Cyper_BLC
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 490
Merit: 270
Reverse Engineer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 17, 2015, 01:12:18 AM Last edit: April 17, 2015, 01:28:57 AM by Cyper_BLC |
|
But at least your S4 is safe from DD4BC? After BMT's encounter with the ransom this year, I would assume that was put in for their own farm's protection, not ours. Removing voltage control, well that was removed for our own protection ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) They haven't learned yet that people cannot be saved from their own stupidity I suppose... This is not true, and they can do well. They can put a limit on voltage control to 0725, and users cant exceed this limit, with only a few cgi commands on s4s web page. THAT'S EASY, BUT THEY DONT DO! i heard a rumor bankrupt for bitmain company ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) , i dont know is this real or not but they have a financial situations and they are only 4 people left in their company ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) another rumor is, bitmain chips BM1380-1382-1384 are not their chips, this chips are making in different company then bitmain labeled them. eg. https://ehash.com/ , http://avalon-asic.com/ why avalon didnt bankrupt or down? asicminer ( http://www.cybtc.org/article-75-1.html) , cointerra,butterflylabs..down & spondoolies is sale, this is very very interesting... So, we are in trouble dude. ![Cry](https://bitcointalk.org/Smileys/default/cry.gif)
|
For donations : 1CYPERv5yZ4c9FRzPyCz5u8vhttyKmVkto Emeğe Saygı Göstermeyenler, BECERIKSIZ kişilerdir.
|
|
|
luthermarcus
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 17, 2015, 03:05:10 AM |
|
Lol if that is true that they arw going bankrupt its becuase they got too greedy and started their own farms instead just selling asics becuase you cant go wronf with turning over a profit for a pruduct unless people want there money back. Why would you say wr are in trouble. You dont think tht will reflect in bitcoin prices cuz i doubt that less miners means we are more important.
|
Donate Bitcoin 1Mz7ZHxPhoH1ZK2yQvo62NdHvvsS2quhzc Donate TRX TB3WiLEj6iuSBU5tGUKyZkjB4vqrBDvoYM
|
|
|
Prelude
Legendary
Offline
Activity: 1596
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 17, 2015, 04:10:52 AM |
|
Forget about undervolting, bitmain has disabled voltage control starting with firmware released on Jan 29th. If you want to undervolt and underclock, you'll have to use firmware from Oct. 16th.
The S4 should run on either 120v or 240v. You shouldn't be blowing fuses.
Hey do you know of any good mods that out for this. I know that nicehash has cgminer 4.9 available. I heard of a fan mod but seems dangerous and do know why people would want to lower fan speed would be nice to increase it to keep it cooler. A quiter fan would be nice but not at the cost of heat ruining the unit. The best mod you can do on the S4 is replacing the PSU which is a ticking time bomb, 4 out of 7 of mine failed, and the only reason I still have 3 working PSUs is because I pulled them and replaced them with proper server grade PSUS before they died. (IBM DPS2000 [2000w] and IBM H-2880 [2880w]) The fan mod isn't dangerous IMO, and bitmain adding the feature officially (via --bitmain-homemode toggle) seems to support that. If you don't care about noise, then no need to run that way except perhaps to prolong fan life. Yes, the fans fail often also. I brought 2x S4s into my house to run in the basement to provide heat during the past winter, and slowing the fans down made that possible in my case. Don't think my woman would have tolerated the noise else-wise. You aren;t actually slowing the fans down, rather pushing back the temperature at which they ramp up. Seems to cause a ~5c increase in temps, which is fine and a good tradeoff IMO.
|
|
|
|
dmwardjr
Legendary
Offline
Activity: 1302
Merit: 1318
Technical Analyst/Trader
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 17, 2015, 05:37:11 AM |
|
Hi everyone,
This may already be in this forum somewhere. I was hoping someone might can save me some time to let me know if they have similar issues:
Anytime my power goes out [due to a storm] and comes back on, all of my S3's and SP20's come back on and continue mining. However, my five (5) S4's do not come back on. I have to physically turn them back on myself with the power button. Does anyone else have this same issue? Is there a way I can make them come back on when the power comes back on?
Thank you,
David
|
|
|
|
Prelude
Legendary
Offline
Activity: 1596
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 17, 2015, 05:46:34 AM |
|
Hi everyone,
This may already be in this forum somewhere. I was hoping someone might can save me some time to let me know if they have similar issues:
Anytime my power goes out [due to a storm] and comes back on, all of my S3's and SP20's come back on and continue mining. However, my five (5) S4's do not come back on. I have to physically turn them back on myself with the power button. Does anyone else have this same issue? Is there a way I can make them come back on when the power comes back on?
Thank you,
David
Yes, that's normal. The S4's power switch isn't a regular toggle switch like ATX PSUs. You'd need to rig something to keep the button depressed all the time. I know of a way, but I won't post it because it might not be safe considering the sometimes spectacular fashion these PSUs die. I don't want to be responsible for a fire. How much of an issue is it really anyways? Does your power go out every week or something?
|
|
|
|
Finksy
Legendary
Offline
Activity: 1022
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 18, 2015, 02:39:30 AM |
|
This is not true, and they can do well. They can put a limit on voltage control to 0725, and users cant exceed this limit, with only a few cgi commands on s4s web page. THAT'S EASY, BUT THEY DONT DO! i heard a rumor bankrupt for bitmain company ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) , i dont know is this real or not but they have a financial situations and they are only 4 people left in their company ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) another rumor is, bitmain chips BM1380-1382-1384 are not their chips, this chips are making in different company then bitmain labeled them. eg. https://ehash.com/ , http://avalon-asic.com/ why avalon didnt bankrupt or down? asicminer ( http://www.cybtc.org/article-75-1.html) , cointerra,butterflylabs..down & spondoolies is sale, this is very very interesting... So, we are in trouble dude. ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) My apologies, sarcasm doesn't always show in my posts the way I intend it. I also think bitmain's choice to remove voltage control was stupid, and the problem is with their choice of SHIT psu's, not people's choice to under or over volt. I was making a joke about the fact that they won't give us any reasonable explanation as to why they removed it, when it is obviously due to their PSU's failing for other reasons. As for them being bankrupt, I have no idea, and can't comment. Anything is possible right now, weird things in the industry lately.
|
|
|
|
Speedster1978
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 94
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 18, 2015, 06:22:04 AM |
|
I still need to work on getting my S4s dead PSU replaced... just not had time to deal with it ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
luthermarcus
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 18, 2015, 10:33:48 AM |
|
Forget about undervolting, bitmain has disabled voltage control starting with firmware released on Jan 29th. If you want to undervolt and underclock, you'll have to use firmware from Oct. 16th.
The S4 should run on either 120v or 240v. You shouldn't be blowing fuses.
Hey do you know of any good mods that out for this. I know that nicehash has cgminer 4.9 available. I heard of a fan mod but seems dangerous and do know why people would want to lower fan speed would be nice to increase it to keep it cooler. A quiter fan would be nice but not at the cost of heat ruining the unit. The best mod you can do on the S4 is replacing the PSU which is a ticking time bomb, 4 out of 7 of mine failed, and the only reason I still have 3 working PSUs is because I pulled them and replaced them with proper server grade PSUS before they died. (IBM DPS2000 [2000w] and IBM H-2880 [2880w]) The fan mod isn't dangerous IMO, and bitmain adding the feature officially (via --bitmain-homemode toggle) seems to support that. If you don't care about noise, then no need to run that way except perhaps to prolong fan life. Yes, the fans fail often also. I brought 2x S4s into my house to run in the basement to provide heat during the past winter, and slowing the fans down made that possible in my case. Don't think my woman would have tolerated the noise else-wise. You aren;t actually slowing the fans down, rather pushing back the temperature at which they ramp up. Seems to cause a ~5c increase in temps, which is fine and a good tradeoff IMO. I was looking into the two psu's you recommended. (IBM DPS2000 [2000w] and IBM H-2880 [2880w]) niether of them see would be a perfect fit and the connections dont seem similar can you provide a link and if it needs new wires can you provide a link for that too.
|
Donate Bitcoin 1Mz7ZHxPhoH1ZK2yQvo62NdHvvsS2quhzc Donate TRX TB3WiLEj6iuSBU5tGUKyZkjB4vqrBDvoYM
|
|
|
Prelude
Legendary
Offline
Activity: 1596
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 18, 2015, 03:48:25 PM |
|
Forget about undervolting, bitmain has disabled voltage control starting with firmware released on Jan 29th. If you want to undervolt and underclock, you'll have to use firmware from Oct. 16th.
The S4 should run on either 120v or 240v. You shouldn't be blowing fuses.
Hey do you know of any good mods that out for this. I know that nicehash has cgminer 4.9 available. I heard of a fan mod but seems dangerous and do know why people would want to lower fan speed would be nice to increase it to keep it cooler. A quiter fan would be nice but not at the cost of heat ruining the unit. The best mod you can do on the S4 is replacing the PSU which is a ticking time bomb, 4 out of 7 of mine failed, and the only reason I still have 3 working PSUs is because I pulled them and replaced them with proper server grade PSUS before they died. (IBM DPS2000 [2000w] and IBM H-2880 [2880w]) The fan mod isn't dangerous IMO, and bitmain adding the feature officially (via --bitmain-homemode toggle) seems to support that. If you don't care about noise, then no need to run that way except perhaps to prolong fan life. Yes, the fans fail often also. I brought 2x S4s into my house to run in the basement to provide heat during the past winter, and slowing the fans down made that possible in my case. Don't think my woman would have tolerated the noise else-wise. You aren;t actually slowing the fans down, rather pushing back the temperature at which they ramp up. Seems to cause a ~5c increase in temps, which is fine and a good tradeoff IMO. I was looking into the two psu's you recommended. (IBM DPS2000 [2000w] and IBM H-2880 [2880w]) niether of them see would be a perfect fit and the connections dont seem similar can you provide a link and if it needs new wires can you provide a link for that too. No, they won't fit inside the S4. I don't know of any PSU that would be the same form factor as the original. You'd need to run them externally and route the wires in where the old PSU was, you need wires that are 36" long. For the DPS2000, look up sidehack's breakout board + wires. For the 2880w, look up Finksy & J4bberwock's breakout board + cables.
|
|
|
|
Speedster1978
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 94
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 18, 2015, 04:34:47 PM |
|
Which of those two PSUs you mentioned are the cheaper solution if you combine PSU + Board + cables?
|
|
|
|
dmwardjr
Legendary
Offline
Activity: 1302
Merit: 1318
Technical Analyst/Trader
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 18, 2015, 04:43:30 PM |
|
Hi everyone,
This may already be in this forum somewhere. I was hoping someone might can save me some time to let me know if they have similar issues:
Anytime my power goes out [due to a storm] and comes back on, all of my S3's and SP20's come back on and continue mining. However, my five (5) S4's do not come back on. I have to physically turn them back on myself with the power button. Does anyone else have this same issue? Is there a way I can make them come back on when the power comes back on?
Thank you,
David
Yes, that's normal. The S4's power switch isn't a regular toggle switch like ATX PSUs. You'd need to rig something to keep the button depressed all the time. I know of a way, but I won't post it because it might not be safe considering the sometimes spectacular fashion these PSUs die. I don't want to be responsible for a fire. How much of an issue is it really anyways? Does your power go out every week or something? Yes, my power goes out when it storms practically every time. It has stormed a lot here lately.
|
|
|
|
Prelude
Legendary
Offline
Activity: 1596
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 18, 2015, 07:01:33 PM |
|
Which of those two PSUs you mentioned are the cheaper solution if you combine PSU + Board + cables?
If you only have 1 S4, probably the DP2000. If you have 2 S4s, you can run both of them off of 1 2880w. Either way, I'd probably go with the 2880w.
|
|
|
|
Speedster1978
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 94
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2015, 05:13:47 AM |
|
Which of those two PSUs you mentioned are the cheaper solution if you combine PSU + Board + cables?
If you only have 1 S4, probably the DP2000. If you have 2 S4s, you can run both of them off of 1 2880w. Either way, I'd probably go with the 2880w. Right now I have 4 S4 and just 1 of them has a bad PSU, but I am sure that in the future I'll have another PSU go out, so you are right, I'd rather get the 2880w parts. I talked to someone a week or so ago when I first had issues, need to find that PM and order parts... just not had time to mess with it
|
|
|
|
jds1119
Newbie
Offline
Activity: 63
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2015, 05:48:12 AM |
|
If someone could point me in the right direction I'd appreciate it. I have a 4 S4's. Today one of then just stopped hashing. It still runs but just not doing any work, says o ghs on the led. I restart it and it gets up close to the 2TH and then slowly(over 10 mins) goes to 0 again. I updated the firmware, same thing happened. I leave these at work so its a pain in the ass to go there 3 times on a Saturday to reset them. I just got back the final time and as soon as I get home it say zero again. Please and thanks. Is this a symptom that I need a new PSU or is there something wrong with the miner. Thanks again
|
|
|
|
luthermarcus
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2015, 07:37:11 AM |
|
If someone could point me in the right direction I'd appreciate it. I have a 4 S4's. Today one of then just stopped hashing. It still runs but just not doing any work, says o ghs on the led. I restart it and it gets up close to the 2TH and then slowly(over 10 mins) goes to 0 again. I updated the firmware, same thing happened. I leave these at work so its a pain in the ass to go there 3 times on a Saturday to reset them. I just got back the final time and as soon as I get home it say zero again. Please and thanks. Is this a symptom that I need a new PSU or is there something wrong with the miner. Thanks again
Sorry to say that one sounds like it is shot. If power stays connected and it reads zero sorry bud. Check if it is giving you x's on your monitor.
|
Donate Bitcoin 1Mz7ZHxPhoH1ZK2yQvo62NdHvvsS2quhzc Donate TRX TB3WiLEj6iuSBU5tGUKyZkjB4vqrBDvoYM
|
|
|
Prelude
Legendary
Offline
Activity: 1596
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2015, 04:19:22 PM |
|
If someone could point me in the right direction I'd appreciate it. I have a 4 S4's. Today one of then just stopped hashing. It still runs but just not doing any work, says o ghs on the led. I restart it and it gets up close to the 2TH and then slowly(over 10 mins) goes to 0 again. I updated the firmware, same thing happened. I leave these at work so its a pain in the ass to go there 3 times on a Saturday to reset them. I just got back the final time and as soon as I get home it say zero again. Please and thanks. Is this a symptom that I need a new PSU or is there something wrong with the miner. Thanks again
Try a new SD card with a new image flashed to it.
|
|
|
|
MyRig
Donator
Hero Member
Offline
Activity: 792
Merit: 510
support@myrig.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2015, 10:18:02 PM Last edit: April 19, 2015, 10:30:21 PM by BitmainWarranty |
|
@ jds1119, What pool are you using? It could be the S4 or it could be the pool side or it could be the network restriction. To test the PSU, please disconnect one of the four hashing PCBs from the PSU inside the S4. If the unit remains powered on and continue to hash without any problems, then it could be the PSU being degraded and not able to produce enough power for 4 hashing PCB. Can you try hashing at KANO.IS to see if the miner stay connected and continue to hash? You can try BTCGUILD.COM as well as GHASH.IO. (Process of Elimination here... if the cause is on the pool end or not) FYI: We are hearing more an more Corporate Network being limiting Bitcoin Mining Activities via various way to restrict mining activities from the work place. Tech Support Live Chat: https://v2.zopim.com/widget/livechat.html?key=2ZaJsbRPVUUFCqOE8MmgXgbFFdNYxOBPIf you are having problem with the hashing PCB, please see here for additional info: https://bitmain.zendesk.com/hc/en-us/articles/203361315-Board-DiagnosticsIf you are having problem with a blank S4 LCD screen, please see here: https://bitmain.zendesk.com/hc/en-us/articles/203545769-Blank-LCD-ScreenIf you need to create a bootable S4 MicroSD card, please see here: https://bitmain.zendesk.com/hc/en-us/articles/204339655-How-to-create-a-bootable-MicroSD-card-with-factory-setting-If you are looking for what kind of Alternative Fans for S4 that may fit? (THIS VOIDS THE WARRANTY. PLEASE DO DUE DILIGENCE BEFORE USING ANY THIRD PARTY FANS!) https://bitmain.zendesk.com/hc/en-us/articles/204199879-Antminer-S4-fan-specification-and-possible-replacement-fansFOR S4 PSU ISSUES:If you own Antminer S4 with expired warranty/non-qualifying unit and experiencing the dead S4 PSU with the following LED ERROR STATUS, we may be able to provide the service for you Please include the $25 USD Money Order per returning S4 PSU with a PRINTED RETURN ADDRESS. This DOES NOT GUARANTEE the RESTORED PSU, however, highly likely we can send you the replacement PSU. If the PSU is damaged to the point that it will not power on any ERROR LED, this service will not work for you. MONEY ORDER PAYABLE TO: "BITMAIN" Bitmain Warranty 3700 Quebec Street Unit 100-239 Denver, Colorado 80207 Tel; 844-248-6246 Applies to the non-working PSU showing these LED conditions ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs4.postimg.org%2Fbphn1eg99%2FS4_PSUERROR1.jpg&t=665&c=3gq6tzrCCmBhIw) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs30.postimg.org%2Fhg1i04t8h%2FS4_PSUERROR2.jpg&t=665&c=TiWoDGWaFZ0tQg) If someone could point me in the right direction I'd appreciate it. I have a 4 S4's. Today one of then just stopped hashing. It still runs but just not doing any work, says o ghs on the led. I restart it and it gets up close to the 2TH and then slowly(over 10 mins) goes to 0 again. I updated the firmware, same thing happened. I leave these at work so its a pain in the ass to go there 3 times on a Saturday to reset them. I just got back the final time and as soon as I get home it say zero again. Please and thanks. Is this a symptom that I need a new PSU or is there something wrong with the miner. Thanks again
|
Antminer & DragonMint Repair E-mail: support@myrig.com T: @MyRig_com Return Address: MyRig 3700 Quebec Street, Unit 100-239, Denver, Colorado 80207, USA
|
|
|
jds1119
Newbie
Offline
Activity: 63
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2015, 02:43:24 AM |
|
@ jds1119, What pool are you using? It could be the S4 or it could be the pool side or it could be the network restriction. To test the PSU, please disconnect one of the four hashing PCBs from the PSU inside the S4. If the unit remains powered on and continue to hash without any problems, then it could be the PSU being degraded and not able to produce enough power for 4 hashing PCB. Can you try hashing at KANO.IS to see if the miner stay connected and continue to hash? You can try BTCGUILD.COM as well as GHASH.IO. (Process of Elimination here... if the cause is on the pool end or not) FYI: We are hearing more an more Corporate Network being limiting Bitcoin Mining Activities via various way to restrict mining activities from the work place. Tech Support Live Chat: https://v2.zopim.com/widget/livechat.html?key=2ZaJsbRPVUUFCqOE8MmgXgbFFdNYxOBPIf you are having problem with the hashing PCB, please see here for additional info: https://bitmain.zendesk.com/hc/en-us/articles/203361315-Board-DiagnosticsIf you are having problem with a blank S4 LCD screen, please see here: https://bitmain.zendesk.com/hc/en-us/articles/203545769-Blank-LCD-ScreenIf you need to create a bootable S4 MicroSD card, please see here: https://bitmain.zendesk.com/hc/en-us/articles/204339655-How-to-create-a-bootable-MicroSD-card-with-factory-setting-If you are looking for what kind of Alternative Fans for S4 that may fit? (THIS VOIDS THE WARRANTY. PLEASE DO DUE DILIGENCE BEFORE USING ANY THIRD PARTY FANS!) https://bitmain.zendesk.com/hc/en-us/articles/204199879-Antminer-S4-fan-specification-and-possible-replacement-fansFOR S4 PSU ISSUES:If you own Antminer S4 with expired warranty/non-qualifying unit and experiencing the dead S4 PSU with the following LED ERROR STATUS, we may be able to provide the service for you Please include the $25 USD Money Order per returning S4 PSU with a PRINTED RETURN ADDRESS. This DOES NOT GUARANTEE the RESTORED PSU, however, highly likely we can send you the replacement PSU. If the PSU is damaged to the point that it will not power on any ERROR LED, this service will not work for you. MONEY ORDER PAYABLE TO: "BITMAIN" Bitmain Warranty 3700 Quebec Street Unit 100-239 Denver, Colorado 80207 Tel; 844-248-6246 Applies to the non-working PSU showing these LED conditions http://s4.postimg.org/bphn1eg99/S4_PSUERROR1.jpghttp://s30.postimg.org/hg1i04t8h/S4_PSUERROR2.jpgIf someone could point me in the right direction I'd appreciate it. I have a 4 S4's. Today one of then just stopped hashing. It still runs but just not doing any work, says o ghs on the led. I restart it and it gets up close to the 2TH and then slowly(over 10 mins) goes to 0 again. I updated the firmware, same thing happened. I leave these at work so its a pain in the ass to go there 3 times on a Saturday to reset them. I just got back the final time and as soon as I get home it say zero again. Please and thanks. Is this a symptom that I need a new PSU or is there something wrong with the miner. Thanks again
I use Mining Rig Rentals and through there I mainly use Antpool unless a hip new coin comes out. I have 3 other S4's running the same way: MRR then to Antpool. Today I reformatted a new SD Card and installed it into the miner. After I put it in my details the same thing happened, got up to 2TH and then went back down to 0. MRR shows the miner online but is not hashing. As far as people asking about it being at work, its a small buissness with me and someone else. They know I do this and its part of my compensation since the owner doesn't even pay for power. I have 3 other S4's there running fine and set up the same exact way along with my 5 scrypt machines. But I do appreciate everyone's help. I will look into your suggestions, thanks again and I may be talking to you soon
|
|
|
|
MyRig
Donator
Hero Member
Offline
Activity: 792
Merit: 510
support@myrig.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2015, 03:04:49 AM |
|
Please try with other pools and see if Antpool connection was the cause or not.
Thank you!
|
Antminer & DragonMint Repair E-mail: support@myrig.com T: @MyRig_com Return Address: MyRig 3700 Quebec Street, Unit 100-239, Denver, Colorado 80207, USA
|
|
|
dmwardjr
Legendary
Offline
Activity: 1302
Merit: 1318
Technical Analyst/Trader
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2015, 09:11:02 AM |
|
|
|
|
|
|