asheko88
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 30, 2019, 04:07:12 PM |
|
hello.I have a problem use Windows 10 pro 6 rx570 4 giga divers 17.8.1 Use the latest version claymore 15 but hashrat is low 12 mh for card bat : setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x0e65d0Cc9aBeFb8fE504D7438057Bb9816a20560.ash2 -epsw x Anyone one can help
Did you switch to Compute from Graphics in GPU workload? https://www.amd.com/en/support/kb/faq/dh-024[/quote] This option is available in a version 17.10.2 im using 17.8.1
|
|
|
|
GodOfStars
Newbie
Offline
Activity: 49
Merit: 0
|
|
November 30, 2019, 04:17:02 PM |
|
What is your mining speed if i may ask with these settings?
43.8 - 44.2 MH/s Above settings with OverdriveNtool plus Soft Powerplay tables. AMDmem Tweak Vega 56 weak settings. Thank you, I get around the same hashrate without the hustle of tables and tweaks.
|
|
|
|
zeef
Newbie
Offline
Activity: 301
Merit: 0
|
|
November 30, 2019, 10:48:05 PM |
|
Have we to specify the -wd parameter to enable wacthdog in config file or are enable by default? I´m asking this because miner gets stucked on: 20:48:27:096 2374 ETH - Total Speed: 341.362 Mh/s, Total Shares: 208, Rejected: 0, Time: 00:35 20:48:27:098 2374 ETH: GPU0 47.980 Mh/s, GPU1 48.846 Mh/s, GPU2 0.000 Mh/s, GPU3 48.985 Mh/s, GPU4 48.786 Mh/s, GPU5 48.992 Mh/s, GPU6 48.784 Mh/s, GPU7 48.989 Mh/s 20:48:30:010 20ec em hbt: 0, fm hbt: 0, 20:48:30:010 20ec watchdog - thread 0 (gpu0), hb time 422 20:48:30:011 20ec watchdog - thread 1 (gpu0), hb time 47 20:48:30:011 20ec watchdog - thread 2 (gpu1), hb time 469 20:48:30:011 20ec watchdog - thread 3 (gpu1), hb time 109 20:48:30:012 20ec watchdog - thread 4 (gpu2), hb time 82547 20:48:30:015 20ec WATCHDOG: GPU 2 hangs in OpenCL call, exit 20:48:30:015 20ec watchdog - thread 5 (gpu2), hb time 82922 20:48:30:018 20ec WATCHDOG: GPU 2 hangs in OpenCL call, exit20:48:30:019 20ec watchdog - thread 6 (gpu3), hb time 485 20:48:30:020 20ec watchdog - thread 7 (gpu3), hb time 141 20:48:30:021 20ec watchdog - thread 8 (gpu4), hb time 125 20:48:30:021 20ec watchdog - thread 9 (gpu4), hb time 469 20:48:30:022 20ec watchdog - thread 10 (gpu5), hb time 141 20:48:30:023 20ec watchdog - thread 11 (gpu5), hb time 485 20:48:30:024 20ec watchdog - thread 12 (gpu6), hb time 125 20:48:30:024 20ec watchdog - thread 13 (gpu6), hb time 469 20:48:30:025 20ec watchdog - thread 14 (gpu7), hb time 485 20:48:30:025 20ec watchdog - thread 15 (gpu7), hb time 141 And doesn´t have restarted..
|
|
|
|
NCarter84
Jr. Member
Offline
Activity: 195
Merit: 4
|
|
November 30, 2019, 10:51:47 PM |
|
Hi there I am recently switching from Mining Moreno and I am new to Ehterium mining. On my main PC I have VEGA 64 with the latest drivers clocked to 1450 and memory to 1125 with 49MH speed and on my 13GPU VEGA 64 RIG I have 18.5.2 drivers Overdrive Ntool settings with 870mm memory to 1100 and clock to 1400 with 44MH speed. Can someone give me some info if there is a way to squeeze some extra hashes with some tweaks and settings, I have the default mining settings. Thank you
Come on over to Team Red Miner we will help you out and get your Vegas running at 48-49 mhs running their Ethash Miner. https://discord.gg/SBH5TPe
|
|
|
|
tg88
Legendary
Offline
Activity: 2478
Merit: 1480
Payment Gateway Allows Recurring Payments
|
|
December 01, 2019, 02:21:11 AM |
|
This option is available in a version 17.10.2 im using 17.8.1
The driver you are using is very old ... you need to install a more updated driver and change to compute mode, otherwise you will not be able to reach good speeds.
|
|
|
|
GodOfStars
Newbie
Offline
Activity: 49
Merit: 0
|
|
December 01, 2019, 02:45:18 AM |
|
Have we to specify the -wd parameter to enable wacthdog in config file or are enable by default? I´m asking this because miner gets stucked on: 20:48:27:096 2374 ETH - Total Speed: 341.362 Mh/s, Total Shares: 208, Rejected: 0, Time: 00:35 20:48:27:098 2374 ETH: GPU0 47.980 Mh/s, GPU1 48.846 Mh/s, GPU2 0.000 Mh/s, GPU3 48.985 Mh/s, GPU4 48.786 Mh/s, GPU5 48.992 Mh/s, GPU6 48.784 Mh/s, GPU7 48.989 Mh/s 20:48:30:010 20ec em hbt: 0, fm hbt: 0, 20:48:30:010 20ec watchdog - thread 0 (gpu0), hb time 422 20:48:30:011 20ec watchdog - thread 1 (gpu0), hb time 47 20:48:30:011 20ec watchdog - thread 2 (gpu1), hb time 469 20:48:30:011 20ec watchdog - thread 3 (gpu1), hb time 109 20:48:30:012 20ec watchdog - thread 4 (gpu2), hb time 82547 20:48:30:015 20ec WATCHDOG: GPU 2 hangs in OpenCL call, exit 20:48:30:015 20ec watchdog - thread 5 (gpu2), hb time 82922 20:48:30:018 20ec WATCHDOG: GPU 2 hangs in OpenCL call, exit20:48:30:019 20ec watchdog - thread 6 (gpu3), hb time 485 20:48:30:020 20ec watchdog - thread 7 (gpu3), hb time 141 20:48:30:021 20ec watchdog - thread 8 (gpu4), hb time 125 20:48:30:021 20ec watchdog - thread 9 (gpu4), hb time 469 20:48:30:022 20ec watchdog - thread 10 (gpu5), hb time 141 20:48:30:023 20ec watchdog - thread 11 (gpu5), hb time 485 20:48:30:024 20ec watchdog - thread 12 (gpu6), hb time 125 20:48:30:024 20ec watchdog - thread 13 (gpu6), hb time 469 20:48:30:025 20ec watchdog - thread 14 (gpu7), hb time 485 20:48:30:025 20ec watchdog - thread 15 (gpu7), hb time 141 And doesn´t have restarted.. I had a simillar stalling with one of my GPUs it turned out that the stalling GPU wasn't able to keep up with the low voltage that i put. Can I ask you if those cards are VEGAS and what are your settings both in the miner and the AMD panel and drivers please. Thank you in advance.
|
|
|
|
vetalfire
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 01, 2019, 05:34:38 PM |
|
6 x gigabyte GTX 1070 8gb Windows 10 4GB DDR4 Ram on Motherboard Additional 16-24GB Virtual Memory. 60GB SSD drive.
the farm stopped working on 6 cards, shows the DAG file in red on any card and immediately reboots the miner, disconnected one card, it works with 5 cards, please help.
|
|
|
|
zeef
Newbie
Offline
Activity: 301
Merit: 0
|
|
December 01, 2019, 06:10:39 PM |
|
Have we to specify the -wd parameter to enable wacthdog in config file or are enable by default? I´m asking this because miner gets stucked on: 20:48:27:096 2374 ETH - Total Speed: 341.362 Mh/s, Total Shares: 208, Rejected: 0, Time: 00:35 20:48:27:098 2374 ETH: GPU0 47.980 Mh/s, GPU1 48.846 Mh/s, GPU2 0.000 Mh/s, GPU3 48.985 Mh/s, GPU4 48.786 Mh/s, GPU5 48.992 Mh/s, GPU6 48.784 Mh/s, GPU7 48.989 Mh/s 20:48:30:010 20ec em hbt: 0, fm hbt: 0, 20:48:30:010 20ec watchdog - thread 0 (gpu0), hb time 422 20:48:30:011 20ec watchdog - thread 1 (gpu0), hb time 47 20:48:30:011 20ec watchdog - thread 2 (gpu1), hb time 469 20:48:30:011 20ec watchdog - thread 3 (gpu1), hb time 109 20:48:30:012 20ec watchdog - thread 4 (gpu2), hb time 82547 20:48:30:015 20ec WATCHDOG: GPU 2 hangs in OpenCL call, exit 20:48:30:015 20ec watchdog - thread 5 (gpu2), hb time 82922 20:48:30:018 20ec WATCHDOG: GPU 2 hangs in OpenCL call, exit20:48:30:019 20ec watchdog - thread 6 (gpu3), hb time 485 20:48:30:020 20ec watchdog - thread 7 (gpu3), hb time 141 20:48:30:021 20ec watchdog - thread 8 (gpu4), hb time 125 20:48:30:021 20ec watchdog - thread 9 (gpu4), hb time 469 20:48:30:022 20ec watchdog - thread 10 (gpu5), hb time 141 20:48:30:023 20ec watchdog - thread 11 (gpu5), hb time 485 20:48:30:024 20ec watchdog - thread 12 (gpu6), hb time 125 20:48:30:024 20ec watchdog - thread 13 (gpu6), hb time 469 20:48:30:025 20ec watchdog - thread 14 (gpu7), hb time 485 20:48:30:025 20ec watchdog - thread 15 (gpu7), hb time 141 And doesn´t have restarted.. I had a simillar stalling with one of my GPUs it turned out that the stalling GPU wasn't able to keep up with the low voltage that i put. Can I ask you if those cards are VEGAS and what are your settings both in the miner and the AMD panel and drivers please. Thank you in advance. Hi, I use the win10-64bit-radeon-software-adrenalin-edition-18.6.1-june13. Win 10 64 bit 1703 version. Seems stable now, maybe was i use vnc remote for seing the rig. I use ODNT like this: Gpu 1009@875mv Mem 1050@900mv for 8 vega 64 All the system consume 1900 watts. Have you corrected your problem increase the low voltage for gpu or mem? Shouldn´t miner restart himself when see this problem? or we have to wait some time? Best luck for you
|
|
|
|
barmalei1011
Newbie
Offline
Activity: 22
Merit: 0
|
|
December 02, 2019, 05:29:03 AM |
|
6 x gigabyte GTX 1070 8gb Windows 10 4GB DDR4 Ram on Motherboard Additional 16-24GB Virtual Memory. 60GB SSD drive.
the farm stopped working on 6 cards, shows the DAG file in red on any card and immediately reboots the miner, disconnected one card, it works with 5 cards, please help.
Page file add up to 32 gb
|
|
|
|
Blisk
|
|
December 02, 2019, 09:11:29 AM |
|
Did anyone ever really measure hashrate with claymores miner? I noticed in graph that my hashrate drops significally at 3-5 AM every night, until with some other miner doesn't it is almost all the time the same graph/hashrate!
|
|
|
|
bategojko74
Member
Offline
Activity: 220
Merit: 12
|
|
December 02, 2019, 03:30:13 PM |
|
Did anyone ever really measure hashrate with claymores miner? I noticed in graph that my hashrate drops significally at 3-5 AM every night, until with some other miner doesn't it is almost all the time the same graph/hashrate!
Maybe Claymore raises the temperature in the room more than the other miners in the specified time range. Another possible reason is that your computer makes some software updates every night at that time.
|
|
|
|
Blisk
|
|
December 02, 2019, 05:02:18 PM |
|
Did anyone ever really measure hashrate with claymores miner? I noticed in graph that my hashrate drops significally at 3-5 AM every night, until with some other miner doesn't it is almost all the time the same graph/hashrate!
Maybe Claymore raises the temperature in the room more than the other miners in the specified time range. Another possible reason is that your computer makes some software updates every night at that time. In any case when mining with other miner it should be the same but it is not.
|
|
|
|
bategojko74
Member
Offline
Activity: 220
Merit: 12
|
|
December 02, 2019, 10:35:22 PM |
|
Did anyone ever really measure hashrate with claymores miner? I noticed in graph that my hashrate drops significally at 3-5 AM every night, until with some other miner doesn't it is almost all the time the same graph/hashrate!
Maybe Claymore raises the temperature in the room more than the other miners in the specified time range. Another possible reason is that your computer makes some software updates every night at that time. In any case when mining with other miner it should be the same but it is not. If Claymore raises the temperature in the room more than the other miners then the performance will drop.
|
|
|
|
MDMurdock
Newbie
Offline
Activity: 6
Merit: 0
|
|
December 03, 2019, 01:32:27 AM |
|
I just upgraded to v15 on Windows 10 and now when running the start.bet I get a windows error "This app can't run on your PC".
Has no one else run into this?
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
December 03, 2019, 06:47:38 AM |
|
Did anyone ever really measure hashrate with claymores miner? I noticed in graph that my hashrate drops significally at 3-5 AM every night, until with some other miner doesn't it is almost all the time the same graph/hashrate!
I actually had this happen and it was driving me crazy and was trying all sorts of tests to find out why it was happening. However basically it was some antivirus program that ran every day at 3AM because it assumed the computer wasn't in use. The virus scanner doesn't really take too many resources however it does use some CPU power and the issue is that depending on the CPU you have, it might reduce your mining speed on the GPUs even though Claymore miner uses like 1% CPU usage most times. Just check what you have running in the background, most likely its some virus scanner.
|
|
|
|
pippercot
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 03, 2019, 11:59:56 AM |
|
Hi I have copied my previous bat file from my 11.9 version to the V15 now it says it mining to the default address instead of mine clearly something simple but help would be appreciated thanks
|
|
|
|
Binary100100
Member
Offline
Activity: 180
Merit: 10
|
|
December 04, 2019, 06:17:23 AM |
|
6 x gigabyte GTX 1070 8gb Windows 10 4GB DDR4 Ram on Motherboard Additional 16-24GB Virtual Memory. 60GB SSD drive.
the farm stopped working on 6 cards, shows the DAG file in red on any card and immediately reboots the miner, disconnected one card, it works with 5 cards, please help.
Increase the virtual memory by 8gb.
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
December 04, 2019, 10:11:05 PM |
|
6 x gigabyte GTX 1070 8gb Windows 10 4GB DDR4 Ram on Motherboard Additional 16-24GB Virtual Memory. 60GB SSD drive.
the farm stopped working on 6 cards, shows the DAG file in red on any card and immediately reboots the miner, disconnected one card, it works with 5 cards, please help.
Increase the virtual memory by 8gb. if he has space... use larger SSD now
|
|
|
|
Bael
Jr. Member
Offline
Activity: 87
Merit: 2
|
|
December 05, 2019, 12:24:51 AM |
|
Hello
Trying to configure strap and rxboost in a rig with 12 gpus I have some doubt, I would appreciate any help
Rig with rx 580, 570 4gb, 8gb, 9 gpus without problem, but in 3 of them I can't apply a strap because they restart.
The 3 gpus do not seem to have anything different from the rest, hynix memory, 4gb, sapphire (2 nitro and 1 pulse).
When I put for example strap 1, they restart, so I have 9 gpus with strap and 3 with strap 0, and rxboost 100 for all.
I have tried using other raisers, connecting a monitor emulator and nothing changes.
I am applying a strap over the previously modified bios.
Maybe if I put original bios strap works?
Apologies for writing bad english.
Regards : )
|
|
|
|
batsonxl
Member
Offline
Activity: 1202
Merit: 27
|
|
December 05, 2019, 04:00:32 AM |
|
Hello
Trying to configure strap and rxboost in a rig with 12 gpus I have some doubt, I would appreciate any help
Rig with rx 580, 570 4gb, 8gb, 9 gpus without problem, but in 3 of them I can't apply a strap because they restart.
The 3 gpus do not seem to have anything different from the rest, hynix memory, 4gb, sapphire (2 nitro and 1 pulse).
When I put for example strap 1, they restart, so I have 9 gpus with strap and 3 with strap 0, and rxboost 100 for all.
I have tried using other raisers, connecting a monitor emulator and nothing changes.
I am applying a strap over the previously modified bios.
Maybe if I put original bios strap works?
Apologies for writing bad english.
Regards : )
i wouldnt apply strap to allready modified bios, you have choice use modified bios or stock bios with claymores strap. flash your cards to stock bios then try again,and also dont forget virtual memory set high as you can.
|
|
|
|
|