Bitcoin Forum
November 21, 2017, 08:12:27 PM *
News: Latest stable version of Bitcoin Core: 0.15.1  [Torrent].
 
   Home   Help Search Donate Login Register  
Pages: « 1 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 [67] 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 ... 287 »
  Print  
Author Topic: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4  (Read 327121 times)
fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
June 29, 2017, 05:45:45 PM
 #1321

Can I still use custom names for my rigs? Today, I'll be setting up about 20 or so rigs, so I'm needing them to be custom named, will it still work with the paste bin implementation?

EDIT: Also is this Genoil updated with that edited miner that's supposed to have increased hashrates? Also, anyway to have it show GPU temperature?

EDIT2: What's the 1050ti switch for? I do have lots of 1050ti's which I'm planning to add 1 or 2 card along with 1070s rig to use the remaining PSU power limit.

To use _Parallax_ mode with custom names Do this:

for example if I was mining ETH I would add my desired name infront of the dynamic host address portion needed to distinguish individual rigs:

and the workername I wanted to use was:
Code:
myworkername
I would use:

Code:
ETH_WORKER="myworkername_$IP_AS_WORKER"

don't leave a space; this will not work, use a  _  instead

Note: whatever you set as myworkername will be used by all the rigs when using _Parallax_ mode.

Yes; genoil has the new opt.  you can use nvidia-smi in the guake terminal or a second screen to get the temperature.  Not sure if genoil can do this.

Code:
TI="3"

if [ $___1050_or_1050ti == "YES" ]
then
    TI="2"
if [ $NORMAL == "YES" ]
then
    TI="2 3"
fi
fi

this portion is part of the logic needed to only use OC commands for the populated cards, rather than the max possibly supported (14x currently).  1050tis are identified by nvidia-settings as [2] while other cards are [3].





1511295147
Hero Member
*
Offline Offline

Posts: 1511295147

View Profile Personal Message (Offline)

Ignore
1511295147
Reply with quote  #2

1511295147
Report to moderator
1511295147
Hero Member
*
Offline Offline

Posts: 1511295147

View Profile Personal Message (Offline)

Ignore
1511295147
Reply with quote  #2

1511295147
Report to moderator
1511295147
Hero Member
*
Offline Offline

Posts: 1511295147

View Profile Personal Message (Offline)

Ignore
1511295147
Reply with quote  #2

1511295147
Report to moderator
Join ICO Now A blockchain platform for effective freelancing
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1511295147
Hero Member
*
Offline Offline

Posts: 1511295147

View Profile Personal Message (Offline)

Ignore
1511295147
Reply with quote  #2

1511295147
Report to moderator
1511295147
Hero Member
*
Offline Offline

Posts: 1511295147

View Profile Personal Message (Offline)

Ignore
1511295147
Reply with quote  #2

1511295147
Report to moderator
1511295147
Hero Member
*
Offline Offline

Posts: 1511295147

View Profile Personal Message (Offline)

Ignore
1511295147
Reply with quote  #2

1511295147
Report to moderator
fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
June 29, 2017, 05:50:55 PM
 #1322

Excellent work on this package.

Unsure what changed, but I restarted the process a few times and I'm back to 160 Mh/s. Still lower than 180, but better than 90. Still happy to hear if any one has ideas.

I'm having an odd issue and am curious if any one else has seen it.

Earlier this evening, I was getting 150-180 MH/s out of this setup, but the configuration was shutting down every 15-20 minutes. I *believe* it was either a power draw issue, or running out of memory. I've added 4GB more RAM, and I've limited the power limit to 140 watts.

Now, the system is only pushing about 100 MH/s, and the GPUs aren't at 100% utilization (see output at the bottom).

Any one have any idea?

6 x Nividia GTX 1070s, 1200 Watt PSU, STRIX Z270F GAMING, BIOS 0906 03/22/2017

Important settings:

Code:
COIN="ETH"
POWERLIMIT="YES"                 # YES NO
POWERLIMIT_WATTS=140
__CORE_OVERCLOCK=200
MEMORY_OVERCLOCK=600
USE_ENVIRONMENTAL_VARIBLES="YES"   #YES  NO
CLAYMORE_VERSION="9_5"    # choose 9_5  or  9_4  or  8_0
GENOILorCLAYMORE="CLAYMORE"  # choose GENOIL  or  CLAYMORE

Here's the nvidia-smi:
Code:
Thu Jun 29 02:18:16 2017      
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 378.13                 Driver Version: 378.13                    |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070    Off  | 0000:01:00.0      On |                  N/A |
| 75%   57C    P2   142W / 140W |   2365MiB /  8114MiB |     41%      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GTX 1070    Off  | 0000:02:00.0      On |                  N/A |
| 75%   57C    P2   140W / 140W |   2329MiB /  8114MiB |     75%      Default |
+-------------------------------+----------------------+----------------------+
|   2  GeForce GTX 1070    Off  | 0000:04:00.0      On |                  N/A |
| 75%   58C    P2    48W / 140W |   2329MiB /  8114MiB |     64%      Default |
+-------------------------------+----------------------+----------------------+
|   3  GeForce GTX 1070    Off  | 0000:05:00.0      On |                  N/A |
| 75%   48C    P2   139W / 140W |   2329MiB /  8114MiB |     67%      Default |
+-------------------------------+----------------------+----------------------+
|   4  GeForce GTX 1070    Off  | 0000:07:00.0      On |                  N/A |
| 75%   59C    P2    53W / 140W |   2329MiB /  8114MiB |     41%      Default |
+-------------------------------+----------------------+----------------------+
|   5  GeForce GTX 1070    Off  | 0000:08:00.0      On |                  N/A |
| 75%   53C    P2    49W / 140W |   2329MiB /  8114MiB |     54%      Default |
+-------------------------------+----------------------+----------------------+
                                                                              
+-----------------------------------------------------------------------------+
| Processes:                                                       GPU Memory |
|  GPU       PID  Type  Process name                               Usage      |
|=============================================================================|
|    0      1155    G   /usr/lib/xorg/Xorg                              32MiB |
|    0      1852    G   compiz                                          11MiB |
|    0     26958    C   /home/m1/eth/9_5/ethdcrminer64                2213MiB |
|    1      1155    G   /usr/lib/xorg/Xorg                               7MiB |
|    1     26958    C   /home/m1/eth/9_5/ethdcrminer64                2213MiB |
|    2      1155    G   /usr/lib/xorg/Xorg                               7MiB |
|    2     26958    C   /home/m1/eth/9_5/ethdcrminer64                2213MiB |
|    3      1155    G   /usr/lib/xorg/Xorg                               7MiB |
|    3     26958    C   /home/m1/eth/9_5/ethdcrminer64                2213MiB |
|    4      1155    G   /usr/lib/xorg/Xorg                               7MiB |
|    4     26958    C   /home/m1/eth/9_5/ethdcrminer64                2213MiB |
|    5      1155    G   /usr/lib/xorg/Xorg                               7MiB |
|    5     26958    C   /home/m1/eth/9_5/ethdcrminer64                2213MiB |
+-----------------------------------------------------------------------------+


There are a number of things I don't like about your settings.

Try these settings and let me know how they do:

Code:
COIN="ETH"
POWERLIMIT="YES"                 # YES NO
POWERLIMIT_WATTS=115
__CORE_OVERCLOCK=-200
MEMORY_OVERCLOCK=900
MANUAL_FAN="YES"
FAN_SPEED=75
USE_ENVIRONMENTAL_VARIBLES="NO"   #YES  NO
GENOILorCLAYMORE="GENOIL"  # choose GENOIL  or  CLAYMORE



fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
June 29, 2017, 05:52:20 PM
 #1323

Hello,

I'm new on this forum and I just tried your image, looks promising.
I have some weird issues like nvidia-smi missing, I did not read every page of the thread, but the pages I've read do not mention it.

I'm (trying) building a 4x 1060 3gb + 2x 1070 8gb RIG on a MSI Z170A GAMING PRO CARBON.

Here is the std output of the script:

Code:
dos2unix: converting file /media/m1/1263-A96E/oneBash to Unix format ...

workername:

rig IP:


Thu Jun 29 02:52:50 EDT 2017
Action: Removing ...
systemctl stop teamviewerd.service
Failed to stop teamviewerd.service: Unit teamviewerd.service not loaded.
fail

kill '/opt/teamviewer/tv_bin/script/teamviewer' - root (/home/m1/.local/share/teamviewer12 / /home/m1/.local/share/teamviewer12)



Failed to execute operation: No such file or directory
try again, full path...
Failed to execute operation: Invalid argument

/media/m1/1263-A96E/oneBash: line 449: nvidia-smi: command not found
/media/m1/1263-A96E/oneBash: line 483: nvidia-smi: command not found

ERROR: Error querying enabled displays on GPU 0 (Missing Extension).


ERROR: Error querying connected displays on GPU 0 (Missing Extension).



ERROR: Error resolving target specification 'gpu:0' (No targets match target specification), specified in assignment
       '[gpu:0]/GPUGraphicsClockOffset[3]=100'.


ERROR: Error querying enabled displays on GPU 0 (Missing Extension).


ERROR: Error querying connected displays on GPU 0 (Missing Extension).



ERROR: Error resolving target specification 'gpu:0' (No targets match target specification), specified in assignment
       '[gpu:0]/GPUMemoryTransferRateOffset[3]=100'.

/media/m1/1263-A96E/oneBash: line 540: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 546: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 554: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 564: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 576: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 590: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 606: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 624: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 644: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 666: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 690: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 716: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 744: [: ==: unary operator expected

ERROR: Error querying enabled displays on GPU 0 (Missing Extension).


ERROR: Error querying connected displays on GPU 0 (Missing Extension).



ERROR: Error resolving target specification 'gpu:0' (No targets match target specification), specified in assignment
       '[gpu:0]/GPUFanControlState=1'.


ERROR: Error querying enabled displays on GPU 0 (Missing Extension).


ERROR: Error querying connected displays on GPU 0 (Missing Extension).



ERROR: Error resolving target specification 'fan:0' (No targets match target specification), specified in assignment
       '[fan:0]/GPUTargetFanSpeed=75'.

/media/m1/1263-A96E/oneBash: line 785: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 791: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 799: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 809: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 821: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 835: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 851: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 869: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 889: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 911: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 935: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 961: [: ==: unary operator expected
/media/m1/1263-A96E/oneBash: line 989: [: ==: unary operator expected
/home/m1/eth/9_5/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/eth/9_5/ethdcrminer64)

����������������������������������������������������������������ͻ
�      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.5      �
����������������������������������������������������������������ͼ

ETH: 1 pool is specified
Main Ethereum pool is eth-eu2.nanopool.org:9999
SC: 1 pool is specified
Main Siacoin pool is sia-us-east1.nanopool.org:7777
AMD OpenCL platform not found
No NVIDIA CUDA GPUs detected.
No AMD OPENCL or NVIDIA CUDA GPUs found, exit
FAILURE; reinit in 5

Thank you for your work,


If you are connecting a monitor directly to the motherboard (don't do this); only connect a monitor the the primary GPU (the one in the 16x slot closest to the CPU).

First I would try reimaging the USB key.

then if it still isnt working:

press f12 and enter:

Code:
lspci | grep VGA

then

Code:
nvidia-smi

and tell me what it outputs.

fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
June 29, 2017, 05:54:21 PM
 #1324

Hello everyone, just setup my rig yesterday with current version 17. Thanks by the way.. ran fine for a few hours then all a sudden, the power went from 225 down to 8 and the sols stopped. Attempted to restart the Bash file and I get error code 77. Tried to reboot sudo reboot. And same issue does not want to start up again. Any idea on what this can be? I have 2 1080ti cards and a msi z270-a pro board using adata USB 3.0. Thank you.

You are the second member who has had a problem using an adata USB key.


I would try reimaging the USB key.

If you have a different brand USB key; I would use it instead.

fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
June 29, 2017, 05:56:55 PM
 #1325

Clock speeds not working on second card.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:0]) assigned value 100.


  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:0]) assigned value 350.

Where is gpu:1 ?

My oneBash -

INDIVIDUAL_CLOCKS="YES"         # YES NO
 
# Set individual clocks here if INDIVIDUAL_CLOCKS="YES"
__CORE_OVERCLOCK_0=100
MEMORY_OVERCLOCK_0=350
 
__CORE_OVERCLOCK_1=100
MEMORY_OVERCLOCK_1=800

Thought maybe my USB was too slow so I changed oneBash to "slow" usb.
Same thing is happening. Clocks only getting set on GPU:0

Can't set fan manually at all.

Anyone have any ideas here?

Had this once and it was a bad image on the USB. Just re-flashed and was fixed. Was kinda weird but hasn't happened since.

You are not the first member to report this happening:  if you still have this image which produces this one GPU not setting its fan: please make these changes to oneBash and let me know what happens.

in the implementation section most likely line 483:

Code:
GPUS=$(nvidia-smi --query-gpu=count --format=csv,noheader,nounits | tail -1)

change this to:
Code:
GPUS=14

save, restart the mining process

If the problem is an indexing error: then the second GPU should have its fan properly set: however if you are using 2 GPUs; you should also see error messages for each cmd for 12 GPUs that you don't have.

If the second GPU does set the fans properly note its index number.

Let me know the result; and hopefully it will only take a new oneBash to fix this.


I made the change and here is my result. GPU:1 clocks still not setting

dos2unix: converting file /media/m1/1263-A96E/oneBash to Unix format ...

workername: 136

rig IP: 10.0.0.136
Power limit for GPU 0000:04:00.0 was set to 125.00 W from 125.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 0000:22:00.0 was set to 125.00 W from 125.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found
No devices were found


Wed Jun 28 16:48:42 EDT 2017
Action: Installing daemon (12.0.76279) for 'systemd' ...
installing /etc/systemd/system/teamviewerd.service (/opt/teamviewer/tv_bin/script/teamviewerd.service)
Try: systemctl enable teamviewerd.service
systemctl start teamviewerd.service


  Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:0]) assigned value 100.


  Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:0]) assigned value 350.







ERROR: Error resolving target specification 'gpu:2' (No targets match target specification), specified in assignment
       '[gpu:2]/GPUGraphicsClockOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:2' (No targets match target specification), specified in assignment
       '[gpu:2]/GPUMemoryTransferRateOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:3' (No targets match target specification), specified in assignment
       '[gpu:3]/GPUGraphicsClockOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:3' (No targets match target specification), specified in assignment
       '[gpu:3]/GPUMemoryTransferRateOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:4' (No targets match target specification), specified in assignment
       '[gpu:4]/GPUGraphicsClockOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:4' (No targets match target specification), specified in assignment
       '[gpu:4]/GPUMemoryTransferRateOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:5' (No targets match target specification), specified in assignment
       '[gpu:5]/GPUGraphicsClockOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:5' (No targets match target specification), specified in assignment
       '[gpu:5]/GPUMemoryTransferRateOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:6' (No targets match target specification), specified in assignment
       '[gpu:6]/GPUGraphicsClockOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:6' (No targets match target specification), specified in assignment
       '[gpu:6]/GPUMemoryTransferRateOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:7' (No targets match target specification), specified in assignment
       '[gpu:7]/GPUGraphicsClockOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:7' (No targets match target specification), specified in assignment
       '[gpu:7]/GPUMemoryTransferRateOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:8' (No targets match target specification), specified in assignment
       '[gpu:8]/GPUGraphicsClockOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:8' (No targets match target specification), specified in assignment
       '[gpu:8]/GPUMemoryTransferRateOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:9' (No targets match target specification), specified in assignment
       '[gpu:9]/GPUGraphicsClockOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:9' (No targets match target specification), specified in assignment
       '[gpu:9]/GPUMemoryTransferRateOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:10' (No targets match target specification), specified in assignment
       '[gpu:10]/GPUGraphicsClockOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:10' (No targets match target specification), specified in assignment
       '[gpu:10]/GPUMemoryTransferRateOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:11' (No targets match target specification), specified in assignment
       '[gpu:11]/GPUGraphicsClockOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:11' (No targets match target specification), specified in assignment
       '[gpu:11]/GPUMemoryTransferRateOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:12' (No targets match target specification), specified in assignment
       '[gpu:12]/GPUGraphicsClockOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:12' (No targets match target specification), specified in assignment
       '[gpu:12]/GPUMemoryTransferRateOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:13' (No targets match target specification), specified in assignment
       '[gpu:13]/GPUGraphicsClockOffset[3]=100'.



ERROR: Error resolving target specification 'gpu:13' (No targets match target specification), specified in assignment
       '[gpu:13]/GPUMemoryTransferRateOffset[3]=100'.


  Attribute 'GPUFanControlState' (m1-desktop:0[gpu:0]) assigned value 0.





ERROR: Error resolving target specification 'gpu:2' (No targets match target specification), specified in assignment
       '[gpu:2]/GPUFanControlState=0'.



ERROR: Error resolving target specification 'gpu:3' (No targets match target specification), specified in assignment
       '[gpu:3]/GPUFanControlState=0'.



ERROR: Error resolving target specification 'gpu:4' (No targets match target specification), specified in assignment
       '[gpu:4]/GPUFanControlState=0'.



ERROR: Error resolving target specification 'gpu:5' (No targets match target specification), specified in assignment
       '[gpu:5]/GPUFanControlState=0'.



ERROR: Error resolving target specification 'gpu:6' (No targets match target specification), specified in assignment
       '[gpu:6]/GPUFanControlState=0'.



ERROR: Error resolving target specification 'gpu:7' (No targets match target specification), specified in assignment
       '[gpu:7]/GPUFanControlState=0'.



ERROR: Error resolving target specification 'gpu:8' (No targets match target specification), specified in assignment
       '[gpu:8]/GPUFanControlState=0'.



ERROR: Error resolving target specification 'gpu:9' (No targets match target specification), specified in assignment
       '[gpu:9]/GPUFanControlState=0'.



ERROR: Error resolving target specification 'gpu:10' (No targets match target specification), specified in assignment
       '[gpu:10]/GPUFanControlState=0'.



ERROR: Error resolving target specification 'gpu:11' (No targets match target specification), specified in assignment
       '[gpu:11]/GPUFanControlState=0'.



ERROR: Error resolving target specification 'gpu:12' (No targets match target specification), specified in assignment
       '[gpu:12]/GPUFanControlState=0'.



ERROR: Error resolving target specification 'gpu:13' (No targets match target specification), specified in assignment
       '[gpu:13]/GPUFanControlState=0'.


Looks like the problem is with crazy indexing; not sure how that is happening with 2 GPUs.

Try this:

open the guake terminal (f12) and enter:
Code:
gksu gedit '/etc/X11/xorg.conf'

then select all with
Code:
ctrl + a


and delete; then:

copy this code and paste it into the xorg.conf:

Code:
Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 1920 0
    Screen      1  "Screen1" 3840 0
    Screen      2  "Screen2" 5760 0
    Screen      3  "Screen3" 7680 0
    Screen      4  "Screen4" 9600 0
    Screen      5  "Screen5" 11520 0
    Screen      6  "Screen6" 13440 0
    Screen      7  "Screen7" 15360 0
    Screen      8  "Screen8" 17280 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor3"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor4"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor5"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor6"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor7"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor8"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection


Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:01:00:0"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:02:00:0"
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:03:00:0"
EndSection

Section "Device"
    Identifier     "Device3"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:04:00:0"
EndSection

Section "Device"
    Identifier     "Device4"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:22:00:0"
EndSection

Section "Device"
    Identifier     "Device5"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:06:00:0"
EndSection

Section "Device"
    Identifier     "Device6"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:07:00:0"
EndSection

Section "Device"
    Identifier     "Device7"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:08:00:0"
EndSection

Section "Device"
    Identifier     "Device8"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:09:00:0"
EndSection


Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen3"
    Device         "Device3"
    Monitor        "Monitor3"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen4"
    Device         "Device4"
    Monitor        "Monitor4"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen5"
    Device         "Device5"
    Monitor        "Monitor5"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen6"
    Device         "Device6"
    Monitor        "Monitor6"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen7"
    Device         "Device7"
    Monitor        "Monitor7"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen8"
    Device         "Device8"
    Monitor        "Monitor8"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 1920 0
    Screen      1  "Screen1" 3840 0
    Screen      2  "Screen2" 5760 0
    Screen      3  "Screen3" 7680 0
    Screen      4  "Screen4" 9600 0
    Screen      5  "Screen5" 11520 0
    Screen      6  "Screen6" 13440 0
    Screen      7  "Screen7" 15360 0
    Screen      8  "Screen8" 17280 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor3"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor4"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor5"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor6"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor7"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor8"
    VendorName     "Unknown"
    ModelName      "CLB  fit Headless"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection


Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:01:00:0"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:02:00:0"
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:03:00:0"
EndSection

Section "Device"
    Identifier     "Device3"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:04:00:0"
EndSection

Section "Device"
    Identifier     "Device4"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:22:00:0"
EndSection

Section "Device"
    Identifier     "Device5"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:06:00:0"
EndSection

Section "Device"
    Identifier     "Device6"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:07:00:0"
EndSection

Section "Device"
    Identifier     "Device7"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:08:00:0"
EndSection

Section "Device"
    Identifier     "Device8"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1050 Ti"
    BusID          "PCI:09:00:0"
EndSection


Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen3"
    Device         "Device3"
    Monitor        "Monitor3"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen4"
    Device         "Device4"
    Monitor        "Monitor4"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen5"
    Device         "Device5"
    Monitor        "Monitor5"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen6"
    Device         "Device6"
    Monitor        "Monitor6"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen7"
    Device         "Device7"
    Monitor        "Monitor7"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen8"
    Device         "Device8"
    Monitor        "Monitor8"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "31"
    Option         "nvidiaXineramaInfoOrder" "DFP-3"
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Then save

Logout

login

Tell me if this works

No this did not work. All it did was make my TeamViewer window very tiny lol.
I guess this is a MoBo issue and not a nvOC issue. Thank you for attempting to fix it.
My MoBo is a Dell T5500. Guess I got what I paid for (cheap).


I think a system value may have changed based on physical changes you made to the rig after giving me the output, but before I made a different xorg.conf.

press f12 and enter:

Code:
lspci | grep VGA

then

Code:
nvidia-smi

and tell me what it outputs + don't change the physical configuration / build usb.


jmooney5115
Jr. Member
*
Offline Offline

Activity: 37


View Profile
June 29, 2017, 06:53:44 PM
 #1326

I never could get my EVGA 1070 SC to OC. Is there a trick to this? I've tried every combination of OC posted here over the past 2 weeks and the speed never changed.

First I would try reimaging the USB key.

then if it still isnt working:

press f12 and enter:

Code:
lspci | grep VGA

then

Code:
nvidia-smi
and tell me what it outputs.

Also if you are connecting a monitor directly to the motherboard (don't do this); only connect a monitor the the primary GPU (the one in the 16x slot closest to the CPU).




Thanks for your reply! It didn't work because I didn't have my monitor plugged in correctly. Is there any way to view the memory manufacturer within Linux?

These commands were ran while EWFB miner was running with default clocks.

lspci | grep VGA
Code:
m1@m1-desktop:~$ lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)


nvidia-smi
Code:
m1@m1-desktop:~$ nvidia-smi
Thu Jun 29 14:10:31 2017
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 378.13                 Driver Version: 378.13                    |
|-------------------------------+----------------------+----------------------+
| GPU  Name          Persistence-M| Bus-Id           Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070       Off  | 0000:01:00.0       On |                     N/A |
| 75%   62C    P2   141W / 151W |    746MiB /  8110MiB |     97%      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GTX 1070       Off  | 0000:02:00.0      Off |                      N/A |
| 75%   60C    P2   145W / 151W |    612MiB /  8114MiB |     99%      Default |
+-------------------------------+----------------------+----------------------+
|   2  GeForce GTX 1070       Off  | 0000:04:00.0      Off |                      N/A |
| 75%   62C    P2   145W / 151W |    612MiB /  8114MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   3  GeForce GTX 1070       Off  | 0000:05:00.0      Off |                      N/A |
| 75%   54C    P2   145W / 151W |    612MiB /  8114MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   4  GeForce GTX 1070       Off  | 0000:06:00.0      Off |                      N/A |
| 75%   48C    P2   145W / 151W |    612MiB /  8114MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   5  GeForce GTX 1070       Off  | 0000:09:00.0      Off |                      N/A |
| 75%   57C    P2   147W / 151W |    612MiB /  8114MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+
| Processes:                                                           GPU Memory |
|  GPU       PID  Type  Process name                               Usage      |
|=============================================================================|
|    0      1127    G   /usr/lib/xorg/Xorg                                    111MiB |
|    0      1821    G   compiz                                                     30MiB |
|    0     16326    C   /home/m1/zec/v3_4/miner                        593MiB |
|    1      1127    G   /usr/lib/xorg/Xorg                                       7MiB |
|    1     16326    C   /home/m1/zec/v3_4/miner                        593MiB |
|    2      1127    G   /usr/lib/xorg/Xorg                                        7MiB |
|    2     16326    C   /home/m1/zec/v3_4/miner                        593MiB |
|    3      1127    G   /usr/lib/xorg/Xorg                                        7MiB |
|    3     16326    C   /home/m1/zec/v3_4/miner                        593MiB |
|    4      1127    G   /usr/lib/xorg/Xorg                                        7MiB |
|    4     16326    C   /home/m1/zec/v3_4/miner                        593MiB |
|    5      1127    G   /usr/lib/xorg/Xorg                                       7MiB |
|    5     16326    C   /home/m1/zec/v3_4/miner                        593MiB |
+-----------------------------------------------------------------------------+
[/quote]

BTC: 16tbBnNsdxVpwf8ZuUXehv3PG5TEEHn5wV
f00ch0w
Jr. Member
*
Offline Offline

Activity: 33


View Profile
June 29, 2017, 07:10:04 PM
 #1327

So i;m getting gpu stopped working with exiting thread errors on several rigs.

One rig is 6x 1050ti
Other rig is 3x 1060 and 3x 1050ti

Did a test with single rig (the 6x 1050ti one) connected directly to MikroTik instead of D-Link switch, it worked stable for 30 mins while it crashed after 15mins on D-Link. Is there any chance that a D-Link switch could be causing GPUs to crash (I don't see a reason how are those two things connected but still).

Tried both with default clocks and OC, still crashed. Anyone has an idea what could be an issue?
ellyse.bolton
Newbie
*
Offline Offline

Activity: 7


View Profile
June 29, 2017, 07:11:23 PM
 #1328

All gfx cards are out of stock  Embarrassed

have heard AMD and Nvidia coming up with specialized minings cards

When can we expect it to hit stores?
dj--alex
Jr. Member
*
Offline Offline

Activity: 50


View Profile
June 29, 2017, 07:38:53 PM
 #1329

Nvidia cards for CUDA mode autoselect mode 2 
How i can change settings for mode 2 not 3 ?   or better use mode 3?
i get error  R/O attribute

My script

#!/bin/bash
#Включаем оверклокинг on GPU0 
#Enable PowerMizer (Auto) 2 - CUDA mode , most used for mining
nvidia-settings -a '[gpu:0]/GPUPowerMizerMode=3'
#Set GPU Clock offset -50Mhz -
nvidia-settings -a '[gpu:0]/GPUGraphicsClockOffset[3]=-50'
#Set GPU Memory offset +100Mhz -
nvidia-settings -a '[gpu:0]/GPUMemoryTransferRateOffset[3]=140'
#nvidia-settings -a [gpu:0]/GPUFanControlState=1
#nvidia-settings -a [fan:0]/GPUTargetFanSpeed=75

user@PC1 ~ $ ./nvidia-memclock-GPU0.sh

  Attribute 'GPUPowerMizerMode' (PC1:0[gpu:0]) assigned value 2.



ERROR: The attribute 'GPUGraphicsClockOffset' specified in assignment
       '[gpu:0]/GPUGraphicsClockOffset[2]=-50' cannot be assigned (it is a
       read-only attribute).



  Attribute 'GPUMemoryTransferRateOffset' (PC1:0[gpu:0]) assigned value 40.
weareken
Newbie
*
Offline Offline

Activity: 27


View Profile
June 29, 2017, 08:38:45 PM
 #1330

Fullzero, thank you for integrating Genoil and other improvements!

One question - Does the Genoil build incorporate these optimizations?  Seems like people are getting at least 6% performance improvement on GTX 1060's

https://github.com/Genoil/cpp-ethereum/pull/228
Ryu79
Newbie
*
Offline Offline

Activity: 2


View Profile
June 29, 2017, 09:10:13 PM
 #1331

My performance is lower than it is on ethOS or in Windows. I have two 1070s and 4 1060 6GB. On those with no overclock I get around 120MH/s in other OSes. Here with a +300 memory OC I am only getting 105MH/s dual mining eth and sia. I lowered the dcri value to the same number. I didn't set a power limit, maybe that will do it.  

If you scroll to the top of the mining process do you see OC messages for core and memory for each card?

If so:

try +200 core clock and +900 memory clock

if that hard or soft crashes, try:

try +100 core clock and +600 memory clock

also what model 1070s and 1060s?

EVGA superclocked 1070s and gigabyte gaming g1 1060s. Let me try the new settings

edit: looks like it crashed on the original settings with cannot get current temperatures

I may try individual clocks and see if one of the cards is the problem.

I need help with my 6x 1070 rig.. I keep getting the following error and then the miner crashes and restarts..
I didnt overclock it is on default settings..

NVML: cannot get current temperature, error 999 (an internal driver error occurred)
GPU 0, GpuMiner cu_k02 failed 30, unknown error
GPU 0, GpuMiner kx failed 1
GPU 3, GpuMiner kx failed 1
GPU 5, GpuMiner kx failed 1
GPU 4, GpuMiner cu_k02 failed 30, unknown error
GPU 4, GpuMiner kx failed 1
GPU 1, GpuMiner cu_k02 failed 30, unknown error
GPU 1, GpuMiner kx failed 1
NVML: cannot get current temperature, error 999 (an internal driver error occurred)


Any help would be appreciated.. Thanks

Hi,  I know this is an old post but I was wondering if anyone else has encountered this issue and has found a solution.  I have 6 x 1080tis running at stock (msi afterburner not running) and do not get this error anymore but would love to overclock.  As soon as I turn on afterburner, even if I don't overclock,  I get the above error message.  Sometime within 10 minutes, sometimes after days of running fine.  I've also tried overclocking on NVOC and after awhile I get the same error.  Any help would be greatly greatly appreciated and will send some ether for your assistance.  Thanks!!!
Nexillus
Full Member
***
Offline Offline

Activity: 132


View Profile
June 29, 2017, 09:45:45 PM
 #1332

My performance is lower than it is on ethOS or in Windows. I have two 1070s and 4 1060 6GB. On those with no overclock I get around 120MH/s in other OSes. Here with a +300 memory OC I am only getting 105MH/s dual mining eth and sia. I lowered the dcri value to the same number. I didn't set a power limit, maybe that will do it.  

If you scroll to the top of the mining process do you see OC messages for core and memory for each card?

If so:

try +200 core clock and +900 memory clock

if that hard or soft crashes, try:

try +100 core clock and +600 memory clock

also what model 1070s and 1060s?

EVGA superclocked 1070s and gigabyte gaming g1 1060s. Let me try the new settings

edit: looks like it crashed on the original settings with cannot get current temperatures

I may try individual clocks and see if one of the cards is the problem.

I need help with my 6x 1070 rig.. I keep getting the following error and then the miner crashes and restarts..
I didnt overclock it is on default settings..

NVML: cannot get current temperature, error 999 (an internal driver error occurred)
GPU 0, GpuMiner cu_k02 failed 30, unknown error
GPU 0, GpuMiner kx failed 1
GPU 3, GpuMiner kx failed 1
GPU 5, GpuMiner kx failed 1
GPU 4, GpuMiner cu_k02 failed 30, unknown error
GPU 4, GpuMiner kx failed 1
GPU 1, GpuMiner cu_k02 failed 30, unknown error
GPU 1, GpuMiner kx failed 1
NVML: cannot get current temperature, error 999 (an internal driver error occurred)


Any help would be appreciated.. Thanks

Hi,  I know this is an old post but I was wondering if anyone else has encountered this issue and has found a solution.  I have 6 x 1080tis running at stock (msi afterburner not running) and do not get this error anymore but would love to overclock.  As soon as I turn on afterburner, even if I don't overclock,  I get the above error message.  Sometime within 10 minutes, sometimes after days of running fine.  I've also tried overclocking on NVOC and after awhile I get the same error.  Any help would be greatly greatly appreciated and will send some ether for your assistance.  Thanks!!!

I have only gotten this when OCing which is doing too high of an OC or OCing and not giving enough power via the powerlimit in order to support the OC.

Bitrated user: nexillus.
_Parallax_
Newbie
*
Offline Offline

Activity: 12


View Profile
June 29, 2017, 10:00:31 PM
 #1333

Fullzero thanks for detailed instruction of my idea and including it into nvOS v0017

here are some operations for image space releasing:

sudo apt update
sudo apt upgrade

sudo du -sh /var/cache/apt/archives
sudo apt-get clean

sudo apt-get autoremove
if after such operation we have such mistake as:
===
Errors were encountered while processing:
 linux-image-extra-4.4.0-65-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
===
we need to delete all failes manually:
ls /var/lib/dpkg/info/ | grep linux-image | grep 4.4.0-65

exactly:
====
linux-image-4.4.0-65-generic.list
linux-image-4.4.0-65-generic.postrm
linux-image-extra-4.4.0-65-generic.list
linux-image-extra-4.4.0-65-generic.md5sums
linux-image-extra-4.4.0-65-generic.postinst
linux-image-extra-4.4.0-65-generic.postrm
====

cd /var/lib/dpkg/info/
sudo rm linux-image-4.4.0-65-generic.list
sudo rm linux-image-4.4.0-65-generic.postrm
sudo rm linux-image-extra-4.4.0-65-generic.list
sudo rm linux-image-extra-4.4.0-65-generic.md5sums
sudo rm linux-image-extra-4.4.0-65-generic.postinst
sudo rm linux-image-extra-4.4.0-65-generic.postrm

repeat the command:

sudo apt-get autoremove

have to delete non usable linux-image in system

dpkg --list | grep linux-image

sudo apt-get purge linux-image-4.4.0-{31,59,62,64,65,66,72,75,78,79}
sudo apt-get purge linux-image-extra-4.4.0-31-generic
sudo apt-get purge linux-image-extra-4.4.0-31-generic
sudo apt-get purge linux-image-extra-4.4.0-59-generic
sudo apt-get purge linux-image-extra-4.4.0-62-generic
sudo apt-get purge linux-image-extra-4.4.0-64-generic
sudo apt-get purge linux-image-extra-4.4.0-66-generic
sudo apt-get purge linux-image-extra-4.4.0-72-generic
sudo apt-get purge linux-image-extra-4.4.0-75-generic
sudo apt-get purge linux-image-extra-4.4.0-78-generic
sudo apt-get purge linux-image-extra-4.4.0-79-generic

then exsecute

sudo apt-get -f install
sudo dpkg --configure -a

it allows to desсrease size image on 2++Gb


PS:I would like to add monitoring system into your project.
Now, I'm choosing from zabbix, munin and cacti. What would you advice?
OverEasy
Sr. Member
****
Offline Offline

Activity: 246


View Profile
June 29, 2017, 10:08:24 PM
 #1334

@Fullzero....

I now have OC control of the 1060 and 1070. My MoBo has 4 PCIe slots. 2 of them have the blue tabs on the back to hold cards down. THATS the 2 I ended up trying and now I can OC both cards. Of course when I add the other 2 cards I doubt I will be able to OC them. One of the cards is coming Saturday so I will try it then and let you know. BTW all my other cards are on eternal back order it seems lol.

Can you send me in either post or PM the original xorg.conf please. The changes I made have shrunk my TeamViewer so small I can barely see it.

Thanks again for your help
madbuda
Jr. Member
*
Offline Offline

Activity: 37

Hush Dev & MadMining.Club founder


View Profile WWW
June 30, 2017, 12:02:59 AM
 #1335

Fullzero thanks for detailed instruction of my idea and including it into nvOS v0017

here are some operations for image space releasing:

sudo apt update
sudo apt upgrade

sudo du -sh /var/cache/apt/archives
sudo apt-get clean

sudo apt-get autoremove
if after such operation we have such mistake as:
===
Errors were encountered while processing:
 linux-image-extra-4.4.0-65-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
===
we need to delete all failes manually:
ls /var/lib/dpkg/info/ | grep linux-image | grep 4.4.0-65

exactly:
====
linux-image-4.4.0-65-generic.list
linux-image-4.4.0-65-generic.postrm
linux-image-extra-4.4.0-65-generic.list
linux-image-extra-4.4.0-65-generic.md5sums
linux-image-extra-4.4.0-65-generic.postinst
linux-image-extra-4.4.0-65-generic.postrm
====

cd /var/lib/dpkg/info/
sudo rm linux-image-4.4.0-65-generic.list
sudo rm linux-image-4.4.0-65-generic.postrm
sudo rm linux-image-extra-4.4.0-65-generic.list
sudo rm linux-image-extra-4.4.0-65-generic.md5sums
sudo rm linux-image-extra-4.4.0-65-generic.postinst
sudo rm linux-image-extra-4.4.0-65-generic.postrm

repeat the command:

sudo apt-get autoremove

have to delete non usable linux-image in system

dpkg --list | grep linux-image

sudo apt-get purge linux-image-4.4.0-{31,59,62,64,65,66,72,75,78,79}
sudo apt-get purge linux-image-extra-4.4.0-31-generic
sudo apt-get purge linux-image-extra-4.4.0-31-generic
sudo apt-get purge linux-image-extra-4.4.0-59-generic
sudo apt-get purge linux-image-extra-4.4.0-62-generic
sudo apt-get purge linux-image-extra-4.4.0-64-generic
sudo apt-get purge linux-image-extra-4.4.0-66-generic
sudo apt-get purge linux-image-extra-4.4.0-72-generic
sudo apt-get purge linux-image-extra-4.4.0-75-generic
sudo apt-get purge linux-image-extra-4.4.0-78-generic
sudo apt-get purge linux-image-extra-4.4.0-79-generic

then exsecute

sudo apt-get -f install
sudo dpkg --configure -a

it allows to desсrease size image on 2++Gb


PS:I would like to add monitoring system into your project.
Now, I'm choosing from zabbix, munin and cacti. What would you advice?

@_Parallax_

Code:
sudo apt-get purge $(dpkg -l linux-{image,headers}-"[0-9]*" | awk '/ii/{print $2}' | grep -ve "$(uname -r | sed -r 's/-[a-z]+//')")
will do all of that in a single line
or install byobu then you can run `sudo purge-old-kernels`

I use zabbix with grafana. Gives me telegram alerts and pretty graphs
 
*edit, forgot the closing )

smokinggun46
Newbie
*
Offline Offline

Activity: 14


View Profile
June 30, 2017, 12:41:52 AM
 #1336

I have zcash-cli installed on another partition (ubuntu17) my SSD Drive, and i'm running nvOC from a USB. 

While I'm in nvOC, is there a way i can run zcash-cli from that SSD? without installing it again for nvOC
heavyinbitcoin12
Newbie
*
Offline Offline

Activity: 7


View Profile
June 30, 2017, 03:37:49 AM
 #1337

Hey Im just getting started with your software and am having some troubles.

I have no problem using nanopool for ethereum but when using ethermine.org I get "READ RESPONSE FAILED: End of File" over and over forever.  Using genoil.

With nanopool my line setting for pool is eth-us-west1.nanopool.org:9999    =works perfect
With ethermine my line says us2.ethermine.org:4444  = i get that error...


I only change this line everything else remains constant. Perfect with nano, no good with ethermine. What am i missing?

Thanks
RonaldMcDongle
Newbie
*
Offline Offline

Activity: 9


View Profile
June 30, 2017, 04:43:05 AM
 #1338

Just set up my first mining rig and am running nvOC and love it. Thanks so much for offering something like this!

Was wondering, if I wanted to mine xvg with ccminer on groestl algorithm, would I be able to do that? If so, how would I go about adding it in?

Thanks again!

I have this on my list; I will post after testing.

Awesome to hear! Looking forward to seeing how it performs on my rig
fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
June 30, 2017, 07:36:57 AM
 #1339

I never could get my EVGA 1070 SC to OC. Is there a trick to this? I've tried every combination of OC posted here over the past 2 weeks and the speed never changed.

First I would try reimaging the USB key.

then if it still isnt working:

press f12 and enter:

Code:
lspci | grep VGA

then

Code:
nvidia-smi
and tell me what it outputs.

Also if you are connecting a monitor directly to the motherboard (don't do this); only connect a monitor the the primary GPU (the one in the 16x slot closest to the CPU).




Thanks for your reply! It didn't work because I didn't have my monitor plugged in correctly. Is there any way to view the memory manufacturer within Linux?

These commands were ran while EWFB miner was running with default clocks.

lspci | grep VGA
Code:
m1@m1-desktop:~$ lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)


nvidia-smi
Code:
m1@m1-desktop:~$ nvidia-smi
Thu Jun 29 14:10:31 2017
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 378.13                 Driver Version: 378.13                    |
|-------------------------------+----------------------+----------------------+
| GPU  Name          Persistence-M| Bus-Id           Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070       Off  | 0000:01:00.0       On |                     N/A |
| 75%   62C    P2   141W / 151W |    746MiB /  8110MiB |     97%      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GTX 1070       Off  | 0000:02:00.0      Off |                      N/A |
| 75%   60C    P2   145W / 151W |    612MiB /  8114MiB |     99%      Default |
+-------------------------------+----------------------+----------------------+
|   2  GeForce GTX 1070       Off  | 0000:04:00.0      Off |                      N/A |
| 75%   62C    P2   145W / 151W |    612MiB /  8114MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   3  GeForce GTX 1070       Off  | 0000:05:00.0      Off |                      N/A |
| 75%   54C    P2   145W / 151W |    612MiB /  8114MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   4  GeForce GTX 1070       Off  | 0000:06:00.0      Off |                      N/A |
| 75%   48C    P2   145W / 151W |    612MiB /  8114MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   5  GeForce GTX 1070       Off  | 0000:09:00.0      Off |                      N/A |
| 75%   57C    P2   147W / 151W |    612MiB /  8114MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+
| Processes:                                                           GPU Memory |
|  GPU       PID  Type  Process name                               Usage      |
|=============================================================================|
|    0      1127    G   /usr/lib/xorg/Xorg                                    111MiB |
|    0      1821    G   compiz                                                     30MiB |
|    0     16326    C   /home/m1/zec/v3_4/miner                        593MiB |
|    1      1127    G   /usr/lib/xorg/Xorg                                       7MiB |
|    1     16326    C   /home/m1/zec/v3_4/miner                        593MiB |
|    2      1127    G   /usr/lib/xorg/Xorg                                        7MiB |
|    2     16326    C   /home/m1/zec/v3_4/miner                        593MiB |
|    3      1127    G   /usr/lib/xorg/Xorg                                        7MiB |
|    3     16326    C   /home/m1/zec/v3_4/miner                        593MiB |
|    4      1127    G   /usr/lib/xorg/Xorg                                        7MiB |
|    4     16326    C   /home/m1/zec/v3_4/miner                        593MiB |
|    5      1127    G   /usr/lib/xorg/Xorg                                       7MiB |
|    5     16326    C   /home/m1/zec/v3_4/miner                        593MiB |
+-----------------------------------------------------------------------------+
[/quote]

this cmd will give you detailed information; but its not as helpful as some of the windows tools:

Code:
lspci -vnn | grep VGA -A 12


fullzero
Legendary
*
Offline Offline

Activity: 1092



View Profile
June 30, 2017, 07:42:10 AM
 #1340

So i;m getting gpu stopped working with exiting thread errors on several rigs.

One rig is 6x 1050ti
Other rig is 3x 1060 and 3x 1050ti

Did a test with single rig (the 6x 1050ti one) connected directly to MikroTik instead of D-Link switch, it worked stable for 30 mins while it crashed after 15mins on D-Link. Is there any chance that a D-Link switch could be causing GPUs to crash (I don't see a reason how are those two things connected but still).

Tried both with default clocks and OC, still crashed. Anyone has an idea what could be an issue?

If you already tested OC; it might be powerlimit is too low or too high.

With switches:

make sure that each is directly connected to the router (unless you have a managed switch).


Pages: « 1 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 [67] 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 ... 287 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!