Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment

[streetuff]

thanks for the tip. speedy gives me

Date    Operation    Settlement
2013-11-29 17:16:53    Canceled :
SYSTEM RETURN    SOFIA


so marto. when will you ship my devices?

Are you live on EU or outside EU?

Non EU should  not choose DPD shipping.

i'm in germany. i'll be off to my family for christmas eve now. marry christmas to all!

[albon]

so

If you need to use wires to conect the board to the PSU do you just snip the connector off and strip the wires or is there a better way to do it?

I was planning on getting a full modular psu so I could run these and a bfl30 at the same time.

[mudge]

So if these don't come with a molex 4 pin power connector what power supply should you use?
http://www.amazon.co.uk/gp/product/B00FLVIQQ8/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A17AS5ETPMZ9A1
does this one fit the bill and how would I get 2 wire connections out of it?

[stan258]

I just got TP link Router from Amazon, getting ready for my December delivery.  Flashed it.  I do need some guidence on how to upgrade it to the new release of the firmware.  I have uploaded it but CGMiner still has old version.   I feel like an idiot.  

[iFA88]

Can you give me an answer please?!

Dear Marto!
I sent 2 emails to you but i did not get any answer from you.
I have a few questions to you.
I ordered in 4th of December 2x3 boards. Between two orders is 1-2 hour. First: SNOUOBCFN is with DPD economy shipment, the other is: VUMCRQDKX . Please merge this two order to one with DPD shipment.Thank you
I have a question: I ordered it 04-12-2013 and my question is when will be ship?
There is any solution to refund? In case yes, Get I my money back in BTC or USD?

Thanks for the answer!

Best Regards:
-Andor 'iFA88' Rajci

Code:

VUMCRQDKX 	2013-12-04 	899,90€ 	bitpay 	Payment accepted 	Invoice PDF 	details Reorder
SNOUOBCFN 	2013-12-04 	927,90€ 	bitpay 	Payment accepted 	Invoice PDF 	details Reorder

[Zich]

thanks for the tip. speedy gives me

Date    Operation    Settlement
2013-11-29 17:16:53    Canceled :
SYSTEM RETURN    SOFIA


so marto. when will you ship my devices?

Are you live on EU or outside EU?

Non EU should  not choose DPD shipping.

i'm in germany. i'll be off to my family for christmas eve now. marry christmas to all!

Man, so nowaday DPD had problem sending in EU too. I feels sorry to hear that streetuff

[streetuff]

thanks for the tip. speedy gives me

Date    Operation    Settlement
2013-11-29 17:16:53    Canceled :
SYSTEM RETURN    SOFIA


so marto. when will you ship my devices?

Are you live on EU or outside EU?

Non EU should  not choose DPD shipping.

i'm in germany. i'll be off to my family for christmas eve now. marry christmas to all!

Man, so nowaday DPD had problem sending in EU too. I feels sorry to hear that streetuff

it did not even leave bulgaria. what i quoted from speedy is the only line in the tracking system!
i hope marto will finally be aware that parcels where not shipped to his customers...
dont know how often i should try to contact him. no replies yet :-(

[Zich]

so

If you need to use wires to conect the board to the PSU do you just snip the connector off and strip the wires or is there a better way to do it?

I was planning on getting a full modular psu so I could run these and a bfl30 at the same time.

Yups that's the easiest way to do. But if you are hardcore, you can make connector so you don't had to cut the PSU wires.
I was working on it right now while waiting my HEX16A2. I will post the picture later  

[Zich]

it did not even leave bulgaria. what i quoted from speedy is the only line in the tracking system!
i hope marto will finally be aware that parcels where not shipped to his customers...
dont know how often i should try to contact him. no replies yet :-(

Try posting here again & again, & send message from technobit website.

[streetuff]

it did not even leave bulgaria. what i quoted from speedy is the only line in the tracking system!
i hope marto will finally be aware that parcels where not shipped to his customers...
dont know how often i should try to contact him. no replies yet :-(

Try posting here again & again, & send message from technobit website.

if nothing happens i will open a new topic to let marto get his reputation back. i'm not the only one that paid and didnt get their devices. i try to keep calm. i try.... *sigh*

[Zich]

So if these don't come with a molex 4 pin power connector what power supply should you use?
http://www.amazon.co.uk/gp/product/B00FLVIQQ8/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A17AS5ETPMZ9A1
does this one fit the bill and how would I get 2 wire connections out of it?

Any good PSU will work if in their power spec. But you will need to cut down the cable provided by PSU, PCI-E, SATA, or molex then use the yellow(+12V) wire & black(ground) wire.

[Zich]

I just got TP link Router from Amazon, getting ready for my December delivery.  Flashed it.  I do need some guidence on how to upgrade it to the new release of the firmware.  I have uploaded it but CGMiner still has old version.   I feel like an idiot.  

To flash with openwrt go to SYSTEM TOOLS - FIRMWARE UPGRADE then browse for the image that downloaded from technobit.
Use factory.bin image

Latest version is 0.1.3 Download

After flashing, the default ip is 192.168.0.99.

[stan258]

I just got TP link Router from Amazon, getting ready for my December delivery.  Flashed it.  I do need some guidence on how to upgrade it to the new release of the firmware.  I have uploaded it but CGMiner still has old version.   I feel like an idiot.  

To flash with openwrt go to SYSTEM TOOLS - FIRMWARE UPGRADE then browse for the image that downloaded from technobit.
Use factory.bin image

Latest version is 0.1.3 Download

After flashing, the default ip is 192.168.0.99.

Thanks

[Zich]

I just got TP link Router from Amazon, getting ready for my December delivery.  Flashed it.  I do need some guidence on how to upgrade it to the new release of the firmware.  I have uploaded it but CGMiner still has old version.   I feel like an idiot.  

To flash with openwrt go to SYSTEM TOOLS - FIRMWARE UPGRADE then browse for the image that downloaded from technobit.
Use factory.bin image

Latest version is 0.1.3 Download

After flashing, the default ip is 192.168.0.99.

Thanks

No problem 

[mudge]

thanks

[Jeffrey]

Okay can anyone help me please?
1 got 2 hex16a2 boards.
One came with molex (yay) one came without (yuk, now i have to cut cables...)

Anyway, I can't get them to run with hexminer. I've installed them (win7 x64) with the driver from the technobit site, installation was without problems.

So I've downloaded hexminer, I've set up my pool information on the top-left part of the window.
At serial protocol I can chose a COM port and something which looks like a baudrate, but whatever I pick, the device doesn't show up on the right side when I click start. (at least, that's what I'm assuming should happen)

There is also a part between serial protocol and pool settings which is called CPU, when I click start, nothing happens either...

Eehh... help?   please

Thanks

edit:
Hmmmm!!
Seems to be doing... something... I think... the software is just really slow when I click start or stop the software freezes but after a minute or so, it unfreezes and does something.

edit2:
nah sorry, still need help. The device shows up on the right side now, but it just won't start mining... I tried 2 different pools (btc guild and eclipsemc) but it just doesn't start.

[marto74]

Okay can anyone help me please?
1 got 2 hex16a2 boards.
One came with molex (yay) one came without (yuk, now i have to cut cables...)

Anyway, I can't get them to run with hexminer. I've installed them (win7 x64) with the driver from the technobit site, installation was without problems.

So I've downloaded hexminer, I've set up my pool information on the top-left part of the window.
At serial protocol I can chose a COM port and something which looks like a baudrate, but whatever I pick, the device doesn't show up on the right side when I click start. (at least, that's what I'm assuming should happen)

There is also a part between serial protocol and pool settings which is called CPU, when I click start, nothing happens either...

Eehh... help?   please

Thanks

edit:
Hmmmm!!
Seems to be doing... something... I think... the software is just really slow when I click start or stop the software freezes but after a minute or so, it unfreezes and does something.

edit2:
nah sorry, still need help. The device shows up on the right side now, but it just won't start mining... I tried 2 different pools (btc guild and eclipsemc) but it just doesn't start.

Team viewer please

[Jeffrey]

Okay can anyone help me please?
1 got 2 hex16a2 boards.
One came with molex (yay) one came without (yuk, now i have to cut cables...)

Anyway, I can't get them to run with hexminer. I've installed them (win7 x64) with the driver from the technobit site, installation was without problems.

So I've downloaded hexminer, I've set up my pool information on the top-left part of the window.
At serial protocol I can chose a COM port and something which looks like a baudrate, but whatever I pick, the device doesn't show up on the right side when I click start. (at least, that's what I'm assuming should happen)

There is also a part between serial protocol and pool settings which is called CPU, when I click start, nothing happens either...

Eehh... help?   please

Thanks

edit:
Hmmmm!!
Seems to be doing... something... I think... the software is just really slow when I click start or stop the software freezes but after a minute or so, it unfreezes and does something.

edit2:
nah sorry, still need help. The device shows up on the right side now, but it just won't start mining... I tried 2 different pools (btc guild and eclipsemc) but it just doesn't start.

Team viewer please

Thanks for offering. I'll try to contact you after xmas, got to go to a family thing soon
Could you please tell me if my working method is OK?
Or tell briefly what the start/stop buttons do ? (both at CPU and serial)
Thanks and merry xmas!

[Zich]

Merry Christmas, Merry Christmas, Ho Ho Ho. I hope all of you enjoy this holiday  

While waiting for my HEX16A2, i make power connector for the miner which will get power from EPS 12V connector from PSU.
I use EPS 12 V because my PSU not fully modular & come with 2X EPS 12V connector, so waste to not use them


Seasonic M12II Bronze 620W                                            Buy cheap ATX 20 to 24 pin converter on ebay to make the connector

                                         


Then cut down the require segment that match EPS 12V connector, replace the cable to meet power requirement.
Base on observation with HEX16A, using only 1 wire, the yellow wire on PSU side is little warm.
So i decided to use two wire & use 1,5 mm2 wire on miner side so loshia won't scold me  

   

So whenever the HEX16A2 come with molex or terminal screw, it's doesn't matter  

[stan258]

Merry Christmas, Merry Christmas, Ho Ho Ho. I hope all of you enjoy this holiday  

While waiting for my HEX16A2, i make power connector for the miner which will get power from EPS 12V connector from PSU.
I use EPS 12 V because my PSU not fully modular & come with 2X EPS 12V connector, so waste to not use them


Seasonic M12II Bronze 620W                                            Buy cheap ATX 20 to 24 pin converter on ebay to make the connector

         


Then cut down the require segment that match EPS 12V connector, replace the cable to meet power requirement.
Base on observation with HEX16A, using only 1 wire, the yellow wire on PSU side is little warm.
So i decided to use two wire & use 1,5 mm2 wire on miner side so loshia won't scold me  





So whenever the HEX16A2 come with molex or terminal screw, it's doesn't matter  

I hope it comes molex.  I am not positive which wires to strip.