Bitcoin Forum
November 18, 2017, 09:08:57 AM *
News: Latest stable version of Bitcoin Core: 0.15.1  [Torrent].
 
   Home   Help Search Donate Login Register  
Pages: « 1 ... 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 [95] 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 ... 284 »
  Print  
Author Topic: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4  (Read 322233 times)
Dhx
Newbie
*
Offline Offline

Activity: 8


View Profile
July 15, 2017, 03:02:01 AM
 #1881

Quick question that I'm sure many of you have solved various ways.  Any thoughts on the safest way to power the 7th GPU(1070)/riser with an EVGA 1300 G2?  Custom adapter cable? Molex to 6+2?  Two of the VGA cables have a split connection from the PSU, but I didn't want to connect two cards and two risers split twice from the same cable. 

Thanks for any quick thoughts.

There are dual molex to pcie 6+2 adapters; if you use both molex cables 2 different molex cables(from the psu each from a different molex port) into one adapter it should be able to handle 160 watts.  I would keep it below 135 if you use this method.


Thanks for the reply, fullzero.  I had to do something a little more taxing due to a bad riser.  One of my risers is molex and I'm currently feeding that directly from the PSU with no desire to use a SATA adapter. 

Is the following a terrible shorterm solution (until I can get another working 6 pin riser)?


                                       MOLEX Riser (Zotac 1070 powered from VGA on card)
                        MOLEX <   MOLEX to 6 PIN adapter
PSU (1300 G2) <                                                    > 6 PIN Y to dual 6+2 > 6 PIN Riser + Zotac 1070
                        MOLEX <   MOLEX to 6 PIN adapter


Two molex from the PSU.  One feeds a molex riser with a 1070 in that riser (powered from VGA on the card) as well as one half of the dual molex to 6 pin adapter.  The other half is fed clean from the PSU.  All cards are at 125 PL.  It's currently running but I'd like a second opinion.
1510996137
Hero Member
*
Offline Offline

Posts: 1510996137

View Profile Personal Message (Offline)

Ignore
1510996137
Reply with quote  #2

1510996137
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1510996137
Hero Member
*
Offline Offline

Posts: 1510996137

View Profile Personal Message (Offline)

Ignore
1510996137
Reply with quote  #2

1510996137
Report to moderator
kw1k
Newbie
*
Offline Offline

Activity: 13


View Profile
July 15, 2017, 03:59:09 AM
 #1882

I have tried to compile the newest ccminer for gtx 1060 for ages now, I cannot get it to work. This happens every time I try to compile.

akefile:1728: recipe for target 'ccminer-bignum.o' failed
make[2]: *** [ccminer-bignum.o] Error 1
make[2]: *** Waiting for unfinished jobs....
mv -f .deps/ccminer-api.Tpo .deps/ccminer-api.Po
mv -f .deps/ccminer-util.Tpo .deps/ccminer-util.Po
mv -f .deps/ccminer-ccminer.Tpo .deps/ccminer-ccminer.Po
make[2]: Leaving directory '/home/m1/ccminer'
Makefile:2028: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/m1/ccminer'
Makefile:629: recipe for target 'all' failed
make: *** [all] Error 2


It is probably too difficult for non CS to compile ccminer; the current devs of each fork should really make an updated guide / mitigate some of the problems encountered when compiling.

Give me a link to the version / fork of ccminer you want to use and I will compile it optimized for 1060s.

I sent you a pm earlier on the miner to compile but I have found a faster one for chc, https://github.com/alexis78/ccminer.git
dbolivar
Member
**
Offline Offline

Activity: 61


View Profile
July 15, 2017, 04:07:51 AM
 #1883

Guys, I've been playing with the Power Limit, and don't quite understand something: by default my cards draw 180W each, but I could enforce a 125W limit without affecting the hash rate, and stable (keeping the OC settings I use). How is that possible? I'm only mining ETH with Genoil at the moment; since it mostly use the memory, I guess a underutilized GPU processor could allow that. If that's the case, dual-mining would need a higher limit, right? What would be the symptoms of needing to raise the power limit?
idle_shell
Newbie
*
Offline Offline

Activity: 6


View Profile
July 15, 2017, 05:04:40 AM
 #1884

All,

Was working great in 16 but having issues dual mining ETC and SC with Claymore in 18.  Got ETC working and working WELL (yay higher hashrate for my 1060) but whenever I try to connect to siamining.com I'm getting an error:

Code:

 SC: Stratum - connecting to 'us-east.siamining.com' <45.79.159.167> port 7777
 SC: Stratum - Connected (us-east.siamining.com:7777)
 SC: Authorization failed
: {"id":2,"error":null,"result":false}
Stratum - reading socket failed, disconnect
 SC: Job timeout, disconnect, retry in 20 sec...
GPU0 t=65C fan=60%

Here's my 1bash config:

Code:
SC_WORKER="nv$IP_AS_WORKER"
SC_ADDRESS="c4fa3fa4acf1a317752204d730888c755367d8e81092a944f6727d06251f1fd1a752576afac6"
SC_POOL="us-east.siamining.com:7777"
SC_GW_POOL="us-east.siamining.com:9980"

I'm using port 7777 to reach siamining.com on a dual mining claymore config on Windows 10 with no problem.  It's not clear to me what I should be setting the SC_GW_POOL value to.  Any insight there?

Thanks!
lost_post
Newbie
*
Offline Offline

Activity: 13


View Profile
July 15, 2017, 10:50:29 AM
 #1885

Hello. Here is my code to send email when somethings happens:
Quote
EMAIL_TEXT=$1 # take argument and put it to $EMAIL_TEXT

source /media/m1/1263-A96E/wallets # from this file we take $ADMAIL_EMAIL

source /media/m1/1263-A96E/settings.sh # from this file we take $RIG_EMAIL, $WORKER_NAME, $RIG_EMAIL_PASS, $RIG_SMTP

# to install mail tool use ($ apt-get install libio-socket-ssl-perl libnet-ssleay-perl sendemail)
# to send email use command ($ ./mail.sh X) where X is N of text message.

case $EMAIL_TEXT in
     0)
     SUBJECT="Starting $WORKER_NAME"
     TEXT="System was started just now!"
          ;;
     1)
     SUBJECT="Starting $WORKER_NAME"
     TEXT="GPU Miner was started just now & gotty for gpu is starting now!"
          ;;
     2)
     SUBJECT="Starting $WORKER_NAME"
     TEXT="CPU Miner was started just now & gotty for cpu is starting now!"
          ;;
     3)
     SUBJECT="Restaring $WORKER_NAME"
     TEXT="GPU miner was crushed and restarting now"
          ;;
     *)
     SUBJECT="Error $WORKER_NAME"
     TEXT="Error with subject!"
          ;;
esac

sendemail -f $RIG_EMAIL -t $ADMIN_EMAIL -u $SUBJECT -m "$TEXT" -s $RIG_SMTP -o tls=yes -xu $RIG_EMAIL -xp $RIG_EMAIL_PASS &

I use this to send email when starting miner, rebooting, and so on. You can put command anywhere and use it any times. Change  or add SUBJECT, TEXT and go on.

fullzero, I fully support the ideas of open and consolidated software. Naturally, all my additions are free. Later, I will post your v0018 with my changes about which I spoke earlier. (Now I am rewriting form v17 to v18). I will try to make them modular. When the options are turned on, additional packages will be install, and if the options are disabled, they will not install.
If you like some of my options, you can add them to nvOC.

I'm using apache for the web server and gotty to display "screen -x miner" on this web server.
I like this decision more than the RDP. You do not need a client application to view the state of the miner.
 
snailbrain
Legendary
*
Offline Offline

Activity: 1456



View Profile
July 15, 2017, 12:16:47 PM
 #1886

just a quick one

Quote
ASUS PRIME Z270-A (7x gpu: 9x if you use 2x m2 adapters) Link

does not work with 9 GPUs even though it has 2x m2 slots

unless someone knows some magical trick?

██████████████████            ██████████
████████████████              ██████████
██████████████          ▄█   ███████████
████████████         ▄████   ███████████
██████████        ▄███████  ████████████
████████        ▄█████████  ████████████
██████        ▄███████████  ████████████
████       ▄██████████████ █████████████
██      ▄███████████████████████████████
▀        ███████████████████████████████
▄          █████████████████████████████
██▄         ▀███████████████████████████
████▄        ▀██████████████████████████
██████▄        ▀████████████████████████
████████▄        ████████████████▀ █████
██████████▄       ▀█████████████  ██████
████████████▄       ██████████   ███████
██████████████▄      ▀██████    ████████
████████████████▄▄     ███     █████████
███████████████████▄    ▀     ██████████
█████████████████████▄       ███████████
███████████████████████▄   ▄████████████





▄█████████████████   ███             ███   ███   ███▄                ▄███            █████            ████████████████   ████████████████▄             █████
███▀                 ███             ███   ███   ████▄              ▄████           ███████           ███                ███           ▀███           ███████
███                  ███             ███   ███   █████▄            ▄█████          ███▀ ▀███          ███                ███            ███          ███▀ ▀███
███                  ███             ███   ███   ███ ███▄        ▄███ ███        ▄███▀   ▀███▄        ███                ███           ▄███        ▄███▀   ▀███▄
███                  ███████████████████   ███   ███  ▀██▄      ▄██▀  ███       ▄███▀     ▀███▄       ████████████████   ████████████████▀        ▄███▀     ▀███▄
███                  ███             ███   ███   ███   ▀███    ███▀   ███      ▄███▀       ▀███▄      ███                ███        ███          ▄███▀       ▀███▄
███                  ███             ███   ███   ███    ▀███  ███▀    ███     ▄███▀         ▀███▄     ███                ███         ███        ▄███▀         ▀███▄
███▄                 ███             ███   ███   ███      ██████      ███    ▄███             ███▄    ███                ███          ███      ▄███             ███▄
▀█████████████████   ███             ███   ███   ███       ████       ███   ▄███               ███▄   ████████████████   ███           ███    ▄███               ███▄

|
  TRUE BLOCKCHAIN GAMING PLATFORM 
DECENTRALISED AUTONOMOUS UNIVERSES

  HOME PAGE                                                                  WHITE PAPER 
|
lost_post
Newbie
*
Offline Offline

Activity: 13


View Profile
July 15, 2017, 02:05:32 PM
 #1887

All once again good afternoon!
Here is a link to my revision of the nvOC v18.  https://drive.google.com/file/d/0B8OLYcDXEG6rcGlndVc5RDhpbFU/view?usp=sharing

I added:
1. email alarms (sendemail),
2. webUI for monitoring (apache2 + go + gotty), 
# All needed apts will install in first boot if $GOTTY="YES" || $EMAIL="YES". in settings.sh
3. auto update pasteBin and restart miner if something changes.
# you need to run crontab -e and add "*/5 * * * * ~/update_wallets.sh" . To check update every 5 minutes.


Completed / redone:
1. Option to set all Target temps and PowerLimits in two strings while using autoFANS
2. add specific PL and CLOCK for some coins
3. output nvidia-smi to screen every 30 sec when check fans, even if the fans are in manual mode. (to see temps, RPMs, memory in gotty, or via SSH, or via local quake)
4. Manual setting WORKER_NAME to use with pools. In settings.sh . If don't set using nvXXX (last digs of ip)
5. WORKER_NAME is hostname of rig, for more useful network search.

I divided the code into several files (start, miner, overclock, e-mail, fans). Settings rendered in 3 separate files:
settings.sh - constant machine settings
gpus_settings.sh - constant settings of video cards
wallets - settings of wallets, miners, machine settings variables.
Unfortunately, I have not yet had a chance to check how it works on the v18, but on v17 all is good. I think I can check in the next couple of days.

All the files are added to the folders as in the archive. Your need to change autostart from "gnome-terminal" to "~/start" (sudo nano ~/.config/autostart/webmob.desktop )
Settings are given in three files in the mnt sub folder. settings, gpus_settings, wallets

I would be happy if someone at least a small part of my work is useful.

fullzero and other developers: I ask for applications for deleted comments and descriptions, maybe even in some places copyright. While working on the code - some parts were in the way.

Of course, I could forget or confuse something, but I seem to remember everything and wrote.
VoskCoin
Full Member
***
Offline Offline

Activity: 224


YouTube.com/VoskCoin


View Profile WWW
July 15, 2017, 03:19:16 PM
 #1888

How exactly do I utilize

The new watchdog function?

Auto reboot?

And can I remote in?

Check out my Crypto YouTube channel
https://www.youtube.com/VoskCoin
If you enjoy my content click Subscribe
fk1
Full Member
***
Offline Offline

Activity: 135


View Profile
July 15, 2017, 04:12:53 PM
 #1889

I tried v0018 today but with no success: whenever I finished flashing my usb stick with etcher I can't unmount the device from windows anymore. When I plug it out without unmounting, it boots up but after a while my ssh session disconnects and it seems to hang.

v0017 worked fine, where can I redownload it?
Nexillus
Full Member
***
Offline Offline

Activity: 132


View Profile
July 15, 2017, 04:17:27 PM
 #1890

Fullzero, IAmNotAJeep or Maxximus007,

Have a question on the watchdog script. I noticed it has triggered twice in the last 24 hours but not sure why as it seems there is not much information within the logs to try to troubleshoot.

The one I am getting is: utilization is too low; reviving did not work so restarting system in 10 seconds. With the restart knocks the miner out for about 20 minutes. I am trying to figure out what is going on and only started having this happen when I went to VER18. I changed the utilization under the script to 80 instead of 90 today to see if that helps.

I appreciate any help or insight into the possible problem, as with the restarts wipes out the other logs.

Bitrated user: nexillus.
argonaute
Jr. Member
*
Offline Offline

Activity: 48


View Profile
July 15, 2017, 04:53:27 PM
 #1891

Fullzero, IAmNotAJeep or Maxximus007,

Have a question on the watchdog script. I noticed it has triggered twice in the last 24 hours but not sure why as it seems there is not much information within the logs to try to troubleshoot.

The one I am getting is: utilization is too low; reviving did not work so restarting system in 10 seconds. With the restart knocks the miner out for about 20 minutes. I am trying to figure out what is going on and only started having this happen when I went to VER18. I changed the utilization under the script to 80 instead of 90 today to see if that helps.

I appreciate any help or insight into the possible problem, as with the restarts wipes out the other logs.

60 x 12 = 720 mns Smiley

the description is wrong in the 1bash file
Nexillus
Full Member
***
Offline Offline

Activity: 132


View Profile
July 15, 2017, 05:03:15 PM
 #1892

Fullzero, IAmNotAJeep or Maxximus007,

Have a question on the watchdog script. I noticed it has triggered twice in the last 24 hours but not sure why as it seems there is not much information within the logs to try to troubleshoot.

The one I am getting is: utilization is too low; reviving did not work so restarting system in 10 seconds. With the restart knocks the miner out for about 20 minutes. I am trying to figure out what is going on and only started having this happen when I went to VER18. I changed the utilization under the script to 80 instead of 90 today to see if that helps.

I appreciate any help or insight into the possible problem, as with the restarts wipes out the other logs.

60 x 12 = 720 mns Smiley

the description is wrong in the 1bash file

I did catch that and changed it to 3600 minutes or 2.5 days Smiley

Thank you though!

Bitrated user: nexillus.
fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
July 15, 2017, 05:34:48 PM
 #1893

Quick question that I'm sure many of you have solved various ways.  Any thoughts on the safest way to power the 7th GPU(1070)/riser with an EVGA 1300 G2?  Custom adapter cable? Molex to 6+2?  Two of the VGA cables have a split connection from the PSU, but I didn't want to connect two cards and two risers split twice from the same cable. 

Thanks for any quick thoughts.

There are dual molex to pcie 6+2 adapters; if you use both molex cables 2 different molex cables(from the psu each from a different molex port) into one adapter it should be able to handle 160 watts.  I would keep it below 135 if you use this method.


Thanks for the reply, fullzero.  I had to do something a little more taxing due to a bad riser.  One of my risers is molex and I'm currently feeding that directly from the PSU with no desire to use a SATA adapter. 

Is the following a terrible shorterm solution (until I can get another working 6 pin riser)?


                                       MOLEX Riser (Zotac 1070 powered from VGA on card)
                        MOLEX <   MOLEX to 6 PIN adapter
PSU (1300 G2) <                                                    > 6 PIN Y to dual 6+2 > 6 PIN Riser + Zotac 1070
                        MOLEX <   MOLEX to 6 PIN adapter


Two molex from the PSU.  One feeds a molex riser with a 1070 in that riser (powered from VGA on the card) as well as one half of the dual molex to 6 pin adapter.  The other half is fed clean from the PSU.  All cards are at 125 PL.  It's currently running but I'd like a second opinion.


I'm not sure how much power the the 1070s pull from the pcie slot; but with a 125 pl I think this setup should be ok.


fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
July 15, 2017, 05:36:47 PM
 #1894

I have tried to compile the newest ccminer for gtx 1060 for ages now, I cannot get it to work. This happens every time I try to compile.

akefile:1728: recipe for target 'ccminer-bignum.o' failed
make[2]: *** [ccminer-bignum.o] Error 1
make[2]: *** Waiting for unfinished jobs....
mv -f .deps/ccminer-api.Tpo .deps/ccminer-api.Po
mv -f .deps/ccminer-util.Tpo .deps/ccminer-util.Po
mv -f .deps/ccminer-ccminer.Tpo .deps/ccminer-ccminer.Po
make[2]: Leaving directory '/home/m1/ccminer'
Makefile:2028: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/m1/ccminer'
Makefile:629: recipe for target 'all' failed
make: *** [all] Error 2


It is probably too difficult for non CS to compile ccminer; the current devs of each fork should really make an updated guide / mitigate some of the problems encountered when compiling.

Give me a link to the version / fork of ccminer you want to use and I will compile it optimized for 1060s.

I sent you a pm earlier on the miner to compile but I have found a faster one for chc, https://github.com/alexis78/ccminer.git

I will have to check; but I am reasonably sure the version of alexis I have with nvOC is the newest linux branch (the linux branch is extremely far behind the windows) not sure what is going on there.

fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
July 15, 2017, 05:40:50 PM
 #1895

Guys, I've been playing with the Power Limit, and don't quite understand something: by default my cards draw 180W each, but I could enforce a 125W limit without affecting the hash rate, and stable (keeping the OC settings I use). How is that possible? I'm only mining ETH with Genoil at the moment; since it mostly use the memory, I guess a underutilized GPU processor could allow that. If that's the case, dual-mining would need a higher limit, right? What would be the symptoms of needing to raise the power limit?

Core uses at lot more power than memory; so memory intensive algos like Ethash use less power.

When Dualmining you will need to increase the powerlimit.

If you don't; or fail to increase it enough: your rig will have lots of soft and hard crashes.

fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
July 15, 2017, 06:14:46 PM
 #1896

All,

Was working great in 16 but having issues dual mining ETC and SC with Claymore in 18.  Got ETC working and working WELL (yay higher hashrate for my 1060) but whenever I try to connect to siamining.com I'm getting an error:

Code:

 SC: Stratum - connecting to 'us-east.siamining.com' <45.79.159.167> port 7777
 SC: Stratum - Connected (us-east.siamining.com:7777)
 SC: Authorization failed
: {"id":2,"error":null,"result":false}
Stratum - reading socket failed, disconnect
 SC: Job timeout, disconnect, retry in 20 sec...
GPU0 t=65C fan=60%

Here's my 1bash config:

Code:
SC_WORKER="nv$IP_AS_WORKER"
SC_ADDRESS="c4fa3fa4acf1a317752204d730888c755367d8e81092a944f6727d06251f1fd1a752576afac6"
SC_POOL="us-east.siamining.com:7777"
SC_GW_POOL="us-east.siamining.com:9980"

I'm using port 7777 to reach siamining.com on a dual mining claymore config on Windows 10 with no problem.  It's not clear to me what I should be setting the SC_GW_POOL value to.  Any insight there?

Thanks!

this pool uses the syntax:

-dpool stratum+tcp://us-east.siamining.com:7777 -dwal YourSiacoinAddress.YourWorkerName -dcoin sc

on or near line 2764:
Code:
SCADDR="$SC_ADDRESS/$SC_WORKER"

need to be changed to

Code:
SCADDR="$SC_ADDRESS.$SC_WORKER"

for this pool.

for the next 1bash; I will make a YES/NO switch to make this easier to change in the future.

Let me know if this solves the problem.

fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
July 15, 2017, 06:17:16 PM
 #1897

just a quick one

Quote
ASUS PRIME Z270-A (7x gpu: 9x if you use 2x m2 adapters) Link

does not work with 9 GPUs even though it has 2x m2 slots

unless someone knows some magical trick?

Did you change the bios settings as directed by the OP?


If you are using an ASUS PRIME Z270-A;

ensure 'Above 4G Decoding' is enabled in the bios.
 

Also ensure PTP aware OS: is set to 'Not PTP Aware' in the bios. 

Finally, ensure you 'Clear Secure Boot Keys' in the bios.

fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
July 15, 2017, 06:26:56 PM
 #1898

I tried v0018 today but with no success: whenever I finished flashing my usb stick with etcher I can't unmount the device from windows anymore. When I plug it out without unmounting, it boots up but after a while my ssh session disconnects and it seems to hang.

v0017 worked fine, where can I redownload it?

Were you imaging an SSD or HDD with etcher when it didn't let you eject?  If so that is expected. 

Anytime you cannot properly eject an imaged drive; shutdown the build pc and remove it after shutdown is complete.

SALFTER_NICEHASH_PROFIT_SWITCHING

and

IAmNotAJeep_and_Maxximus007_WATCHDOG

will intermittently kill your screen in their normal operation.

If you set both to "NO" and:

Code:
LOCALorREMOTE="REMOTE"

you should be able to have an uninterrupted SSH screen connection similar to v0017

When using PROFIT_SWITCHING and or WATCHDOG if your screen was killed you can connect to the regenerated one with the cmd:

Code:
screen -r miner

Also I have noticed a problem when using both PROFIT_SWITCHING and or WATCHDOG together; I will make changes to the next 1bash to fix it.




idle_shell
Newbie
*
Offline Offline

Activity: 6


View Profile
July 15, 2017, 06:29:05 PM
 #1899

All,

Was working great in 16 but having issues dual mining ETC and SC with Claymore in 18.  Got ETC working and working WELL (yay higher hashrate for my 1060) but whenever I try to connect to siamining.com I'm getting an error:

Code:

 SC: Stratum - connecting to 'us-east.siamining.com' <45.79.159.167> port 7777
 SC: Stratum - Connected (us-east.siamining.com:7777)
 SC: Authorization failed
: {"id":2,"error":null,"result":false}
Stratum - reading socket failed, disconnect
 SC: Job timeout, disconnect, retry in 20 sec...
GPU0 t=65C fan=60%

Here's my 1bash config:

Code:
SC_WORKER="nv$IP_AS_WORKER"
SC_ADDRESS="c4fa3fa4acf1a317752204d730888c755367d8e81092a944f6727d06251f1fd1a752576afac6"
SC_POOL="us-east.siamining.com:7777"
SC_GW_POOL="us-east.siamining.com:9980"

I'm using port 7777 to reach siamining.com on a dual mining claymore config on Windows 10 with no problem.  It's not clear to me what I should be setting the SC_GW_POOL value to.  Any insight there?

Thanks!

this pool uses the syntax:

-dpool stratum+tcp://us-east.siamining.com:7777 -dwal YourSiacoinAddress.YourWorkerName -dcoin sc

on or near line 2764:
Code:
SCADDR="$SC_ADDRESS/$SC_WORKER"

need to be changed to

Code:
SCADDR="$SC_ADDRESS.$SC_WORKER"

for this pool.

for the next 1bash; I will make a YES/NO switch to make this easier to change in the future.

Let me know if this solves the problem.

That did the job.  A switch would be awesome but even just a comment somewhere relevant in the config would be a good pointer.
fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
July 15, 2017, 06:30:47 PM
 #1900

Fullzero, IAmNotAJeep or Maxximus007,

Have a question on the watchdog script. I noticed it has triggered twice in the last 24 hours but not sure why as it seems there is not much information within the logs to try to troubleshoot.

The one I am getting is: utilization is too low; reviving did not work so restarting system in 10 seconds. With the restart knocks the miner out for about 20 minutes. I am trying to figure out what is going on and only started having this happen when I went to VER18. I changed the utilization under the script to 80 instead of 90 today to see if that helps.

I appreciate any help or insight into the possible problem, as with the restarts wipes out the other logs.

60 x 12 = 720 mns Smiley

the description is wrong in the 1bash file

I did catch that and changed it to 3600 minutes or 2.5 days Smiley

Thank you though!

Code:
AUTO_REBOOT="NO"

REBOOT_TIMEOUT_IN_MINUTES=720   # every 24 hours

the

Code:
REBOOT_TIMEOUT_IN_MINUTES

only applies if
Code:
AUTO_REBOOT="YES"

and yes it is a typo:

I meant to say 'once' every 12 hours

Pages: « 1 ... 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 [95] 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 ... 284 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!