[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[KeezAZA]

Can I use mixed amd and nvidia cards in one rig using smOS?

Nope. SMOS is built as three seperate images for the three R and RX and NV(Nvidia).
The OS is very fussy from the looks of things.

Nvidia cards take  a long time to detect.

Are you sure about it ? When I tried RX version works for Nvidia, only OC didn't work, but it was pretty damn stable.

If that be the case I would definitely try it tonight as i am rebuilding my RX rig.
Based on all the posts in this forum they would not work.
NV image detects my P106 cards but does nothing with them so I would RX a go before i can SMOS and go back to Windows.

[shoasg]

anyone have any idea about the error i posted? it got stuck at that sreen for 2 hours today too
http://i802.photobucket.com/albums/yy306/shoaibasghar/simple%20mine%20error.jpg

[twofreckles]

For RX580 GPU I recommend core 1150 and mem 2200 for SMOS. Powerstage will not help a lot to reduce power drawn from the wall. I was using powerstage 4 (default) but power drawn from the wall (7x RX580) was too high for me (1350W) and not acceptable. As long as no undervolting implemented in SMOS I will use ethOS (can undervolt my rig and have 950W from the wall).

with offset whole rigt with 6 gpus should do around 850-900W, but what you are saying is kinda solution as well. I know similar feature should come to SMos as well.

[marimach77]

For RX580 GPU I recommend core 1150 and mem 2200 for SMOS. Powerstage will not help a lot to reduce power drawn from the wall. I was using powerstage 4 (default) but power drawn from the wall (7x RX580) was too high for me (1350W) and not acceptable. As long as no undervolting implemented in SMOS I will use ethOS (can undervolt my rig and have 950W from the wall).

with offset whole rigt with 6 gpus should do around 850-900W, but what you are saying is kinda solution as well. I know similar feature should come to SMos as well.

I'm trying to avoid any BIOS modification as possible. Just replaced required straps to get 31MH/s per GPU. As soon as SMOS has undervolting implemented (like ethOS) I will back to SMOS. For now ethOS is the winner.

[avilolo0101]

I have 2 1060 rigs that now work on simplemining and I have a problem with the hash rate they get in the flypool.
each rig is undervalued in about 250 sols in zcash mining even on simple mining I'm get the right amount of sols.
its really weird cause fly pool is very stable for along time for me on windows, but on simple mining I get a lot less power.
its make sense? someone know how to solve it?
in the end windows have the best performance the guys in simple mining need to catch up.right now I don't see any reason to use this
cost money and less power - easy equation !!

[twofreckles]

For RX580 GPU I recommend core 1150 and mem 2200 for SMOS. Powerstage will not help a lot to reduce power drawn from the wall. I was using powerstage 4 (default) but power drawn from the wall (7x RX580) was too high for me (1350W) and not acceptable. As long as no undervolting implemented in SMOS I will use ethOS (can undervolt my rig and have 950W from the wall).

with offset whole rigt with 6 gpus should do around 850-900W, but what you are saying is kinda solution as well. I know similar feature should come to SMos as well.

I'm trying to avoid any BIOS modification as possible. Just replaced required straps to get 31MH/s per GPU. As soon as SMOS has undervolting implemented (like ethOS) I will back to SMOS. For now ethOS is the winner.

For me vBios modification ain't a problem. I don't mind as long as results are better. I haven't tested ethos against offset yet. I will let you know as soon as I check it. For now it looks offset is a better way to do it tho.

[mafaz]

so when can we expect dagfix with working powerstage control?

[AltcoinScamfinder]

Has anyone tried running Simplemining OS on Pandaminers? Any input? I have both B5+ and B3+ i figured I might try out.

[davemanet]

Anyone mine Monero?

I currently mine Ethereum and overclocked my cards for Ethereum. I want to switch to Monero now.

Can I keep the same overclock values?

If not, what percentage should I change it so that it can mine Monero?  For example if Ethereum if 1000 core, 2000 memory, what should I change values to mine Monero?

[Macflo]

I'm mining Monero , I have 1100/1850

[RfBTC]

Hi guys,  do you know  command line for dual mining  in SMOS  (sgminer)  ?  its possible mining XMR + Decred ?

[drawer]

What the hell is going on with this shity CloudFlare on simplemining.net It's blocking simple pannel... soryy tytanick can U just shut it down ? Since 2 days i don have acces to my rigs !!!! it's ridiculous.....

[tytanick]

What the hell is going on with this shity CloudFlare on simplemining.net It's blocking simple pannel... soryy tytanick can U just shut it down ? Since 2 days i don have acces to my rigs !!!! it's ridiculous.....

Hi, please write to me at admin@simplemining.net with your external ip address and output what you have on this website:
https://simplemining.net/cdn-cgi/trace
and
https://simplemining.net (make screenshot and copy text)
And also tell me how much rigs you have, all those info send me as soon as possible on email, NOT HERE !.
I dont see any global problem.
Anyone who has problem that their rig is offline in dahsboard but in deed its hashing ok in pool, please send me those data TO EMAIL.

[davemanet]

I'm mining Monero , I have 1100/1850

if you switch to Eth would you keep same values?  or what would you change it to?

[twofreckles]

If that be the case I would definitely try it tonight as i am rebuilding my RX rig.
Based on all the posts in this forum they would not work.
NV image detects my P106 cards but does nothing with them so I would RX a go before i can SMOS and go back to Windows.

OK P106 and standard GTX1060 are a little bit different things. I think P106 got special drivers so not sure if that combo will work. What I know for sure for my nVidia GTX1070 RX version of image worked without OC

[twofreckles]

Two additional questions:
- how to know which voltage controller does each card have?
- where to find information about offset vbios mod for each kind of voltage controller?

Thanks again

About first question in general i2c dump

For second thing it ain't that simple. As far as I'm concerned for some controllers it ain't possible. The good thing is 90% of GPUs are based on 2 controllers where adding offset works. If you want to work it out hit me a pm.

[H0RV4T]

Someone has same problem? OC on nvidia cards dosnt work anymore, it was all ok but now whatever i put i got stock cards.

And i got error "Failed to connect to Mir: Failed to connect to server socket, no such file or directory"

Edit: Reflashed with new image, for now it is ok.

[PowerEleven]

Hi guys,
Problem unseen on FAQ and in google:

Building rigs with setup:

PSU - gold 1250w. all sata risers.
MOBO - asrock H81 pro btc 2.0.
Pentium g3420, 4gb ram.
GPU - some rigs build with Gigabyte 1070 some build with inno3d 1070.
Miner - ewbf 0.3.4b.
OC - Core 0, Memory 0, Power limit 99w, target 65c, min fan 40%.

Problem:

only on rigs with inno3d - after some time mining - error - GPU fallen off the bus.

Interchange PSU's, MOBO's, GPU's, risers - does not give result.

Any idea 

[FirstRigger]

In fact I've done (following steps on this video https://www.youtube.com/watch?v=sc5qFEIMYTs&feature=youtu.be) but as I've said I haven't achieved very good results... could you upload your pulse vbios to see exactly what have you changed?

Thank you again

I can't. If I remember correctly I got rx 570 pulse. So vbios will be different.

What does it mean you haven't achieved very good results. Can you see differance in power drain from the wall?

No, this is the problem, I can't see difference in power drain from wall, I've done following tests on vrom:

- added offset using instructions on the youtube link I've mentioned before (and trying different values: -100mv, -150mv)
- tried to change values on dpm state 0 (the rest of the rom values seems references instead voltages, so I thought that changing voltage for dpm state 0 and specifying this state on SMOS oc settings it will work). I've also changed voltages on memory dpm states (same value than on gpu dpm state 0)
- tried to change tdp values

Usually there is no change on power drain (from wall), and when there is usually the change is worse than the original. My (bad) numbers are:
- rx580 x 4 8g (2 pulse and 2 nitro se), with 3 usb risers and 1 connected directly to MB, 850W corsair PSU
- mining monero 835W from wall (~3000h/s) oc values 1275/2250 dpm state 2 (which is the one I'm using right now)
- mining ethereum 1120W from wall (without dag fix, with dag fix 1500W from wall) oc values 1175/2250 dpm state 2

Which oc settings are you using on SMOS?

For RX580 GPU I recommend core 1150 and mem 2200 for SMOS. Powerstage will not help a lot to reduce power drawn from the wall. I was using powerstage 4 (default) but power drawn from the wall (7x RX580) was too high for me (1350W) and not acceptable. As long as no undervolting implemented in SMOS I will use ethOS (can undervolt my rig and have 950W from the wall).

Hi, 950W with 7x RX580? Its perfect, I think.
I have 11x RX580 Nitro+ 8gb, with ETH only mode need 1790W from wall (with modded bios, 30.9Mh/s/card). Its really high yet.
What is your setup in ethOS for voltage? Thank you.

[Warlockmng]

so when can we expect dagfix with working powerstage control?

Same question here, it's seems those updates are not so important for the devs of SMOS. I thinking about moving all my rigs to ethOS this week, I'm losing 12-15mhs per RIG with SMOS