|
aarts
Newbie
Offline
Activity: 16
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 14, 2018, 03:24:42 PM |
|
Hello Who knows why with all the cards that exist in rig such a periodic decrease in the hashrate lasts for about two minutes All RX580 cards (Windows OS 10) are an example on the screen of one card, the config settings are lower, but they have no effect, checked https://ibb.co/foYAQL -pool stratum+tcp://etc.hvpps.net:3333 -wal ***.name -pass x -proto 4 -coin etc -amd -mi 14 -gt 20 -retrydelay 10 -fret 10 -gsi 10 -gswin 30 -ftimeout 180 -ptimeout 10 -stales 1 -eres 5 -clf 2 -gser 0 -dbg 0 -log 0 You -gt setting is wrong. Let the autotune make -gt setting. you can lower -mi too. get little les hasrate but miner mines better.
|
|
|
|
Bael
Jr. Member
Offline
Activity: 87
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 14, 2018, 11:19:56 PM |
|
Hello What -proto I have to use to metaverse in Sandpool? http://etp.sandpool.orgGreetings guys!
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 15, 2018, 06:58:36 AM |
|
Interesting Miner ...
Will research to see if it works under Fedora 27-29 x64 or CentOS 7 x64.
#crysx
|
|
|
|
KriptoFull
Newbie
Offline
Activity: 394
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 19, 2018, 07:00:16 PM |
|
Tell me you fixed the problem with the DOUG file!It does not load for 1050 ti cards
|
|
|
|
van-13
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 19, 2018, 08:27:16 PM |
|
Hi people! There is a problem with running miner on linux. Perhaps this data will help correct the situation. HW on rig 6 * GTX 1060 6Gb Command: strace /root/criptix/PhoenixMiner_3.5d_Linux/PhoenixMiner Data on the link to pastebin dot com - https://pastebin.com/AjBPdGqASysinfo: root@porteus:~/criptix/PhoenixMiner_3.5d_Linux# cat /etc/*release* NAME=Porteus VERSION="3.2" ID=slackware VERSION_ID=3.2 PRETTY_NAME="Porteus 3.2" ANSI_COLOR="0;34" CPE_NAME="cpe:/o:porteus:porteus_linux:3.2" HOME_URL=" http://www.porteus.org/" SUPPORT_URL=" http://forum.porteus.org/" BUG_REPORT_URL=" http://forum.porteus.org/"
|
|
|
|
kevyong
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 20, 2018, 10:52:56 AM |
|
Hi,
Regarding the -coin <coin> functionality, am I right to presume that if I'm mining, say ETP, I can only use this option to specify the DevFee pool to be either the default ETH pool or the ETP pool? I cannot specify the DevFee pool to be some other coin like CLO, right?
Thank you all.
Great miner BTW, better than Claymore for sure!
|
|
|
|
ShirtPants!
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 20, 2018, 07:32:23 PM |
|
Hey everyone! I just got an RX 590 and when I try to start PhoenixMiner it says no opencl found. I have driver version 18.11.2 installed also. It is in a PC with a 1080ti as the main GPU. Claymore runs fine with it so does WildRig Multi 13.1. Please help!
|
|
|
|
bategojko74
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 220
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 20, 2018, 08:01:56 PM |
|
Hey everyone! I just got an RX 590 and when I try to start PhoenixMiner it says no opencl found. I have driver version 18.11.2 installed also. It is in a PC with a 1080ti as the main GPU. Claymore runs fine with it so does WildRig Multi 13.1. Please help!
Try drivers before18.10.XX. I use 18.3.XX
|
|
|
|
NCarter84
Jr. Member
Offline
Activity: 195
Merit: 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 22, 2018, 02:58:46 AM |
|
Could really use this on the Ubiq fork! Any eta?
|
|
|
|
ShirtPants!
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 22, 2018, 03:16:41 AM |
|
Hey everyone! I just got an RX 590 and when I try to start PhoenixMiner it says no opencl found. I have driver version 18.11.2 installed also. It is in a PC with a 1080ti as the main GPU. Claymore runs fine with it so does WildRig Multi 13.1. Please help!
Try drivers before18.10.XX. I use 18.3.XX I just tried that and the older driver's don't recognize it, I get error 182. ![Cry](https://bitcointalk.org/Smileys/default/cry.gif)
|
|
|
|
Antony197878
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 23, 2018, 06:54:09 AM |
|
Could really use this on the Ubiq fork! Any eta?
no, it doesnt work witn new ubiq(( rejected shares and nothing
|
|
|
|
ManDoneKTM
Newbie
Offline
Activity: 150
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2018, 03:51:24 AM |
|
@PhoenixMiner , any news of the new version of PM ?
|
|
|
|
Nippy-ua
Newbie
Offline
Activity: 48
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2018, 12:59:39 AM |
|
Win 7 1060 3g -bench 230 (good test) start mining , error in CudaProgram.cu:407 : out of memory why ? if bench good
|
|
|
|
agismaniax
Newbie
Offline
Activity: 49
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2018, 09:10:14 AM |
|
Hello guys! Does the miner support the latest drivers, because I have just installed them and tried to run the miner, but I get this message instead >>
2018.11.10:15:29:16.242: main Phoenix Miner 3.5d Windows/msvc - Release build 2018.11.10:15:29:16.242: main Cmd line: -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0xf045ea0aa168870d9322f04f776eccc1ba3621f2 -cclock 1140 -mclock 2200 -cvddc 900 -mvddc 920 -fanmin 40 -fanmax 80 -tt 45 2018.11.10:15:29:16.242: main No CUDA driver found 2018.11.10:15:29:16.242: main No OpenCL platforms found 2018.11.10:15:29:16.242: main No avaiable GPUs for mining. Please check your drivers and/or hardware. 2018.11.10:15:29:16.242: main Exit code: 8
RX580s with 18.11.1.
I can, though, mine without any hassle with the SRBMiner other algos..
I think phoenixminer 3.5d only work fine with adrenalin 18.2.1. Hey everyone! I just got an RX 590 and when I try to start PhoenixMiner it says no opencl found. I have driver version 18.11.2 installed also. It is in a PC with a 1080ti as the main GPU. Claymore runs fine with it so does WildRig Multi 13.1. Please help!
afaik... DDU all AMD and Nvidia drivers. Install adrenalin 18.2.1 first, and then install the latest version of catalyst.
|
|
|
|
PhoenixMiner (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2018, 04:23:42 PM Last edit: March 09, 2021, 01:51:13 AM by PhoenixMiner |
|
The first beta of the new release is finally ready. You can download PhoenixMiner 4.0a from here: (MEGA links are no longer active) If you want to check the integrity of the downloaded file, please use the following hashes: File: PhoenixMiner_4.0a_Windows.zip =================================== SHA-1: b1d6cd530b45821922a7334199f3928132ebd816 SHA-256: 82c0045fcf2454b72e33b583ce0ffeceb91d69015e46f4eb88fb2d1e12db3f39 SHA-512: 8cba60fb19613accd2dcaedb76602b5c48e47fe38b942b5f69f76fc711e7154ad51738c4b6d13f41bffb68e34b1bad6a72186a5acbc9826f79b69da209cbf058
File: PhoenixMiner_4.0a_Linux.tar.gz ==================================== SHA-1: 6c1f1139e1b39539997e5c6d0afe6ce8902dd5cc SHA-256: 85f11236d66c09cfc9b176808f4849da0d15b5de0f43e0138e44a37cd9094bfa SHA-512: 804b799c658c2ddc0fcf437d9528cbc6c6193b87abcb483b78c709bc6ed6c05fe55a6b1e0977c45bca1e568705023e9ca8c1ccc3f73d2256047e5801d7cb5904
Here are the changes since the last release: * Implemented dual mining (Ethash/Blake2s) for some AMD GPUs (RX580/570/560/480/470/460 and Vega). Use the new -dpool, -dwal, -dpass, -dworker, and -dcoin options to set the Blake2s pool. You can set the secondary coin mining intensity with the -sci option. For more information see the Readme.txt file. Note that the devfee when using dual mining is 0.9% on the ethash coin (there is no devfee on the secondary coin). * New kernels for most AMD GPUs with better performance and hashrate stability (you may need to run auto-tune again to find the best GT values) * New kernels for Nvidia GPUs with slightly better hashrate * Stability improvements in the Linux version * Support for the latest Windows drivers for AMD GPUs (up to 18.11.2) * Many other small fixes and improvements Here is an example command-line to use dual-mining with Nicehash: PhoenixMiner.exe -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal YourBtcWalletAddress -pass x -proto 4 -stales 0 -dpool blake2s.eu.nicehash.com:3361 -dwal YourBtcWalletAddress -dcoin blake2s
|
|
|
|
PhoenixMiner (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2018, 04:34:08 PM Last edit: November 26, 2018, 05:11:21 PM by PhoenixMiner |
|
Here are some notes on the new release: - The best -sci values may be found via auto-tuning similar to the best -gt values in the ethash-only mode. You can either press "z" in the miner's console when dual-mining, or specify -sci 0 at the command line to force auto tune in dual-mining mode. Note that the auto-tune will find the best -sci value with respect to the speed of the ethash algorithm, even if the speed of the Blake2s becomes too low as a result of that.
- We got a lot of requests for Ubqhash support and we are in the process of implementing it. However it seems that some of the pools are still a little buggy. The ubqhash support should be ready in a few days.
- Unfortunately, the hardware control improvements weren't ready for this release. 4.0a still only supports controlling the clocks/fans/temperatures only on AMD GPUs under Windows. We will try to finish the changes for the final 4.0 release in about two weeks but the improvements in the kernels were deemed more important. There is no change in the hardware control for Linux too - you still have to use third party application for this
- The dual mining for the rest of AMD cards, and for Nvidia cards in currently being implemented.
- Finally, please note that the versions of PhoenixMiner before 4.0 only support DAG epoch up to 235. Currently ETC is on DAG 233, so in less than two weeks the old version of PhoenixMiner won't be able to create DAG or mine ETC - you have to upgrade to PhoenixMiner 4.0. For ETH there is more time as it is on DAG 225, and it won't be affected until the next year. As with ETC, you just need to upgrade to the latest version of PhoenixMiner in order to fix the problem.
|
|
|
|
haliy-2017
Newbie
Offline
Activity: 74
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2018, 08:20:10 PM |
|
Can a batch file for double mining, what am I doing wrong? PhoenixMiner.exe -pool stratum+tcp://eu.bsod.pw:5766 -wal EHTzcQm5XBDm5gukrYJu................... -pass x -proto 4 -stales 0 -dpool eth-eu.dwarfpool.com:8008 -dwal 0xe9383e093930b0a1de................rig1 -dcoin blake2s
|
|
|
|
Soliqesh
Newbie
Offline
Activity: 48
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2018, 11:10:46 PM |
|
Thx for updates:)
|
|
|
|
PhoenixMiner (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2018, 08:49:28 AM |
|
Can a batch file for double mining, what am I doing wrong? PhoenixMiner.exe -pool stratum+tcp://eu.bsod.pw:5766 -wal EHTzcQm5XBDm5gukrYJu................... -pass x -proto 4 -stales 0 -dpool eth-eu.dwarfpool.com:8008 -dwal 0xe9383e093930b0a1de................rig1 -dcoin blake2s
You must use -pool, -wal, -pass, -proto for the Ethash coin, and -dpool, -dwal, -dcoin for the secondary coin (blake2s). In your case this is the command line (replace the address in -dwal with your valid Shield (XSH) address, otherwise the pool will refuse to authorize the miner): PhoenixMiner.exe -pool eth-eu.dwarfpool.com:8008 -wal 0xe9383e093930b0a1de................rig1 -pass x -dpool stratum+tcp://eu.bsod.pw:5766 -dwal SdSpXPPbpsfTVf8vbmB7QH9QhVV3g1Z64A -dcoin blake2s
|
|
|
|
|