Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment

[acidfox]

my ip is 192.168.0.23

Hi stifla,
please use a IP scanner to scann your network and find out the ip of the tp-link router. After you have find the IP you can connect to the router an set a new IP.
But think about, if you change settings in the webinterface you have to save them first then you can apply them.
If you change the site or click apply without saving first all changes are lost.
http://www.advanced-ip-scanner.com/de/

[1714125880]

1714125880

[stiffla]

my ip is 192.168.0.23

Hi stifla,
please use a IP scanner to scann your network and find out the ip of the tp-link router. After you have find the IP you can connect to the router an set a new IP.
But think about, if you change settings in the webinterface you have to save them first then you can apply them.
If you change the site or click apply without saving first all changes are lost.
http://www.advanced-ip-scanner.com/de/

hi,
I already tried to scan the network, same ip as on main router.
also tried failsafe mode (sets router to failsafe mode and ip 192.168.1.1 to flash via telnet the factory image) = no success to get a connection

[acidfox]

hi,
I already tried to scan the network, same ip as on main router.
also tried failsafe mode (sets router to failsafe mode and ip 192.168.1.1 to flash via telnet the factory image) = no success to get a connection

You cant use the same IP at once. Please connect directly to the "miner"-router and set a diffrent one.
But assure that your pc is in same network (192.168.1.x) because this router shouldnt DHCP and so the PC didnt get an IP automaticly.

[stiffla]

hi,
I already tried to scan the network, same ip as on main router.
also tried failsafe mode (sets router to failsafe mode and ip 192.168.1.1 to flash via telnet the factory image) = no success to get a connection

You cant use the same IP at once. Please connect directly to the "miner"-router and set a diffrent one.
But assure that your pc is in same network (192.168.1.x) because this router shouldnt DHCP and so the PC didnt get an IP automaticly.

I never said that it has the same ip as main router, only said that the scan shows the same ip of "miner" router as my internet router shows. I understand that two devices in the same network can't have the same ip. But regardless of that, i can't connect as I already mentioned, neither with satic ip nor with dhcp (my network has a 192.168.0.xxx -255 range)

[benyus16]

Dear Marto!

You wrote that "We'll continue shipping on 30-th of December , but most probably there still be some late December orders that will be left for shipping in the 1-st week of January." . Today is 30th of december and i have NOT got email from you AGAIN with shipment number!

When will you ship?? or what was the last order date what you sent?

Thanks!

[Destiffmast]

@Marto

My order is from the 28 of November and still not shipped, yet there are people here with orders placed after claiming they have already received their order! How can this happen?

[mudge]

so any news on these.
My order still only shows as payment accepted.

If these have not gone to production it is very unlikly that they will be shiped out befor the new year so....Technobit.....
what comp you going to offer?

[acidfox]

I never said that it has the same ip as main router, only said that the scan shows the same ip of "miner" router as my internet router shows. I understand that two devices in the same network can't have the same ip. But regardless of that, i can't connect as I already mentioned, neither with satic ip nor with dhcp (my network has a 192.168.0.xxx -255 range)

Sorry i missunderstood your post.
You wrote you reset the TP router. Also you wrote that your IP is 192.168.0.30. If you reset the router standard IP is 192.168.1.1 and if you use the normal Subnetmask 255.255.255.0 (IP range 192.168.0.1 - 192.168.0.254) you can't reach the routers standard IP (192.168.1.1) because its another network. So you have to change your IP of your PC.

Have you tried to start the router in fail safe mode?
http://wiki.openwrt.org/doc/howto/generic.failsafe#in.failsafe.mode

[benyus16]

Did somebody get email from Technobit today whit a shipment number?

[bitminton]

nope

[Destiffmast]

Hi Marin

Order Reference THWTNWVXK -- placed on 2013-11-28

Was this order not meant to have been shipped already?

Please let me know or I have to cancel the transaction coz it is very close to 45 days since I have placed it.

Thanks

[stiffla]

I never said that it has the same ip as main router, only said that the scan shows the same ip of "miner" router as my internet router shows. I understand that two devices in the same network can't have the same ip. But regardless of that, i can't connect as I already mentioned, neither with satic ip nor with dhcp (my network has a 192.168.0.xxx -255 range)

Sorry i missunderstood your post.
You wrote you reset the TP router. Also you wrote that your IP is 192.168.0.30. If you reset the router standard IP is 192.168.1.1 and if you use the normal Subnetmask 255.255.255.0 (IP range 192.168.0.1 - 192.168.0.254) you can't reach the routers standard IP (192.168.1.1) because its another network. So you have to change your IP of your PC.

Have you tried to start the router in fail safe mode?
http://wiki.openwrt.org/doc/howto/generic.failsafe#in.failsafe.mode

yes i know that the router has to be within the same network range ^^
192.168.1.1 is not the standard ip ( as already mentioned) its the failsafe modes ip which I can't get access to
standarf ip is 192.168.0.254 and with openwrt patch its 192.168.0.99

[Sixem]

Did somebody get email from Technobit today whit a shipment number?

Not today, but i got one friday the 27th , my order was from 26-11

[benyus16]

Thanks, so i think they are at end of november shipment.

Did somebody get email from Technobit today whit a shipment number?

Not today, but i got one friday the 27th , my order was from 26-11

[elchorizo]

Just to make it clear
We started accepting December delivery orders from 15-th of November and quantity was sold out around 12-th of December.
So order placed on 1-st of December is not early December shipment order

I agree but they where still December shipment so what compensation will you be offering for a missed deadline?
Also can we cancel due to missed deadline?

I think a lot of customers would like to know.

We are doing our best @ the moment not to miss it for now

Best Martin

Broken promises for sure. I'm wondering what will be done to make it up to your loyal customers.

[zulover]

Ok  simply put, what can we expect in compensation for delayed order when it has gone past december deadline?

[Destiffmast]

No one else got it, can't see it happening to us either but sure would like to hear from the man himself..

[awgilyas]

Marto any updates on these two orders?

BGZDFSWUA

HYGNHKTFQ


And can you place merge the shipments as both are going to the same destination.


Thanks.

[braindead]

Can anyone help me ?? My tp-link router is not finding my Hex16A ??  


 cgminer version 3.8.4 - Started: [2013-12-31 02:16:12]
--------------------------------------------------------------------------------
 (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  WU:0.0/m
 ST: 2  SS: 0  NB: 1  LW: 6  GF: 0  RF: 0

[Zich]

Can anyone help me ?? My tp-link router is not finding my Hex16A ??  


 cgminer version 3.8.4 - Started: [2013-12-31 02:16:12]
--------------------------------------------------------------------------------
 (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  WU:0.0/m
 ST: 2  SS: 0  NB: 1  LW: 6  GF: 0  RF: 0

Try to change usb cable.
This is interesting, did you buy the TPLINK TL-MR3020 from technoBTCit?
I am sure that marto not publish the image that contain cgminer 3.8.4.