margin terminal is now FREE - bots for over 30 exchanges

[deurstopper]

Hi!

First of all, love the bot!
2nd, are there any discord or telegrams to discuss about leonardo's settings and tips??

[leonArdo@margin]

Hi!

First of all, love the bot!
2nd, are there any discord or telegrams to discuss about leonardo's settings and tips??

Thanks

There is a slack channel: https://leonardough-slack.herokuapp.com

[TripToCrypto]

Hi! I am trying to launch latest demo version, but always get this error


What reason with this error might there be?

Hi,

What Windows version are you using?

Best wishes,
Jonathan

Sorry my bad. I must firstly read FAQ on the site

For what platforms is leonArdo available?
It is available for Windows, Mac OS X and Linux. It is 64 bit so please contact us if you are still using a 32 bit machine!

I am with windows 7 x32 with this error.

[jooj]

Please, when we are will able to get profit or losses future on leonArdo and some other strategies as well?

[leonArdo@margin]

Please, when we are will able to get profit or losses future on leonArdo and some other strategies as well?

There is no exact timeline, yet. But we are hiring at the moment to speed up development!

[leonArdo@margin]

Hey Guys,

Jon is traveling at the moment, so I will do my best to represent him here
He will be back soon though!

  Rene

[surgeo]

Hi LeonArdo team 

I have been playing with the demo over the last day before committing to purchase and here are my issues...

1) In Windows 10, the bot starts up and runs ok. After some minutes however I get an error message bot needs to close down.
2) In Linux Ubuntu, running windows .exe via WINE I get the same error message (see pic).

Both these issues are on different machines using different downloads of the latest Windows build.

In both instances when I restart LeonArdo and continue from last time my strategy gone and I can only see 'manual' tab.

I'm new to linux and want to try the linux version but have no clue how to install it (hence WINE) can you show me please?

Error screenshot:
https://image.ibb.co/eJOCCv/1.png
Error Details (Linux WINE):

Code:

Unhandled exception: page fault on write access to 0xdf1152bd in 32-bit code (0x7bc4fbbe).
Register dump:
 CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b
 EIP:7bc4fbbe ESP:00d9d61c EBP:00d9d638 EFLAGS:00210202(  R- --  I   - - - )
 EAX:03d10000 EBX:06e079b0 ECX:df1152b9 EDX:06e05e18
 ESI:40edd82e EDI:7bcd9000
Stack dump:
0x00d9d61c:  06e05e28 00000002 08110000 00001b98
0x00d9d62c:  7bcd9000 03d10000 06e05e18 00d9d668
0x00d9d63c:  7bc4fd89 00001b98 00000002 00240000
0x00d9d64c:  7b0a5500 00d9d658 0000000a 7bc4fcbd
0x00d9d65c:  7bcd9000 00240000 00000002 00d9d6b8
0x00d9d66c:  7bc5056f 372e3738 33343536 00333830
000c: sel=0067 base=00000000 limit=00000000 32-bit r-x
Backtrace:
=>0 0x7bc4fbbe in ntdll (+0x3fbbe) (0x00d9d638)
  1 0x7bc4fd89 in ntdll (+0x3fd88) (0x00d9d668)
  2 0x7bc5056f RtlFreeHeap+0x8e() in ntdll (0x00d9d6b8)
  3 0x7ec60767 in msvcrt (+0x30766) (0x00d9d6e8)
  4 0x7ec611b8 MSVCRT_free+0x17() in msvcrt (0x00d9d6f8)
  5 0x0049c0e3 in leonardo (+0x9c0e2) (0x00d9d7a8)
  6 0x0085c2f1 in leonardo (+0x45c2f0) (0x00d9d7e8)
  7 0x007bbb60 in leonardo (+0x3bbb5f) (0x05331c38)
  8 0x00000001 (0x00a8846c)
  9 0x007b87e0 in leonardo (+0x3b87df) (0x007b8820)
  10 0xa8846c01 (0xc714418b)
0x7bc4fbbe: movl %esi,0x4(%ecx)
Modules:
Module Address Debug info Name (101 modules)
PE   400000-  b9d000 Export          leonardo
PE   da0000- 13bb000 Deferred        qt5widgets
PE 61b40000-62055000 Deferred        qt5gui
PE 63000000-6321d000 Deferred        libeay32
PE 64b40000-64b5b000 Deferred        libwinpthread-1
PE 67940000-6799d000 Deferred        qt5svg
PE 68a80000-68fb1000 Deferred        qt5core
PE 69900000-69a92000 Deferred        qt5network
PE 6aa80000-6ac30000 Deferred        qwindows
PE 6e600000-6e678000 Deferred        ssleay32
PE 6eb40000-6eb64000 Deferred        libgcc_s_dw2-1
PE 6fe40000-6ffbe000 Deferred        libstdc++-6
ELF 7b400000-7b7e0000 Deferred        kernel32<elf>
  \-PE 7b410000-7b7e0000 \               kernel32
ELF 7bc00000-7bcf6000 Dwarf           ntdll<elf>
  \-PE 7bc10000-7bcf6000 \               ntdll
ELF 7c000000-7c004000 Deferred        <wine-loader>
ELF 7da2b000-7da49000 Deferred        libgcc_s.so.1
ELF 7da65000-7daa7000 Deferred        rsaenh<elf>
  \-PE 7da70000-7daa7000 \               rsaenh
ELF 7db66000-7db6d000 Deferred        libnss_dns.so.2
ELF 7db6e000-7db89000 Deferred        cryptnet<elf>
  \-PE 7db70000-7db89000 \               cryptnet
ELF 7dbe0000-7dc17000 Deferred        uxtheme<elf>
  \-PE 7dbf0000-7dc17000 \               uxtheme
ELF 7dc17000-7dc36000 Deferred        wintab32<elf>
  \-PE 7dc20000-7dc36000 \               wintab32
ELF 7dc7c000-7dc83000 Deferred        libxfixes.so.3
ELF 7dc83000-7dc8e000 Deferred        libxcursor.so.1
ELF 7dc8e000-7dca1000 Deferred        libxi.so.6
ELF 7dca1000-7dca5000 Deferred        libxcomposite.so.1
ELF 7dca5000-7dcb2000 Deferred        libxrandr.so.2
ELF 7dcb2000-7dcbe000 Deferred        libxrender.so.1
ELF 7dcbe000-7dcc5000 Deferred        libxxf86vm.so.1
ELF 7dcc5000-7dcc9000 Deferred        libxinerama.so.1
ELF 7dcc9000-7dcd0000 Deferred        libxdmcp.so.6
ELF 7dcd0000-7dcd4000 Deferred        libxau.so.6
ELF 7dcd4000-7dcfa000 Deferred        libxcb.so.1
ELF 7dcfa000-7de45000 Deferred        libx11.so.6
ELF 7de45000-7de5a000 Deferred        libxext.so.6
ELF 7de5c000-7de74000 Deferred        userenv<elf>
  \-PE 7de60000-7de74000 \               userenv
ELF 7de76000-7df03000 Deferred        winex11<elf>
  \-PE 7de80000-7df03000 \               winex11
ELF 7df03000-7df2e000 Deferred        msacm32<elf>
  \-PE 7df10000-7df2e000 \               msacm32
ELF 7df2e000-7dfe6000 Deferred        winmm<elf>
  \-PE 7df40000-7dfe6000 \               winmm
ELF 7dfe6000-7e118000 Deferred        oleaut32<elf>
  \-PE 7e000000-7e118000 \               oleaut32
ELF 7e118000-7e13c000 Deferred        imm32<elf>
  \-PE 7e120000-7e13c000 \               imm32
ELF 7e1ac000-7e1d6000 Deferred        libexpat.so.1
ELF 7e1d6000-7e21f000 Deferred        libfontconfig.so.1
ELF 7e21f000-7e259000 Deferred        libpng16.so.16
ELF 7e259000-7e276000 Deferred        libz.so.1
ELF 7e276000-7e329000 Deferred        libfreetype.so.6
ELF 7e345000-7e36e000 Deferred        iphlpapi<elf>
  \-PE 7e350000-7e36e000 \               iphlpapi
ELF 7e36e000-7e39e000 Deferred        netapi32<elf>
  \-PE 7e370000-7e39e000 \               netapi32
ELF 7e39e000-7e3b7000 Deferred        libresolv.so.2
ELF 7e3bf000-7e3d3000 Deferred        psapi<elf>
  \-PE 7e3c0000-7e3d3000 \               psapi
ELF 7e3d3000-7e3f3000 Deferred        dnsapi<elf>
  \-PE 7e3e0000-7e3f3000 \               dnsapi
ELF 7e3f3000-7e4c2000 Deferred        crypt32<elf>
  \-PE 7e400000-7e4c2000 \               crypt32
ELF 7e4c2000-7e4fc000 Deferred        ws2_32<elf>
  \-PE 7e4d0000-7e4fc000 \               ws2_32
ELF 7e4fc000-7e573000 Deferred        shlwapi<elf>
  \-PE 7e510000-7e573000 \               shlwapi
ELF 7e573000-7e7b5000 Deferred        shell32<elf>
  \-PE 7e580000-7e7b5000 \               shell32
ELF 7e7b5000-7e835000 Deferred        rpcrt4<elf>
  \-PE 7e7c0000-7e835000 \               rpcrt4
ELF 7e835000-7e96e000 Deferred        ole32<elf>
  \-PE 7e850000-7e96e000 \               ole32
ELF 7e96e000-7ea9d000 Deferred        gdi32<elf>
  \-PE 7e980000-7ea9d000 \               gdi32
ELF 7ea9d000-7ebf2000 Deferred        user32<elf>
  \-PE 7eab0000-7ebf2000 \               user32
ELF 7ebf2000-7ec1a000 Deferred        mpr<elf>
  \-PE 7ec00000-7ec1a000 \               mpr
ELF 7ec1a000-7ecdc000 Dwarf           msvcrt<elf>
  \-PE 7ec30000-7ecdc000 \               msvcrt
ELF 7ecdc000-7ed53000 Deferred        advapi32<elf>
  \-PE 7ecf0000-7ed53000 \               advapi32
ELF 7ed53000-7ed66000 Deferred        libnss_files.so.2
ELF 7ed66000-7ed73000 Deferred        libnss_nis.so.2
ELF 7ed73000-7ed8e000 Deferred        libnsl.so.1
ELF 7ef8e000-7efe4000 Deferred        libm.so.6
ELF 7efe6000-7f000000 Deferred        version<elf>
  \-PE 7eff0000-7f000000 \               version
ELF f732a000-f732f000 Deferred        libdl.so.2
ELF f732f000-f74e9000 Deferred        libc.so.6
ELF f74e9000-f7506000 Deferred        libpthread.so.0
ELF f7506000-f7510000 Deferred        libnss_compat.so.2
ELF f7522000-f76d9000 Dwarf           libwine.so.1
ELF f76dc000-f7701000 Deferred        ld-linux.so.2
ELF f7703000-f7704000 Deferred        [vdso].so
Threads:
process  tid      prio (all id:s are in hex)
0000000e services.exe
00000020    0
0000001f    0
00000014    0
00000010    0
0000000f    0
00000012 winedevice.exe
0000001e    0
00000019    0
00000018    0
00000013    0
0000001c plugplay.exe
00000022    0
00000021    0
0000001d    0
00000023 explorer.exe
00000028    0
00000027    0
00000026    0
00000025    0
00000024    0
00000029 (D) C:\Program Files (x86)\mArgin-leonArdo\leonArdo.exe
000000f6    0
000000c9    0
00000054    0
00000053    0
00000052    0
00000045    0
00000044    0
00000043    0
00000042    0
00000040    0
0000003f    0
0000003d    0
00000030    0
0000002f    0
0000002e    0
0000002d    0
0000002c    0
0000002b    0
0000002a    0 <==
System information:
    Wine build: wine-2.0.1
    Platform: i386 (WOW64)
    Version: Windows XP
    Host system: Linux
    Host version: 4.10.0-26-generic

[thedreamer]

Are you running a VM ?
The error you posted lists Win XP running under Linux.

[surgeo]

Are you running a VM ?
The error you posted lists Win XP running under Linux.

No. Must be WINE emulating XP? Point is it does the exact same thing in Windows 10.
Just discovered the earlier build is not crashing.

[dacaldera]

What is the current version of Leonardo? I downloaded a few months ago. Not sure what version I am currently running on my computer. Is there a way to check?

[leonArdo@margin]

What is the current version of Leonardo? I downloaded a few months ago. Not sure what version I am currently running on my computer. Is there a way to check?

To get the most recent version just click on the Update Available link on leonArdo's login screen.

Thanks!

[leonArdo@margin]

Hi,

I'm new to linux and want to try the linux version but have no clue how to install it (hence WINE) can you show me please?

Once you download the leonArdo zip just unpack it and then run the run-leonArdo.sh and you should be ready to go

[surgeo]

Hi,

I'm new to linux and want to try the linux version but have no clue how to install it (hence WINE) can you show me please?

Just download the linux version here:

http://www.marginsoftware.de/downloads.html

unpack the zipfile and then just run the run-leonArdo.sh and you should be ready to go

Just tested and left it going overnight and no crash

I started 4 currency pairs with Bittrex used the default settings of margin trading. Couple of questions...

On all 4 currency pairs it only made 1 buy and 1 sell before stopping. How can I prevent this and have
it to continue trading?

On 3 of the trades it sold for less than the purchase price. How can I prevent this from happening
obvously I don't want it to sell for less than the purchase. I would rather hodl than sell if possible.

Thanks for helping 

[leonArdo@margin]

Hi,

I'm new to linux and want to try the linux version but have no clue how to install it (hence WINE) can you show me please?

Just download the linux version here:

http://www.marginsoftware.de/downloads.html

unpack the zipfile and then just run the run-leonArdo.sh and you should be ready to go

Just tested and left it going overnight and no crash

I started 4 currency pairs with Bittrex used the default settings of margin trading. Couple of questions...

On all 4 currency pairs it only made 1 buy and 1 sell before stopping. How can I prevent this and have
it to continue trading?

On 3 of the trades it sold for less than the purchase price. How can I prevent this from happening
obvously I don't want it to sell for less than the purchase. I would rather hodl than sell if possible.

Thanks for helping 

>> On all 4 currency pairs it only made 1 buy and 1 sell before stopping. How can I prevent this and have it to continue trading?

This happened because stop-loss kicked in. Stop-loss lets you tell the bot the max loss you are willing to accept and when the course drops it will kick in to ensure you only lose that amount. You can switch off this option if you expect the course to bounce back again.

The other parameter you need to watch for when using the mArgin maker bot is the Min Effective Gain % parameter. This ensures the bot will make the gain you want it to make. If for example you set this to 1% it will make sure the sell price is at least 1% higher (taking trading fees into account) than the buy price was - and vice versa.

Another possibility is to use the static ping pong bot and explicitly set fixed buy and sell prices.

Let me know if you have any other questions.

Best wishes,
Jonathan

[surgeo]

Hi,

I'm new to linux and want to try the linux version but have no clue how to install it (hence WINE) can you show me please?

Just download the linux version here:

http://www.marginsoftware.de/downloads.html

unpack the zipfile and then just run the run-leonArdo.sh and you should be ready to go

Just tested and left it going overnight and no crash

I started 4 currency pairs with Bittrex used the default settings of margin trading. Couple of questions...

On all 4 currency pairs it only made 1 buy and 1 sell before stopping. How can I prevent this and have
it to continue trading?

On 3 of the trades it sold for less than the purchase price. How can I prevent this from happening
obvously I don't want it to sell for less than the purchase. I would rather hodl than sell if possible.

Thanks for helping 

>> On all 4 currency pairs it only made 1 buy and 1 sell before stopping. How can I prevent this and have it to continue trading?

This happened because stop-loss kicked in. Stop-loss lets you tell the bot the max loss you are willing to accept and when the course drops it will kick in to ensure you only lose that amount. You can switch off this option if you expect the course to bounce back again.

The other parameter you need to watch for when using the mArgin maker bot is the Min Effective Gain % parameter. This ensures the bot will make the gain you want it to make. If for example you set this to 1% it will make sure the sell price is at least 1% higher (taking trading fees into account) than the buy price was - and vice versa.

Another possibility is to use the static ping pong bot and explicitly set fixed buy and sell prices.

Let me know if you have any other questions.

Best wishes,
Jonathan

Cheers for the reply and help Jonathan. Can you show me where to turn off the stop loss in version 3.3.0

[drnkk]

Do you have any shot-term plan for cryptopia Exchange?

[leonArdo@margin]

Do you have any shot-term plan for cryptopia Exchange?

No short term plans.

What's are the volumes like there?

[hoop]

Hi,

I'm new to linux and want to try the linux version but have no clue how to install it (hence WINE) can you show me please?

Just download the linux version here:

http://www.marginsoftware.de/downloads.html

unpack the zipfile and then just run the run-leonArdo.sh and you should be ready to go

Just tested and left it going overnight and no crash

I started 4 currency pairs with Bittrex used the default settings of margin trading. Couple of questions...

On all 4 currency pairs it only made 1 buy and 1 sell before stopping. How can I prevent this and have
it to continue trading?

On 3 of the trades it sold for less than the purchase price. How can I prevent this from happening
obvously I don't want it to sell for less than the purchase. I would rather hodl than sell if possible.

Thanks for helping 

>> On all 4 currency pairs it only made 1 buy and 1 sell before stopping. How can I prevent this and have it to continue trading?

This happened because stop-loss kicked in. Stop-loss lets you tell the bot the max loss you are willing to accept and when the course drops it will kick in to ensure you only lose that amount. You can switch off this option if you expect the course to bounce back again.

The other parameter you need to watch for when using the mArgin maker bot is the Min Effective Gain % parameter. This ensures the bot will make the gain you want it to make. If for example you set this to 1% it will make sure the sell price is at least 1% higher (taking trading fees into account) than the buy price was - and vice versa.

Another possibility is to use the static ping pong bot and explicitly set fixed buy and sell prices.

Let me know if you have any other questions.

Best wishes,
Jonathan

Cheers for the reply and help Jonathan. Can you show me where to turn off the stop loss in version 3.3.0

You just need to check box stop loss , you will good to go with or without stop loss option.
 

[surgeo]

Hi,

I'm new to linux and want to try the linux version but have no clue how to install it (hence WINE) can you show me please?

Just download the linux version here:

http://www.marginsoftware.de/downloads.html

unpack the zipfile and then just run the run-leonArdo.sh and you should be ready to go

Just tested and left it going overnight and no crash

I started 4 currency pairs with Bittrex used the default settings of margin trading. Couple of questions...

On all 4 currency pairs it only made 1 buy and 1 sell before stopping. How can I prevent this and have
it to continue trading?

On 3 of the trades it sold for less than the purchase price. How can I prevent this from happening
obvously I don't want it to sell for less than the purchase. I would rather hodl than sell if possible.

Thanks for helping 

>> On all 4 currency pairs it only made 1 buy and 1 sell before stopping. How can I prevent this and have it to continue trading?

This happened because stop-loss kicked in. Stop-loss lets you tell the bot the max loss you are willing to accept and when the course drops it will kick in to ensure you only lose that amount. You can switch off this option if you expect the course to bounce back again.

The other parameter you need to watch for when using the mArgin maker bot is the Min Effective Gain % parameter. This ensures the bot will make the gain you want it to make. If for example you set this to 1% it will make sure the sell price is at least 1% higher (taking trading fees into account) than the buy price was - and vice versa.

Another possibility is to use the static ping pong bot and explicitly set fixed buy and sell prices.

Let me know if you have any other questions.

Best wishes,
Jonathan

Cheers for the reply and help Jonathan. Can you show me where to turn off the stop loss in version 3.3.0

You just need to check box stop loss , you will good to go with or without stop loss option.
 

There is no box labeled 'stop loss' in version 3.3.0. Is the software able to make new trades while holding the old ones? If so how please.
Example stock buy @100 > falls to 75 > buy @75 falls to 50 buy @50 > rises to 80 sells 2nd buy @80.

[leonArdo@margin]

Hi,

I'm new to linux and want to try the linux version but have no clue how to install it (hence WINE) can you show me please?

Just download the linux version here:

http://www.marginsoftware.de/downloads.html

unpack the zipfile and then just run the run-leonArdo.sh and you should be ready to go

Just tested and left it going overnight and no crash

I started 4 currency pairs with Bittrex used the default settings of margin trading. Couple of questions...

On all 4 currency pairs it only made 1 buy and 1 sell before stopping. How can I prevent this and have
it to continue trading?

On 3 of the trades it sold for less than the purchase price. How can I prevent this from happening
obvously I don't want it to sell for less than the purchase. I would rather hodl than sell if possible.

Thanks for helping 

>> On all 4 currency pairs it only made 1 buy and 1 sell before stopping. How can I prevent this and have it to continue trading?

This happened because stop-loss kicked in. Stop-loss lets you tell the bot the max loss you are willing to accept and when the course drops it will kick in to ensure you only lose that amount. You can switch off this option if you expect the course to bounce back again.

The other parameter you need to watch for when using the mArgin maker bot is the Min Effective Gain % parameter. This ensures the bot will make the gain you want it to make. If for example you set this to 1% it will make sure the sell price is at least 1% higher (taking trading fees into account) than the buy price was - and vice versa.

Another possibility is to use the static ping pong bot and explicitly set fixed buy and sell prices.

Let me know if you have any other questions.

Best wishes,
Jonathan

Cheers for the reply and help Jonathan. Can you show me where to turn off the stop loss in version 3.3.0

You just need to check box stop loss , you will good to go with or without stop loss option.
 

There is no box labeled 'stop loss' in version 3.3.0. Is the software able to make new trades while holding the old ones? If so how please.
Example stock buy @100 > falls to 75 > buy @75 falls to 50 buy @50 > rises to 80 sells 2nd buy @80.

No, you are right, stop-loss only arrived in our last 3.4 release.

There is no way with version 3.3 that a bot could have sold for less than it bought unless the Min Effective gain was set to a minus value.

Both current bots are swing trade bots that switch from a buy/sell state to a sell/buy one. They cannot do what you described there.

We will be bringing out a host of new bots in the fall.

Best wishes,
Jonathan