Bitcoin Forum
September 24, 2021, 02:47:36 AM *
News: Latest Bitcoin Core release: 22.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: « 1 ... 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 [202] 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 ... 473 »
  Print  
Author Topic: PhoenixMiner 5.7b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)  (Read 688082 times)
mineshop.eu
Copper Member
Member
**
Offline Offline

Activity: 315
Merit: 29


View Profile WWW
December 27, 2019, 01:43:37 PM
 #4021

Sapphire, reference card (blower turbine fan).
Not sure about the RX5700 reference card , but have had bad experience with reference cards in the past with RX480 few of the cards stooped working after few days.
The OC you are using doesnt seem like it would affect the gpu, its always number of things not just one. Maybe the memory cooling is very bad on these cards which could made issues.

1632451656
Hero Member
*
Offline Offline

Posts: 1632451656

View Profile Personal Message (Offline)

Ignore
1632451656
Reply with quote  #2

1632451656
Report to moderator
1632451656
Hero Member
*
Offline Offline

Posts: 1632451656

View Profile Personal Message (Offline)

Ignore
1632451656
Reply with quote  #2

1632451656
Report to moderator
1632451656
Hero Member
*
Offline Offline

Posts: 1632451656

View Profile Personal Message (Offline)

Ignore
1632451656
Reply with quote  #2

1632451656
Report to moderator
The block chain is the main innovation of Bitcoin. It is the first distributed timestamping system.
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1632451656
Hero Member
*
Offline Offline

Posts: 1632451656

View Profile Personal Message (Offline)

Ignore
1632451656
Reply with quote  #2

1632451656
Report to moderator
guzzymese
Newbie
*
Offline Offline

Activity: 84
Merit: 0


View Profile
December 27, 2019, 07:12:41 PM
 #4022

Those cards that died, like others 2 that works now (I speak in the name of my friend, wich cards died 2 from 4), keep them under 66 celcius degrees, tipically between 62-64 celcius degrees.

Mines stays all under 60.

So, wich is the max safe memory freq for RX5700(XT), so these cards runs safe? 885, 900, 920MHz?
Binary100100
Member
**
Offline Offline

Activity: 180
Merit: 10


View Profile
December 27, 2019, 08:04:20 PM
 #4023

These are my settings:
-tt 58 -cvddc 750 -cclock 1300 -fanmin 0 -mclock 900 -amd -mode 1 -clKernel 1 -clNew 1

Anything higher than 900 mclock (even a 905) crashes after about 5 minutes.

I'm using the XFX 5700XT reference versions.

With these settings it's rock solid.
Between 58C to 60C and pulling between 93 - 95 watts.
Ursul0
Sr. Member
****
Offline Offline

Activity: 845
Merit: 262


View Profile
December 28, 2019, 08:19:03 AM
 #4024

Those cards that died, like others 2 that works now (I speak in the name of my friend, wich cards died 2 from 4), keep them under 66 celcius degrees, tipically between 62-64 celcius degrees.

Mines stays all under 60.

So, wich is the max safe memory freq for RX5700(XT), so these cards runs safe? 885, 900, 920MHz?

there's no "max safe" mem frequency. depends on the maker and memory, also on silicon quality, so you need to check each gpu individually. Also 7nm 5700 runs fine at around 750-780mw.
guzzymese
Newbie
*
Offline Offline

Activity: 84
Merit: 0


View Profile
December 28, 2019, 02:17:47 PM
Last edit: December 28, 2019, 06:30:16 PM by guzzymese
 #4025

I said "max frequency safe", because a friend of mine own 4 cards RX5700 (non XT), keeped them 1 month at -24% power limit, (around 1290-1300MHz GPU core for -24% power limit) and 895MHz memory, everything was flawless, 0 restarts, 0 errors or rig locked. After that he decided to push them all, upper to 920MHz mem, keeping others settings the same, and in couple hours after increase mem at 920MHz, 2 cards from 4, DIED, rog restarted itself and 2 cards unrecognized, cannot load drivers for it, also tested separately on desktop, same sgit, not recognized by drivers, no signal out, etc.  He used as me too, MSI Afterburner. Now 2 cards are go back to warranty.

So, that's why I said "max freq safe", because pusing em up 920MHz for memory, it killed 2 cards.

I keep mines like this (1x 5700 and 4x 5700XT)

https://imgur.com/hTEtXQv
sergioheadache
Jr. Member
*
Offline Offline

Activity: 42
Merit: 1


View Profile
December 28, 2019, 07:21:56 PM
 #4026

I said "max frequency safe", because a friend of mine own 4 cards RX5700 (non XT), keeped them 1 month at -24% power limit, (around 1290-1300MHz GPU core for -24% power limit) and 895MHz memory, everything was flawless, 0 restarts, 0 errors or rig locked. After that he decided to push them all, upper to 920MHz mem, keeping others settings the same, and in couple hours after increase mem at 920MHz, 2 cards from 4, DIED, rog restarted itself and 2 cards unrecognized, cannot load drivers for it, also tested separately on desktop, same sgit, not recognized by drivers, no signal out, etc.  He used as me too, MSI Afterburner. Now 2 cards are go back to warranty.

So, that's why I said "max freq safe", because pusing em up 920MHz for memory, it killed 2 cards.

I keep mines like this (1x 5700 and 4x 5700XT)




i would like to buy your dead cards
guzzymese
Newbie
*
Offline Offline

Activity: 84
Merit: 0


View Profile
December 28, 2019, 10:42:30 PM
Last edit: December 29, 2019, 01:40:15 AM by guzzymese
 #4027

Not mine, they already gone to warranty at the shop.
sergioheadache
Jr. Member
*
Offline Offline

Activity: 42
Merit: 1


View Profile
December 29, 2019, 08:27:52 AM
 #4028

Not mine, they already gone to warranty at the shop.

ohh cool, i tried to send some cards to warranty once but they said warranty is void because i mined on them...
guzzymese
Newbie
*
Offline Offline

Activity: 84
Merit: 0


View Profile
December 29, 2019, 09:53:51 AM
 #4029

That's not good, they cannot demonstrate the card was minned or not, also on the warranty paper doesn't write anything about mining with card will void warranty...
sergioheadache
Jr. Member
*
Offline Offline

Activity: 42
Merit: 1


View Profile
December 29, 2019, 10:58:14 AM
 #4030

actually they can demonstrate, they checked the bios and see that it was flashed for mining
and also, in this store where i bought they had a little text that say for warranty is for "normal home use" (its actually a bad translation) but you get the point.

anyways, if you dont get them replaced or fixed, i would buy them for parts.
PM me it it will be relevant.
tg88
Hero Member
*****
Offline Offline

Activity: 1470
Merit: 689


View Profile
December 29, 2019, 11:35:33 AM
 #4031

actually they can demonstrate, they checked the bios and see that it was flashed for mining
and also, in this store where i bought they had a little text that say for warranty is for "normal home use" (its actually a bad translation) but you get the point.

Curious, which country are you from?
In this case I would choose gpus that do not need to change BIOS for good results.
guzzymese
Newbie
*
Offline Offline

Activity: 84
Merit: 0


View Profile
December 29, 2019, 11:50:03 AM
 #4032

No need to flash bios for mining (just if you want to squeeze last 0,x MH from it, in my opinion doesn't worth the risk), also if the card is dead, bios is useless. I don't think they desolder bios for checking it if was flashed or not, also if they do that, you can blame them for flashed intentionately that bios/or hardware modiification especially for voiding warranty. Is your word against they word. I don't know they are accreditate to desolder bios chip or make hardware modification (as seller or service, it they are not official AMD), any hardware modification will void automatically warranty. I think important is to have intact AMD sticker on screew.
sergioheadache
Jr. Member
*
Offline Offline

Activity: 42
Merit: 1


View Profile
December 29, 2019, 12:04:59 PM
 #4033

Curious, which country are you from?
In this case I would choose gpus that do not need to change BIOS for good results.

Im from Israel

No need to flash bios for mining (just if you want to squeeze last 0,x MH from it, in my opinion doesn't worth the risk), also if the card is dead, bios is useless. I don't think they desolder bios for checking it if was flashed or not, also if they do that, you can blame them for flashed intentionately that bios/or hardware modiification especially for voiding warranty. Is your word against they word. I don't know they are accreditate to desolder bios chip or make hardware modification (as seller or service, it they are not official AMD), any hardware modification will void automatically warranty. I think important is to have intact AMD sticker on screew.

flashing bios is not only for 0.xMH, there are many more reasons

and in my case, card was not completely dead, i was working but crashing all the time, so they could check the bios.
it is also my fault for not flashing back to original - i was young and stupid back then LOL

guzzymese
Newbie
*
Offline Offline

Activity: 84
Merit: 0


View Profile
December 29, 2019, 01:49:59 PM
 #4034

Then, no further comments... Flash back original bios!
PhoenixMiner
Member
**
Offline Offline

Activity: 340
Merit: 82


View Profile
December 30, 2019, 09:17:00 AM
Last edit: March 09, 2021, 01:39:13 AM by PhoenixMiner
 #4035

The new beta version is ready. You can download PhoenixMiner 4.9b from here:

(MEGA links are no longer active)

If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows):
Code:
   File: PhoenixMiner_4.9b_Windows.zip
    ===================================
   SHA-1: 4b8f002bfed687938580a60354ee74ba2b9ed97a
 SHA-256: 5ab17ce168d2da17ad49e8cd9a0263abdfc5e9412079458026f1dede64fb15c1
 SHA-512: 71d9cf2a65d378900bbb616895f4f4cede8da8fa8ae19352491f82e82e27e9e079e7c879789afb833db2b588527f391acc725d74a638f8b91b9356e0d48add8a

    File: PhoenixMiner_4.9b_Linux.tar.gz
    ====================================
   SHA-1: d8dd717c554227da8834880b8d9a93b4e589b8b0
 SHA-256: e357ed9fc56e13f627d5a576fff7b6c84d0790a7ce85a1ac6dd2022e30dd5c15
 SHA-512: 8829b3d65818a016fa42f57e09d22a7aa26cc50e287f28837ea9cde59626f70f3dcdf9b641744053259e12fc6132e98553b092cf80f676cf329996adce3c6b10

    File: PhoenixMiner_NVRTC_Windows.zip
    ====================================
   SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
 SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
 SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4

The new features in this release are:

  • Added support for AMD RX5500 cards
  • Added support for the latest AMD Windows drivers 19.12.3
  • Fixed the problem with loading NVML library with the latest Nvidia drivers
  • Fixed a problem that was introduced in 4.8c causing mismatching of the cards when using more than one value in -cclock or any other command-line argument with more than one value (i.e. when using different values for each card)
  • Added an HTML version of the documentation for better navigation and readability

Please let us know if you have any problems or questions related to PhoenixMiner 4.9b.
zertor
Jr. Member
*
Offline Offline

Activity: 30
Merit: 2


View Profile
December 30, 2019, 02:36:23 PM
 #4036

Super, works fine.

I get:
Quote
GPU1: unable to get fan speed - Not Supported (3)

It's expected message, because my card don't have such feature,
but is it possible to suppress it? [turn it off] (its annoying to appear constantly)
or to appear one time only while initialization.
qqqq
Legendary
*
Offline Offline

Activity: 1596
Merit: 1000


View Profile
December 30, 2019, 08:37:07 PM
 #4037

The new beta version is ready. You can download PhoenixMiner 4.9b from here:

https://mega.nz/#F!2NkkjaxC!OOFiV0uPuPI1YoebTE7hMw  (MEGA)

If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows):
Code:
   File: PhoenixMiner_4.9b_Windows.zip
    ===================================
   SHA-1: 4b8f002bfed687938580a60354ee74ba2b9ed97a
 SHA-256: 5ab17ce168d2da17ad49e8cd9a0263abdfc5e9412079458026f1dede64fb15c1
 SHA-512: 71d9cf2a65d378900bbb616895f4f4cede8da8fa8ae19352491f82e82e27e9e079e7c879789afb833db2b588527f391acc725d74a638f8b91b9356e0d48add8a

    File: PhoenixMiner_4.9b_Linux.tar.gz
    ====================================
   SHA-1: d8dd717c554227da8834880b8d9a93b4e589b8b0
 SHA-256: e357ed9fc56e13f627d5a576fff7b6c84d0790a7ce85a1ac6dd2022e30dd5c15
 SHA-512: 8829b3d65818a016fa42f57e09d22a7aa26cc50e287f28837ea9cde59626f70f3dcdf9b641744053259e12fc6132e98553b092cf80f676cf329996adce3c6b10

    File: PhoenixMiner_NVRTC_Windows.zip
    ====================================
   SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
 SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
 SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4

The new features in this release are:

  • Added support for AMD RX5500 cards
  • Added support for the latest AMD Windows drivers 19.12.3
  • Fixed the problem with loading NVML library with the latest Nvidia drivers
  • Fixed a problem that was introduced in 4.8c causing mismatching of the cards when using more than one value in -cclock or any other command-line argument with more than one value (i.e. when using different values for each card)
  • Added an HTML version of the documentation for better navigation and readability

Please let us know if you have any problems or questions related to PhoenixMiner 4.9b.

Didn't fixed a bug

Code:
Eth: Failed to submit hashrate: Exception -32601 : METHOD_NOT_FOUND: The method
being requested is not available on this server: the method eth_submitHashrate d
oes not exist/is not available

Proper name "eth_submitHashRate" now i guess.
VasilyS
Member
**
Offline Offline

Activity: 589
Merit: 18


View Profile WWW
December 30, 2019, 09:23:35 PM
 #4038

4.8c didn't work on my AMD rigs, there were constant crashes. I used 4.8b as more stable version. After few hours of checking 4.9b looks good. Frankly, there is no changes in hashrate in comparison with previous versions.

                             ❱  CRYPTOPROFI  ❱
0xcosmos
Full Member
***
Offline Offline

Activity: 594
Merit: 110


View Profile
December 31, 2019, 08:38:12 PM
 #4039

4.8c didn't work on my AMD rigs, there were constant crashes. I used 4.8b as more stable version. After few hours of checking 4.9b looks good. Frankly, there is no changes in hashrate in comparison with previous versions.

did you try updating the graphics driver to the latest version?
then you may not have constant crashes like you have in 4.8c version
VasilyS
Member
**
Offline Offline

Activity: 589
Merit: 18


View Profile WWW
January 01, 2020, 04:41:38 AM
 #4040

4.8c didn't work on my AMD rigs, there were constant crashes. I used 4.8b as more stable version. After few hours of checking 4.9b looks good. Frankly, there is no changes in hashrate in comparison with previous versions.

did you try updating the graphics driver to the latest version?
then you may not have constant crashes like you have in 4.8c version
Yes, I tried. Phoenix said that it was a bag with multiGPU system with different overclock settings.

                             ❱  CRYPTOPROFI  ❱
Pages: « 1 ... 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 [202] 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 ... 473 »
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!