ollis miner
Newbie
Offline
Activity: 30
Merit: 0
|
|
April 28, 2018, 11:12:07 PM |
|
Hi guys, Sorry to bring this up, but I have been testing PhoenixMiner vs. Claymore's tonight and the (preliminary) results are not in favor of Claymore... I have a small test rig (Win10, latest amd drivers, 3x RX 570 4Gb modded bios) just to test latest drivers, miners etc before loading on to my other rigs. I have mined with the following batch files: PhoenixMiner.exe -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal 0xAddress.RigName -proto 3 -tt 65 -tstop 80 -tstart 60 -fanmin 80 -fanmax 100 EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xAddress.RigName -epsw x -platform 1 -etha 0 -eres 1 -gser 2 -r 1 -mport 0 -cvddc 980 -tt 65 -fanmin 50 -fanmax 100 -ttli 75 -tstop 78 -ethi 20 -etht 20 -cclock 1150 -mclock 2090 Reason for the test was I was getting big difference between reported and current hashrate at ethermine. Stale shares are always around 2-5%. What I see now after one hour mining with Phoenix, is this: https://www.dropbox.com/s/f6xxfowx3coyiiy/ethermine.png?dl=0Whats happening?
|
|
|
|
WhackOBill
Jr. Member
Offline
Activity: 73
Merit: 3
|
|
April 29, 2018, 01:31:36 AM |
|
Hi guys, Sorry to bring this up, but I have been testing PhoenixMiner vs. Claymore's tonight and the (preliminary) results are not in favor of Claymore... I have a small test rig (Win10, latest amd drivers, 3x RX 570 4Gb modded bios) just to test latest drivers, miners etc before loading on to my other rigs. I have mined with the following batch files: PhoenixMiner.exe -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal 0xAddress.RigName -proto 3 -tt 65 -tstop 80 -tstart 60 -fanmin 80 -fanmax 100 EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xAddress.RigName -epsw x -platform 1 -etha 0 -eres 1 -gser 2 -r 1 -mport 0 -cvddc 980 -tt 65 -fanmin 50 -fanmax 100 -ttli 75 -tstop 78 -ethi 20 -etht 20 -cclock 1150 -mclock 2090 Reason for the test was I was getting big difference between reported and current hashrate at ethermine. Stale shares are always around 2-5%. What I see now after one hour mining with Phoenix, is this: Whats happening? It looks like you're seeing the effect of the command lines working somewhat differently between the two programs. Claymore is obviously only running one card. I see you are mostly only supplying parameters for one card on the Claymore command line. For example -cvddc 980 instead of -cvddc 980,980,980 ... etc. I don't think you have to do it that way but it always helps remind me that I'm working with multiple cards.
|
|
|
|
WhackOBill
Jr. Member
Offline
Activity: 73
Merit: 3
|
|
April 29, 2018, 02:55:47 AM |
|
Claymore sees all 3 cards, thus the reported hash rate is correct. I agree that you should supply the clocks and voltages for all all cards to be consistant, but it isn't required to function. If you supply only one it is used on all cards in the system. In his case all cards would get -cvddc 980 as the parameter. I'll be interested to know the outcome.
Oh, I see it now. I missed the reported hashrate line in the graph. You think someone is in between him and the pool feeding him jobs but only giving him partial credit? Perhaps flipping some of his shares?
|
|
|
|
DUzP7sBr
Newbie
Offline
Activity: 13
Merit: 0
|
|
April 29, 2018, 06:54:55 AM |
|
Hi, after switching to 11.7 I get following after mining approximately half an hour:
Miner cannot initialize for 5 minutes, need to restart miner!
����������������������������������������������������������������ͻ � Claymore's Dual GPU Miner - v11.7 � � ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK � ����������������������������������������������������������������ͼ
ETH: 1 pool is specified Main Ethereum pool is eth-eu1.nanopool.org:9999 At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU, "z" to find best -dcri values OpenCL initializing...
AMD Cards available: 6 GPU #0: Ellesmere (Radeon RX 570 Series), 1251 MB available, 32 compute units (pci bus 1:0:0) GPU #0 recognized as Radeon RX 470/570 GPU #1: Ellesmere (Radeon RX 570 Series), 1251 MB available, 32 compute units (pci bus 2:0:0) GPU #1 recognized as Radeon RX 470/570 GPU #2: Ellesmere (Radeon RX 570 Series), 1251 MB available, 32 compute units (pci bus 3:0:0) GPU #2 recognized as Radeon RX 470/570 GPU #3: Ellesmere (AMD Radeon (TM) RX 470 Graphics), 1289 MB available, 32 compute units (pci bus 4:0:0) GPU #3 recognized as Radeon RX 470/570 GPU #4: Ellesmere (Radeon RX 570 Series), 1295 MB available, 32 compute units (pci bus 5:0:0) GPU #4 recognized as Radeon RX 470/570 GPU #5: Ellesmere (AMD Radeon (TM) RX 470 Graphics), 1295 MB available, 32 compute units (pci bus 6:0:0) GPU #5 recognized as Radeon RX 470/570 POOL/SOLO version AMD ADL library not found.
Any help would be highly appreciated. Alex
|
|
|
|
zordak7
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 29, 2018, 06:57:05 AM |
|
Hi everyone. Sorry for my eanglish I use lastversion for Linux Have 3 card RX 570 4Gb, but in miner i see AMD Cards available: 3 GPU #0: Ellesmere (Radeon RX 570 Series), 3631 MB available, 32 compute units (pci bus 1:0:0) GPU #0 recognized as Radeon RX 470/570 GPU #1: Ellesmere (Radeon RX 570 Series), 3857 MB available, 32 compute units (pci bus 5:0:0) GPU #1 recognized as Radeon RX 470/570 GPU #2: Ellesmere (Radeon RX 570 Series), 3857 MB available, 32 compute units (pci bus 7:0:0) GPU #2 recognized as Radeon RX 470/570 Bios moded 1180/2050 29-30Mh Why there is so little memory
|
|
|
|
Digital_Seytan
Jr. Member
Offline
Activity: 222
Merit: 2
digiseytan@walletofsatoshi.com
|
|
April 29, 2018, 02:41:45 PM |
|
Easy config windows claymore miner works with including claymore miner 11.7 UPDATE: Issue is now fixed and all new installations will work with Claymore miner 11.7 ! Windows 10 - EasyMiner releases Download Links https://mirrorace.com/m/2Mytrhttps://github.com/digitalpara/Download.windows.Easyminersmsk.2018.v0.7.10v0.7.1 - Added PIRL coin pool
|
DonateSATS:Digiseytan@WALLETOFSATOSHi.COM SHOPFREE: https://satsback.com/register/1QEJyGPlg4LN5kwx ETC+Zil Pool:https://k1pool.com/invite/895eb07555
|
|
|
bond007taz
Newbie
Offline
Activity: 26
Merit: 0
|
|
April 29, 2018, 04:55:29 PM Last edit: April 29, 2018, 05:06:17 PM by bond007taz |
|
Hi, after switching to 11.7 I get following after mining approximately half an hour:
Miner cannot initialize for 5 minutes, need to restart miner!
����������������������������������������������������������������ͻ � Claymore's Dual GPU Miner - v11.7 � � ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK � ����������������������������������������������������������������ͼ
ETH: 1 pool is specified Main Ethereum pool is eth-eu1.nanopool.org:9999 At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU, "z" to find best -dcri values OpenCL initializing...
AMD ADL library not found.
Any help would be highly appreciated. Alex
same issue with 11.7 under ubuntu 16.04
|
|
|
|
minerforaheartofgold
Newbie
Offline
Activity: 3
Merit: 0
|
|
April 29, 2018, 10:16:53 PM |
|
Hey guys,
Quick question...
I have an AMD 580 and an Nvidia 1060
Is there a way I can specify -tstop -tt -fanmin -fanmax -cclock -mclock -cvddc -mvddc to work with only with the AMD card?
|
|
|
|
kgminer
Jr. Member
Offline
Activity: 100
Merit: 6
|
|
April 29, 2018, 11:29:23 PM |
|
Hey guys,
Quick question...
I have an AMD 580 and an Nvidia 1060
Is there a way I can specify -tstop -tt -fanmin -fanmax -cclock -mclock -cvddc -mvddc to work with only with the AMD card?
I have one rig with both cards (1060 & 580) I find it easy to run two instances of claymore using "-platform" switch -platform selects GPUs manufacturer. 1 - use AMD GPUs only. 2 - use NVIDIA GPUs only. 3 - use both AMD and NVIDIA GPUs. Default value is "3". Makes it easy to troubleshoot as well.
|
|
|
|
minerforaheartofgold
Newbie
Offline
Activity: 3
Merit: 0
|
|
April 29, 2018, 11:58:58 PM |
|
Hey guys,
Quick question...
I have an AMD 580 and an Nvidia 1060
Is there a way I can specify -tstop -tt -fanmin -fanmax -cclock -mclock -cvddc -mvddc to work with only with the AMD card?
I have one rig with both cards (1060 & 580) I find it easy to run two instances of claymore using "-platform" switch -platform selects GPUs manufacturer. 1 - use AMD GPUs only. 2 - use NVIDIA GPUs only. 3 - use both AMD and NVIDIA GPUs. Default value is "3". Makes it easy to troubleshoot as well. Thank you for the reply. I'd rather not run two instances. Is there a way to do this with one?
|
|
|
|
kgminer
Jr. Member
Offline
Activity: 100
Merit: 6
|
|
April 30, 2018, 12:12:44 AM |
|
Hey guys,
Quick question...
I have an AMD 580 and an Nvidia 1060
Is there a way I can specify -tstop -tt -fanmin -fanmax -cclock -mclock -cvddc -mvddc to work with only with the AMD card?
I have one rig with both cards (1060 & 580) I find it easy to run two instances of claymore using "-platform" switch -platform selects GPUs manufacturer. 1 - use AMD GPUs only. 2 - use NVIDIA GPUs only. 3 - use both AMD and NVIDIA GPUs. Default value is "3". Makes it easy to troubleshoot as well. Thank you for the reply. I'd rather not run two instances. Is there a way to do this with one? you can specify these values per card. Read through the command line, might take some time to figure it out. Since you don't want to touch NVIDIA cards, specify zero. The easy way to run two claymore instances in your case. e.g. "-cclock 1000,1050,1100,0". here 1st three cards are amd and the last one is NVIDIA.
|
|
|
|
lmoe23
Newbie
Offline
Activity: 121
Merit: 0
|
|
April 30, 2018, 02:55:01 AM |
|
guys i have a 1060 3GB card running on a windows 10 64bit. 8GB RAM when i try the latest claymore the error is below
CUDA error 11- cannot allocate big buffer for DAG.
tried increasing virtual memory but no luck still not working tried putting -eres 0 but no luck still not working
any ideas guys? thanks
|
|
|
|
igotfits
|
|
April 30, 2018, 03:28:58 AM |
|
guys i have a 1060 3GB card running on a windows 10 64bit. 8GB RAM when i try the latest claymore the error is below
CUDA error 11- cannot allocate big buffer for DAG.
tried increasing virtual memory but no luck still not working tried putting -eres 0 but no luck still not working
any ideas guys? thanks
Had the same issue pop up outta nowhere, bump up your virtual memory. i went from 16gb to 50gb just because. But you have 3GB cards so your problem might be something else.
|
|
|
|
igotfits
|
|
April 30, 2018, 03:30:07 AM |
|
Im getting a weird issue with my AMD build, all the damn cards wont mine everything loads up well but hashrate across the board is 0
|
|
|
|
leonix007
Sr. Member
Offline
Activity: 1008
Merit: 297
Grow with community
|
|
April 30, 2018, 04:01:11 AM |
|
guys i have a 1060 3GB card running on a windows 10 64bit. 8GB RAM when i try the latest claymore the error is below
CUDA error 11- cannot allocate big buffer for DAG.
tried increasing virtual memory but no luck still not working tried putting -eres 0 but no luck still not working
any ideas guys? thanks
Had the same issue pop up outta nowhere, bump up your virtual memory. i went from 16gb to 50gb just because. But you have 3GB cards so your problem might be something else. seems 3GB is not working anymore on ETH and ETC, on epoch 186 https://bitcointalk.org/index.php?topic=2880023.100suggest to mine other coins on these GPU's
|
|
|
|
igotfits
|
|
April 30, 2018, 04:21:41 AM |
|
Im getting a weird issue with my AMD build, all the damn cards wont mine everything loads up well but hashrate across the board is 0
Seems like a afterburner and claymoreminer issue? when i shut down afterburner im able to mine just fine.
|
|
|
|
kgminer
Jr. Member
Offline
Activity: 100
Merit: 6
|
|
April 30, 2018, 04:42:58 AM |
|
Im getting a weird issue with my AMD build, all the damn cards wont mine everything loads up well but hashrate across the board is 0
Seems like a afterburner and claymoreminer issue? when i shut down afterburner im able to mine just fine. Uninstall afterburner claymore 11.7 supports OC and other settings via command prompt now. I am no longer using afterburner on any of my rigs.
|
|
|
|
lmoe23
Newbie
Offline
Activity: 121
Merit: 0
|
|
April 30, 2018, 06:41:03 AM |
|
guys i have a 1060 3GB card running on a windows 10 64bit. 8GB RAM when i try the latest claymore the error is below
CUDA error 11- cannot allocate big buffer for DAG.
tried increasing virtual memory but no luck still not working tried putting -eres 0 but no luck still not working
any ideas guys? thanks
Had the same issue pop up outta nowhere, bump up your virtual memory. i went from 16gb to 50gb just because. But you have 3GB cards so your problem might be something else. seems 3GB is not working anymore on ETH and ETC, on epoch 186 https://bitcointalk.org/index.php?topic=2880023.100suggest to mine other coins on these GPU's so i can't mine ETH using 1060 3GB card anymore?
|
|
|
|
nitrobg
Member
Offline
Activity: 413
Merit: 17
|
|
April 30, 2018, 07:48:37 AM |
|
so i can't mine ETH using 1060 3GB card anymore?
You can, just not with Windows 10.
|
|
|
|
Neymarpele
Newbie
Offline
Activity: 1
Merit: 0
|
|
April 30, 2018, 12:28:37 PM |
|
Hi guys! Could you recommend which altcoin (Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak) is much more profitable for mining right now? (Cards - Radeon RX 560)
|
|
|
|
|