leonArdo@margin (OP)
Legendary
Offline
Activity: 1989
Merit: 1008
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 21, 2018, 10:47:34 PM |
|
I Am trying to install Leonardo on a Raspberry PI but I am unsure how to install the files that are in the tar.zx
Is there a repository in which Leonardo is included to be installed via apt-get?
A few instructions would be great.
Have you tried? sudo apt-get install libqt5websockets5 sudo apt-get install qt5-svg wget http://marginsoftware.de/downloads/leonArdo-arm.tar.xztar xvJf leonArdo-arm.tar.xz cd leonArdo-arm/ ./run-leonArdo.sh All the best, Rene Thanks Rene. I am almost there but at execution, I get this: pi@raspberrypi:~ $ cd leonArdo-arm/ pi@raspberrypi:~/leonArdo-arm $ ./run-leonArdo.sh running on Raspbian ./leonArdo.arm: relocation error: /lib/arm-linux-gnueabihf/libpthread.so.0: symbol h_errno, version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference pi@raspberrypi:~/leonArdo-arm $ What Raspbian/Pi version are you using? All the best, Rene
|
|
|
|
money4good
Jr. Member
Offline
Activity: 56
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2018, 12:33:19 AM |
|
I Am trying to install Leonardo on a Raspberry PI but I am unsure how to install the files that are in the tar.zx
Is there a repository in which Leonardo is included to be installed via apt-get?
A few instructions would be great.
Have you tried? sudo apt-get install libqt5websockets5 sudo apt-get install qt5-svg wget http://marginsoftware.de/downloads/leonArdo-arm.tar.xztar xvJf leonArdo-arm.tar.xz cd leonArdo-arm/ ./run-leonArdo.sh All the best, Rene Thanks Rene. I am almost there but at execution, I get this: pi@raspberrypi:~ $ cd leonArdo-arm/ pi@raspberrypi:~/leonArdo-arm $ ./run-leonArdo.sh running on Raspbian ./leonArdo.arm: relocation error: /lib/arm-linux-gnueabihf/libpthread.so.0: symbol h_errno, version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference pi@raspberrypi:~/leonArdo-arm $ What Raspbian/Pi version are you using? All the best, Rene If using the desktop GUI you can go to download folder and “extract here...” then go in and double click the .sh file and hit execute. Just a graphical way of doing the same thing.
|
|
|
|
hackbyte
Copper Member
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 282
Merit: 111
Doing cryptocurrency stuff since 2010.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2018, 02:04:27 AM |
|
Edit[/i]: It seems that bittrex actually changed it's api in some ways, i cant set up any orders, i can't see any active or filled orders and i don't get the correct values of my wallets.... so, it's actually completely broken. Even with leonArdo 3.7.7.......
Thanks for your thorough reporting. You help is very much apprenticed! We are looking into the Bittrex API issues. EDIT: Is anyone still having problems? Looking like a temp problem for a longer period if time with the Bittrex API. All the best, Rene I actually tried it again a few moments agot ... no temporary problem but still persistent....... Hacky
|
Cryptocurrency Mining, Gambling, Lending, Trading, Staking .. So much to do with them, since 2010! Donations-> 1bytoroRvXLGc1FWTob5h1oH92VMdUSFi Questions? Dunno! To the moon? Mün or bust! Lust auf klönschnack? Schau bei uns rein im Cryptotalk (D-A-CH+EU) unter https://t.me/cryptotalkgerman
|
|
|
gnoe
Newbie
Offline
Activity: 61
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2018, 06:39:29 AM |
|
I Am trying to install Leonardo on a Raspberry PI but I am unsure how to install the files that are in the tar.zx
Is there a repository in which Leonardo is included to be installed via apt-get?
A few instructions would be great.
Have you tried? sudo apt-get install libqt5websockets5 sudo apt-get install qt5-svg wget http://marginsoftware.de/downloads/leonArdo-arm.tar.xztar xvJf leonArdo-arm.tar.xz cd leonArdo-arm/ ./run-leonArdo.sh All the best, Rene Whenever I try installing gt5-svg on my Raspberry/Raspbian setup, I get the following message. pi@raspberrypi:~ $ sudo apt-get install qt5-svg Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package qt5-svg pi@raspberrypi:~ $ The strange thing is that leoNardo runs without issues after this failed package installation. Any idea? Thanks.
|
|
|
|
crynvestor
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 94
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2018, 08:04:43 AM |
|
Great and awesome service, please keep it up! Any news on Binance addtion?
|
|
|
|
leonArdo@margin (OP)
Legendary
Offline
Activity: 1989
Merit: 1008
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2018, 09:03:08 AM |
|
Edit[/i]: It seems that bittrex actually changed it's api in some ways, i cant set up any orders, i can't see any active or filled orders and i don't get the correct values of my wallets.... so, it's actually completely broken. Even with leonArdo 3.7.7.......
Thanks for your thorough reporting. You help is very much apprenticed! We are looking into the Bittrex API issues. EDIT: Is anyone still having problems? Looking like a temp problem for a longer period if time with the Bittrex API. All the best, Rene I actually tried it again a few moments agot ... no temporary problem but still persistent....... Hacky Hi Hacky, have you been running many market maker bots as well? Seems not to be a global issue. Maybe you ran into the problem with to little filled orders on Bittrex? All the best, Rene
|
|
|
|
leonArdo@margin (OP)
Legendary
Offline
Activity: 1989
Merit: 1008
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2018, 09:20:34 AM |
|
I Am trying to install Leonardo on a Raspberry PI but I am unsure how to install the files that are in the tar.zx
Is there a repository in which Leonardo is included to be installed via apt-get?
A few instructions would be great.
Have you tried? sudo apt-get install libqt5websockets5 sudo apt-get install qt5-svg wget http://marginsoftware.de/downloads/leonArdo-arm.tar.xztar xvJf leonArdo-arm.tar.xz cd leonArdo-arm/ ./run-leonArdo.sh All the best, Rene Whenever I try installing gt5-svg on my Raspberry/Raspbian setup, I get the following message. pi@raspberrypi:~ $ sudo apt-get install qt5-svg Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package qt5-svg pi@raspberrypi:~ $ The strange thing is that leoNardo runs without issues after this failed package installation. Any idea? Thanks. What version of Raspbian are you runnig and on which hardware rev? All the best, Rene
|
|
|
|
hackbyte
Copper Member
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 282
Merit: 111
Doing cryptocurrency stuff since 2010.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2018, 09:38:18 AM |
|
I actually tried it again a few moments agot ... no temporary problem but still persistent.......
Hacky
Hi Hacky, have you been running many market maker bots as well? Seems not to be a global issue. Maybe you ran into the problem with to little filled orders on Bittrex? All the best, Rene Yeah you can maybe consider me to be a poweruser ... So yes, i had 3 or 5 MarginMakers running over there. I'd set them up to let the orders stay for _at least_ 30 minutes or longer..... I wonder, would i not get an information from bittrex if they restrict my account because of whatever reason? ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Hacky
|
Cryptocurrency Mining, Gambling, Lending, Trading, Staking .. So much to do with them, since 2010! Donations-> 1bytoroRvXLGc1FWTob5h1oH92VMdUSFi Questions? Dunno! To the moon? Mün or bust! Lust auf klönschnack? Schau bei uns rein im Cryptotalk (D-A-CH+EU) unter https://t.me/cryptotalkgerman
|
|
|
cryptolelefla
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 121
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2018, 09:58:22 AM Last edit: January 22, 2018, 11:28:13 AM by cryptolelefla |
|
I Am trying to install Leonardo on a Raspberry PI but I am unsure how to install the files that are in the tar.zx
Is there a repository in which Leonardo is included to be installed via apt-get?
A few instructions would be great.
Have you tried? sudo apt-get install libqt5websockets5 sudo apt-get install qt5-svg wget http://marginsoftware.de/downloads/leonArdo-arm.tar.xztar xvJf leonArdo-arm.tar.xz cd leonArdo-arm/ ./run-leonArdo.sh All the best, Rene Whenever I try installing gt5-svg on my Raspberry/Raspbian setup, I get the following message. pi@raspberrypi:~ $ sudo apt-get install qt5-svg Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package qt5-svg pi@raspberrypi:~ $ The strange thing is that leoNardo runs without issues after this failed package installation. Any idea? Thanks. Got same error... on rb pi3 on raspbian STRETCH. Hardware : BCM2835 Revision : a22082 Serial : 0000000049606e4b
|
|
|
|
leonArdo@margin (OP)
Legendary
Offline
Activity: 1989
Merit: 1008
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2018, 11:26:42 AM |
|
Hey guys, quick update for everyone using leonArdo on a Raspberry Pi over VNC. A couple of you have been experiencing weird keyboard issues which came down to Qt5 needing a VNC server with the XKEYBOARD extension. One VNC server that's available on ARM and that we've tested successfully with Raspbian on the server side and both Windows and Linux on the client side is called x11vnc. On Raspbian at least it's already in the package manager, so installation should be a matter of doing a "sudo apt install x11vnc". If you are reading this with the same issue on non-ARM machines, you have another choice called TurboVNC. Hope this helps you guys using leonArdo in a way that suits your needs! If you have any further update on your side, such as other server options or configurations that work particularly well for you, please don't hesitate to pass them along! Christian
|
|
|
|
leonArdo@margin (OP)
Legendary
Offline
Activity: 1989
Merit: 1008
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2018, 12:03:04 PM |
|
I Am trying to install Leonardo on a Raspberry PI but I am unsure how to install the files that are in the tar.zx
Is there a repository in which Leonardo is included to be installed via apt-get?
A few instructions would be great.
Have you tried? sudo apt-get install libqt5websockets5 sudo apt-get install qt5-svg wget http://marginsoftware.de/downloads/leonArdo-arm.tar.xztar xvJf leonArdo-arm.tar.xz cd leonArdo-arm/ ./run-leonArdo.sh All the best, Rene Whenever I try installing gt5-svg on my Raspberry/Raspbian setup, I get the following message. pi@raspberrypi:~ $ sudo apt-get install qt5-svg Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package qt5-svg pi@raspberrypi:~ $ The strange thing is that leoNardo runs without issues after this failed package installation. Any idea? Thanks. Got same error... on rb pi3 on raspbian STRETCH. Hardware : BCM2835 Revision : a22082 Serial : 0000000049606e4b Ok, to clarify: the run-leonArdo.sh script should run out of the box, except for libqt5websockets5 having to be installed on Raspbian and on Raspbian only. If an installation of extra packages is necessary on some systems, please let us know where exactly this is the case. I realize this is confusing, so I'm going to automate the installation of the websockets package in the run script. BTW, the Qt SVG package on Raspbian is called libqt5svg5. So should you need it, that's what you need, but I don't think you need it ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Thanks to everyone who helps us tame this very diverse zoo that is the ARM ecosystem! Christian
|
|
|
|
criptick
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2018, 01:11:17 PM |
|
Hi, i've downloaded the demo to play with before buying, i can't change anything in 'Additional Options', is that because it's a demo ?
Thanks, Gary.
|
|
|
|
criptick
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2018, 01:40:57 PM |
|
No worries it's because the bot was running.
|
|
|
|
dbolivar
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 119
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2018, 04:34:16 PM |
|
Hmm interesting, so that's why this weekend, when I tested leonArdo in a small Linux remote server I have, over VNC, the keyboard was crazy when using TightVNC server. However, when I switched to Xvnc4 (vnc4server package), everything was good, confirming my guess it was a VNC server problem. So, add TightVNC to your blacklist, and Xvnc4 (vnc4server) to your whitelist. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Hey guys, quick update for everyone using leonArdo on a Raspberry Pi over VNC. A couple of you have been experiencing weird keyboard issues which came down to Qt5 needing a VNC server with the XKEYBOARD extension. One VNC server that's available on ARM and that we've tested successfully with Raspbian on the server side and both Windows and Linux on the client side is called x11vnc. On Raspbian at least it's already in the package manager, so installation should be a matter of doing a "sudo apt install x11vnc". If you are reading this with the same issue on non-ARM machines, you have another choice called TurboVNC. Hope this helps you guys using leonArdo in a way that suits your needs! If you have any further update on your side, such as other server options or configurations that work particularly well for you, please don't hesitate to pass them along! Christian
|
|
|
|
thomasmay
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2018, 11:05:32 PM |
|
I Am trying to install Leonardo on a Raspberry PI but I am unsure how to install the files that are in the tar.zx
Is there a repository in which Leonardo is included to be installed via apt-get?
A few instructions would be great.
Have you tried? sudo apt-get install libqt5websockets5 sudo apt-get install qt5-svg wget http://marginsoftware.de/downloads/leonArdo-arm.tar.xztar xvJf leonArdo-arm.tar.xz cd leonArdo-arm/ ./run-leonArdo.sh All the best, Rene Thanks Rene. I am almost there but at execution, I get this: pi@raspberrypi:~ $ cd leonArdo-arm/ pi@raspberrypi:~/leonArdo-arm $ ./run-leonArdo.sh running on Raspbian ./leonArdo.arm: relocation error: /lib/arm-linux-gnueabihf/libpthread.so.0: symbol h_errno, version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference pi@raspberrypi:~/leonArdo-arm $ What Raspbian/Pi version are you using? All the best, Rene OK so this happened when dealing with a PI rev3 with a 2017-3-03 build on Jessie. I tried updating the OS, but like always something broke. So I did a clean install to the current rev of Stretch. I did the before mentioned procedure and it worked. I did modify qt5-svg to libqt5svg5, like mentioned in the tread. LEONARDO IS RUNNING on the Pi Only thought I get this: pi@raspberrypi:~ $ cd leonArdo-arm/ pi@raspberrypi:~/leonArdo-arm $ ./run-leonArdo.sh running on Raspbian libEGL warning: DRI2: failed to authenticate
** (leonArdo.arm:8645): WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files Not sure what to make of it but I hope this can help the dev. team. PS: loving the software. Can't wait what is in store..
|
|
|
|
CTShaman
Jr. Member
Offline
Activity: 253
Merit: 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2018, 12:27:16 AM |
|
Is this one for the X-Files? EMC2 on Bittrex ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fpreview.ibb.co%2FiVBPPG%2Fimage.png&t=665&c=41VyvSNcGwOe8g)
|
Bucket List Item #10: Buy and sell a WALL with margin.
|
|
|
Grumble Guff
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2018, 09:11:10 AM |
|
Hi!
I just tried updating the Arm version on my Raspberry Pi to 3.7.8 and I get the following error when trying to unzip leonArdo-arm.tar.xz:
leonArdo-arm/lib/libxcb-xinerama.so.0 leonArdo-arm/lib/libXcomposite.so.1 leonArdo-arm/lib/libwayland-server.so.0 leonArdo-arm/lib/libQt5XcbQpa.so.5 xz: (stdin): Compressed data is corrupt tar: Unexpected EOF in archive tar: Unexpected EOF in archive tar: Error is not recoverable: exiting now
|
|
|
|
criptick
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2018, 12:56:14 PM |
|
Leonardo should have its own forum, rather than people having to wade through this mega-thread, then we can have tech support sorted by platform, issue type etc.
|
|
|
|
Grumble Guff
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2018, 01:16:23 PM |
|
Leonardo should have its own forum, rather than people having to wade through this mega-thread, then we can have tech support sorted by platform, issue type etc.
I agree, there is so much information losrt somewhere in this 178 page megathread! Even a dedicated subreddit would be better than this!
|
|
|
|
leonArdo@margin (OP)
Legendary
Offline
Activity: 1989
Merit: 1008
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2018, 01:37:00 PM Last edit: January 23, 2018, 02:16:39 PM by leonArdo@margin |
|
Leonardo should have its own forum, rather than people having to wade through this mega-thread, then we can have tech support sorted by platform, issue type etc.
I agree, there is so much information losrt somewhere in this 178 page megathread! Even a dedicated subreddit would be better than this! Agreed. Until then the best way to get support is to write a mail to support@marginsoftware.deWe also enabled an intercom chat bubble on the website so you can get support there too. Best wishes, Jonathan
|
|
|
|
|