Exit_left
Newbie
Activity: 7
Merit: 0
|
 |
June 09, 2018, 05:27:08 PM |
|
How to disable that anoyying reset clocks and memory when miner is quitting ?
The program always keeps crashing and my rig freezes.
I don't believe you can, nor would you probably want to. What kind of cards and what driver version are you running? |
|
|
|
|
calebkan
Newbie
Activity: 19
Merit: 0
|
|
June 09, 2018, 08:56:33 PM |
|
so noone doing restart their rigs..and phoenix team didnt answer to me  i want to restart my rig when rig freezer..how can i do this?what i must write my my file? |
|
|
|
|
duyvu1311
Newbie
Activity: 13
Merit: 0
|
|
June 10, 2018, 03:40:47 AM |
|
- Your -gser param is so magic! It makes my GPUs hang at start-up. Error msg: GPUx not responding!
- if not specify -gt param, my rigs often crash when it is auto-tuning.
|
|
|
|
|
Mathero11
Jr. Member
Activity: 36
Merit: 12
|
|
June 10, 2018, 01:11:15 PM |
|
so noone doing restart their rigs..and phoenix team didnt answer to me i want to restart my rig when rig freezer..how can i do this?what i must write my my file? when your whole rig freezes (unable to do anything in windows) you need a external piece of hardware to do it. something like this cost $5 from aliexpress  |
|
|
|
|
calebkan
Newbie
Activity: 19
Merit: 0
|
|
June 10, 2018, 01:54:50 PM |
|
ty for answer..but not whole rig..i want to restart my rig when gpu freeze or miner..claymore using -r 1...phoenix ? i am using -rmode 2 but didnt work |
|
|
|
|
polofitted007
Newbie
Activity: 27
Merit: 0
|
|
June 10, 2018, 01:55:54 PM |
|
Is there a way to name the rig besides putting it behind the wallet address? My pool doesn't like that format...
|
|
|
|
|
Mathero11
Jr. Member
Activity: 36
Merit: 12
|
|
June 10, 2018, 02:18:04 PM |
|
so noone doing restart their rigs..and phoenix team didnt answer to me i want to restart my rig when rig freezer..how can i do this?what i must write my my file? when your whole rig freezes (unable to do anything in windows) you need a external piece of hardware to do it. something like this cost $5 from aliexpress ty for answer..but not whole rig..i want to restart my rig when gpu freeze or miner..claymore using -r 1...phoenix ? i am using -rmode 2 but didnt work -r 1 does work in phoenix too, make sure you have a reboot.bat in the same folder with same parameters as start_miner. but restarting the rig (computer u mean?) im not sure its possible with phoenix. i've made a program myself to handle it. Is there a way to name the rig besides putting it behind the wallet address? My pool doesn't like that format...
-eworker rig1 |
|
|
|
|
calebkan
Newbie
Activity: 19
Merit: 0
|
|
June 10, 2018, 03:02:39 PM |
|
ty for answer..but not whole rig..i want to restart my rig when gpu freeze or miner..claymore using -r 1...phoenix ? i am using -rmode 2 but didnt work -r 1 does work in phoenix too, make sure you have a reboot.bat in the same folder with same parameters as start_miner. but restarting the rig (computer u mean?) im not sure its possible with phoenix. i've made a program myself to handle it. Is there a way to name the rig besides putting it behind the wallet address? My pool doesn't like that format...
-eworker rig1 ok ty bro.. |
|
|
|
|
ant17
Newbie
Activity: 7
Merit: 0
|
|
June 10, 2018, 03:20:09 PM |
|
Hi to all, I have a little problem with phenixminer, I try 3.0a , b and c
Actually I use claymore with mi rig ( 5x rx580 8gb) and the hashrate for any card is about 31.2 to 32 mh/s with a consumption about 87w for card with driver amd for blockchain; card are not flashed, original bios
Sorry but there is absolutely no way you are getting 31-32 MH/s at 87W with factory bios on a 580. as a matter of fact you couldn't get 25 without flash. no, is absolutely possible, instead of flash bios I add this parameter in phoenix comand line: -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 950. Seeing is believing In my rig, only 1 of 6 card is flash with custom bios (my first card  ) , and I do not know why, this card consumes 105w Well I bet you are seeing the consumption of energy through software... I bet 1 eth if you measure at the wall you'll see around 700-800watts maybe more... |
|
|
|
|
Stihlus
Newbie
Activity: 31
Merit: 0
|
|
June 10, 2018, 09:35:38 PM |
|
ty for answer..but not whole rig..i want to restart my rig when gpu freeze or miner..claymore using -r 1...phoenix ? i am using -rmode 2 but didnt work -r 1 does work in phoenix too, make sure you have a reboot.bat in the same folder with same parameters as start_miner. but restarting the rig (computer u mean?) im not sure its possible with phoenix. i've made a program myself to handle it. Is there a way to name the rig besides putting it behind the wallet address? My pool doesn't like that format...
-eworker rig1 ok ty bro.. Hi, You don't need a program for that, use "-rmode 2" in your Phoenix miner line command and in the same folder you must have "reboot.bat" file with "shutdown /r /t 5 /f". Regards |
|
|
|
|
saga56
Newbie
Activity: 6
Merit: 0
|
|
June 11, 2018, 09:59:39 AM |
|
9,5hours running, it seams stales shares increased on 3.0c, anyone sees this behaviour?
|
|
|
|
|
calebkan
Newbie
Activity: 19
Merit: 0
|
|
June 11, 2018, 04:49:31 PM |
|
ty for answer..but not whole rig..i want to restart my rig when gpu freeze or miner..claymore using -r 1...phoenix ? i am using -rmode 2 but didnt work -r 1 does work in phoenix too, make sure you have a reboot.bat in the same folder with same parameters as start_miner. but restarting the rig (computer u mean?) im not sure its possible with phoenix. i've made a program myself to handle it. Is there a way to name the rig besides putting it behind the wallet address? My pool doesn't like that format...
-eworker rig1 ok ty bro.. Hi, You don't need a program for that, use "-rmode 2" in your Phoenix miner line command and in the same folder you must have "reboot.bat" file with "shutdown /r /t 5 /f". Regards ah ty ..thats it..i want to know that..i am trying now ty |
|
|
|
|
Yarik47
Newbie
Activity: 36
Merit: 0
|
|
June 12, 2018, 06:25:18 AM
Last edit: June 12, 2018, 06:52:30 AM by Yarik47 |
|
Hello guys, hello PhoenixMiner.
I decided to try the phoenix miner, I liked it, the speed of hashing is slightly larger than on the claymore. But after 9 hours the speed of the farm 5*msi GTX1070 GamingX 32Mh/s fell to 27, and the second farm 5*msi GTX1060 GamingX 6Gb completely disconnected with an error(cuda error 749) .. What's the problem?
And yet - my farm 5* RX550 4Gb, in the claymore they show 13.8 each, and the phoenix miner is only 12.5. What is wrong I do?
P.s. sorry for my English))
|
|
|
|
|
newmz
Sr. Member
Activity: 372
Merit: 250
The road of excess leads to the palace of wisdom
|
|
June 12, 2018, 08:40:31 AM |
|
Sorry if this is rude to post here in the thread of someone with a devfee miner... but why do all you people use a devfee miner? I use ethminer 0.15.0rc1 from https://github.com/ethereum-mining/ethminer/releases for a few days which has no devfee at all. I'm using 6 x 1070s and 2 x 1080 (with OhGodAnETHlargementPill) and 270-280mh/s on Nanopool. That's average of around 32.4mh/s for each 1070 and around 34mh/s for each 1080. Do you do better than that with Claymore or Phoenixminer? |
Crypto currency enthusiast and miner since 2015. Mined approx 200 ETH during 2016 and 2017 and sold it at approximately $US40 each. Then I watched it reach $1000+ each. If anyone bothers to read this stuff pay attention to this: HODL HODL HODL HODL HODL HODL
I started mining with 1 AMD 7950 and 1 R9-280X. Then I gradually built my AMD operation into 12 R9-290s. Awesome ETH hash but ridiculous power consumption and heat. Over the last year I defected to the Nvidia team. I now use GTX 1070s. They were expensive to buy (probably a bargain now) but awesome hash rate vs. power consumption. blah blah blah blah
|
|
|
Yarik47
Newbie
Activity: 36
Merit: 0
|
|
June 12, 2018, 08:48:38 AM |
|
Sorry if this is rude to post here in the thread of someone with a devfee miner... but why do all you people use a devfee miner? I use ethminer 0.15.0rc1 from https://github.com/ethereum-mining/ethminer/releases for a few days which has no devfee at all. I'm using 6 x 1070s and 2 x 1080 (with OhGodAnETHlargementPill) and 270-280mh/s on Nanopool. That's average of around 32.4mh/s for each 1070 and around 34mh/s for each 1080. Do you do better than that with Claymore or Phoenixminer? OhGodAnETHlargementPill does not work with 1070 .. only with 1080 and 1080i! and 34 at 1080 very little .. should be about 38-42 .. |
|
|
|
|
Digital_Seytan
Jr. Member
Activity: 222
Merit: 2
digiseytan@walletofsatoshi.com
|
|
June 12, 2018, 09:45:44 AM |
|
Sorry if this is rude to post here in the thread of someone with a devfee miner... but why do all you people use a devfee miner? I use ethminer 0.15.0rc1 from https://github.com/ethereum-mining/ethminer/releases for a few days which has no devfee at all. I'm using 6 x 1070s and 2 x 1080 (with OhGodAnETHlargementPill) and 270-280mh/s on Nanopool. That's average of around 32.4mh/s for each 1070 and around 34mh/s for each 1080. Do you do better than that with Claymore or Phoenixminer? Ethmining is much easier with this program, in the folder you can download the latest version of etminer. WiNEther Miner is a graphical interface to use with ethminer with advanced watchdog options and monitoring................. . .. Download : https://github.com/digitalpara/WiNETH |
DonateSATS:Digiseytan@WALLETOFSATOSHi.COM
SHOPFREE: https://satsback.com/register/1QEJyGPlg4LN5kwx
ETC+Zil Pool:https://k1pool.com/invite/895eb07555
|
|
|
53nsk
Newbie
Activity: 26
Merit: 0
|
|
June 12, 2018, 09:50:49 AM |
|
Sorry if this is rude to post here in the thread of someone with a devfee miner... but why do all you people use a devfee miner? I use ethminer 0.15.0rc1 from https://github.com/ethereum-mining/ethminer/releases for a few days which has no devfee at all. I'm using 6 x 1070s and 2 x 1080 (with OhGodAnETHlargementPill) and 270-280mh/s on Nanopool. That's average of around 32.4mh/s for each 1070 and around 34mh/s for each 1080. Do you do better than that with Claymore or Phoenixminer? Tried ethminer, claymore and phoenix on 3 mixed amd rigs, getting more shares with phoenix. |
|
|
|
|
|
Iamtutut
|
|
June 12, 2018, 10:12:12 AM |
|
Sorry if this is rude to post here in the thread of someone with a devfee miner... but why do all you people use a devfee miner? I use ethminer 0.15.0rc1 from https://github.com/ethereum-mining/ethminer/releases for a few days which has no devfee at all. I'm using 6 x 1070s and 2 x 1080 (with OhGodAnETHlargementPill) and 270-280mh/s on Nanopool. That's average of around 32.4mh/s for each 1070 and around 34mh/s for each 1080. Do you do better than that with Claymore or Phoenixminer? That's not impressive, I reach almost 31,5MH/s with 2 of my RX 570s on Phoenix, and they are at least 50% than a 1070. 1080 with pill should be around 50MH/s. We've seen reports of this kind of pseed with ETH pill & Phoenix. I don't think you earn more on ethminer rather than with Phoenix and its 0,65% devfee. You could buy a sub 15$ win 10 licence and compare. |
|
|
|
|
erkange
Jr. Member
Activity: 76
Merit: 2
|
|
June 12, 2018, 01:31:57 PM |
|
Sorry if this is rude to post here in the thread of someone with a devfee miner... but why do all you people use a devfee miner? I use ethminer 0.15.0rc1 from https://github.com/ethereum-mining/ethminer/releases for a few days which has no devfee at all. I'm using 6 x 1070s and 2 x 1080 (with OhGodAnETHlargementPill) and 270-280mh/s on Nanopool. That's average of around 32.4mh/s for each 1070 and around 34mh/s for each 1080. Do you do better than that with Claymore or Phoenixminer? That's not impressive, I reach almost 31,5MH/s with 2 of my RX 570s on Phoenix, and they are at least 50% than a 1070. 1080 with pill should be around 50MH/s. We've seen reports of this kind of pseed with ETH pill & Phoenix. I don't think you earn more on ethminer rather than with Phoenix and its 0,65% devfee. You could buy a sub 15$ win 10 licence and compare. I never got good results for Rx570 and phoenix. Can you share your settings? |
|
|
|
|
DireWolfM14
Copper Member
Legendary
Activity: 2870
Merit: 5665
|
|
June 12, 2018, 02:59:23 PM |
|
That's not impressive, I reach almost 31,5MH/s with 2 of my RX 570s on Phoenix, and they are at least 50% than a 1070.
1080 with pill should be around 50MH/s. We've seen reports of this kind of pseed with ETH pill & Phoenix.
I don't think you earn more on ethminer rather than with Phoenix and its 0,65% devfee. You could buy a sub 15$ win 10 licence and compare.
I get 32.5 out of my 1070s and 37.1 out of my pilled up 8GB 1080s (averages.) I think those getting 50Mh/s are running 1080ti with 11GB. |
|
|
|
|
