[OS] nvOC easy-to-use Linux Nvidia Mining

[lards]

Hi guys,

Installed 12 p106-100 mining cards into the ASrock h110 , when I boot with claymore the mining starts and then freezes withing couple of minutes with error 15 saying that it can't get any temperature info. I've updated the 1bash and the files in the first post but it doesn't seem to be working for some reason... I tried to change the miner to genoil and it mines for 10-15 minutes and then freezes the system as well .

Has anyone seen this before or maybe can advise on how to get rid of this error?

[1714199844]

1714199844

[1714199844]

1714199844

[Dhodge87]

Ok I was able to root and pull the current specs of my cards.
This is an 4x Gigabyte gtx 10606gb rig.
I have my MC set to 1050 in 1bash and if I'm reading this right it says I'm at a current clock of 8748 with a max of 8754.
How do I get more than a 750 MC increase?

https://i.imgur.com/Fh5XRQ4.png

If u want to mine SIGT u have to lower your MemTransferRate and up your nvclock

http://imgur.com/a/yZuOE

Be in root and

nvidia-settings -a /GPUGraphicsClockOffset[3]=value
nvidia-settings -a /GPUMemoryTransferRateOffset[3]=value

U can specify by GPU, like the other command

nvidia-settings -a [gpu:0]/GPUGraphicsClockOffset[3]=value
nvidia-settings -a [gpu:0]/GPUMemoryTransferRateOffset[3]=value

I am mining Eth
Is this what I need to do to get my cards on performance level 3?

I currently have in 1bash
CC=0
MC=950
But it doesn't appear to go past a MC of 750, in the Nvidia xserver it shows level 2 as highlighted and level 0,1,3 as greyed out and level 3 shows the clock that I have set in 1bash.


Also something else I noticed this morning
I have the powerlimit set to 75w right now in1bash.
When I start up everything runs smoothly for about 15 minutes, then one of my cards changes from a PL of 75 up to 125 and my MH/s drops from 161 down to 142.

I tested the rig with the card disconnected and it still has a 15-20 MH/s drop after about 15 minutes.

https://i.imgur.com/wJzXKVI.png

https://i.imgur.com/ra5iFQO.png

https://i.imgur.com/jy0ahPp.png

https://i.imgur.com/xZEtjTS.png

[dbolivar]

I have to make a ext4 and swap partitions and set "/" to path for ext4

What sizes should the drives be?

After that I use Raw Harddisk Copy to copy the nvOC img to the ext4 partition.

Is that it? Do I have to make bootmanager or what it's called?

You don't need all that: the nvOC img file is already a full partitioned image, including the bootloader; you just need to use HDDRawCopy, as instructed in the OP, to flash it in your USB stick. Don't need to do anything else, after a successful flash it should boot right away.

[Malbo]

Hey, ty for adding teamviewer to nvOC!

But i got a problem: teamviewer never start on boot, i always need to enter this on guake terminal :

sudo teamviewer --daemon enable


My rigs are not at home, and if i need to reboot this, i can't control after the reboot :-(, please help me.

[Bibi187]

Hey, ty for adding teamviewer to nvOC!

But i got a problem: teamviewer never start on boot, i always need to enter this on guake terminal :

sudo teamviewer --daemon enable


My rigs are not at home, and if i need to reboot this, i can't control after the reboot :-(, please help me.

On your 1bash be sure to set

TEAMVIEWER="YES"

[philipma1957]

can we do skunk on this?  on zpool


do I have to add the software to mine  or is the option added.

I been tied up for days fixing my btc and my bcc. the  free money was nice.

I now would like to do some skunk on my new build here.

[Malbo]

Hey, ty for adding teamviewer to nvOC!

But i got a problem: teamviewer never start on boot, i always need to enter this on guake terminal :

sudo teamviewer --daemon enable


My rigs are not at home, and if i need to reboot this, i can't control after the reboot :-(, please help me.

On your 1bash be sure to set

TEAMVIEWER="YES"

Oh thanks, there is a way to edit the 1bash in ubuntu ? if yes it need a restart ? thanks!

[JayneL]

Hi Guys,

This was really a great forum, especially for us newbie to linux mining.

I just want to ask im trying to setup my first ever Linux OS and Miner, i already did installing nvOC v18 on my sata hdd 500gb and successfully booted,
then i already setup 1bash for SIGT mining but i always stuck on this part and then the PC will auto-restart after a couple of minutes.



I hope you can help me.

Thanks

God Bless

[damNmad]

Hey, ty for adding teamviewer to nvOC!

But i got a problem: teamviewer never start on boot, i always need to enter this on guake terminal :

sudo teamviewer --daemon enable


My rigs are not at home, and if i need to reboot this, i can't control after the reboot :-(, please help me.

On your 1bash be sure to set

TEAMVIEWER="YES"

Oh thanks, there is a way to edit the 1bash in ubuntu ? if yes it need a restart ? thanks!

Yes, you can. It is in the home directory. Please search in home folder (where you see all miners)

EDIT:

For restart, to apply the 1bash changes you don't need to restart whole rig, you can kill the mining process using 'CTRL + c' and it should restart the process with new changes, if it doesn't just close the terminal after 'CTRL+c' and close the terminal and restart the terminal (not the rig)

[damNmad]

can we do skunk on this?  on zpool


do I have to add the software to mine  or is the option added.

I been tied up for days fixing my btc and my bcc. the  free money was nice.

I now would like to do some skunk on my new build here.

Yes you can mate, just browse around couple of pages back, there are instructions with comments (I could've quoted it but using mobile now sorry)

EDIT:

Here you go mate, tried my best, hope it helps...

Hi guys,

i do a little "how to" if some people want to mine SIGT / skunk algo.

First of all i use Palginmodccminer ( the SP_MOD is faster but u have to pay )

FIRST STEP GET THE CLIENT

### Be in home dir ###

cd /home/m1/

### Create a directory for your new miner ###

mkdir PMccminer

### Go in new dir ###

cd PMccminer/

### Download miner client ###

wget https://github.com/palginpav/ccminer/releases/download/1.1/palginmod_1.1_Ubuntu.tar.gz

### Extract the file ###

tar -zxvf palginmod_1.1_Ubuntu.tar.gz

### Delete start.sh ###

rm start.sh

### Back to home dir ###

cd /home/m1/

SECOND STEP EDIT BASH

### Open 1bash

nano 1bash

### Add SIGT  and  SIGT_BTC to the coin selection

# CHOOSE COIN FROM:
# DMD  GRS  ZPOOL_LYRA2V2  ZPOOL_BLAKE2S
# ZEC   ZCOIN  HUSH   ZEN  ZCL   SIGT  SIGT_BTC
# NICE_ETHASH  ETH    MUSIC  ETC  EXP  DCR  PASC
# MONA  VTC    DGB    SIA  FTC  LBC
# DUAL_ETC_DCR    DUAL_ETC_PASC    DUAL_ETC_LBC    DUAL_ETC_SC
# DUAL_EXP_DCR    DUAL_EXP_PASC    DUAL_EXP_LBC    DUAL_EXP_SC
# DUAL_ETH_DCR    DUAL_ETH_PASC    DUAL_ETH_LBC    DUAL_ETH_SC
# DUAL_MUSIC_DCR  DUAL_MUSIC_PASC  DUAL_MUSIC_LBC  DUAL_MUSIC_SC

### Add SIGT and SIGT_BTC specs ( u have to modify SIGT_WORKER and SIGT_ADDRESS by your seting )

SIGT_WORKER="SIGT"
SIGT_ADDRESS="Bibi187"
SIGT_POOL="stratum+tcp://sigt.suprnova.cc:7106"
 
###SIGT_BTC use BTC adresses###
SIGT_BTC_POOL="stratum+tcp://skunk.mine.zpool.ca:8433"

### If u use SIGT_BTC, be sure to get correct ( your BTC adress )

BTC_ADDRESS="3JJaMUVBJp55BNsGvYynaJhDXRyUf95hyG"

### Add miner specs to the end of ur file between the two last "fi"   ( ensure ur worker have x password on suprnova pool, or modify the "-p x" by "-p YourPassword" in the SIGT section )

if [ $COIN == "SIGT_BTC" ]
then
HCD='/home/m1/PMccminer/ccminer'
ADDR="$BTC_ADDRESS"
 
screen -dmS miner $HCD -a skunk -o $SIGT_BTC_POOL -u $ADDR -p c=SIGT
 
if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi
 
BITCOIN="theGROUND"
 
while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi
 
if [ $COIN == "SIGT" ]
then
HCD='/home/m1/PMccminer/ccminer'
ADDR="$SIGT_ADDRESS.$SIGT_WORKER"
 
screen -dmS miner $HCD -a skunk -o $SIGT_POOL -u $ADDR -p x
 
if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi
 
BITCOIN="theGROUND"
 
while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi

THIRD STEP OC SETTING ( ASUS 1070 GTX 8OG / prolly ok for most 1070 gtx )

First of all this algo, gona get a lot of heat from your card, he use core, not memory.

CoreClock : 120
MemClock : -2000
PowerLimit at default : 150W
Temp Target 70°
Fan between 95% - 75%  ( I use watchdog )

This fine tunning work like a charm 213mh/s on suprnova, 211mh/s on zpool

U have to disable

IAmNotAJeep_and_Maxximus007_WATCHDOG="NO"

Or your RIG gona get restart for nothing, i dont modify IAmNotAJeep_and_Maxximus007_WATCHDOG, if i do prolly i can get him work with this setup but more simple to stop him for this coin


Et voila

thanks for the walkthrough. there is a few things that i think are backwards on your instructions. on my nvoc the directories are /home/m1/ and you have /m1/home/ in your instructions.
also, with the settings i am entering into the fields for the suprnova pool info, i dont know if they are right or what is going on...i am getting a error when i run the terminal "stratum authentication failed" then trying again in 30 seconds. your settings show:
SIGT_WORKER="SIGT"
SIGT_ADDRESS="Bibi187"
SIGT_POOL="stratum+tcp://sigt.suprnova.cc:7106"

in suprnova, my worker is "firstname.systemnumber" example "lovecoin.sys1" - so would i make my settings look like SIGT_WORKER="lovecoin.sys1" ? also what am i editing to sigt_address?

Nice point about the path, the true one is /home/m1, i edit the post
SIGT_WORKER="sys1"
SIGT_ADDRESS="lovecoin"

Will do the job

[damNmad]

Hi Guys,

This was really a great forum, especially for us newbie to linux mining.

I just want to ask im trying to setup my first ever Linux OS and Miner, i already did installing nvOC v18 on my sata hdd 500gb and successfully booted,
then i already setup 1bash for SIGT mining but i always stuck on this part and then the PC will auto-restart after a couple of minutes.



I hope you can help me.

Thanks

God Bless

As per the instructions you need to disable watch_dog by setting it to 'NO'.

EDIT:

Sorry, just saw your screenshot, go to quake terminal by pressing F12.

Type

Code:

screen -r miner

It should show the mining process in that tab/quake terminal.

If it doesn't, then try disabling the watch dog and see.

Let me know if you still see the issue.

[tomlev5]

Hi!
I'm about to build a rig with Pentium G4400.
But after reading about Skylake issues with hyper threading don't know
should I use it or better to return and exchange it with i3?

i have a rig runs 8 cards with G3900, no problem.

I have a rig with G3900 and 10 cards, but it seems that the G3900 is bottlenecking the system. First core uses 100%, the other around 20%.

Is there a way to split the workload on both cores (If I could run EWBF miner in two terminals or is there some other way)?

Can somebody please help me, i'm a noob in linux.


nvOC is a great system. Thanks for all the work.

[JayneL]

Hi Guys,

This was really a great forum, especially for us newbie to linux mining.

I just want to ask im trying to setup my first ever Linux OS and Miner, i already did installing nvOC v18 on my sata hdd 500gb and successfully booted,
then i already setup 1bash for SIGT mining but i always stuck on this part and then the PC will auto-restart after a couple of minutes.



I hope you can help me.

Thanks

God Bless

As per the instructions you need to disable watch_dog by setting it to 'NO'.

EDIT:

Sorry, just saw your screenshot, go to quake terminal by pressing F12.

Type

Code:

screen -r miner

It should show the mining process in that tab/quake terminal.

If it doesn't, then try disabling the watch dog and see.

Let me know if you still see the issue.

I already disable watch dog still my ccminer skunk not running for SIGT, i use skunk miner spmod5 from github.. oh i try to mine ZEC and its working fine. but for SIGT no luck.. i just leave for an hour to buy a 32GB flash drive BRB

[damNmad]

Hi Guys,

This was really a great forum, especially for us newbie to linux mining.

I just want to ask im trying to setup my first ever Linux OS and Miner, i already did installing nvOC v18 on my sata hdd 500gb and successfully booted,
then i already setup 1bash for SIGT mining but i always stuck on this part and then the PC will auto-restart after a couple of minutes.



I hope you can help me.

Thanks

God Bless

As per the instructions you need to disable watch_dog by setting it to 'NO'.

EDIT:

Sorry, just saw your screenshot, go to quake terminal by pressing F12.

Type

Code:

screen -r miner

It should show the mining process in that tab/quake terminal.

If it doesn't, then try disabling the watch dog and see.

Let me know if you still see the issue.

I already disable watch dog still my ccminer skunk not running for SIGT, i use skunk miner spmod5 from github.. oh i try to mine ZEC and its working fine. but for SIGT no luck.. i just leave for an hour to buy a 32GB flash drive BRB

Which pool you use to mine ZEC and SIGT??

[JayneL]

for zec im using the default pool included in the nvOC, for the SIGT i use supernova that was working on my windows..i see that after disabling watchdog the machine now doesn't do any restart or crashing but still miner still not working. tnx for help can you help me via teamviewer?

[damNmad]

for zec im using the default pool included in the nvOC, for the SIGT i use supernova that was working on my windows..i see that after disabling watchdog the machine now doesn't do any restart or crashing but still miner still not working. tnx for help can you help me via teamviewer?

Have you added the required code for SIGT in your oneBash??

[JayneL]

yup i do.... still figuring out now...

[damNmad]

yup i do.... still figuring out now...

Have you followed the below instructions?? Please try the below again, if it doesn't work. happy to help you via teamviewer.

Hi guys,

i do a little "how to" if some people want to mine SIGT / skunk algo.

First of all i use Palginmodccminer ( the SP_MOD is faster but u have to pay )

FIRST STEP GET THE CLIENT

### Be in home dir ###

cd /home/m1/

### Create a directory for your new miner ###

mkdir PMccminer

### Go in new dir ###

cd PMccminer/

### Download miner client ###

wget https://github.com/palginpav/ccminer/releases/download/1.1/palginmod_1.1_Ubuntu.tar.gz

### Extract the file ###

tar -zxvf palginmod_1.1_Ubuntu.tar.gz

### Delete start.sh ###

rm start.sh

### Back to home dir ###

cd /home/m1/

SECOND STEP EDIT BASH

### Open 1bash

nano 1bash

### Add SIGT  and  SIGT_BTC to the coin selection

# CHOOSE COIN FROM:
# DMD  GRS  ZPOOL_LYRA2V2  ZPOOL_BLAKE2S
# ZEC   ZCOIN  HUSH   ZEN  ZCL   SIGT  SIGT_BTC
# NICE_ETHASH  ETH    MUSIC  ETC  EXP  DCR  PASC
# MONA  VTC    DGB    SIA  FTC  LBC
# DUAL_ETC_DCR    DUAL_ETC_PASC    DUAL_ETC_LBC    DUAL_ETC_SC
# DUAL_EXP_DCR    DUAL_EXP_PASC    DUAL_EXP_LBC    DUAL_EXP_SC
# DUAL_ETH_DCR    DUAL_ETH_PASC    DUAL_ETH_LBC    DUAL_ETH_SC
# DUAL_MUSIC_DCR  DUAL_MUSIC_PASC  DUAL_MUSIC_LBC  DUAL_MUSIC_SC

### Add SIGT and SIGT_BTC specs ( u have to modify SIGT_WORKER and SIGT_ADDRESS by your seting )

SIGT_WORKER="SIGT"
SIGT_ADDRESS="Bibi187"
SIGT_POOL="stratum+tcp://sigt.suprnova.cc:7106"
 
###SIGT_BTC use BTC adresses###
SIGT_BTC_POOL="stratum+tcp://skunk.mine.zpool.ca:8433"

### If u use SIGT_BTC, be sure to get correct ( your BTC adress )

BTC_ADDRESS="3JJaMUVBJp55BNsGvYynaJhDXRyUf95hyG"

### Add miner specs to the end of ur file between the two last "fi"   ( ensure ur worker have x password on suprnova pool, or modify the "-p x" by "-p YourPassword" in the SIGT section )

if [ $COIN == "SIGT_BTC" ]
then
HCD='/home/m1/PMccminer/ccminer'
ADDR="$BTC_ADDRESS"
 
screen -dmS miner $HCD -a skunk -o $SIGT_BTC_POOL -u $ADDR -p c=SIGT
 
if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi
 
BITCOIN="theGROUND"
 
while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi
 
if [ $COIN == "SIGT" ]
then
HCD='/home/m1/PMccminer/ccminer'
ADDR="$SIGT_ADDRESS.$SIGT_WORKER"
 
screen -dmS miner $HCD -a skunk -o $SIGT_POOL -u $ADDR -p x
 
if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi
 
BITCOIN="theGROUND"
 
while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi

THIRD STEP OC SETTING ( ASUS 1070 GTX 8OG / prolly ok for most 1070 gtx )

First of all this algo, gona get a lot of heat from your card, he use core, not memory.

CoreClock : 120
MemClock : -2000
PowerLimit at default : 150W
Temp Target 70°
Fan between 95% - 75%  ( I use watchdog )

This fine tunning work like a charm 213mh/s on suprnova, 211mh/s on zpool

U have to disable

IAmNotAJeep_and_Maxximus007_WATCHDOG="NO"

Or your RIG gona get restart for nothing, i dont modify IAmNotAJeep_and_Maxximus007_WATCHDOG, if i do prolly i can get him work with this setup but more simple to stop him for this coin


Et voila

thanks for the walkthrough. there is a few things that i think are backwards on your instructions. on my nvoc the directories are /home/m1/ and you have /m1/home/ in your instructions.
also, with the settings i am entering into the fields for the suprnova pool info, i dont know if they are right or what is going on...i am getting a error when i run the terminal "stratum authentication failed" then trying again in 30 seconds. your settings show:
SIGT_WORKER="SIGT"
SIGT_ADDRESS="Bibi187"
SIGT_POOL="stratum+tcp://sigt.suprnova.cc:7106"

in suprnova, my worker is "firstname.systemnumber" example "lovecoin.sys1" - so would i make my settings look like SIGT_WORKER="lovecoin.sys1" ? also what am i editing to sigt_address?

Nice point about the path, the true one is /home/m1, i edit the post
SIGT_WORKER="sys1"
SIGT_ADDRESS="lovecoin"

Will do the job

[car1999]

Hey, ty for adding teamviewer to nvOC!

But i got a problem: teamviewer never start on boot, i always need to enter this on guake terminal :

sudo teamviewer --daemon enable


My rigs are not at home, and if i need to reboot this, i can't control after the reboot :-(, please help me.

On your 1bash be sure to set

TEAMVIEWER="YES"

Oh thanks, there is a way to edit the 1bash in ubuntu ? if yes it need a restart ? thanks!

Yes, you can. It is in the home directory. Please search in home folder (where you see all miners)

EDIT:

For restart, to apply the 1bash changes you don't need to restart whole rig, you can kill the mining process using 'CTRL + c' and it should restart the process with new changes, if it doesn't just close the terminal after 'CTRL+c' and close the terminal and restart the terminal (not the rig)

press CTRL+c, it restarts 1bash, do you know how to disable this feature?
 I'd like to exit the terminal when I press CTRL+c, thanks.  

[hwlgraka]

Hello,

I have two scenarios, where I don't have a solution. And I'm not able to search only in this entire thread, is that possible?

Maxximus007_AUTO_TEMPERATURE_CONTROL is disabled
Config is set to REMOTE

1) Sometimes the miner get stuck. This means, that I can still open the session (screen -r miner), but I cannot kill it (pkill -e miner).
If I happen to be in that situation, how do I kill the miner? Sending a pkill -9 -e miner also doesn't help.

2) After the miner gets killed (via pkill -e miner), there is no screen session opened again (screen -ls returns nothing). How can I manually start the 1bash script again, so that it starts the corresponding and correct screen session?

Thanks very much in advance.
Kind regards