PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[fiucsavar]

The newest version of the miner doesn't read the config files as it used to.
I have copied over the old one that worked with the previous version just fine and now it just ignores it.

update : in the start_miner.bat file there are these 3 lines
"REM IMPORTANT: Replace the ETH address with your own ETH wallet address in the -wal option (Rig001 is the name of the rig)
PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001
pause"

if you delete the bold part, it will read your config files

[kevyong]

Hi,

I keep getting multiple instances of Phoenixminer running/restarting at the same time immediately after crashes... with the error message being "Waiting 15 s for previous instance to close".

How do I keep this from happening? Please help.

Thank you.

what drivers are you using? amd or nvidia cards? what os? what is your start up command line?

Either 1060 or 1070 running on Nvidia 391.35 on either Win 7 or Win 10.
Command line parameters:
-rmode 1 -wdog 1 -cdm 2

And oh, I'm using Awesome Miner for my rigs.



I've tried -gswin 0 and -wdog 0 to no avail. Any suggestions are very much welcome, thank you again.

Ideally the whole command line would help. You should add -v 3 to it to show more verbose messages. Never used Awesome miner so cant speak to it.

Do you have lots of page file swap space? Can you try running card not overclocked?

My problem disappeared just as mysteriously as it had first appeared, and all I did was to restart my main PC that runs the Awesome Miner software, hmmm. Anyways, thanks for the suggestion, much appreciated!

[ScalperBTC]

Who can tell what that means?
Video card: Sapphire Nitro + RX 470 4Gb (Elpida)
http://i.piccy.info/i9/8597bbfde029931187da3682412923af/1557159587/41200/1316632/011.png

[laik2]

Who can tell what that means?
Video card: Sapphire Nitro + RX 470 4Gb (Elpida)

-> https://bitcointalk.org/index.php?topic=2647654.msg50917403#msg50917403 <-

[big_daddy]

Who can tell what that means?
Video card: Sapphire Nitro + RX 470 4Gb (Elpida)

can you please share with us what are you dualmining here? and what are the profits

[lesjokolat]

Hi,
I have issues with PhoenixMiner 4.2c version(Win10 x64 1703). Problem is; Phoenix giving error message "software stopped working" after a few hours. Sometimes not stopping but not giving share too, going to offline. What is the problem?

More info needed.

What is start script?

add -v 3 to it so we get more verbose messaging.  Hardware how much ram? how much pagefile memory? What are you running AMd or nvidia?

4GBRam, Amd RX580(6) Nvidia P104-100(6),  Pagefile memory 36000MB

As you only have 4 gigs ram and are using 12 GPUs I would recommend double up to 72000MB pagefile. Also add the -v 3 to startup script and see what happens.

[UnclWish]

Anyone tried AMD 19.4.3 drivers? Does 4.2c support them?

[Burgbosh]

Anyone tried AMD 19.4.3 drivers? Does 4.2c support them?

Does this miner support the latest amd gpu pro 18.50 for linux?

[BogdanCo]

Anyone tried AMD 19.4.3 drivers? Does 4.2c support them?

Does this miner support the latest amd gpu pro 18.50 for linux?

It's working with 18.50 but you loose some speed, like 0,5-1 Mh/s on ETH

[UnclWish]

Anyone tried AMD 19.4.3 drivers? Does 4.2c support them?

So no one tried to install latest driver and run Phoenix miner?

[SigiSinatra]

Can you please add ProgPow for Zano ?
Thank you.

[lstrike]

Anyone tried AMD 19.4.3 drivers? Does 4.2c support them?

So no one tried to install latest driver and run Phoenix miner?

I have tested 580 and Vegas on 19.4.2 and saw no difference regarding speed.

[Digital_Seytan]

Hello PM dev is it possible with phoenixminer dual mining ethereum based coin and nimic coin?
and when can we expect a new version of phoenixminer?

[plastkort]

I'm having a bit trouble with phoenixminer and my miningexpert B250 motherboard... it finds all my 6 gpus and starts filling up the DAG, however sometimes it fails to do so with a few of the gpus, which resulting in the computer crash with bluescreen then reboots.

this repeats often many times after consecutive retries after reboots, and sometimes it works after a poweroff...


any clue to what causes this ?

[aarts]

I'm having a bit trouble with phoenixminer and my miningexpert B250 motherboard... it finds all my 6 gpus and starts filling up the DAG, however sometimes it fails to do so with a few of the gpus, which resulting in the computer crash with bluescreen then reboots.

this repeats often many times after consecutive retries after reboots, and sometimes it works after a poweroff...


any clue to what causes this ?

What PSU ?

[KiparisD]

I'm having a bit trouble with phoenixminer and my miningexpert B250 motherboard... it finds all my 6 gpus and starts filling up the DAG, however sometimes it fails to do so with a few of the gpus, which resulting in the computer crash with bluescreen then reboots.

this repeats often many times after consecutive retries after reboots, and sometimes it works after a poweroff...


any clue to what causes this ?

Beside the PSU, check also your x1 headers from risers in MB, cause i have had almost same probs, i have absolutely overkill PSU power and even show all green pcie slots on POST, but on load two of 15 x1 headers in MB was completely shutdown (it has LED on it so i can see, two leds turn red instead blue), replaced in my case and good to go, and check cables, risers and connection between of course  

[GKumaran]

Can you please add ProgPow for Zano ?
Thank you.

Seconded !!

[ScalperBTC]

Is it planned to expand the dual algorithms? If planned, when to wait and what algorithms will be added? And somehow everything is sad with Blake2s ...

[Iame3]

Why phoenix not mining callisto with 2gb card, while claymore can do this? "Not enough vram for epoch 87"   Ok, found that this is happening with 4.2c, while 3.0c is working.

[UnclWish]

What about AMD 19.5.1 drivers? Does bouble kernels work on it?