support cgminer restart on status page
   Display indicator status on status page
   Change introduction on luci-cgminer


Communicate:
    http://lists.canaan-creative.com/cgi-bin/mailman/listinfo
    IRC: #avalon @freenode.net

Documents:
    https://en.bitcoin.it/wiki/Avalon


archang
johnd7
Jr. Member
*
Offline Offline

Activity: 53


View Profile
July 21, 2014, 04:19:23 AM
 #4158

Avalon2/Avalon3: A new firmware come out: 2014-07-19

Downloads:
    http://downloads.canaan-creative.com/software/avalon2/2014-07-19/

ChangeLog:
   Update OpenWrt to r41240
   Add new parameter for polling delay: --avalon2-polling-delay (Default: 20ms)
   Add new parameter for stratum ignore time: --stratum-ignore (Default: 30s)
   Add LED status on API log
   Support unlimited socket receive size for cgminer-api
   Try to detect module twice when start
   Don't count HW works on hashrate
   Support cgminer restart on status page
   Display indicator status on status page
   Change introduction on luci-cgminer


Communicate:
    http://lists.canaan-creative.com/cgi-bin/mailman/listinfo
    IRC: #avalon @freenode.net

Documents:
    https://en.bitcoin.it/wiki/Avalon


archang

Thank you for this good share, these updates is good appeal for pre-buyers like me.

Free SIGNs giving everyday. Be part, do not miss!. SqdDmZwtEa8HhVKaxyQtdF92CifGikLBDC
kevin01sb
Newbie
*
Offline Offline

Activity: 3


View Profile
August 24, 2014, 12:37:35 AM
 #4159

Can some one help take a look at my logs. Something is wrong. Getting 0 GH/s. Help will be rewarded BTC.

Finally got my rig connected to the pool. But now it does not seem to be mining. Why is MHS5sec = 0.
Link to Dashboard Screenshot:
https://drive.google.com/file/d/0BxmU6_TGSM0wNi12TWZpRkg3cWc/edit?usp=sharing

Here is the CGminer api log:
Code:
[Firmware Version] => 20131229
cgminer: 698d677
cgminer-openwrt-packages: aadd747+
luci: 346e3e7+
Reply was 'STATUS=S,When=1408839699,Code=70,Msg=CGMiner stats,Description=cgminer 3.9.0|STATS=0,ID=AVA0,Elapsed=87,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,baud=115200,miner_count=32,asic_count=10,timeout=45,frequency=282,fan1=0,fan2=0,fan3=0,temp1=0,temp2=0,temp3=0,temp_max=0,Device Hardware%=100.0000,no_matching_work=2,match_work_count1=42,match_work_count2=37,match_work_count3=32,match_work_count4=44,match_work_count5=40,match_work_count6=0,match_work_count7=37,match_work_count8=50,match_work_count9=0,match_work_count10=41,match_work_count11=34,match_work_count12=42,match_work_count13=39,match_work_count14=31,match_work_count15=38,match_work_count16=44,match_work_count17=0,match_work_count18=0,match_work_count19=0,match_work_count20=0,match_work_count21=0,match_work_count22=0,match_work_count23=0,match_work_count24=0,match_work_count25=0,match_work_count26=0,match_work_count27=0,match_work_count28=0,match_work_count29=0,match_work_count30=0,match_work_count31=0,match_work_count32=0,Controller Version=0,Avalon Chip=110,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=2122 0|STATS=1,ID=POOL0,Elapsed=87,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=1024.00000000,Min Diff=1024.00000000,Max Diff=1024.00000000,Min Diff Count=632,Max Diff Count=632,Times Sent=2,Bytes Sent=142,Times Recv=8,Bytes Recv=4340,Net Bytes Sent=142,Net Bytes Recv=4340|STATS=2,ID=POOL1,Elapsed=87,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=1024.00000000,Min Diff=1024.00000000,Max Diff=1024.00000000,Min Diff Count=632,Max Diff Count=632,Times Sent=2,Bytes Sent=142,Times Recv=6,Bytes Recv=2328,Net Bytes Sent=142,Net Bytes Recv=2328|STATS=3,ID=POOL2,Elapsed=87,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=1024.00000000,Min Diff=1024.00000000,Max Diff=1024.00000000,Min Diff Count=632,Max Diff Count=632,Times Sent=2,Bytes Sent=142,Times Recv=8,Bytes Recv=4273,Net Bytes Sent=142,Net Bytes Recv=4273|'
[STATUS] =>
(
   [STATUS] => S
   [When] => 1408839699
   [Cde] => 70
   [Msg] => CGMiner stats
   [Description] => cgminer 3.9.0
)
[STATS0] =>
(
   [STATS] => 0
   [ID] => AVA0
   [Elapsed] => 87
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [baud] => 115200
   [miner_count] => 32
   [asic_count] => 10
   [timeout] => 45
   [frequency] => 282
   [fan1] => 0
   [fan2] => 0
   [fan3] => 0
   [temp1] => 0
   [temp2] => 0
   [temp3] => 0
   [temp_max] => 0
   [Device Hardware%] => 100.0000
   [no_matching_work] => 2
   [match_work_count1] => 42
   [match_work_count2] => 37
   [match_work_count3] => 32
   [match_work_count4] => 44
   [match_work_count5] => 40
   [match_work_count6] => 0
   [match_work_count7] => 37
   [match_work_count8] => 50
   [match_work_count9] => 0
   [match_work_count10] => 41
   [match_work_count11] => 34
   [match_work_count12] => 42
   [match_work_count13] => 39
   [match_work_count14] => 31
   [match_work_count15] => 38
   [match_work_count16] => 44
   [match_work_count17] => 0
   [match_work_count18] => 0
   [match_work_count19] => 0
   [match_work_count20] => 0
   [match_work_count21] => 0
   [match_work_count22] => 0
   [match_work_count23] => 0
   [match_work_count24] => 0
   [match_work_count25] => 0
   [match_work_count26] => 0
   [match_work_count27] => 0
   [match_work_count28] => 0
   [match_work_count29] => 0
   [match_work_count30] => 0
   [match_work_count31] => 0
   [match_work_count32] => 0
   [Controller Version] => 0
   [Avalon Chip] => 110
   [USB Pipe] => 0
   [USB Delay] => r0 0.000000 w0 0.000000
   [USB tmo] => 2122 0
)
[STATS1] =>
(
   [STATS] => 1
   [ID] => POOL0
   [Elapsed] => 87
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 1024.00000000
   [Min Diff] => 1024.00000000
   [Max Diff] => 1024.00000000
   [Min Diff Count] => 632
   [Max Diff Count] => 632
   [Times Sent] => 2
   [Bytes Sent] => 142
   [Times Recv] => 8
   [Bytes Recv] => 4340
   [Net Bytes Sent] => 142
   [Net Bytes Recv] => 4340
)
[STATS2] =>
(
   [STATS] => 2
   [ID] => POOL1
   [Elapsed] => 87
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 1024.00000000
   [Min Diff] => 1024.00000000
   [Max Diff] => 1024.00000000
   [Min Diff Count] => 632
   [Max Diff Count] => 632
   [Times Sent] => 2
   [Bytes Sent] => 142
   [Times Recv] => 6
   [Bytes Recv] => 2328
   [Net Bytes Sent] => 142
   [Net Bytes Recv] => 2328
)
[STATS3] =>
(
   [STATS] => 3
   [ID] => POOL2
   [Elapsed] => 87
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 1024.00000000
   [Min Diff] => 1024.00000000
   [Max Diff] => 1024.00000000
   [Min Diff Count] => 632
   [Max Diff Count] => 632
   [Times Sent] => 2
   [Bytes Sent] => 142
   [Times Recv] => 8
   [Bytes Recv] => 4273
   [Net Bytes Sent] => 142
   [Net Bytes Recv] => 4273
)
ProfMac
Legendary
*
Offline Offline

Activity: 854



View Profile
August 24, 2014, 01:18:15 PM
 #4160

Can some one help take a look at my logs. Something is wrong. Getting 0 GH/s. Help will be rewarded BTC.

Finally got my rig connected to the pool. But now it does not seem to be mining. Why is MHS5sec = 0.
Link to Dashboard Screenshot:
https://drive.google.com/file/d/0BxmU6_TGSM0wNi12TWZpRkg3cWc/edit?usp=sharing



I notice that match_work 17-32 are all 0, and some of the match work 1-16 are also 0.  The screen shot shows a lot of HW errors.

When you mention "finally got it connected" I think perhaps the unit has never worked in your possession, so perhaps it was recently shipped.

The Avalons seemed to have a lot of reports of connections becoming loose during shipping.  You might open the case and reseat everything.

Also, since it is reporting HW failure, I would set the frequency to a low value.  I can't tell if this is an Avalon 1 or an Avalon 2.  The 282 MHz value is too high for an Avalon 1.



I try to be respectful and informed.
Pages: « 1 ... 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 [208] 209 210 211 212 213 214 215 216 217 218 219 220 221 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!